Chemiluminescence method for the determination of mitoxantrone by the enhancement of the tris-(4,7-diphenyl-1,10-phenanthrolinedisulfonic acid)ruthenium(II)–cerium(IV) system

2,5-Dimercapto-1,3,4-thiadiazole (DMTD) self-assembled monolayer on gold electrode was prepared and investigated by electrochemical measurement. The DMTD/Au electrode exhibited a significantly increased sensitivity and selectivity for Pb(II) in acetate buffer (pH 5.5) at a potential of −1.0 V (vs Ag/AgCl) for 4 min by anodic stripping voltammetry. The influence of various experimental parameters on the voltammetric response was studied. Under the optimized working conditions, the dependence of the stripping peak current response on concentration of Pb(II) was linear in the range of 1–45 μmol L⁻¹ with a correlation coefficient of 0.9988, and the detection limit was 0.10 μmol L⁻¹. The relative standard deviation of the results was 3.4% for six successive determinations of a 20 μmol L⁻¹ Pb(II) solution. A study of interfering substances was also performed. The method was applied to the determination of Pb(II) in water samples with satisfactory results. Correspondence: Hong Qun Luo, School of Chemistry and Chemical Engineering, Southwest University, 400715 Chongqing, China     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

Highly sensitive and simple method for measurement of pipecolic acid using reverse-phase ion-pair high performance liquid chromatography with tris(2,2'-bipyridine)ruthenium(III) chemiluminescence detection

A new, highly sensitive chemiluminescence method for measurement of pipecolic acid in various substances such as human serum, cow's milk, beer, and apple juice has been developed. The method is based on reverse-phase ion-pair high performance liquid chromatographic separation and subsequent tris(2,2'-bipyridine)ruthenium(III) chemiluminescence detection. It was confirmed that imino acids show strong chemiluminescence upon mixing with tris(2,2'-bipyridine)ruthenium(III). A calibration graph, based on a standard pipecolic acid solution, was linear over the range 5.0x10(-9)M to 2.0x10(-5)M and the detection limit was 24fmol (signal-to-noise ratio=3). This highly sensitive and selective determination method can be applied to selected samples without purification or pre-concentration procedures. Compared to the previous HPLC methods, the proposed method is easier, more sensitive, and time-saving.     

Automated solid-phase extraction and high-performance liquid chromatographic determination of nitrosamines using post-column photolysis and tris(2,2'-bipyridyl) ruthenium(III) chemiluminescence

A sensitive and selective post-column detection system for nitrosamines is described. The principle upon which the detector works is that UV irradiation of aqueous solutions of nitrosamines leads to cleavage of the N-NO bond. The amine generated is subsequent detected by chemiluminescence using tris(2,2'-bipyridyl) ruthenium(III), which is on-line generated by photo-oxidation of the ruthenium(II) complex in the presence of peroxydisulfate. Factors affecting the photochemical and chemiluminescent reactions were optimized to minimise their contribution to the total band-broadening. This detection system was tested for N-nitrosodimethylamine, N-nitroso-diethylamine, N-nitrosomorpholine, N-nitrosopiperidine and N-nitrosopyrrolidine, which were separated on an ODS column by isocratic reversed-phase chromatography with acetonitrile-water containing 5 mM acetate buffer at pH 4.0. A linear relationship between analyte concentration and peak area was obtained within the range 0.13-500 microg l(-1) with correlation coefficients greater than 0.9995 and detection limits of between 0.03 and 0.76 microg l(-1). Intra- and inter-day precision values of about 1.2% RSD (n = 11) and 2.5% RSD (n = 10), respectively, were obtained. The sensitivity may increase from 9 to 280 times with respect to UV detection, depending on the nitrosamine in question. An automated solid-phase extraction (SPE) system was used in conjunction with HPLC to determine nitrosamine residues in waters. Detection limits within the range 0.10-3.0 ng l(-1) were achieved for only 250 ml of sample.     

Tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence

This paper critically reviews analytical applications of the chemiluminescence from tris(2,2'-bipyridyl)ruthenium(II) and related compounds published in the open literature between mid-1998 and October 2005. Following the introduction, which summarises the reaction chemistry and reagent generation, the review divides into three major sections that focus on: (i) the techniques that utilise this type of detection chemistry, (ii) the range of analytes that can be determined, and (iii) analogues and derivatives of tris(2,2'-bipyridyl)ruthenium(II).     

Solid-supported chemiluminescence and electrogenerated chemiluminescence based on a tris(2,2'-bipyridyl)ruthenium(II) derivative

We report a simple and efficient technique for the covalent immobilisation of a tris(2,2'-bipyridyl)ruthenium(II) derivative suitable for both chemiluminescence and electrochemiluminescence detection.     

Sensitive determination of metal ions by liquid chromatography with tris(2,2'-bipyridine) ruthenium (II) complex electrogenerated chemiluminescence detection.

Emetine dithiocarbamate metal complex, which is prepared from emetine, carbon disulfide, and metal (II), was found to indicate a large chemiluminescence intensity on the electrogenerated chemiluminescence of tris(2,2'-bipyridine)ruthenium(II). Liquid chromatography equipped with the chemiluminescence detection was developed for analyzing trace metal ions by use of the metal complex formation. The mixture of the Cu(II) and Co(II) complexes as a model sample was injected into the LC system. The two metal complexes and an excess emetine were successfully separated. The Cu(II) and Co(II) complexes were determined over the range 1-300 nM (the detection limit of 650 fg) and 30-5000 nM (the detection limit of 17 pg), respectively.     

Flow-injection chemiluminescence determination of enalapril maleate in pharmaceuticals and biological fluids using tris(2,2'-bipyridyl)ruthenium(II).

A chemiluminescence (CL) method using flow injection (FI) has been investigated for the rapid and sensitive determination of enalapril maleate. The method is based on the CL reaction of the drug with tris(2,2'-bipyridyl)ruthenium(II), Ru(bipy)3(2+) and acidic potassium permanganate. After selecting the best operating parameters, calibration graphs were obtained over concentration ranges of 0.005-0.2 microg/ml and 0.7-100 microg/ml with a detection limit (S/N=2) of 1.0 ng/ml. The average % found was 99.9 +/- 0.7 and 100.2 +/- 0.3 for the two concentration ranges respectively. %RSD (n=10) for 5.0 microg/ml was 0.44. The method was successfully applied to the determination of enalapril maleate in dosage forms and biological fluids without interferences.     

Enhancement of the chemiluminescence of penicillamine and ephedrine after derivatization with aldehydes using tris(bipyridyl)ruthenium(II) peroxydisulfate system and its analytical application

A novel sequential injection (SI) method was developed for the determination of penicillamine (PA) and ephedrine (EP) based on the reaction of these drugs with tris(bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) and peroxydisulfate (S₂O₈²⁻) in the presence of light. Derivatization of PA and EP with aldehydes has resulted in a significant enhancement of the chemiluminescence emission signal by at least 25 times for PA and 12 times for EP, leading to better sensitivities and lower detection limits for both drugs. The instrumental setup utilized a syringe pump and a multiposition valve to aspirate the reagents, (Ru(bpy)₃²⁺ and S₂O₈²⁻), and a peristaltic pump to propel the sample. The experimental conditions affecting the derivatization reaction and the chemiluminescence reaction were systematically optimized using the univariate approach. Under the optimum conditions linear calibration curves between 0.2–24 μg mL⁻¹ for PA and 0.2–20 μg mL⁻¹ for EP were obtained. The detection limits were 0.1 μg mL⁻¹ for PA and 0.03 μg mL⁻¹ for EP. The procedure was applied to the analysis of PA and EP in pharmaceutical products and was found to be free from interferences from concomitants usually present in these preparations.     

