Instability of Buckley-Leverett flow in a heterogeneous medium

We study the simultaneous one-dimensional flow of water and oil in a heterogeneous medium modelled by the Buckley-Leverett equation. It is shown both by analytical solutions and by numerical experiments that this hyperbolic model is unstable in the following sense: Perturbations in physical parameters in a tiny region of the reservoir may lead to a totally different picture of the flow. This means that simulation results obtained by solving the hyperbolic Buckley-Leverett equation may be unreliable.Symbols and Notation f fractional flow function varying withs andx - value off outsideI - value off insideI - local approximation off around¯x - f ^–,f ⁺ values of - f _j ⁿ value off atS _j ⁿ andx _j - g acceleration due to gravity [ms^–2] - I interval containing a low permeable rock - k dimensionless absolute permeability - k ^* absolute permeability [m²] - k _c ^* characteristic absolute permeability [m²] - k _ro relative oil permeability - k _rw relative water permeability - L ^* characteristic length [m] - L ₁ the space of absolutely integrable functions - L the space of bounded functions - P _c dimensionless capillary pressure function - P _c ^* capillary pressure function [Pa] - P _c ^* characteristic pressure [Pa] - S similarity solution - S _j ⁿ numerical approximation tos(x_j, t_n) - S ₁, S₂,S ₃ constant values ofs - s water saturation - value ofs at - s ^L left state ofs (wrt. ) - s ^R right state ofs (wrt. ) - s s for a fixed value of in Section 3 - T value oft - t dimensionless time coordinate - t ^* time coordinate [s] - t _c ^* characteristic time [s] - t _n temporal grid point,t _n=n t - v ^* total filtration (Darcy) velocity [ms^–1] - W, , v dimensionless numbers defined by Equations (4), (5) and (6) - x dimensionless spatial coordinate [m] - x ^* spatial coordinate [m] - x _j spatial grid piont,x _j=j x - discontinuity curve in (x, t) space - right limiting value of¯x - left limiting value of¯x - angle between flow direction and horizontal direction - t temporal grid spacing - x spatial grid spacing - length ofI - parameter measuring the capillary effects - argument ofS - _o dimensionless dynamic oil viscosity - _w dimensionless dynamic water viscosity - _c ^* characteristic viscosity [kg m^–1s^–1] - _o ^* dynamic oil viscosity [kg m^–1s^–1] - _w ^* dynamic water viscosity [k gm^–1s^–1] - _o dimensionless density of oil - _w dimensionless density of water - _c ^* characteristic density [kgm^–3] - _o ^* density of oil [kgm^–3] - _w ^* density of water [kgm^–3] - porosity - dimensionless diffusion function varying withs andx - ^* dimensionless function varying with s andx ^* [kg^–1m³s] - _j ⁿ value of atS _j ⁿ andx _j This research has been supported by VISTA, a research cooperation between the Norwegian Academy of Science and Letters and Den norske stats oljeselskap a.s. (Statoil).     

The contribution of internal degrees of freedom to the non-Newtonian rheology of model polymer fluids

We report non-equilibrium molecular dynamics simulations of rigid and non-rigid dumbbell fluids to determine the contribution of internal degrees of freedom to strain-rate-dependent shear viscosity. The model adopted for non-rigid molecules is a modification of the finitely extensible nonlinear elastic (FENE) dumbbell commonly used in kinetic theories of polymer solutions. We consider model polymer melts — that is, fluids composed of rigid dumbbells and of FENE dumbbells. We report the steady-state stress tensor and the transient stress response to an applied Couerte strain field for several strain rates. We find that the rheological properties of the rigid and FENE dumbbells are qualitatively and quantitatively similar. (The only exception to this is the zero strain rate shear viscosity.) Except at high strain rates, the average conformation of the FENE dumbbells in a Couette strain field is found to be very similar to that of FENE dumbbells in the absence of strain. The theological properties of the two dumbbell fluids are compared to those of a corresponding fluid of spheres which is shown to be the most non-Newtonian of the three fluids considered.Symbol Definition b dimensionless time constant relating vibration to other forms of motion - F force on center of mass of dumbbell - F _i force on bead i of dumbbell - F force between center of masses of dumbbells and - F _ij force between beads i and j - h vector connecting bead to center of mass of dumbbell - H dimensionless spring constant for dumbbells, in units of / ² - I moment of inertia of dumbbell - J general current induced by applied field - k _B Boltzmann's constant - L angular momentum - m mass of bead, (= m/2) - M mass of dumbbell, g - N number of dumbbells in simulation cell - P translational momentum of center of mass of dumbbell - P pressure tensor - P _xy xy component of pressure tensor - Q separation of beads in dumbbell - Q _eq equilibrium extension of FENE dumbbell and fixed extension of rigid dumbbell - Q ₀ maximum extension of dumbbell - r _ij vector connecting beads i and j - r position vector of center of mass dumbbell - R vector connecting centers of mass of two dumbbells - t time - t ^* dimensionless time, in units of m/ - T ^* dimensionless temperature, in units of /k - u potential energy - u velocity vector of flow field - u _x x component of velocity vector - V volume of simulation cell - X general applied field - strain rate, s^–1 - ^* dimensionless shear rate, in units of /m ² - general transport property - Lennard-Jones potential well depth - friction factor for Gaussian thermostat - shear viscosity, g/cms - ^* dimensionless shear viscosity, in units of m/ ² - ^* dimensionless number density, in units of ^–3 - Lennard-Jones separation of minimum energy - relaxation time of a fluid - angular velocity of dumbbell - orientation angle of dumbbell      

