A sinapic acid–calix[4]arene hybrid selectively binds Pb over Hg and Cd

The binding affinity for Pb²⁺, Cd²⁺ and Hg²⁺ of the sinapic acid–calix[4]arene hybrid 2, having four sinapyl pendants at the upper rim, has been investigated via an UV–Vis study. Compound 2 has better complexing ability than the monomeric p-phenetidine derivative 1. This highlights that the clustering of sinapyl units in a basket-like structure, dictated by the calixarene scaffold, greatly enhances the complexing properties. Ligand 2 forms complexes even with Hg²⁺, which is not complexed by 1 at all; the complexes formed by 2 with Pb²⁺ and Cd²⁺ are much stronger than the analogous complexes formed by 1. The UV–Vis investigation shows that the hybrid 2 markedly favors Pb²⁺ over Cd²⁺ and Hg²⁺. Information on the structural properties of the complex species was obtained by ¹H NMR spectroscopy. NMR data show that all three metal ions are placed into the cavity consisting of the calixarene scaffold and the sinapyl pendants, though their binding affects the coordinating regions to a different extent.     

New photochromic chemosensors for Hg and F

Two new chemosensors (1a and 1b) based on photochromic dithienylcyclopentene were designed and synthesized, and their spectral behaviors toward various metal ions and anions were investigated in detail. Compounds show excellent optical properties and distinguish Hg²⁺ and F⁻ in CH₃CN. Job’s plot reveals that the presence of Hg²⁺ induces the formation of a 1:1 complex between 1a or 1b and Hg²⁺. From the spectral responses and ¹H NMR analysis, the deprotonation of the thioamide protons is proposed to explain the sensing mechanism for 1a and 1b toward F⁻. It is found that 1a and 1b exhibit ring-opening and ring-closing photoisomerization with UV-vis light irradiation. Furthermore, their photochromic properties can be modulated by Hg²⁺ and F⁻ ions. Moreover, 1a and 1b in photostationary states become promising sensors for Hg²⁺ and F⁻ with high selectivity.     

Two dansyl fluorophores bearing amino acid for monitoring Hg in aqueous solution and live cells

A series of compounds (1-4) bearing one or two dansyl fluorophore(s) based on a Lys amino acid were synthesized in solid phase synthesis. Among them, two dansyl labeled Lys amino acid 3 detected Hg²⁺ in a 100% aqueous solution with high sensitivity (K_d=4.3 nM) via a turn-on response. Compound 3 was applied for monitoring Hg²⁺ in environmental and biological fields. 3 showed a hypersensitive response to Hg²⁺ without interferences from other metal ions and satisfied the requirements for monitoring the maximum allowable level (2 ppb) of mercury ions in drinking water demanded by EPA. In addition, 3 penetrated living HeLa cells and detected intracellular Hg²⁺. The organic spectroscopic data revealed the two sulfonamide and amide groups of 3 played a key role in stabilizing the 3-Hg²⁺ complex.     

Salicylaldehyde hydrazones as fluorescent probes for zinc ion in aqueous solution of physiological pH

Salicylaldehyde hydrazones of 1 and 2 were synthesized and their potential as fluorescent probes for zinc ion was investigated in this paper. Both of the probes were found to show fluorescence change upon binding with Zn²⁺ in aqueous solutions, with good selectivity to Zn²⁺ over other metal ions such as alkali/alkali earth metal ions and heavy metal ions of Pb²⁺, Cd²⁺ and Hg²⁺. They showed 1:2 metal-to-ligand ratio when their Zn²⁺ complex was formed. By introducing pyrene as fluorophore, 2 showed interesting ratiometric response to Zn²⁺. Under optimal condition, 2 exhibited a linear range of 0-5.0 μM and detection limit of 0.08 μM Zn²⁺ in aqueous buffer, respectively. The detection of Zn²⁺ in drinking water samples using 2 as fluorescent probe was successful.     

A selective fluorogenic chemodosimeter for Hg based on the dimerization of desulfurized product

A simple Hg²⁺-selective chemodosimetric system based on thiosemicarbazone was investigated. The transformation of thiosemicarbazone into semicarbazone selectively exerted by Hg²⁺ ions and the dimerization of semicarbazone resulted in a pronounced OFF–ON-type fluorescent signaling behavior. The coexistent metal ions, such as Fe³⁺, Ca²⁺, Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺, Mg²⁺, Na⁺, K⁺, and Fe²⁺, had no obvious interference with the detection of Hg²⁺. In addition, S₁₂–Hg²⁺ plays a high sensitivity for basic anions to form an ‘OFF–ON–OFF’ type signaling behavior, with the Hg²⁺-induced emission spectra can be quenched. Moreover, test strips based on S₁₂ exhibited a good selectivity to Hg²⁺. We believe the test strips could act as a convenient and efficient Hg²⁺ test kit.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

A reversible fluorescent–colorimetric Schiff base sensor for Hg ion

A simple (R)-(−)-2-phenylglycinol functionalized Schiff base L1 and its characterization as a fluorescent–colorimetric sensor for Hg²⁺ ion are described. The UV–vis and fluorescence analysis in methanol and aqueous solution show complex formation between L1 and Hg²⁺ ion with a micromolar association constant. Competition experiments performed for the acetate salts of Hg²⁺, Zn²⁺, Co²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, and Ba²⁺ revealed that compound L1 exhibits high selectivity toward Hg²⁺ displaying a color change easily detectable by naked-eye and a turn-off fluorescent effect due to a chelation-enhanced quenching (CHEQ) mechanism. Moreover, addition of EDTA to L1–Hg²⁺ recovers the fluorescence and color offering receptor L1 as a reversible sensor for real-time applications.     

