Mössbauer effect at <Superscript>119</Superscript>Sn<Superscript>4+</Superscript> nuclei in fine crystalline MnO

The hyperfine structure of the low-temperature Mössbauer spectra of dopant ¹¹⁹Sn⁴⁺ ions (0.4 at. %) in a fine crystalline MnO sample, characterized by X-ray diffraction and magnetic measurements, has been studied. The ¹¹⁹Sn spectra show that tin is distributed over positions with an inhomogeneous cationic environment. The appearance of such positions is explained by the local compensation for the excess charge of Sn⁴⁺ by manganese vacancies V _Mn and segregation of defects resulting in precipitation of MnSnO₃ clusters. The non-uniform distribution of Sn⁴⁺ and the related dependence of the number of broken magnetic bonds on the local tin concentration are responsible for the fluctuation of the T _N values, which is “perceived” by ¹¹⁹Sn in different MnO crystallites. The ¹¹⁹Sn spectra exclude the possibility that tin enters into the composition of superpara-magnetic particles.     

Mössbauer diagnosis of the electronic structure and local environment of <Superscript>119</Superscript>Sn in MgTiO<Subscript>3</Subscript>

Annealing of a hydroxide precursor containing equimolar amounts of Mg²⁺ and Ti⁴⁺ and small additions of Sn⁴⁺ (0.1 at %) in air at 900°C leads to titanate MgTiO₃ with an ilmenite structure. The ¹¹⁹Sn Mössbauer spectrum of the sample (unresolved doublet with the isomer shift δ = 0.10 ± 0.01 mm/s and the quadrupole splitting Δ = 0.49 ± 0.02 mm/s) is evidence that the tin atoms are still in the oxidation state +4. Annealing of the precursor at the same temperature in a hydrogen atmosphere yields MgTiO₃ containing Sn²⁺ ions (a doublet at δ = 2.82 ± 0.01 mm/s and Δ = 1.66 ± 0.03 mm/s) (the Sn²⁺/MgTiO₃ sample). According to the spectral parameters, the ¹¹⁹Sn²⁺ ions have a low coordination number (CN ? 6) and are abnormally resistant to reduction to the metal. Analogous features of the crystal-chemical behavior of ¹¹⁹Sn²⁺ were previously observed during the Mössbauer study of the samples containing tin on the surface of Cr₂O₃, α-Al₂O₃, and MgO crystallites. The conclusion drawn from analysis of the ¹¹⁹Sn²⁺ Mössbauer parameters that tin in the Sn²⁺/MgTiO₃ sample has surface localization was supported by X-ray photoelectron spectroscopy. Mössbauer measurements show that the tin of Sn²⁺/MgTiO₃ when in contact with air is oxidized much more slowly than on the surface of Cr₂O₃, α-Al₂O₃, or MgO crystallites. The inhibition of the oxidation reaction is explained to be due to passivation of adsorbed O₂ molecules caused by their interaction with mobile t _2g electrons of Ti³⁺ forming in titanate during high-temperature annealing in H₂. In addition to the Sn²⁺ doublet, the ¹¹⁹Sn spectrum shows a spectral component with parameters (δ ～ 1.6 mm/s, Δ ≤ 0.2 mm/s) not fitting the known tin species that can form in MgTiO₃. This component is explained by persistence in titanate of some Sn⁴⁺ ions immobilizing the mobile t _2g electron at one of their neighboring Ti⁴⁺ cations.     

Electronic state and local surrounding of <Superscript>119</Superscript>Sn in calcium-substituted holmium orthochromites

The influence of Ca²⁺ doped into the holmium sublattice on the magnetically active surrounding of Sn⁴⁺ ions located in the chromium sublattice of Ho_1–x Ca _x Cr_0.997Sn_0.003O₃ (x = 0, 0.003, and 0.1) compounds was studied by ¹¹⁹Sn Mössbauer spectroscopy. At concentrations [Ca] = [Sn] = 0.3 mol %, an increase was observed in the spectral contribution of Sn⁴⁺ sites, having the full number of nearest-neighbor Cr³⁺cations (n = 6), where they perceived a magnetic field H(Sn)_{4.2 K} = 82 kOe, compared to the contribution of the relevant sites in the undoped chromite (x = 0). This observation was interpreted as resulting from a reduced probability of appearance of Cr³⁺ vacancies in the nearest surrounding of heterovalent Sn⁴⁺ ions. For x = 0.1, on the contrary, the ¹¹⁹Sn spectrum revealed a reduced contribution from the Sn⁴⁺ sites with n = 6. This evolution is shown not to be due neither to the appearance of Cr⁴⁺ nor Cr⁶⁺ ions in the nearest neighborhood of Sn⁴⁺ in the chromium sublattice to balance the charge deficiency of the Ca²⁺ ions doped into the holmium sublattice. This allowed us to suggest that the observed effect was due to the onset of Sn⁴⁺ segregations in the structure of Ho_0.9Ca_0.1Cr_0.997Sn_0.003O₃, which contained a far greater amount of Ca²⁺ ions whose charge deficiency was balanced mostly by Cr⁴⁺ formation. Studies of samples that were prepared under a hydrogen atmosphere revealed the reduction of Sn⁴⁺ to the oxidation state +2, with the concomitant stabilization of the formed Sn²⁺ ions on crystallite surfaces on sites having low coordination numbers.     