The finite element solutions of laminar flow and combined convection of air in a staggered or an in-line tube-bank

A finite element method is used to solve the full Navier-Stokes and energy equations for the problems of laminar combined convection from three isothermal heat horizontal cylinders in staggered tube-bank and four isothermal heat horizontal cylinders in in-line tube-bank. The variations of surface shear stress, pressure and Nusselt number are obtained over the entire cylinder surface including the zone beyond the separation point. The predicted values of total, pressure and friction drag coefficients, average Nusselt number and the plots of velocity flow fields and isotherms are also presented.

---

Die Finite-Elemente-Lösung von laminarer Strömung und kombinierter Konvektion von Luft in einer versetzten oder fluchtenden Rohranordnung

Zusammenfassung Eine Methode der finiten Elemente wird zur Lösung der vollständigen Navier-Stokes- und der Energiegleichung für die Probleme der laminaren kombinierten Konvektion an drei isothermen geheizten horizontalen Zylindern in versetzter Rohranordnung sowie für vier isotherme geheizte horizontale Zylinder in fluchtender Anordnung verwendet.Die Veränderung der Wandschubspannung, des Druckes und der Nusselt-Zahl werden für die gesamte Zylinderoberfläche, einschließlich des Bereiches nach dem Ablösepunkt, bestimmt. Die Werte des gesamten Widerstandsbeiwertes aufgrund von Druck und Reibung, die durchschnittliche Nusselt-Zahl und die Diagramme des Geschwindigkeitsfeldes und der Isothermen werden ebenfalls aufgezeigt.

---

Nomenclature C specifie heat - C _D total drag coefficient - C _f friction drag coefficient - C _p pressure drag coefficient - D diameter of cylinder,L=2R ₀ - G, g gravitational acceleration - Gr Grashof number, g(T_w–T )D ³/v ² - h local heat transfer coefficient - K thermal conductivity - L spacing between the centers of cylinder - M _l shape function - N _i shape function - Nu, local and average Nusselt numbers - P dimensionless pressure, p^*/u ² - p ^*,p pressure, free stream pressure - Pe Peclet number,RePr - Pr Prandtl number, c/K - Ra Rayleigh number,Gr Pr - Re Reynolds number,Du /v - R ₀ radius of cylinder - T temperature - T _w temperature on cylinder surface with fixed value - T free stream temperature - v dimensionless x-direction component of velocity,v ^*/u - u ^* x-direction component of velocity - u free stream velocity - v dimensionless Y-direction component of velocity,v ^*/u - v ^* Y-direction component of velocity - X x-direction axis - x dimensionless x-direction coordinate,x ^*/D - x^* x-direction coordinate - Y Y-direction axis - y dimensionless Y-direction coordinate,y ^*/D - y ^* Y-direction coordinate Greek symbols coefficient of volumetric thermal expansion - plane angle - dynamic viscosity - kinematic viscosity, / - density of fluid - _w dimensionless surface shear stress, _* ^w /u ² - skw/* surface shear stress - dimensionless temperature,      

Laminar source flow between parallel porous disks with equal suction and injection

An analysis is presented for laminar source flow between parallel stationary porous disks with suction at one of the disks and equal injection at the other. The solution is in the form of an infinite series expansion about the solution at infinite radius, and is valid for all suction and injection rates. Expressions for the velocity, pressure, and shear stress are presented and the effect of the cross flow is discussed.Nomenclature a distance between disks - A, B, ..., J functions of R _w only - F static pressure - p dimensionless static pressure, p(a ²/ ²) - Q volumetric flow rate of the source - r radial coordinate - r dimensionless radial coordinate, r/a - R radial coordinate of a point in the flow region - R dimensionless radial coordinate of a point in the flow region, R - Re source Reynolds number, Q/2a - R _w wall Reynolds number, Va/ - reduced Reynolds number, Re/r ² - critical Reynolds number - velocity component in radial direction - u dimensionless velocity component in radial direction, a/ - average radial velocity, Q/2a - u dimensionless average radial velocity, Re/r - ratio of radial velocity to average radial velocity, u/u - velocity component in axial direction - v dimensionless velocity component in axial direction, v - V magnitude of suction or injection velocity - z axial coordinate - z dimensionless axial coordinate, z a - viscosity - density - kinematic viscosity, / - shear stress at lower disk - shear stress at upper disk - ₀ dimensionless shear stress at lower disk, - ₁ dimensionless shear stress at upper disk, - dimensionless stream function     