Novel versatile imine—enamine chemosensor based on 6-nitro-4-oxo-4H-chromene for ion detection in solution, solid and gas-phase: synthesis, emission, computational and MALDI-TOF-MS studies

A new versatile emissive molecular probe (3) derived from 1,5-bis(2-aminophenoxy)-3-oxopenthane bearing two units of 6-nitro-4-oxo-4H-chromene- has been prepared by a Schiff-base condensation method using conventional and green, ultrasound-aided, methods. The dry yellow powder was characterized as the imine species (3). These imine species, however, where found to rapidly convert to their enamine form (4) in solution, under the presence of water traces. This reaction was computationally studied through Density Functional Theory (DFT) in order to investigate the relative stability of the molecular pair 3/4. The sensing properties of the enamine (4) towards various metal ions were investigated via absorption and fluorometric titrations in solution in dichloromethane, acetonitrile and DMSO. The compound shows a fluorescent turn-off response in the presence of Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Ag⁺ over the other metal ions studied, such as Li⁺, Na⁺, K⁺, Ca²⁺, Co²⁺ and Ni²⁺, being stronger for Cu²⁺ and Hg²⁺. The gas phase chemosensing abilities of (3) were also explored suggesting (3) as new active MALDI-TOF-MS matrix by two dry methods showing a strong selectivity towards Cu²⁺ and Ag⁺. Our preliminary results show promising uses of (3) supported in PPMA films as metal ion solid chemosensor.     

Dual-mode recognition of transition metal ions by bis-triazoles chained pyrenes

Fluorescent chemosensors 7−10, with variable methylene chain length as spacers between the two triazole methyl ether units, have been synthesized under ‘Click’ condition, where the bistriazoles are used as the metal ion binding sites and the pyrenes as the fluorophores. Compound 10, having the longest methylene chain among 7−10, shows monomer and excimer fluorescence quenching in acetonitrile toward Ni²⁺, Pb²⁺, Cu²⁺, Hg²⁺, and Cr³⁺ ions, however, it shows an enhanced monomer but a decreased excimer emission when complexed with Cd²⁺ and Zn²⁺ ions.     

Synthesis,characterization and metal ion complexation and extraction capabilities of calix[4]arene Schiff base compounds

The syntheses, characterization and metal ion complexation and extraction capabilities of six new calix[4]arene Schiff base compounds, 5–10, are reported. The preparation of the compounds was achieved by the condensation of 5,17-diamino-11,23-di-tert-butyl-25,27-di-n-butoxy-26,28-dihydroxycalix[4]arene with the appropriate aldehyde (5-bromosalicylaldehyde for 5, 4-anisaldehyde for 6, 4-(dimethylamino)benzaldehyde for 7, 9-anthracenecarboxaldehyde for 8, 1-pyrenecarboxaldehyde for 9, and 9-fluorenecarboxaldehyde for 10) in refluxing ethanol. The compounds were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, high-resolution mass spectrometry and elemental analysis. The X-ray crystal structures of 7, 8 and 9 (as dichloromethane solvates) revealed that the calixarene molecules adopt H-bond stabilized, distorted-cone conformations and form centrosymmetric dimers in the solid state. Compounds 5–10 did not form host–guest complexes with NEt₄[(bdt)MoO₂(OSiPh₃)] (bdt^2–=benzene-1,2-dithiolate), a potential precursor for biologically relevant oxosulfido-Mo(VI/V) enzyme models; such host–guest complexes have the potential to stabilize these sought-after but highly reactive model compounds. In addition, the capabilities of 5–10 to extract selected metal ions (Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Cd²⁺ and Hg²⁺) from an aqueous into an organic phase have been assessed by picrate extraction experiments. Compound 5 displayed exceptional selectivity towards Ni²⁺, compound 7 exhibited enhanced extraction towards all of the metal ions tested and compounds 6, 9 and 10 showed very high selectivity towards Hg²⁺. On the other hand, compound 8 exhibited negligible capacity to extract any of the metal ions tested.     