Local structure and hyperfine interactions of Fe and Sn atoms in brownmillerite-like ferrite Sr2Fe1.98Sn0.02O5+x

Mössbauer spectroscopy has been applied for studying local environment of ⁵⁷Fe and ¹¹⁹Sn probe atoms within tin-doped Sr₂Fe_1.98Sn_0.02O_5+x (x?0.02) ferrite with the brownmillerite-type structure. ⁵⁷Fe Mössbauer spectra indicate no appreciable local distortions induced by the tin dopant atoms. The ¹¹⁹Sn spectra recorded below the magnetic ordering temperature (T_N) can be described as a superposition of two Zeeman sextets, which indicate that Sn⁴⁺ dopant ions are located in two non-equivalent crystallographic and magnetic sites. The observed hyperfine parameters were discussed supposing Sn⁴⁺ cations to replace iron cations in the octahedral (Sn_O) and tetrahedral (Sn_T) sublattices. It has been supposed that Sn⁴⁺ cations being stabilized in the tetrahedral sublattice complete their nearest anion surrounding up to the octahedral oxygen coordination “Sn_T⁴⁺”. Annealing of the Sr₂Fe_1.98Sn_0.02O_5+x in helium flux conditions at 950°C leads to formation of divalent Sn²⁺ cations with a simultaneous decrease of the contribution for the Sn_T⁴⁺ sub-spectrum. The parameters of combined electric and magnetic hyperfine interactions of the ¹¹⁹Sn²⁺ sub-spectrum underline that impurity atoms are stabilized in the sp³d-hybrid state in the oxygen distorted tetragonal pyramid. The analysis of the ¹¹⁹Sn spectra indicates a chemical reversibility of the processes Sn_T²⁺?Sn_T⁴⁺ within the tetrahedral sublattice of the brownmillerite-type ferrite.     

Mössbauer-Messungen an Sn2O3

Mössbauer Studies on Sn₂O₃ Mössbauer data for ¹¹⁹Sn in Sn₂O₃ show this compound to contain bivalent and tetravalent tin. Whereas tin(IV) is coordinated in a similar way in Sn₂O₃ and SnO₂, a rather large quadrupole splitting indicates an environment of low symmetry for tin(II).     

Study on the oxygen exchange capacities of Ce<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> pyrochlore

Ce₂Sn₂O₇ pyrochlore was synthesized by a hydrothermal method. X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to characterize the composition and valence state of the sample. The oxygen exchange property of the Ce₂Sn₂O₇ phase was measured by an oxidation reaction in sealed air atmosphere and a followed reduction reaction in 5% H₂-95% N₂ atmosphere. Gas chromatography (GC) was used to analyze the oxygen change in the reaction. The results show that Ce₂Sn₂O₇ sample has excellent oxygen absorption capacity at 250°C as Ce³⁺ ions are oxidized to Ce⁴⁺ ions. The oxidized sample can be reduced by 5% H₂-95% N₂. The refreshed sample remains the capacity of oxygen absorption, while the oxygen exchange capacity degrades with the reduction times.     

<Superscript>119</Superscript>Sn Mössbauer study of the influence of a gas atmosphere on the valence state and distribution of tin atoms in the MgO structure

Analysis of the Mössbauer spectra of dopant ¹¹⁹Sn in cubic MgO has demonstrated that the Sn²⁺ ions can be stabilized on the surface of crystallites of an oxide with a structure differing from the corundum structure. The Mössbauer parameters (at 100 K, the isomer shift is δ = 2.50 ± 0.01 mm/s and the quadrupole splitting is Δ = 2.30 ± 0.02 mm/s) point to the stereochemical activity of the lone pair of Sn²⁺. Being in contact with oxygen at 295 K, tin is rapidly converted to the tetravalent state (δ = 0.08 ± 0.01 mms, Δ = 0.58 ± 0.01 mm/s). The lack of formation of Sn²⁺ on the surface of another cubic oxide (MnO) can be explained by rapid segregation of tin from the bulk of crystallites as stannate clusters.     