Determination of β-blockers in pharmaceutical preparations and human urine by high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly selective and sensitive detection method based on tris(2,2′-bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] electrogenerated chemiluminescence (ECL) has been developed for the quantitative determination of β-blockers in both pharmaceutical preparations and human urine samples. The ECL emission is based on the reaction between electro-oxidized Ru(bpy)₃³⁺ and the secondary amino groups on the β-blockers. The ECL intensities for the β-blockers were strongly dependent on the pH at which the ECL detections were conducted, with the maximum intensities being obtained at pH 9.0. Under the optimal condition, the detection limit for atenolol and metoprolol were almost 0.5 μM (50 pmol) and 0.08 μM (8 pmol), respectively, with S/N of 3 and a linear working range that extends four orders of magnitude with relative standard deviations below 5% for 10 replicate injected samples. The concentrations of atenolol and metoprolol were determined in pharmaceutical preparations using flow injection analysis with Ru(bpy)₃²⁺ ECL detection based on standard addition method. The determined values by the present method showed acceptable agreement with the stated values by manufacturers. The determination of the five β-blockers in human urine samples was performed using HPLC-Ru(bpy)₃²⁺ ECL detection. The resulting chromatogram was much simpler than that obtained with HPLC-UV absorbance detection.     

Selective determination of amino acids using flow injection analysis coupled with chemiluminescence detection

The determination of the amino acids proline, histidine, tyrosine, arginine, phenylalanine and tryptophan using flow injection analysis (FIA) with chemiluminescence detection is described. Proline was the only amino acid to exhibit chemiluminescence with the tris(2,2-bipyridyl)ruthenium(III) reaction at pH 10. While, histidine was found to selectively enhance the reaction of luminol with Mn(II) salts in a basic medium. Acidic potassium permanganate chemiluminescence was able to selectively determine tyrosine at pH 6.75. Low pressure separations using a C18 guard column allowed the simultaneous determination of tyrosine and tryptophan or phenylalanine and tryptophan with acidic potassium permanganate and copper(II)-amino acid-hydrogen peroxide chemiluminescence, respectively. Precision for each method was less than 3.9% (R.S.D.) for five replicates of a standard (1×10⁻⁵ M) and the detection limits ranged between 4×10⁻⁹ and 7×10⁻⁶ M. Preliminary investigations revealed that the methodology developed was able to selectively determine the individual amino acids in an equimolar mixture of the 20 naturally occurring amino acids.     

Soluble manganese(IV) as a chemiluminescence reagent for the determination of opiate alkaloids, indoles and analytes of forensic interest

We present the results of our investigations into the use of soluble manganese(IV) as a chemiluminescence reagent, which include a significantly faster method of preparation and a study on the effect of formaldehyde and orthophosphoric acid concentration on signal intensity. Chemiluminescence detection was applied to the determination of 16 analytes, including opiate alkaloids, indoles and analytes of forensic interest, using flow injection analysis methodology. The soluble manganese(IV) reagent was less selective than either acidic potassium permanganate or tris(2,2′-bipyridyl)ruthenium(III) and therefore provided a more universal chemiluminescence detection system for HPLC. A broad spectral distribution with a maximum at 730 ± 5 nm was observed for the reaction between the soluble manganese(IV) and a range of analytes, as well as the background emission from the reaction with the formaldehyde enhancer. This spectral distribution matches that reported for chemiluminescence reactions with acidic potassium permanganate, where a manganese(II) emitting species was elucidated. This provides further evidence that the emission evoked in reactions with soluble manganese(IV) also emanates from a manganese(II) species, and not bimolecular singlet oxygen as suggested by previous authors.     

Flow-injection determination of thyroxine using immobilized enzyme with tris(2,2'-bipyridyl)ruthenium(III) chemiluminescence detection.

A flow-injection method is reported for the determination of thyroxine based on its enhancement effect on the tris(2,2'-bipyridyl)ruthenium(III) chemiluminescence reaction in the presence of NADH using immobilized alcohol dehydrogenase purified from baker yeast. The limit of detection (3 sigma blank) was 5.0 x 10(-8) M with a sample throughput of 80 h(-1). The calibration graph was linear over the range 0.5 - 10 x 10(-7) M (r2= 0.9988) with the relative standard deviation in the range 1.4 - 3.5% (n = 4). The effect of common excipients used in pharmaceutical preparations, some organic compounds and metal ions was studied. The method was applied to pharmaceutical thyroxine tablets, and the obtained results were not significantly different from the amount quoted.     

