Highly selective detection of Hg ion by push–pull-type purine nucleoside-based fluorescent sensor

Highly selective detection of Hg²⁺ ion has been achieved using the push–pull-type purine nucleoside-based fluorescent sensor L1. The sensor L1 incorporating aza-18-crown-6 at C6 position of purine nucleoside, is highly sensitive and selective toward Hg²⁺ ion in CH₃CN–H₂O mixture (92/8, v/v). The detection limit for the fluorescent sensor L1 toward Hg²⁺ ion is 7.8 × 10⁻⁸.     

A logic gate-based fluorogenic probe for Hg detection and its applications in cellular imaging

A new colorimetric and fluorogenic probe (RN₃) based on rhodamine-B has been successfully designed and synthesized. It displays a selective response to Hg²⁺ in the aqueous buffer solution over the other competing metals. Upon addition of Hg²⁺, the solution of RN₃ exhibits a ‘naked eye’ observable color change from colorless to red and an intensive fluorescence with about 105-fold enhancement. The changes in the color and fluorescence are ascribed to the ring-opening of spirolactam in rhodamine fluorophore, which is induced by a binding of the constructed receptor to Hg²⁺ with the association and dissociation constants of 0.22 × 10⁵ M⁻¹ and 25.2 μM, respectively. The Job's plot experiment determines a 1:1 binding stoichiometry between RN₃ and Hg²⁺. The resultant “turn-on” fluorescence in buffer solution, allows the application of a method to determine Hg²⁺ levels in the range of 4.0–15.0 μM, with the limit of detection (LOD) calculated at 60.7 nM (3σ/slope). In addition, the fluorescence ‘turn-off’ and color ‘fading-out’ happen to the mixture of RN₃-Hg²⁺ by further addition of I⁻ or S²⁻. The reversible switching cycles of fluorescence intensity upon alternate additions of Hg²⁺ and S²⁻ demonstrate that RN₃ can perform as an INHIBIT logic gate. Furthermore, the potential of RN₃ as a fluorescent probe has been demonstrated for cellular imaging.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Luminophore-immobilized mesoporous silica for selective Hg sensing

Novel mesoporous silica-immobilized rhodamine (MSIR) and silica particle-immobilized rhodamine (SPIR) anchored by a tren (N(CH₂CH₂NH₂)₃) were synthesized. The binding and adsorption abilities of both MSIR and SPIR for metal cations were investigated with fluorophotometry and ion chromatography, respectively. Both MSIR and SPIR show selectivity for Hg²⁺ ion over other metal cations because the Hg²⁺ ion selectively induces a ring opening of the rhodamine fluorophores. The sensitivity of the MSIR for Hg²⁺ ion is greater than that of the SPIR and the MSIR adsorbs 70% of Hg²⁺ ion while the SPIR does only 40%. The MSIR can be also easily recovered by treatment of a solution of TBA⁺OH⁻. For the application of Hg²⁺ detection in the environmental field, the MSIR-coated glass plate is also developed and exhibits an excellent function in visual and fluorescence changes with Hg²⁺ ion.     

Ratiometric fluorescence probe for two-photon bioimaging of Cr in living cells

We presented a ratiometric fluorescent probe dansylamide–rhodamine dyad (DANS–RB) for selectively detecting Cr³⁺ in semi-aqueous solution. The detection mechanism relies on the fluorescent resonance energy transfer (FRET) process from the dansylamide (energy donor) to the rhodamine (energy acceptor) after the addition of Cr³⁺. The cell-permeability of DANS–RB was confirmed by the two-photon fluorescence microscopy experiments, which demonstrated DANS–RB was a good candidate for monitoring the intracellular Cr³⁺ level with the ratiometric fluorescent method. Combining the excellent selectivity, the ratiometric quantitative detection, and the cell-permeability, DANS–RB may find a broad application in the investigation on biologically relevant species in living cells.     