The effect of tin precursors on the formation of Zr<Subscript>0.8</Subscript>Sn<Subscript>0.2</Subscript>TiO<Subscript>4</Subscript> nano-powder by sol gel process

Different precursors can have different effects upon the properties of materials. In this paper, two different tin precursors, i.e., tin (IV) chloride pentahydrate (SnCl₄·5H₂O) and tin (IV) t-butoxide (Sn(OC₄H₉)₄) have been used to prepare Zr_0.8Sn_0.2TiO₄ powders. The dry gel and powder were characterized by Simultaneous DTA/TGA analysis (SDT), X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Accelerated surface area and porosimetry analyzer (ASAP). The results show less weight loss for dry gel from precursor SnCl₄·5H₂O than that of Sn(OC₄H₉)₄. The onset of polycrystalline ZST nano powders occurred at 450 °C from precursor SnCl₄·5H₂O which is 50 °C lower than that of Sn(OC₄H₉)₄. Even though the powders from SnCl₄·5H₂O had a specific surface area of 30.4 m²/g which is higher than that of 28.7 m²/g from Sn(OC₄H₉)₄. The crystallite size of ZST powders were about the same around 15 nm. This may be due to the powders are more aggregated in Sn(OC₄H₉)₄ system. Two major mechanisms are proposed for above differences in morphology and the formation of powders.     

5<Emphasis Type="Italic">s</Emphasis>5<Emphasis Type="Italic">p</Emphasis> element dopant cations: Møssbauer probes for studying chemical reactions at the solid-gas interface

Annealing in reducing atmosphere allows stabilization of the Sn⁴⁺, Sb⁵⁺, or Te⁶⁺ dopant cations in a lower oxidation state. Due to its stereochemical activity, the lone electron pair of the resulting Sn²⁺, Sb³⁺, or Te⁴⁺ favors the location of these species in low-coordination sites, immediately on the surface of the substrate-compound crystallites. This allows ¹¹⁹Sn, ¹²¹Sb, or ¹²⁵Te Møssbauer spectroscopy to be applied for studying the processes occurring at the solid-gas interface. Results of such studies, mainly devoted to the Cr₂O₃ antiferromagnetic substrate, were discussed, along with the prospects of searching appropriate substrate-compounds of other types.     

Successful location of tin dopant cations on surface sites of anatase-type TiO2 crystallites evidenced by 119Sn Mössbauer spectroscopic probe and XPS techniques

The present study provides the first experimental evidence for the stabilization of tin dopant cations immediately on the surface of an oxide having a tetragonal structure. ¹¹⁹Sn Mössbauer spectra of the dopant, introduced by air annealing into the bulk of anatase microcrystals, showed that it was located, in the tetravalent state, in somewhat distorted octahedral sites of a unique type. On the contrary, the reduced tin species, formed upon subsequent hydrogen annealing the Sn⁴⁺-doped samples, are found to occupy different sites being characterized by two sets of the isomer shift δ and quadrupole splitting ΔE_Q values (δ_I = 3.25 mm s⁻¹, ΔE_QI = 1.75 mm s⁻¹; and δ_II = 2.85 mm s⁻¹, ΔE_QII = 1.71 mm s⁻¹). Either of them implies both the divalent state of tin atoms and their presence at low-coordination sites that can be assigned to the surface of crystallites. Mössbauer spectra of Sn^4+←2+ daughter ions, formed upon contact with air of Sn²⁺, consist of a symmetrically broadened peak characterized by only slightly different average values of both the isomer shift (<δ> = 0.07 mm s⁻¹) and quadrupole splitting (<ΔE_Q> = 0.50 mm s⁻¹), as compared to the δ and ΔE_Q values for the bulk-located Sn⁴⁺. However, considerable broadening of Sn^4+←2+ doublet components (Γ = 0.97 mm s⁻¹) allows one to suggest that these secondary formed ions remain distributed over the non equivalent sites inherited from their Sn²⁺ precursors. The occurrence of Sn^4+←2+ at surface sites is independently proven by XPS measurements that revealed a greater than 10-fold enrichment with tin of 3–5 nm thick surface layers.     

