Direct-write fabrication of colloidal photonic crystal microarrays by ink-jet printing

An array of the colloidal photonic crystals was directly fabricated using an ink-jet printing. The colloidal ink droplets containing the monodispersed polystyrene latex particles were selectively deposited on a hydrophobic surface. Solvent evaporation from each ink droplet leads to a formation of microdome-shaped colloidal assembles of close-packed structures. Microspectroscopic analysis has confirmed that the individual assembly serves as a photonic crystal and its optical properties can be correlated with the microstructural features. Unlike other techniques of patterned growth of colloidal photonic crystal, the substrate does not need to be patterned first and no template is needed in the direct writing by the ink-jet printing. Using our strategy, we have rapidly produced the colloidal photonic crystal microarrays composed of different-sized spheres addressably patterned on the same substrate.     

Fabrication of binary colloidal crystals and non-close-packed structures by a sequential self-assembly method

Binary colloidal films of polystyrene (PS) spheres and silica spheres were fabricated with a sequential growth method using differently sized colloidal particles. In particular, we demonstrate the structures formed by a silica monolayer growing on top of a PS monolayer and a silica multilayer growing on top of a PS monolayer. By removal of the bottom PS layers, non-close-packed hexagonal, pentagonal, and square silica arrays were obtained at the original silica/PS interface. The possible formation mechanism of the non-close-packed structure was discussed, which may be used to explain how 3D colloidal crystals grow on patterned substrates.     

微凝胶胶体晶体研究进展

Poly(N-isopropylacrylamide)(PNIPAM)微凝胶粒子是一种软的胶体粒子.和单分散的SiO_2、PS、PMMA等硬的胶体粒子一样,单分散的PNIPAM微凝胶粒子也可以自组装成为高度有序的胶体晶体.微凝胶粒子软物质的特性及其对外部刺激的响应性赋予其不同于硬球的组装行为.微凝胶胶体晶体的高度有序结构及其刺激响应性使其在诸多领域有重要用途.本文分别介绍了三维及二维微凝胶胶体晶体组装的研究进展,并对已开发的基于微凝胶胶体晶体的应用进行了总结.     

Sedimentation–diffusion profiles and layered sedimentation of charged colloids at low ionic strength

We report the formation of strongly inflated sedimentation–diffusion concentration profiles for charged monodisperse colloidal spheres in absolute ethanol. Various additional experiments, such as light scattering, confirm that the very dilute supernatants, left behind by the majority of settling colloids, contain spheres that repel each other at distances of micrometers. We attribute these unusual profiles to a significant counter-ion contribution to the osmotic pressure and to the Debye screening length. An approximate osmotic equation-of-state at the level of the second virial coefficient for dispersions at very low ionic strength indeed implies an algebraic long-distance decay of sedimentation–diffusion profiles, together with significant lowering of the effective colloid mass by an entropic lift due to counter-ions. We have also observed that sedimenting dispersions sometimes demix into two layers, which are both disordered fluids. Since the colloids are clearly repulsive on the DLVO pair level, this layering possibly manifests a phase transition driven by many-body attractions.     

Recent advances in fabrication of monolayer colloidal crystals and their inverse replicas

Monolayer colloidal crystals(MCCs)are two-dimensional(2D)colloidal crystals consisting of a monolayer of monodisperse colloidal particles arrayed with a 2D periodic order.In recent years,MCCs have attracted intensive interest because they can act as 2D photonic crystals and be used as versatile templates for fabrication of various 2D nanostructure arrays.In this review,we provide an overview of the recent progress in the controllable fabrication of MCCs and their inverse replicas.First,some newly-developed methods for the self-assembly of MCCs based on different strategies including interfacial assembly and convective assembly are introduced.Second,some representative novel methods regarding the fabrication of various functional2D inverse replicas of MCCs,such as 2D arrays of nanobowls,nanocaps,and hollow spheres,as well as 2D monolayer inverse opals(MIOs),are described.In addition,the potential applications of MCCs and their inverse replicas are discussed.     