Synthesis and characterization of novel indole-containing half-crowns as new emissive metal probes

Two new indole derivatives have been synthesized by a one-pot procedure and their potential as fluorescence probes for metal ions was investigated. The sensor capability of 1 and 2 toward cations such as Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁻ was studied in dichloromethane solution by absorption, fluorescence emission, and ¹H NMR titrations. Both probes showed selectivity for Ag⁺ and Hg²⁺ ions. The results suggest that these compounds may serve as promising models for future design of novel and more potent sensors.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Mesitylene based azo-coupled chromogenic tripodal receptors—a visual detection of Ag(I) in aqueous medium

A series of novel tripodal ligands 3a-d, based on a mesitylene anchor, containing aza-thioethers as donor atoms and coupled with 4-(4/3/2-nitrophenyl)azophenol or 4-(2-chlorophenyl)azophenol have been synthesized as chromogenic receptors, which are highly selective for silver(I). The complexation behavior of 3a-d with various metal ions has been evaluated by UV-vis spectrometry in dioxane/water (1:9/v:v) solution at 25 °C. The UV-vis spectra show that the complexation of 3a-c with Ag⁺ have pronounced bathochromic shifts accompanied by a unique color change in the solution from yellow to red, which is visible with the naked eye. The ligands do not show any significant change on addition of other metal ions like Li⁺, Na⁺, K⁺, Sr²⁺, Ca²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Ni²⁺, and Cu²⁺ and thus are highly specific and selective for Ag⁺ in the aqueous medium.     

New fluoro- and chromogenic chemosensors for the dual-channel detection of Hg and F

Two novel thioxanthone-based compounds 1a and 1b which possess thiosemicarbazone as binding site were developed for the dual-channel detection of Hg²⁺ and F⁻. Upon treatment with Hg²⁺ and F⁻ separately, the probes’ fluorescence is effectively quenched, meanwhile 1a and 1b show evident naked-eye color variations after addition of F⁻: colorless to yellow. They both exhibit specific sensitivity and selectivity for Hg²⁺ or F⁻ over other examined ions in tetrahydrofuran (THF) solution.     

Luminophore-immobilized mesoporous silica for selective Hg sensing

Novel mesoporous silica-immobilized rhodamine (MSIR) and silica particle-immobilized rhodamine (SPIR) anchored by a tren (N(CH₂CH₂NH₂)₃) were synthesized. The binding and adsorption abilities of both MSIR and SPIR for metal cations were investigated with fluorophotometry and ion chromatography, respectively. Both MSIR and SPIR show selectivity for Hg²⁺ ion over other metal cations because the Hg²⁺ ion selectively induces a ring opening of the rhodamine fluorophores. The sensitivity of the MSIR for Hg²⁺ ion is greater than that of the SPIR and the MSIR adsorbs 70% of Hg²⁺ ion while the SPIR does only 40%. The MSIR can be also easily recovered by treatment of a solution of TBA⁺OH⁻. For the application of Hg²⁺ detection in the environmental field, the MSIR-coated glass plate is also developed and exhibits an excellent function in visual and fluorescence changes with Hg²⁺ ion.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Zinc selective chemosensor based on pyridyl-amide fluorescence

Chemosensors are developed to image zinc ions. Fluorescence enhancement due to Zn²⁺ binding is an excellent way to detect its presence. A chemosensor for Zn²⁺ based on dipicolylamine (DPA) groups connected by a pyridyl amide backbone has been synthesized. Addition of 2-chloroacetyl chloride to 2,6-diaminopyridine affords 2,6-bis(chloroethylamido)pyridine, which is converted to the sensor BADPA-P by 2,2′-dipicolylamine displacement of chlorine. This compound along with two others, the mono-DPA, ADPA-P and the benzyl in place of pyridyl, BADPA-B, present three potential Zn²⁺ sensors. It was found that BADPA-P in the presence of Zn²⁺ shows a large increase in fluorescence, whether in polar organic or aqueous environments. Its fluorescence in the presence of Cd²⁺, unlike with Zn²⁺, is not enhanced when excited at longer wavelengths. Proton NMR measurements, indicate two Zn²⁺ ions bind to BADPA-P. Also, Zn²⁺ enhances fluorescence even when other metal ions are present.     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

A triphenylamine based multi-analyte chemosensor for Hg and Cu ions in MeCN/H2O

A novel triphenylamine based oxidative chemosensor TOC was synthesized. The chromogenic and fluorogenic behaviors of TOC towards Hg²⁺ and Cu²⁺ ions in a binary mixture of MeCN/H₂O (9/1) were dramatically different. TOC displays colorimetric ‘naked eye’ recognition of Hg²⁺ and fluorogenic ‘turn on’ response towards Cu²⁺ via a unique cyclization reaction using two different detection modes. Moreover, TOCAZOL obtained from the oxidative cyclization reaction of TOC with Cu(ClO₄)₂ can be used as a selective fluorescent sensor toward Hg²⁺ ion.     

Synthesis, characterization, and evaluation of rhodamine based sensors for nerve gas mimics

Six new rhodamine-B based compounds were synthesized (1-6) and used as fluorescent turn-ON sensors for diethyl chlorophosphate (DCP) in aqueous media at pH 7.0. Compound 1 and 3 gave high fluorescent enhancement with DCP compared to the other compounds. Very high selectivity and sensitivity were observed as these compounds did not show significant fluorescent enhancement with dimethyl methylphosphonate (DMMP), HCl, and metal ions, such as Na⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺. Depending on the way the sensor is presented, results are instantaneous or observed over some minutes.