Two dansyl fluorophores bearing amino acid for monitoring Hg in aqueous solution and live cells

A series of compounds (1-4) bearing one or two dansyl fluorophore(s) based on a Lys amino acid were synthesized in solid phase synthesis. Among them, two dansyl labeled Lys amino acid 3 detected Hg²⁺ in a 100% aqueous solution with high sensitivity (K_d=4.3 nM) via a turn-on response. Compound 3 was applied for monitoring Hg²⁺ in environmental and biological fields. 3 showed a hypersensitive response to Hg²⁺ without interferences from other metal ions and satisfied the requirements for monitoring the maximum allowable level (2 ppb) of mercury ions in drinking water demanded by EPA. In addition, 3 penetrated living HeLa cells and detected intracellular Hg²⁺. The organic spectroscopic data revealed the two sulfonamide and amide groups of 3 played a key role in stabilizing the 3-Hg²⁺ complex.     

Unexpected highly selective fluorescence ‘turn-on’ and ratiometric detection of Hg based on fluorescein platform

Methylated fluorescein 1 was explored for fluorescence ‘turn-on’ and ratiometric detection of Hg²⁺ in THF and CH₂Cl₂/MeOH (v/v=9:1), respectively, with unexpected high selectivity. In the presence of Hg²⁺, characteristic structured absorption band of 1 diminished and a new sharp band appeared at 445 nm. Meanwhile a blue shifted and enhanced emission was observed. The ratio of the fluorescence intensity at 559 and 478 nm increased linearly with [Hg²⁺], and solution color changing from yellow to cyan under irradiation at 365 nm in CH₂Cl₂/MeOH. Job plot indicated a 1:1 stoichiometry for 1-Hg²⁺ complex in solution. ¹H NMR titration and IR spectra suggested the coordination of carbonyl group in xanthene moiety to Hg²⁺, affording its spectral behavior. Compound 2 bearing two triazolyl amino esters in place of methyl group showed quite similar behavior to Hg²⁺, which indicated that substituents did not interfere with the specific binding behavior of fluorescein platform. Our work presents a new way to explore xanthene dyes as new chemosensors by modulating electron density on the xanthene ring through non-covalent interactions with carbonyl group.     

A highly selective fluorescent probe for Hg based on a rhodamine-coumarin conjugate

A fluorescent probe 1 for Hg²⁺ based on a rhodamine-coumarin conjugate was designed and synthesized. Probe 1 exhibits high sensitivity and selectivity for sensing Hg²⁺, and about a 24-fold increase in fluorescence emission intensity is observed upon binding excess Hg²⁺ in 50% water/ethanol buffered at pH 7.24. The fluorescence response to Hg²⁺ is attributed to the 1:1 complex formation between probe 1 and Hg²⁺, which has been utilized as the basis for the selective detection of Hg²⁺. Besides, probe 1 was also found to show a reversible dual chromo- and fluorogenic response toward Hg²⁺ likely due to the chelation-induced ring opening of rhodamine spirolactam. The analytical performance characteristics of the proposed Hg²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Hg²⁺ from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ and the detection limit is 4.0 × 10⁻⁸ mol L⁻¹. The determination of Hg²⁺ in both tap and river water samples displays satisfactory results.     

A fluorescent chemosensor for Hg based on naphthalimide derivative by fluorescence enhancement in aqueous solution

Naphthalimide derivative (compound 1) containing hydrophilic hexanoic acid group was synthesized and used to recognize Hg²⁺ in aqueous solution. The fluorescence enhancement of 1 is attributed to the formation of a complex between 1 and Hg²⁺ by 1:1 complex ratio (K = 2.08 × 10⁵), which has been utilized as the basis of fabrication of the Hg²⁺-sensitive fluorescent chemosensor. The comparison of this method with some other fluorescence methods for the determination of Hg²⁺ indicated that the method can be applied in aqueous solution rather than organic solution. The analytical performance characteristics of the proposed Hg²⁺-sensitive chemosensor were investigated. The chemosensor can be applied to the quantification of Hg²⁺ with a linear range covering from 2.57 × 10⁻⁷ to 9.27 × 10⁻⁵ M and a detection limit of 4.93 × 10⁻⁸ M. The experiment results show that the response behavior of 1 toward Hg²⁺ is pH independent in medium condition (pH 4.0–8.0). Most importantly, the fluorescence changes of the chemosensor are remarkably specific for Hg²⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the response of the chemosensor toward Hg²⁺ is fast (response time less than 1 min). In addition, the chemosensor has been used for determination of Hg²⁺ in hair samples with satisfactory results, which further demonstrates its value of practical applications.     