PET/PC共混体系的酯交换反应对其高压结晶行为的影响

利用转矩流变仪、DSC、SEM及WAXD等表征手段研究了PET/PC共混体系的酯交换反应对其高压结晶行为的影响.SEM观察表明,PET和PC熔混时的酯交换反应有利于PET/PC体系在高压结晶时生成厚度较大的伸直链晶体,且可以促进其高压下酯交换反应的发生.楔形伸直链晶体和弯曲伸直链晶体的存在证明链滑移扩散和酯交换反应两种机制对体系中聚酯伸直链晶体的增厚有贡献.拟合分峰法和War-ren-Averbach傅里叶分析法的计算结果表明,随PET/PC体系熔混时酯交换反应程度的增加,高压结晶共混物的结晶度降低,PET的平均微晶尺寸增大,点阵畸变平均值则减小,而微晶尺寸分布变宽.提出了在共聚物组分都具备结晶能力时,结晶诱导化学反应和化学反应诱导结晶两种过程在一定条件下可同时发生的观点.     

胶体颗粒在聚电解质多层膜表面的可控组装

利用原子力显微镜和扫描电子显微镜研究了磺化聚苯乙烯胶体颗粒在由聚二甲基二烯丙基氯化铵和聚苯乙烯磺酸钠层状自组装而成的多层膜表面的组装.该组装受表面性质影响,通过对多层膜的最外层的组装条件或利用盐溶液对多层膜进行后处理可以控制胶体颗粒在膜表面的组装密度.     

Colloidal assembly: the road from particles to colloidal molecules and crystals

Colloidal particles may be considered as building blocks for materials, just like atoms are the bricks of molecules, macromolecules, and crystals. Periodic arrays of colloids (colloidal crystals) have attracted much interest over the last two decades, largely because of their unique photonic properties. The archetype opal structures are based on close-packed arrays of spheres of submicrometer diameter. Interest in structuring materials at this length scale, but with more complex features and ideally by self-assembly processes, has led to much progress in controlling features of both building blocks and assemblies. The necessary ingredients include colloids, colloidal clusters, and colloidal "molecules" which have special shapes and the ability to bind directionally, the control over short-range and long-range interactions, and the capability to place and orientate these bricks. This Review highlights recent experimental and theoretical progress in the assembly of colloids larger than 50 nm.     

Madelung-like attractions in colloidal crystals

The Debye-Hückel (Derjaguin-Landau-Verwey-Overbeek) two-sphere interaction potential is discussed in relation to the dissociative electrical double layer (DEDL) theory. The DEDL theory provides new electrostatic models to investigate the origin of attractions in colloidal crystals. Three Maxwellian models of two, three, and four interacting spheres are suggested. It is estimated that at least four spheres are needed to obtain Madelung-like attractions that are brought about by co-ion exclusion.     

胶体晶体自组装排列进展

自组装排列胶体晶体是发展光子晶体等亚微米周期有序结构及新型光电子器件十分重要的环节.高电荷密度单分散胶体球在较弱的离子强度和稀浓度下会自发排列形成紧密堆积的周期性结构(ccp),常常是面心立方(fcc),科学家们以此为基础发展了多种结晶化胶体粒子的方法,包括重力场沉积、电泳沉积、胶体外延技术、垂直沉积、流通池、物理束缚排列及其他的许多方法.目前排列的胶体粒子基本为球形,材料也多为SiO2、PS、PMMA,此外一些复合粒子,主要为核壳粒子的排列这里也稍作介绍,这些方法及其变通的使用可以形成类蛋白石及反蛋白石结构,最终实现光子带隙及其它多种用途。     

Nanoparticle-mediated epitaxial assembly of colloidal crystals on patterned substrates

We have studied the assembly of 3-D colloidal crystals from binary mixtures of colloidal microspheres and highly charged nanoparticles on flat and epitaxially patterned substrates created by focused ion beam milling. The microspheres were settled onto these substrates from dilute binary mixtures. Laser scanning confocal microscopy was used to directly observe microsphere structural evolution during sedimentation, nanoparticle gelation, and subsequent drying. After microsphere settling, the nanoparticle solution surrounding the colloidal crystal was gelled in situ by introducing ammonia vapor, which increased the pH and enabled drying with minimal microsphere rearrangement. By infilling the dried colloidal crystals with an index-matched fluorescent dye solution, we generated full 3-D reconstructions of their structure including defects as a function of initial suspension composition and pitch of the patterned features. Through proper control over these important parameters, 3-D colloidal crystals were created with low defect densities suitable for use as templates for photonic crystals and photonic band gap materials.     