The influence of structural factors on the gas-sensitive properties of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-SnO<Subscript>2</Subscript>

The influence of the dispersity and structural and phase state of oxide materials based on Fe₂O₃ and SnO₂ on the gas-sensitive properties of these materials used as sensitive layers in chemical sensors was considered. It was found that high-dispersity Fe₂O₃-SnO₂ (Fe: Sn = 9: 1) ceramic layers possessed high sensitivity to ethanol vapor in both dry and humid atmosphere and low sensitivity to CO and CH₄. The maximum response to ethanol vapor in humid atmosphere was characteristic of layers with structures of substitution-interstitial solid solutions of Sn⁴⁺ in α-Fe₂O₃.     

Synthesis,structure and cytotoxic activity of diethyltin N‐[(2‐oxyphenyl)methylene]phenylalaninates

Four new diethyltin N‐[(2‐oxyphenyl)methylene]phenylalaninates, (CH₃CH₂)₂Sn[2‐O‐3‐X‐5‐YC₆H₂CH?NCH(CH₂Ph)COO] (X, Y = H, H, 1 ; H, Br, 2 ; H, OCH₃, 3 ; Br, Br, 4 ), have been synthesized and characterized using elemental analysis and infrared and NMR (¹H, ¹³C and ¹¹⁹Sn) spectra. The crystal structures of 1 , 2 , 3 , 4 have been determined. Compounds 1 and 2 have a 12‐membered macrocyclic structure with a trimeric [Sn₃O₆C₃] core. Each tin atom is six‐coordinated in distorted [SnC₂NO₃] octahedral geometry. Compound 3 is a centrosymmetric weak dimer in which the two tin centers are linked by two asymmetric Sn? O???Sn bridges involving the phenolic oxygen of the ligand and two Sn???O interactions from ether oxygen of the adjacent ligand. The coordination geometry of the tin atom can be described as a distorted pentagonal bipyramid with two ethyl groups in axial positions. Compound 4 is a novel binuclear tin complex, formed by the carboxylate of a ligand asymmetrically bridging two tin atoms, which contains a five‐coordinated tin and a six‐coordinated tin. Bioassay results have shown that the compounds have weak in vitro activity against two human tumor cell lines, A549 and CoLo205. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparative Mössbauer study of high Tc superconductors

¹⁵¹Eu,¹¹⁹Sn and⁵⁷Fe Mössbauer spectroscopy was used to study high T_c superconductors. Mössbauer spectra of Sn substituted EuBa₂Cu₃O_7–y, YBa₂Cu₃O_7–y and TlBaCaCuO_4.5+y as well as of Fe Substituted TlBaCaCuO_4.5+y were compared. The Sn and Fe ions replace the regular Cu positions in the YBa₂Cu₃O_7–y and in TlBaCaCuO_4.5+y materials, fespectively, while the localization of tin atoms in both the¹¹⁹Sn doped EuBa₂Cu₃O_7–y and TlBaCaCuO_4.5+y superconductors is different from that of previous cases. Up to our knowledge, this is the first publication on a Mössbauer study of a Tl-containing superconductor.     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.     

Stabilization of the unhybridized Sn2+ stannous ion in the BaClF structure and its characterization by119Sn Mössbauer spectroscopy

In divalent tin halides, when the halogen is small and highly electronegative (F, Cl), the tin valence orbitals are hybridized, the tin(II) non-bonded electron pair is located on one of the hybrid orbitals, and the resulting large electric field gradient gives a large quadrupole splitting. The reaction of barium chloride and tin difluoride in aqueous solutions, for large BaCl₂.2H₂O/SnF₂ ratios (>10) results in the precipitation of a white powdered material, which is identified by X-ray diffraction to be BaCIF. However, Tin-119 Mossbauer spectroscopy shows the material contains a fairly large amount of divalent tin in the Sn²⁺ ionic form, with unhybridized orbitals, like in SnCl₂. Using X-ray diffraction, we have established that Sn²⁺ ions substitute 15% of the Ba²⁺ ions at random, and chemical analysis shows the material has the formula Ba_5.66SnCl_7.30F_6.04 and thus is enriched in chlorine.     