On-line chemical generation of tris(2,2'-bipyridyl)ruthenium(III) and its application in CE with chemiluminescence detection

A novel tris(2,2'-bipyridyl)ruthenium(III) [Ru(bipy)(3) (3+)]-based chemiluminescence (CL) detection in CE using an on-line chemical generation scheme has been demonstrated. Two continuous streams respectively containing solutions of Ru(bipy)(3) (2+) and acidic cerium(IV) used as a homogeneous chemical oxidant are employed to generate Ru(bipy)(3) (3+), which is delivered into the reaction capillary of a coaxial flow interface and then reacted with analytes at the end of the separation capillary to yield light. The important operational parameters for separation and detection are identified and optimized. Four alpha-ketocarboxylic acids used as models, outside of the amine-containing compounds, are successfully separated and detected to evaluate the feasibility of the approach. The excellent resolution and detection sensitivity was achieved by using 50 mmol/L phosphate running buffer (pH 9.5) with 0.7 mmol/L CTAB, and CL reagent solution streams containing 0.15 mmol/L Ru(bipy)(3) (2+) and 0.8 mmol/L cerium(IV) (0.25 mol/L H(2)SO(4)), respectively. The concentration detection limits for alpha-ketocarboxylic acids were below 3.7x10(-8) mol/L (S/N = 3). The proposed method was applied to the determination of alpha-ketocarboxylic acids in five different honey samples with satisfactory results.     

Pulse injection analysis with chemiluminescence detection: determination of citric acid using tris-(2,2'-bipyridine) ruthenium(II)

A chemiluminescence method for the determination of citric acid was developed. The method is based on the enhancement of citric acid on the chemiluminescence light emission of tris-(2,2'-bipyridine)ruthenium(II). In the presence of tris-(2,2'-bipyridine)ruthenium(II), upon the addition of Ce(IV), resulted in intense light emission. The emission intensity is greatly enhanced by the presence of citric acid. The linear range and detection limit of citric acid are 3.0x10(-8) approximately 6.0x10(-6) mol l(-1) and 3.0x10(-8) mol l(-1), respectively. The precision of the proposed method is determined by analyzing 11 samples containing 1.0x10(-7) mol l(-1) citric acid. The relative standard deviation is 3.0%. The enhanced mechanism of citric acid was studied. The method was evaluated by carrying out an interference study with common ions and compounds, by a recovery study and by analysis of human urine and orange juice. A satisfactory result was obtained.     

Development and validation of a liquid chromatographic method for the analysis of positron emission tomography radiopharmaceuticals with Ru(bpy)(3)(2+)-KMnO(4) chemiluminescence detection.

A sensitive, selective and rapid high-performance liquid chromatographic (HPLC) method with chemiluminescence (CL) detection was developed and validated for the analysis of positron emission tomography (PET) radiopharmaceuticals. This method is based on the CL reaction of PET compounds with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)(2+)] and acidic potassium permanganate [KMnO(4)]. After optimization of the reaction conditions, 12 of the 14 PET compounds investigated could be successfully detected and showed good performance in terms of sensitivity, linearity and reproducibility. In particular, for compounds with a tertiary amine functional group, the limits of detection were ppb levels for a 20 microL injection volume. Finally, this method was used to determine PET compounds for calculating of specific radioactivity in pharmaceutical samples.     