A specific and ratiometric chemosensor for Hg based on triazole coupled ortho-methoxyphenylazocalix[4]arene

Calix[4]arene 3, which contains two distal triazole groups on the lower rim and two distal o-methoxyphenylazo groups on the upper rim, was synthesized and found to be a specific and ratiometric sensor for Hg²⁺ in a polar protic solvent. A series of o-methoxyphenylazo derivatives (3, 4, 5, 7, and 9) were synthesized, which proved that the lower-rim triazoles and the hydroxyl azophenol(s) were the major ligands for metal ion binding. Though analogues 4 and 10 showed some sensitivity for Hg²⁺, compound 3 was the only ratiometric chemosensor for Hg²⁺ among the series of azocalix[4]arenes synthesized in this work. The formation of 3·Hg²⁺ complex was supported by UV/vis and NMR titration studies and Mass spectrometry. Based on the symmetrical features of NMR spectra of 3·Hg²⁺, the complex is believed to be symmetrical with respect to the calix[4]arene cavity. Furthermore, the complex was determined to be 1:1 binding stoichiometry by Job’s plot, and the association constant was determined to be 4.02×10³ M⁻¹ using Benesi-Hildebrand plot.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

Rhodamine-based chemodosimeter for fluorescent determination of Hg in 100% aqueous solution and in living cells

A rhodamine spirolactam derivative (1) bearing a hydrophilic carboxylic acid group is developed as a fluorescent chemodosimeter for bivalent mercury ions (Hg²⁺) in 100% aqueous solution. It exhibits a highly sensitive “turn-on” fluorescent response toward Hg²⁺ with a 42-fold fluorescence intensity enhancement under 1 equiv. of Hg²⁺ added. The chemodosimeter can be applied to the quantification of Hg²⁺ with a linear range covering from 3.0 × 10⁻⁷ to 1.0 × 10⁻⁵ M and a detection limit of 9.7 × 10⁻⁸ M. Most importantly, the fluorescence changes of the chemodosimeter are remarkably specific for Hg²⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the experiment results show that the response behavior of 1 towards Hg²⁺ is pH independent in neutral condition (pH 5.0–8.0) and the response is fast (response time less than 3 min). Furthermore, the ring-opening mechanism of the rhodamine spirolactam induced by Hg²⁺ was supported by NMR, MS, and DFT theoretical calculations. In addition, the proposed chemodosimeter has been used to detect Hg²⁺ in water samples and image Hg²⁺ in living cells with satisfying results.     

New photochromic chemosensors for Hg and F

Two new chemosensors (1a and 1b) based on photochromic dithienylcyclopentene were designed and synthesized, and their spectral behaviors toward various metal ions and anions were investigated in detail. Compounds show excellent optical properties and distinguish Hg²⁺ and F⁻ in CH₃CN. Job’s plot reveals that the presence of Hg²⁺ induces the formation of a 1:1 complex between 1a or 1b and Hg²⁺. From the spectral responses and ¹H NMR analysis, the deprotonation of the thioamide protons is proposed to explain the sensing mechanism for 1a and 1b toward F⁻. It is found that 1a and 1b exhibit ring-opening and ring-closing photoisomerization with UV-vis light irradiation. Furthermore, their photochromic properties can be modulated by Hg²⁺ and F⁻ ions. Moreover, 1a and 1b in photostationary states become promising sensors for Hg²⁺ and F⁻ with high selectivity.     

New fluoro- and chromogenic chemosensors for the dual-channel detection of Hg and F

Two novel thioxanthone-based compounds 1a and 1b which possess thiosemicarbazone as binding site were developed for the dual-channel detection of Hg²⁺ and F⁻. Upon treatment with Hg²⁺ and F⁻ separately, the probes’ fluorescence is effectively quenched, meanwhile 1a and 1b show evident naked-eye color variations after addition of F⁻: colorless to yellow. They both exhibit specific sensitivity and selectivity for Hg²⁺ or F⁻ over other examined ions in tetrahydrofuran (THF) solution.     