The Valence States of Nickel,Tin, and Sulfur in the Ternary Chalcogenide Ni3Sn2S2—XPS, 61Ni and 119Sn Mössbauer Investigations,and Band Structure Calculations

The hitherto controversial valence states of nickel and tin in the ternary chalcogenide Ni₃Sn₂S₂ (see structure) have been determined by photoelectron and Mössbauer spectroscopy (⁶¹Ni, ¹¹⁹Sn). Results from band structure calculations confirmed that this shandite phase is a metal and that the approximate distribution of the valence electrons is (Ni⁰)₃(Sn(1)^II)(Sn(2)^II)(S^II−)₂.     

Speciation and GC retention indices of some organotin compounds in water

Analytical methods have been developed for the quantitative determination of Bu₄Sn, Bu₃Sn⁺, Bu₂Sn²⁺, BuSn³⁺, Me₃BuSn, Me₂Bu₂Sn, MeBu₃Sn, MeBuSn²⁺, Me₂BuSn⁺ and MeBu₂Sn⁺ in water. Organotin compounds are extracted from water with tropolone at 0.1 % in n-pentane, derivatized with n-pentylmagnesium bromide and determined by gas chromatography with flame photometric detection or flame ionization detection. Absolute detection limits are 0.05-0.12 ng and 1.2-13 ng as tin, respectively. The method was applied to the analysis of spiked tap-water containing 0.3-1000 ng cm^?3 of each of the organotin compounds.     

Studies on the effects of doping cesium metal(III) halides of the type Cs3MIII2X9 (MIII = Sb or Bi, X = Cl or Br)

A series of compounds, Cs₃M^III₂X₉ (M^III = Sb and Bi, X = Cl or Br) are doped with impurity ions (Ba²⁺, Ca²⁺, Sn²⁺, Pb²⁺, Mg²⁺, Fe²⁺, Tl³⁺, In³⁺, Se⁴⁺). Lattices doped with Sn(II), Pb(II) and Se(IV) are colored. Sn-119m Mössbauer data are consistent with the donation of Sn-5s electron density from tin(II) to a conduction band to give a pseudo-tin(IV) electronic environment.     

The Role of 2,6‐Diaminopyridine Ligands in the Isolation of an Unprecedented,Low‐Valent Tin Complex

Stabilization of the central atom in an oxidation state of zero through coordination of neutral ligands is a common bonding motif in transition‐metal chemistry. However, the stabilization of main‐group elements in an oxidation state of zero by neutral ligands is rare. Herein, we report that the transamination reaction of the DAMPY ligand system (DAMPY=2,6‐[ArNH‐CH₂]₂(NC₅H₃) (Ar=C₆H₃‐2,6‐iPr₂)) with Sn[N(SiMe₃)₂]₂ produces the DIMPYSn complex (DIMPY=(2,6‐[ArN?CH]₂(NC₅H₃)) with the Sn atom in a formal oxidation state of zero. This is the first example of a tin compound stabilized in a formal oxidation state of zero by only one donor molecule. Furthermore, three related low‐valent Sn^II complexes, including a [DIMPYSn^IICl]⁺[SnCl₃]^? ion pair, a bisstannylene DAMPY{Sn^II[N(SiMe₃)₂]₂}₂, and the enamine complex MeDIMPYSn^II, were isolated. Experimental results and the conclusions drawn are also supported by theoretical studies at the density functional level of theory and ¹¹⁹Sn Mössbauer spectroscopy.     

Reactions with a Metalloid Tin Cluster {Sn10[Si(SiMe3)3]4}2−: Ligand Elimination versus Coordination Chemistry

Chemistry that uses metalloid tin clusters as a starting material is of fundamental interest towards understanding the reactivity of such compounds. Since we identified {Sn₁₀[Si(SiMe₃)₃]₄}^2? 7 as an ideal candidate for such reactions, we present a further step in the understanding of metalloid tin cluster chemistry. In contrast to germanium chemistry, ligand elimination seems to be a major reaction channel, which leads to the more open metalloid cluster {Sn₁₀[Si(SiMe₃)₃]₃}^? 9 , in which the Sn core is only shielded by three Si(SiMe₃)₃ ligands. Compound 9 is obtained through different routes and is crystallised together with two different countercations. Besides the structural characterisation of this novel metalloid tin cluster, the electronic structure is analysed by ¹¹⁹Sn Mössbauer spectroscopy. Additionally, possible reaction pathways are discussed. The presented first step into the chemistry of metalloid tin clusters thus indicates that, with respect to metalloid germanium clusters, more reaction channels are accessible, thereby leading to a more complex reaction system.