On the closure problem for Darcy's law

In a previous derivation of Darcy's law, the closure problem was presented in terms of an integro-differential equation for a second-order tensor. In this paper, we show that the closure problem can be transformed to a set of Stokes-like equations and we compare solutions of these equations with experimental data. The computational advantages of the transformed closure problem are considerable.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the averaging volume, m² - B second-order tensor used to respresent the velocity deviation - b vector used to represent the pressure deviation, m^–1 - C second-order tensor related to the permeability tensor, m^–2 - D second-order tensor used to represent the velocity deviation, m² - d vector used to represent the pressure deviation, m - g gravity vector, m/s² - I unit tensor - K C ^–1,–D, Darcy's law permeability tensor, m² - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - l _i i=1, 2, 3, lattice vectors, m - n unit normal vector pointing from the-phase toward the-phase - n _e outwardly directed unit normal vector at the entrances and exits of the-phase - p pressure in the-phase, N/m ² - p intrinsic phase average pressure, N/m² - p –p , spatial deviation of the pressure in the-phase, N/m² - r position vector locating points in the-phase, m - r ₀ radius of the averaging volume, m - t time, s - v velocity vector in the-phase, m/s - v intrinsic phase average velocity in the-phase, m/s - v phase average or Darcy velocity in the \-phase, m/s - v –v , spatial deviation of the velocity in the-phase m/s - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ Greek Letters V /V volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m²     

Free convection from a vertical plate with concentrated and distributed thermal sources

An analysis is developed for the laminar free convection from a vertical plate with uniformly distributed wall heat flux and a concentrated line thermal source embedded at the leading edge. We introduce a parameter=(1 +Q _L/Q_w)^–1=(1 + Ra_L/Ra_w)^–1 to describe the relative strength of the two thermal sources; and propose a unified buoyancy parameter=( Ra_L+ Ra_w)^1/5 with=1/(1 +Pr ^–1) to properly scale the dependent and independent variables. The variables are so defined that the resulting nonsimilar boundary-layer equations can describe exactly the buoyancy-induced flow from the dual sources with any relative strength to fluids of any Prandtl number from very small values to infinity. These nonsimilar equations are readily reducible to the self-similar equations of an adiabatic wall plume for=0, and to those of free convection from uniform flux plate for=1. Rigorous finite-difference solutions for fluids of Pr from 0.001 to are obtained over the entire range of from 0 to 1. The effects of both relative source strength and Prandtl number on the velocity profiles, temperature profiles, and the variations of wall temperature, are clearly illustrated.

---

Freie Konvektion an einer vertikalen Platte mit einer konzentrierten und einer gleichmäßig verteilten Wärmequelle

Zusammenfassung Für die freie Konvektion an einer vertikalen Platte mit einer gleichmäßig verteilten Wandwärmestromdichte und einer in der Vorderkante eingebetteten linienförmigen Wärmequelle wird eine Berechnungsmethode entwickelt. Zur Beschreibung der relativen Stärke der beiden Wärmequellen führen wir einen Parameter=(1 + Q_L/Q_w)^–1=(1 + Ra_L/Ra_w)^–1 ein und schlagen einen vereinheitlichten Auftriebsparameter=( Ra _L+ Ra _w)^1/5 mit=1/(1 +Pr ^–1 für die Skalierung der abhängigen und unabhängigen Variablen vor. Die Variablen werden so definiert, daß mit den sich ergebenden unabhängigen Grenzschichtgleichungen die von den beiden Wärmequellen beliebiger Stärke verursachte Auftriebsströmung von Fluiden beliebiger Prandtl-Zahl genau beschrieben werden kann. Diese unabhängigen Gleichungen können ohne weiteres auf die selbstähnlichen Gleichungen für den Fall einer lokalen Wärmezufuhr an einer sonst adiabatischen Wand für=0 und jenen der freien konvektion an einer Platte mit einheitlichem Wärmestrom für=1 zurückgeführt werden. Für Fluide mit der Prandtl-Zahl zwischen 0,001 und Unendlich werden nach der strengen finite Differenzen-Methode Lösungen im Bereich von zwischen 0 und 1 erhalten. Der jeweilige Einfluß der relativen Quellenstärke und der Prandtl-Zahl auf die Geschwindigkeits- und Temperaturprofile sowie die Veränderung der Wandtemperatur werden deutlich dargestellt.