Layer-by-layer growth of attractive binary colloidal particles

We investigate the two-dimensional (2D) colloidal structures formed by oppositely charged polystyrene monolayers grown layer-by-layer, where the electrostatic forces are recruited to assist in the packing of the layers. Our results show a transition through several 2D-superlattices to more close-packed structures with increasing ionic strength. The observed geometrical packing constraints of the 2D-superlattice structures agree well with the estimated Debye screening length of the electric double layer. By tuning interaction forces between charged colloids, electrostatic interactions could enhance the template-directed self-assembly process to achieve more complex and diverse structures.     

Colloidal crystal microarrays and two-dimensional superstructures: a versatile approach for patterned surface assembly

A simple, fast, and robust approach to colloidal assembly on patterned surfaces was developed. The approach involves the rapid settling and dewetting of suspensions of spherical colloids on lithographically templated surfaces. Using this method, we can quickly and easily fabricate close-packed colloidal crystal microarrays of both silica and polystyrene spheres that range in size from 500 nm to 4.5 microm. The microarrays tend to induce the formation of monolayer colloidal crystals, which can be interconnected and removed from the templates as free-standing colloidal crystal slabs. The same approach can also be used to assemble two-dimensional colloidal crystal superlattices that can adopt a variety of structures. Graphite, kagome, body-centered cubic, open hexagonal, tetragonal, and linear chain structures can all be quickly accessed by adjusting the ratio of the sphere diameter to the template diameter.     

Shape‐Tunable Colloids from Structured Liquid Droplet Templates

Shaping colloidal building units is of paramount importance for their self‐assembly into complex objects. Continuous tuning of colloidal shapes is highly desired for understanding self‐assembly, but it still remains a challenge. Herein, we report a new template strategy for the shape‐tunable synthesis of anisotropic colloids with shapes that can be continuously tuned from discs (oblate spheroids) to spheres to theta shapes to dumbbells. This was realized by creating structured shape‐tunable droplets from patchy colloidal discs and using these droplets as templates. In particular, we found that a controlled dumbbell‐to‐eyeball droplet transformation can be used for the synthesis of eyeball‐shaped colloids. We also demonstrated the droplet transformation pathways and applied the method to the synthesis of colloidal molecules. These colloids provide possibilities for exploring their ordered packing structures, and the method based on the use of structured droplets can be adapted for the synthesis of other functional colloidal particles.     

Deposition of oriented zeolite A films: in situ and secondary growth

Zeolite A suspensions with a monomodal, narrow particle size distribution have been prepared. The suspended particles in a TMAOH water solution at pH 9 are negatively charged with a zeta potential of −43 mV. Modification of the external surface of the zeolite particles by a silylation reaction produces particles that, when they are suspended in water, are positively charged and have a zeta potential of +40 mV.The suspensions of the negatively or positively charged particles can be used for the preparation of adsorbed layers of particles on oppositely charged substrates by electrostatic attraction. This deposition process leads to a high coverage of the substrate with well-adhered particles. The cubic morphology of the zeolite particles results in preferential orientation after deposition. The particles are oriented with their {h 0 0} planes (cube faces) parallel and perpendicular to the substrate (out-of-plane orientation). The particles are randomly oriented with respect to the direction perpendicular to the substrate (in-plane orientation). Although, under optimized conditions, the coverage is high and only one adsorption cycle is necessary, the particles are not closely packed.Alternately, the zeolite particle suspensions can be used to deposit close-packed arrays of particles by convective particle transport during dip coating on substrates bearing the same charge as the zeolite particles. Using monodispersed zeolite A suspensions and slow speed dip coating close-packed hexagonal colloidal crystals were prepared. The type of colloidal crystal deposits formed range from continuous sublayers, monolayers, or multilayers to isolated discoidal clusters consisting of few zeolite particles. Factors affecting the deposited layer(s) structure are particle concentration of the suspension and withdrawal speed. In addition to close packing, the layers prepared by dip coating exhibit preferred orientation with the particle faces lying parallel and perpendicular to the substrate surface. Moreover, this second route of precursor film formation by colloidal crystallization leads to domains of well-aligned zeolite particles in three dimensions, i.e. with their faces parallel to each other. The oriented domains span the length of several particles; however, low angle boundaries and other defects during colloidal crystallization prevent the formation of macroscopically three-dimensionally ordered zeolite particles.The precursor layers were subjected to secondary growth in order to prepare continuous intergrown films. Secondary growth proceeds initially by local epitaxy on the deposited particles. Later in the process, deposition proceeds by incorporation of particles from solution along with re-nucleation on the growing film. The intergrown films have predominately [h 0 0] out-of-plane orientation; however, after extended secondary growth treatment a population of [h h h] grains appears on the surface of the regrown films.     