A reversible fluorescent–colorimetric Schiff base sensor for Hg ion

A simple (R)-(−)-2-phenylglycinol functionalized Schiff base L1 and its characterization as a fluorescent–colorimetric sensor for Hg²⁺ ion are described. The UV–vis and fluorescence analysis in methanol and aqueous solution show complex formation between L1 and Hg²⁺ ion with a micromolar association constant. Competition experiments performed for the acetate salts of Hg²⁺, Zn²⁺, Co²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, and Ba²⁺ revealed that compound L1 exhibits high selectivity toward Hg²⁺ displaying a color change easily detectable by naked-eye and a turn-off fluorescent effect due to a chelation-enhanced quenching (CHEQ) mechanism. Moreover, addition of EDTA to L1–Hg²⁺ recovers the fluorescence and color offering receptor L1 as a reversible sensor for real-time applications.     

Ratiometric fluorescence chemosensors for copper(II) and mercury(II) based on FRET systems

A system based on FRET mechanism, comprising a coumarin donor and a rhodamine acceptor, was developed for the selective and quantitative detection of metal ions. Fluorescent chemosensors RCs, linked by 1,2-diethylamine, exhibit significant fluorescence enhancement and excellent selectivity toward Cu²⁺. Fluorescent probes CRB and CR6G, linked by hydrazide, function as ratiometric receptors for Cu²⁺ chromogentically and fluorogentically in organic-aqueous media. Furthermore, the characteristic rhodamine-based fluorescence response of CRB (excitation at 550 nm) exhibits high selectivity for Hg(II). The construction of this kind of universal FRET system opens a broader prospect for future design of ratiometric fluorescent probes.     

Rhodamine urea derivatives as fluorescent chemosensors for Hg

New rhodamine derivatives bearing urea group have been synthesized for the detection of metal ions. Especially, the dimeric system 2 displayed a selective fluorescent enhancement and colorimetric change upon the addition of Hg²⁺, in which the spirolactam (nonfluorescent) to ring opened amide (fluorescent) process was utilized. The association constant of 2 with Hg²⁺ was calculated as 3.2 × 10⁵ M⁻¹.     

Fluorogenic ratiometric dipodal optode containing imine-amide linkages: Exploiting subtle thorium (IV) ion sensing

The (13E,19E)-N1′,N3′-bis[4-(diethylamino)-2-hydroxybenzylidene]malonohydrazide (L) has been developed for the detection of Th⁴⁺ ions using dual channel signalling system. The UV–vis absorbance and fluorescence spectroscopic data revealed the formation of L–Th⁴⁺ complex in 1:1 equilibrium. The density functional theory (DFT) also confirms the optimum binding cavity for the recognition of metal ion. The binding constant computed from different mathematical models for an assembly of L–Th⁴⁺. The detection limit of L for Th⁴⁺ recognition is to a concentration down to 0.1 μM (0.023 μg g⁻¹). The present sensing system is also successfully applied for the detection of Th⁴⁺ ion present in soil near nuclear atomic plants.     

Hg- and Cu-selective fluoroionophoric behaviors of a dioxocyclam derivative bearing anthrylacetamide moieties

New dioxocyclam derivatives bearing two anthracene fluorophores were prepared, and their fluoroionophoric properties toward transition metal ions were investigated. Chemosensor 2 having anthrylacetamide moieties exhibited pronounced Hg²⁺- and Cu²⁺-selective fluoroionophoric properties in aqueous acetonitrile solution over other representative transition metal ions, as well as alkali and alkaline earth metal ions. Chemosensor 2 also exhibited Hg²⁺ and Cu²⁺ selectivity under competitive conditions in the presence of physiologically and environmentally important metal ions. The detection limits for the sensing of Hg²⁺ and Cu²⁺ ions were 7.8 × 10⁻⁶ and 1.5 × 10⁻⁶ M, respectively, in aqueous 95% acetonitrile solution.     

Highly selective and sensitive fluorescent chemosensor for Hg in aqueous solution

A new indole-based fluorescent chemosensor 1 was prepared and its metal ion sensing properties were investigated. It exhibits high sensitivity and selectivity toward Hg²⁺ among a series of metal ions in H₂O-EtOH (7:1, v/v). The association constant of the 1:1 complex formation for 1-Hg²⁺ was calculated to be 9.57 × 10³ M⁻¹, and the detection limit for Hg²⁺ was found to be 2.25 × 10⁻⁵ M. Computational results revealed that 1 and Hg²⁺ ion formed with a central tetrahedron-coordinated Hg²⁺.