---

Nomenclature C _f friction coefficient - C _p specific heat - f reduced stream function - g gravitational acceleration - k thermal conductivity - L width of the plate - Nu local Nusselt number - Pr Prandtl number - q _w wall heat flux - Q _L heat generated by the line source - Q _w heat released by the uniform-flux wall from 0 tox, q _w Lx - Ra _L local Rayleigh number, g T _L ^* x ³/( ) - Ra _w local Rayleigh number,g T _w ^* w ³/( ) - T fluid temperature - T temperature of ambient fluid - T _L ^* characteristic temperature of the line source,Q _{L/(C p} L) - T _w ^* characteristic temperature of the uniform flux wall, =q _w x/k=Q _w /(C _p L) - u velocity component in then-direction - U₀ dimensionless velocity,u/(/x) Ra _L ^2/5 - U ₁ dimensionless velocity,u/(/x) Ra _w ^2/5 - velocity component in they-direction - x coordinate parallel to the plate - y coordinate normal to the plate - thermal diffusivity - thermal expansion coefficient - pseudo-similarity variable,(y/x) - dimensionless temperature, (T–T )/(T _L ^* +T _w ^* ) - ₀ dimensionless temperature, (Ra_l)^1/5 (T–T )/T _L ^* - ₁ dimensionless temperature, (Ra_w)Ra_w)^1/5 (T–T )/T _w ^* - (Ra _L+Ra_w)^1/5 - kinematic viscosity - (1 +Ra _L/Ra_w)^–1=(1 +T _L ^* /T _w ^* )^–1=(1 + Q_L/Q_w)^–1 - density - Pr/(1 +Pr) - _w wall shear stress - stream function     

Diffusion in anisotropic porous media

An experimental system was constructed in order to measure the two distinct components of the effective diffusivity tensor in transversely isotropic, unconsolidated porous media. Measurements were made for porous media consisting of glass spheres, mica particles, and disks made from mylar sheets. Both the particle geometry and the void fraction of the porous media were determined experimentally, and theoretical calculations for the two components of the effective diffusivity tensor were carried out. The comparison between theory and experiment clearly indicates that the void fraction and particle geometry are insufficient to characterize the process of diffusion in anisotropic porous media. Roman Letters A interfacial area between - and -phases for the macroscopic system, m² - A _e area of entrances and exits of the -phase for the macroscopic system, m² - A interfacial area contained within the averaging volume, m² - a characteristic length of a particle, m - b average thickness of a particle, m - c _A concentration of species A, moles/m³ - c _o reference concentration of species A, moles/m³ - c _A intrinsic phase average concentration of species A, moles/m³ - c _a c _A–c _A, spatial deviation concentration of species A, moles/m³ - C c _A/c ₀, dimensionless concentration of species A - binary molecular diffusion coefficient, m²/s - D _eff effective diffusivity tensor, m²/s - D _xx component of the effective diffusivity tensor associated with diffusion parallel to the bedding plane, m²/s - D _yy component of the effective diffusivity tensor associated with diffusion perpendicular to the bedding plane, m²/s - D _eff effective diffusivity for isotropic systems, m₂/s - f vector field that maps c _A on to c _a , m - h depth of the mixing chamber, m     

Flow through a helically coiled annulus

In this paper the flow is studied of an incompressible viscous fluid through a helically coiled annulus, the torsion of its centre line taken into account. It has been shown that the torsion affects the secondary flow and contributes to the azimuthal component of velocity around the centre line. The symmetry of the secondary flow streamlines in the absence of torsion, is destroyed in its presence. Some stream lines penetrate from the upper half to the lower half, and if is further increased, a complete circulation around the centre line is obtained at low values of for all Reynolds numbers for which the analysis of this paper is valid, being the ratio of the torsion of the centre line to its curvature.Nomenclature A =constant - a outer radius of the annulus - b unit binormal vector to C - C helical centre line of the pipe - D rL - g 1000 - K Dean number=Re² - L 1+r sin - M (L ²+ ² r ²)^1/2 - n unit normal vector to C - P, P pressure and nondimensional pressure - p ₀, p pressures of O(1) and O() - Re Reynolds number=aW ₀/ - (r, , s), (r, , s) coordinates and nondimensional coordinates - nonorthogonal unit vectors along the coordinate directions - r ₀ radius of the projection of C - t unit tangent vector to C - V _r, V , V _s velocity components along the nonorthogonal directions - V_r, V, V _s nondimensional velocity components along - W ₀ average velocity in a straight annulus Greek symbols , curvature and nondimensional curvature of C - U, V, W lowest order terms for small in the velocity components along the orthogonal directions t - _r, , _s first approximations to V _r , V, V _s for small - =/=/ - kinematic viscosity - density of the fluid - , torsion and nondimensional torsion of C - , stream function and nondimensional stream function - nondimensional streamfunction for U, V - a inner radius of the annulus After this paper was accepted for publication, a paper entitled On the low-Reynolds number flow in a helical pipe, by C.Y. Wang, has appeared in J. Fluid. Mech., Vol 108, 1981, pp. 185–194. The results in Wangs paper are particular cases of this paper for =0, and are also contained in [9].     