Polyelectrolyte multilayers as a platform for luminescent nanocrystal patterned assemblies

The fabrication of uniform and patterned nanocrystal (NC) assemblies has been investigated by exploiting the possibility of carefully tailoring colloidal NC surface chemistry and the ability of polyelectrolyte (PE) to functionalize substrates through an electrostatic layer-by-layer (LbL) strategy. Appropriate deposition conditions, substrate functionalization, and post-preparative treatments were selected to tailor the substrate surface chemistry to effectively direct the homogeneous electrostatic-induced assembly of NCs. Water-dispersible luminescent NCs, namely, (CdSe)ZnS and CdS, were differently functionalized by (1) ligand-exchange reaction, (2) growth of a hydrophilic silica shell, and (3) formation of a hydrophilic inclusion complex, thus providing functional NCs stable in a defined pH range. The electrostatically charged functional NCs represent a comprehensive selection of examples of surface-functionalized NCs, which enables the systematic investigation of experimental parameters in NC assembly processes carried out by combining LbL procedures with microcontact printing and also exploiting NC emission, relevant for potential applications, as a prompt and effective probe for evaluating assembly quality. Thus, an ample showcase of combinations has been investigated, and the spectroscopic and morphological features of the resulting NC-based structures have been discussed.     

Mechanomorphological Guidance of Colloidal Gel Regulates Cell Morphogenesis

Microstructural morphology of the extracellular matrix guides the organization of cells in 3D. However, current biomaterials-based matrices cannot provide distinct spatial cues through their microstructural morphology due to design constraints. To address this, colloidal gels are developed as 3D matrices with distinct microstructure by aggregating ionic polyurethane colloids via electrostatic screening. Due to the defined orientation of interconnected particles, positively charged colloids form extended strands resulting in a dense microstructure whereas negatively charged colloids form compact aggregates with localized large voids. Chondrogenesis of human mesenchymal stem cells (MSCs) and endothelial morphogenesis of human endothelial cells (ECs) are examined in these colloidal gels. MSCs show enhanced chondrogenic response in dense colloidal gel due to their spatial organization achieved by balancing the cell–cell and cell–matrix interactions compared to porous gels where cells are mainly clustered. ECs tend to form relatively elongated cellular networks in dense colloidal gel compared to porous gels. Additionally, the role of matrix stiffness and viscoelasticity in the morphogenesis of MSCs and ECs are analyzed with respect to microstructural morphology. Overall, these results demonstrate that colloidal gels can provide spatial cues through their microstructural morphology and in correlation with matrix mechanics for cell morphogenesis.     

DNA and DNAzyme-mediated 2D colloidal assembly

DNA-mediated interactions present a significant opportunity for controlling colloidal self-assembly. Using microcontact printing to achieve spatial control of DNA-surface patterning and DNA-functionalized polystyrene colloids, we report that DNA hybridization can be utilized for sequence-specific reversible self-assembly of well-ordered 2D colloidal arrays. Two essential indicators of DNA-hybridization mediated assembly were confirmed: thermal reversibility and sequence specificity. The arrays melted at 50 degrees C and reassembled when introduced to fresh colloid suspension, and sequence specificity with <1% nonspecific binding was confirmed using fluorescent polystyrene colloids. The real-time assembly of the colloids onto the periodically patterned substrate was monitored by simple laser diffraction to obtain assembly kinetics. Maximum surface coverage of DNA-mediated assembly was determined to be 0.593 for DNA-functionalized 100 nm polystyrene colloids, and 90% of the assembly was complete after 6.25 h of hybridization in 50 mM NaCl Tris buffer. We also demonstrate that DNAzymes, catalytic DNA molecules, can be incorporated into the design, and in the presence of 10 microM Pb(2+), the hybridization-induced array assembly can be disrupted via DNAzyme activity.