Turn On of a Ruthenium(II) Photocatalyst by DNA-Templated Ligation

Here, the synthesis of a Ru^II photocatalyst by light-directed oligonucleotide-templated ligation reaction is described. The photocatalyst was found to have tremendous potential for signal amplification with >15000 turnovers measured in 9 hours. A templated reaction was used to turn on the activity of this ruthenium(II) photocatalyst in response to a specific DNA sequence. The photocatalysis of the ruthenium(II) complex was harnessed to uncage a new precipitating dye that is highly fluorescent and photostable in the solid state. This reaction was used to discriminate between different DNA analytes based on localization of the precipitate as well as for in cellulo miRNA detection. Finally, a bipyridine ligand functionalized with two different peptide nucleic acid (PNA) sequences was shown to enable template-mediated ligation (turn on of the ruthenium(II) photocatalysis) and recruitment of substrate for templated photocatalysis.     

High performance liquid chromatography with immobilized Ru(bpy)_3~(2+)-KMnO_4 chemiluminescence detection and its application in metabolism of repaglinide in pig liver microsomes

A novel high performance liquid chromatography-chemiluminescence（HPLC-CL） method for investigation of in vitro metabolism of repaglinide in pig liver microsomes with microdialysis sampling technique was developed.The chromatographic separation was performed on a Hypersil BDS-C18 column with an isocratic mobile phase consisting of methanol and 0.01 mol/L KH₂PO₄（pH 3.0）（volume ratio 75:25） at a flow rate of 1.0 mL/min.The detection was based on the chemiluminescence reaction of repaglinide with acidic potassium permanganate（KMnO₄） and tris（2,2’-bipyridyl）ruthenium（Ⅲ）(Ru（bpy）₃³⁺),which was immobilized on the cationic ion-exchange resin for obtaining high sensitivity and reducing consumption of expensive reagent.     

Determination of sodium oxalate in Bayer liquor using flow-analysis incorporating an anion exchange column and tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection

Semi-automated flow injection instrumentation, incorporating a small anion exchange column coupled with tris(2,2′-bipyridyl)ruthenium(II) (Ru(bipy)₃²⁺) chemiluminescence detection, was configured and utilised to develop rapid methodology for the determination of sodium oxalate in Bayer liquors. The elimination of both negative and positive interferences from aluminium(III) and, as yet, unknown concomitant organic species, respectively are discussed. The robustness of the methodology was considerably enhanced by using the temporally stable form of the chemiluminescence reagent, tris(2,2′-bipyridyl)ruthenium(III) perchlorate in dry acetonitrile. Real Bayer process samples were analysed and the results obtained compared well with those performed using standard methods within industrial laboratories.     

Kinetic-spectrometric three-dimensional chemiluminescence as an effective analytical tool. Application to the determination of benzo(a)pyrene

Kinetic and spectroscopic methods were used in combination in this work to develop a new analytical tool for use in chemiluminescence detection processes. Specifically, time-resolved chemiluminescence was used jointly with a stopped-flow assembly in order to monitor the chemiluminescence produced in the oxidation of bis(2,4-dinitrophenyl)oxalate (DNPO) by hydrogen peroxide in the presence of a polycyclic aromatic hydrocarbon. Recording of successive two-dimensional spectra during the emission process and treating the acquired spectral data with dedicated software allows the obtainment of three-dimensional chemiluminescence spectra, a result of the joint use of two analytical techniques. Thus, using a flow cell specifically designed for direct coupling to the charge-coupled device (CCD) detector increases the emission intensity without the need for fibre optics. Also, using dedicated software to process the acquired two-dimensional spectra affords a comprehensive kinetic and spectroscopic characterization of the chemiluminescence signal via the three-dimensional spectrum previously obtained. The analytical potential of this new tool was assessed by application to the chemiluminescent reaction between a peroxyoxalate and an oxidant (hydrogen peroxide); the reaction is induced by benzo(a)pyrene, which was used to determine this polycyclic aromatic hydrocarbon in an organic solvent. A linear calibration graph was obtained between 0.5 and 20 mg L(-1). The limit of detection found to be 3.97 μg L(-1) and a relative standard error of 0.64% and a relative standard deviation of 1.87% were obtained. The results reached testify to the usefulness of the proposed analytical tool for simple determinations and its potential for the resolution of complex mixtures or determinations in complex matrices.