Flow of a simple non-newtonian fluid past a sphere

Summary Creeping flow past a sphere is solved for a limiting case of fluid behaviour: an abrupt change in viscosity.List of Symbols d _ij Component of rate-of-deformation tensor - F _d Drag force exerted on sphere by fluid - G ^(d) Coefficients in expression for _ij in terms of d _ij - G _YOJK ^(d) Coefficients in power series representing G ^(d) - R Radius of sphere - r Spherical coordinate - V Velocity of fluid very far from sphere - v _i Component of the velocity vector - x Dimensionless radial distance, r/R - x _i Rectangular Cartesian coordinate - Dimensionless quantity defined by (26) - ^(d) Potential defined by (7) - Value of x denoting border between Regions 1 and 2 as a function of - ₁, ₂ Lower and upper limiting viscosities defined by (10) - Spherical coordinate - * Value of for which =1 - Value of denoting border between regions 1 and 2 as a function of x - Newtonian viscosity - _ij Component of the stress tensor - Spherical coordinate - ₁, ₂ Stream functions defined by (12) and (14) - Second and third invariants of the stress tensor and of the rate-of-deformation tensor, defined by (3)     

Unsteady convective diffusion in a rotating parallel plate channel

The paper presents an exact analysis of the dispersion of a passive contaminant in a viscous fluid flowing in a parallel plate channel driven by a uniform pressure gradient. The channel rotates about an axis perpendicular to its walls with a uniform angular velocity resulting in a secondary flow. Using a generalized dispersion model which is valid for all time, we evaluate the longitudinal dispersion coefficientsK _i (i=1, 2, ...) as functions of time. It is shown thatK ₁=0 andK ₃,K ₄, ... decay rapidly in comparison withK ₂. ButK ₂ decreases with increasing (the dimensionless rotation parameter) for values of upto approximately =2.2. ThereafterK ₂ increases with further increase in and its value gets saturated for large values of (say, 500) and does not change any further with increase in . A physical explanation of this anomalous behaviour ofK ₂ is given.

---

Instationäre konvektive Diffusion in einem rotierenden Parallelplattenkanal

Zusammenfassung In dieser Untersuchung wird eine exakte Analyse der Ausbreitung eines passiven Kontaminierungsstoffes in einer zähen Flüssigkeit gegeben, die, befördert durch einen gleichförmigen Druckgradienten, in einem Parallelplattenkanal strömt. Der Kanal rotiert mit gleichförmiger Winkelgeschwindigkeit um eine zu seinen Wänden senkrechte Achse, wodurch sich eine Sekundärströmung ausbildet. Unter Verwendung eines generalisierten, für alle Zeiten gültigen Dispersionsmodells werden die longitudinalen DispersionskoeffizientenK _i (i=1, 2, ...) als Funktionen der Zeit ermittelt. Es wird gezeigt, daßK ₁=0 gilt und dieK ₃,K ₄, ... gegenüberK ₂ schnell abnehmen.K ₂ nimmt ab, wenn , der dimensionslose Rotationsparameter, bis etwa zum Wert 2,2 ansteigt. Danach wächstK ₂ mit bis auf einem Endwert an, der etwa ab =500 erreicht wird. Dieses anomale Verhalten vonK ₂ findet eine physikalische Erklärung.

---

List of symbols C solute concentration - D molecular diffusivity - K _i longitudinal dispersion coefficients - 2L depth of the channel - P ₀ dimensionless pressure gradient along main flow - Pe Péclet number - q velocity vector - Q _x,Q _y mass flux along the main flow and the secondary flow directions - dimensionless average velocity along the main flow direction - (x, y, z) Cartesian co-ordinates Greek symbols dimensionless rotation parameter - the inclination of side walls withx-axis - kinematic viscosity - fluid density - dimensionless time - angular velocity of the channel - dimensionless distance along the main flow direction - dimensionless distance along the vertical direction - dimensionless solute concentration - integral of the dispersion coefficientK ₂() over a time interval     

Measurements of slip at the wall during flow of high-density polyethylene through a rectangular conduit

A hot-film probe has been used to measure slip of high-density polyethylene flowing through a conduit with a rectangular cross section. A transition from no slip to a stick-slip condition has been observed and associated with irregular extrudate shape. Appreciable extrudate roughness was initiated at the same flow rate as that at which the relationship between Nusselt number and Péclet number for heat transfer from the probe departed from the behavior expected for a no-slip condition at the conduit wall. A ₁ constant defined by eq. (A3) - C dimensionless group used in eq. (7) - C _p heat capacity - D constant in eq. (13) - f u _s/u - f _lin defined by eq. (A6) - G storage modulus - G loss modulus - k thermal conductivity - L length of hot film in thex-direction - L _eff effective length of large probe found from eq. (A3) - Nu _L Nusselt number, defined for a lengthL by eq. (2) - (Nu _L)₀ value ofNu _L atPe = 0 (eq. (A 1)) - Pe Péclet number,uL/ - Pe ₀ Péclet number in slip flow, eq. (6) - Pe ₁ Péclet number in shear flow, eq. (4) - q _L average heat flux over hot film of lengthL - R _i resistances defined by figure 8 - R _AB correlation coefficient defined by eq. (14) for signalsA andB - T temperature - T _s temperature of probe surface - T ambient temperature - T T _s –T - u average velocity - u _s slip velocity - V _b voltage indicated in figure 8 - W probe dimension (figure 6) - x distance in flow direction (figure 1) - y distance perpendicular to flow direction (figure 1) - thermal diffusivity,k/C _p - wall shear rate - _5% thickness of lubricating layer during probe calibration for introduction of an error no greater than 5%; see Appendix I - ^* complex viscosity - density - time - _c critical shear stress, eq. (13) - _w wall shear stress - frequency characterizing extrudate distortion (figures 12 and 13), or frequency of oscillation during rheometric characterization (figures 18–20) - * quantity obtained from normalized Nusselt number, eq. (A1), or complex viscosity ^* - A actual (small) probe (see Appendix I) - M model (large) probe (see Appendix I)     

Control of low-speed turbulent separated flow using jet vortex generators

A parametric study has been performed with jet vortex generators to determine their effectiveness in controlling flow separation associated with low-speed turbulent flow over a two-dimensional rearward-facing ramp. Results indicate that flow-separation control can be accomplished, with the level of control achieved being a function of jet speed, jet orientation (with respect to the free-stream direction), and jet location (distance from the separation region in the free-stream direction). Compared to slot blowing, jet vortex generators can provide an equivalent level of flow control over a larger spanwise region (for constant jet flow area and speed).Nomenclature C _p pressure coefficient, 2(P-P_)/V ² - C _Q total flow coefficient, Q/ v - D ₀ jet orifice diameter - Q total volumetric flow rate - R Reynolds number based on momentum thickness - u fluctuating velocity component in the free-stream (x) direction - V free-stream flow speed - VR ratio of jet speed to free-stream flow speed - x coordinate along the wall in the free-stream direction - jet inclination angle (angle between the jet axis and the wall) - jet azimuthal angle (angle between the jet axis and the free-stream direction in a horizontal plane) - boundary-layer thickness - momentum thickness - lateral distance between jet orifices A version of this paper was presented at the 12th Symposium on Turbulence, University of Missouri-Rolla, 24–26 Sept. 1990     

The hole pressure problem: On the Higashitani-Pritchard theory for transverse and axial slots

Analysis of the Higashitani-Pritchard (HP) theory for a transverse slot provides insight into the nature of the errors involved. The effects of geometry, elasticity and asymmetry on the errors in the HP theory are also discussed. Inertial effects and the effect of asymmetry are included in the HP theory for a transverse slot, through modification of the pressure term in the momentum equation; the extended HP theory proposed in this work provides evidence as to the reasons for the failure of the Newtonian hole pressure as a correction term at higher Reynolds numbers. Finally, the HP theory is used to analyse a control volume of fluid in the axial slot geometry and deduce a rigorous sufficient condition for secondary flows to exist. This analysis illustrates the nature of the role played by the second normal-stress difference (N ₂) in causing secondary flows, and suggests the possibility of the direction of the secondary flows being related to the sign ofN ₂. A computational study of all three aspects of the HP theory investigated in this work seems worth-while. x, y, z Cartesian coordinates - u, Cartesian velocity components inx andy directions - velocity vector - q ₁,q ₂,q ₃ orthogonal curvilinear coordinates - h ₁,h ₂,h ₃ scale factors of curvilinear coordinate system - P isotropic pressure - N ₁ first normal-stress difference - N ₂ second normal-stress difference - R _e Reynolds number - R _L hole-based Reynolds number (eqs. (5.3) and (5.4)) - W _e Weissenberg number - H channel height - W hole width - L hole depth - S path of zero slope of streamlines (pathS) - P _H hole pressure (eq. (2.1)) - P _I,P _E inertial and elastic pressures (eqs. (5.7–9)) - P _R pressure term used in correction for asymmetry (eqs. (5.19–21)) - P _IH,P _EH inertial and elastic hole pressures (eqs. (5.17) and (5.12)) - P _RH,P _SH,P _TH correction terms used in extended HP theory (eqs. (5.23–25)) - total stress tensor - extra-stress tensor - del operator - unit tensor - _ij, _ij components of total and extra stress tensors in curvilinear coordinate system - _w wall shear stress at pointB of figure 1 - unperturbed wall shear rate - density of fluid - viscosity of fluid - ₂ second normal-stress coefficient - _ij radius of curvature of surface of constantq _i in theq _j direction     

Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.     

Flow in porous media III: Deformable media

Stokes flow in a deformable medium is considered in terms of an isotropic, linearly elastic solid matrix. The analysis is restricted to steady forms of the momentum equations and small deformation of the solid phase. Darcy's law can be used to determine the motion of the fluid phase; however, the determination of the Darcy's law permeability tensor represents part of the closure problem in which the position of the fluid-solid interface must be determined.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - E Young's modulus for the-phase, N/m² - e i unit base vectors (i = 1, 2, 3) - g gravity vector, m²/s - H height of elastic, porous bed, m - k unit base vector (=e ₃) - characteristic length scale for the-phase, m - L characteristic length scale for volume-averaged quantities, m - n unit normal vector pointing from the-phase toward the-phase (n = -n ) - p pressure in the-phase, N/m² - P p – g·r, N/m² - r ₀ radius of the averaging volume, m - r position vector, m - t time, s - T total stress tensor in the-phase, N/m² - T ⁰ hydrostatic stress tensor for the-phase, N/m² - u displacement vector for the-phase, m - V averaging volume, m₃ - V volume of the-phase contained within the averaging volume, m³ - v velocity vector for the-phase, m/s Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - shear coefficient of viscosity for the-phase, Nt/m² - first Lamé coefficient for the-phase, N/m² - second Lamé coefficient for the-phase, N/m² - bulk coefficient of viscosity for the-phase, Nt/m² - T –T ⁰ , a deviatoric stress tensor for the-phase, N/m²     

Transient laminar free convection in horizontal cylinders

A numerical study of laminar natural convection inside uniformly heated, partially or fully filled horizontal cylinders is made. A coordinate transformation which simplifies the discretization of the equations of motion and energy is utilized. The resulting system of partial differential equations with their boundary conditions is solved using central differences for various Prandtl and Grashof numbers for two different grid sizes. The flow in completely filled cylinders for which experimental data are available is predicted. Close agreement between steady-state predictions and experiments is obtained for temperature and velocity profiles as well as for the streamline contours and isotherms. The technique is further demonstrated by solving the transient natural convection flow inside a partially filled horizontal cylinder with an adiabatic free surface and subjected to uniform wall heating.

---

Laminare freie Konvektion in horizontalen Zylindern

Zusammenfassung Es wurde eine numerische Berechnung der laminaren, freien Konvektion in gleichmäßig beheizten, teilweise oder ganz gefüllten, horizontalen Zylindern durchgeführt. Dabei wird eine Koordinatentransformation benützt, welche die Diskretisierung der Bewegungs- und der Energiegleichung vereinfacht. Das so resultierende System von partiellen Differentialgleichungen wird, zusammen mit seinen Randbedingungen, unter Verwendung einer Differenzenmethode für verschiedene Prandtl und Grashof-Zahlen sowie für zwei verschiedene Gittergrößen gelöst. Für den vollständig gefüllten Zylinder, für den experimentelle Daten verfügbar sind, wird die Strömung vorhergesagt. Dabei wird für stationäre Zustände gute Übereinstimmung zwischen Rechnung und Experiment erzielt. Dies gilt sowohl für den Verlauf der Stromlinien als auch für den der Isothermen. Das Verfahren wird weiterhin am Beispiel der Berechnung instationärer, freier Konvektion in einem partiell gefüllten, horizontalen Zylinder demonstriert, wobei eine adiabate, freie Oberfläche und gleichmäßige Beheizung der Wand angenommen sind.

---

Nomenclature g acceleration due to gravity, m/s² - Gr _R ^* modified Grashof number =gqR⁴/kv² - Gr _R Grashof number =gTR³/v² - H heat function vector, dimensionless - k thermal conductivity, W/mK - L(Y) cord length associated with coordinateY, dimensionless - Pr Prandtl number=v/ - q wall heat flux, W/m² - R radius, m - r(X, Y,Z) distance of a boundary point from the reference axis, dimensionless - S vector derived from the flow field solution, dimensionless - T temperature, K - T _w wall temperature, K - T reference temperature, K - t time, s - u, v velocity components inx, y directions, m/s - U, V dimensionless velocity components inX- and Y-direction normalized withU - U reference velocity=gqR²/k or gTR, m/s - V velocity vector, dimensionless - W vorticity vector, dimensionless - W vorticity, dimensionless - x, y, z cartesian coordinates, m - X, Y, Z cartesian coordinates normalized with a reference length, dimensionless Greek letters thermal diffusivity, m²/s - coefficient of thermal expansion, K^–1 - ,,, non-dimensional coordinates in the transformed domain - non-dimensional temperature =(T–T)_k/q^R or T–T/T_w–T - v kinematic viscosity, m²/s - non-dimensional time=v/R² Gr_Rt or v/R² G _R ^* t - angle measured from the bottom of the cylinder, rads - ^* angle measured from the axis on (– ) plane, rads - heat potential, dimensionless - angle of incidence of the heat flux vector, rads - non-dimensional stream function - vector potential, dimensionless - grid size, dimensionless - ² Laplacian operator - gradient vector     

Stability characteristics of condensate films

The linear stability theory is used to study stability characteristics of laminar condensate film flow down an arbitrarily inclined wall. A critical Reynolds number exists above which disturbances will be amplified. The magnitude of the critical Reynolds number is in all practical situations so small that a laminar gravity-induced condensate film can be expected to be unstable. Several stabilizing effects are acting on the film flow; at an inclined wall these effects are due to surface tension, gravity and condensation mass transfer.

---

Zusammenfassung Mit Hilfe der linearen Stabilitätstheorie werden die Stabilitätseigenschaften laminarer Kondensatfilme an einer geneigten Wand untersucht. Es zeigt sich, daß Kondensatfilme in jedem praktischen Fall ein unstabiles Verhalten aufweisen. Der stabilisierende Einfluß von Oberflächenspannung, Schwerkraft und Stoffübertragung durch Kondensation bewkkt jedoch, daß Störungen in bestimmten Wellenlängenbereichen gedämpft werden.

---

Nomenclature c=c^*/u₀ complex wave velocity, celerity, dimensionless - c^*=c _r ^* + i c _i ^* complex wave velocity, celerity, dimensional - c_p specific heat at constant pressure - g gravitational acceleration - h_fg latent heat - k thermal conductivity of liquid - p^* pressure - p=p^*/u₀ ² dimensionless pressure - Pe=Pr Re^* Peclet number - Pr Prandtl number - Re^*=u₀ / Reynolds number (defined with surface velocity) - S temperature perturbation amplitude - t^* time - t=t^* u₀/ dimensionless time - T temperature - T_s saturation temperature - T_w wall temperature - T=T_s-T_w temperature drop across liquid film - u^*, v^* velocity components - u=u^*/u₀ dimensionless velocity components - v=v^*/u₀ dimensionless velocity components - u₀ surface velocity of undisturbed film flow - v _g ^* vapor velocity - x^*, y^* coordinates - x=x^*/ dimensionless coordinates - y=y^*/ dimensionless coordinates Greek Symbols =^* wave number, dimensionless - ^*=2 /^* wave number dimensional - ^* wave length, dimensional - =^*/ wave length, dimensionless - local thickness of undisturbed condensate film - kinematic viscosity, liquid - density, liquid - _g density vapor - surface tension - = (1 +) film thickness of disturbed film, Fig. 1 - stream function perturbation amplitude - angle of inclination Base flow quantities are denoted by^–, disturbance quantities are denoted by.     

Binary laminar boundary layer on a vertical surface in the presence of combined free and forced convection

Heat and mass transfer at a vertical surface is examined in the case of combined free and forced convection. The boundary layer equations, transformed to ordinary differential equations, contain a parameter that determines the effect of free convection on the forced motion. Criteria are offered for differentiating the free-convection, forced-convection, and combined regimes.Notation x, y coordinates - u, v velocity components - g acceleration of gravity - T temperature - kinematic viscosity - coefficient of thermal expansion - a thermal diffusivity - ₁ partial vapor density - D diffusion coefficient - W₂ mass velocity of air - independent variable - _w shear stress at wall - thermal conductivity - r latent heat of phase transition - , dimensionless temperature and partial vapor density - m^* the complex (m ₁–m _1w )/(1–m(_1w ) - c_p specific heat at constant pressure - G Grashof number - R Reynolds number - P Prandtl number - S Schmidt number     

Torsion of two bonded layers by a rigid disk

The problem considered in this paper describes the torsion of a homogeneous isotropic elastic layer (0zd ₁) of finite thickness d ₁, perfectly bonded to another elastic layer (-d ₂z0) of finite thickness d ₂. The problem is reduced to the solution of a Fredholm integral equation of the second kind. The solutions are given for some particular cases.

---

Sommario In questo lavoro si considera il problema della torsione di uno strato elastico omogeneo ed isotropo (0zd ₁) di spessore finito d ₁, perfettamente incollato ad un altro strato elastico (-d ₂z0) di spessore finito d ₂. II problema é ricondotto alla soluzione di una equazione integrale di Freedholm del secondo ordine. Le soluzioni sono ottenute per alcuni casi particolari.

     

Consecutive chemical reactions in an annular reactor with non-newtonian flow

The purpose of this paper is to analyze the homogeneous consecutive chemical reactions carried out in an annular reactor with non-Newtonian laminar flow. The fluids are assumed to be characterized by a Ostwald-de Waele (powerlaw) model and the reaction kinetics is considered of general order. Effects of flow pseudoplasticity, dimensionless reaction rate constants, order of reaction kinetics and ratio of inner to outer radii of reactor on the reactor performances are examined in detail.Nomenclature c _A concentration of reactant A, g.mole/cm³ - c _B concentration of reactant B, g.mole/cm³ - c _A0 inlet concentration of reactant A, g.mole/cm³ - C ₁ dimensionless concentration of A, c _A/c _A0 - C ₂ dimensionless concentration of B, c _B/c _A0 - C ₁ dimensionless bulk concentration of A - C ₂ dimensionless bulk concentration of B - D _A molecular diffusivity of A, cm²/sec - D _B molecular diffusivity of B, cm²/sec - k _A first reaction rate constant, (g.mole/cm³)^1–m /sec - k _B second reaction rate constant, (g.mole/cm³)^1–n /sec - K ₁ dimensionless first reaction rate constant, k _A r ₀ ² c _A0 ^m–1 /D _A - K ₂ dimensionless second reaction rate constant, k _B r ₀ ² c _A0 ^n–1 /D _B - K apparent viscosity, dyne(sec) ^m /cm² - m order of reaction kinetics - n order of reaction kinetics - P pressure, dyne/cm² - r radial coordinate, cm - r _i radius of inner tube, cm - r _max radius at maximum velocity, cm - r _o radius of outer tube, cm - R dimensionless radial coordinate, r/r _o - s reciprocal of rheological parameter for power-law model - u local velocity, cm/sec - u _max maximum velocity, cm/sec - u bulk velocity, cm/sec - U dimensionless velocity, u/u - z axial coordinate, cm - Z dimensionless axial coordinate, zD _A/r ₀ ² /u - ratio of molecular diffusivity, D _B/D _A - ratio of inner to outer radius of reactor, r _i/r _o - ratio of radius at maximum velocity to outer radius, r _max/r _o