Indium-catalyzed coupling reaction between silyl enolates and alkyl chlorides or alkyl ethers

The coupling reactions of alkyl chlorides with silyl enolates catalyzed by InBr₃, and the coupling reactions of alkyl ethers with silyl enolates catalyzed by the combined Lewis acid of InBr₃/Me₃SiBr are described. In both reaction systems, various types of silyl enolates were used to give corresponding α-alkylated esters, ketones, carboxylic acids, amides, thioesters, and aldehydes.     

Catalytic,asymmetric Mannich-type reactions of N-acylimino esters: reactivity,diastereo- and enantioselectivity,and application to synthesis of N-acylated amino acid derivatives

In the presence of a catalytic amount of Cu(OTf)(2)-chiral diamine 3e complex, N-acylimino esters reacted with silyl enol ethers to afford the corresponding Mannich-type adducts in high yields with high enantioselectivities. A wide variety of silyl enol ethers derived from ketones, as well as esters and thioesters, reacted smoothly. In the reactions of alpha-substituted silyl enol ethers (alpha-methyl or benzyloxy), the desired syn-adducts were obtained in high yields with high diastereo- and enantioselectivities. Several intermediates for the synthesis of biologically important compounds were prepared using this novel catalytic asymmetric Mannich-type reaction, and at the same time, absolute and relative stereochemical assignments were made. In addition, it has been revealed that alkyl vinyl ethers reacted with N-acylimino esters in the presence of a catalytic amount of the Cu(II) catalyst to give the corresponding Mannich-type adducts in high yields with high enantioselectivities. This is the first example of catalytic asymmetric Mannich-type reactions with alkyl vinyl ethers. The reaction mechanism, structure of chiral catalyst-electrophile complexes, and transition states of these catalytic asymmetric reactions were assumed based on X-ray crystallographic analysis of the Cu(II)-chiral amine complex, PM3 calculations, and FT-IR analyses, etc. Finally, (1R,3R)-N-(3-hydroxy-1-hydroxymethyl-3-phenylpropyl)dodecanamide (HPA-12, 1), a new inhibitor of ceramide trafficking from endoplasmic reticulum to the site of sphingomyerin (SM) synthesis, has been synthesized efficiently using the present Mannich-type reaction as a key step. The synthesis involved three steps (two-pot), and total yield was 82.9%.     

A highly active palladium catalyst for intermolecular hydroamination. Factors that control reactivity and additions of functionalized anilines to dienes and vinylarenes

We report a catalyst for intermolecular hydroamination of vinylarenes that is substantially more active for this process than catalysts published previously. With this more reactive catalyst, we demonstrate that additions of amines to vinylarenes and dienes occur in the presence of potentially reactive functional groups, such as ketones with enolizable hydrogens, free alcohols, free carboxylic acids, free amides, nitriles, and esters. The catalyst for these reactions is generated from [Pd(eta(3)-allyl)Cl](2) (with or without added AgOTf) or [Pd(CH(3)CN)(4)](BF(4))(2) and Xantphos (9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene), which generates complexes with large P-Pd-P bite angles. Studies on the rate of the C-N bond-forming step that occurs by attack of amine on an eta(3)-phenethyl and an eta(3)-allyl complex were conducted to determine the effect of the bite angle on the rate of this nucleophilic attack. Studies on model eta(3)-benzyl complexes containing various bisphosphines showed that the nucleophilic attack was faster for complexes containing larger P-Pd-P bite angles. Studies of substituted unsymmetrical and unsubstituted symmetrical model eta(3)-allyl complexes showed that nucleophilic attack on complexes ligated by Xantphos was faster than on complexes bearing ligands with smaller bite angles and that nucleophilic attack on unsymmetrical allyl complexes with larger bite angle ligands was faster than on unsymmetrical allyl complexes with smaller bite angle ligands. However, monitoring of catalytic reactions of dienes by (31)P NMR spectroscopy showed that the concentration of active catalyst was the major factor that controlled rates for reactions of symmetrical dienes catalyzed by complexes of phosphines with smaller bite angles. The identity of the counterion also affected the rate of attack: reactions of allylpalladium complexes with chloride counterion occurred faster than reactions of allylpalladium complexes with triflate or tetrafluoroborate counterion. As is often observed, the dynamics of the allyl and benzyl complexes also depended on the identity of the counterion.     

Use of allysilanes as a new type of silylating agent for alcohols and carboxylic acids

A new convenient route to silyl ethers and esters from alcohols and carboxylic acids using allylsilanes in the presence of an acid catalyst in acetonitrile was developed. The present method is also applicable to t-butyldimethylsilylation.     

A highly convenient,efficient, and selective process for preparation of esters and amides from carboxylic acids using Fe(3+)-K-10 montmorillonite clay

In the presence of Fe(3+)-K-10 montmorillonite clay as a catalyst, aliphatic carboxylic acids selectively produced the corresponding esters in the presence of aromatic carboxylic acids by treatment with alcohols. Both the aliphatic and aromatic carboxylic acids formed the amides by reacting with the aliphatic amines, but only the aliphatic carboxylic acids yielded the anilides by treatment with aromatic amines. The catalyst is recoverable and recyclable.     

The ruthenium-catalyzed reduction and reductive N-alkylation of secondary amides with hydrosilanes: practical synthesis of secondary and tertiary amines by judicious choice of hydrosilanes

A triruthenium cluster, (mu3,eta2,eta3,eta5-acenaphthylene)Ru3(CO)7 (1) catalyzes the reaction of secondary amides with hydrosilanes, yielding a mixture of secondary amines, tertiary amines, and silyl enamines. Production of secondary amines with complete selectivity is achieved by the use of higher concentration of the catalyst (3 mol %) and the use of bifunctional hydrosilanes such as 1,1,3,3-tetramethyldisiloxane. Acidic workup of the reaction mixture affords the corresponding ammonium salts, which can be treated with a base, providing a facile method for isolation of secondary amines with high purity. In contrast, tertiary amines are formed with high selectivity by using lower concentration of the catalyst (1 mol %) and polymeric hydrosiloxanes (PMHS) as reducing agent. Reduction with PMHS encapsulates the ruthenium catalyst and organic byproducts to the insoluble silicone resin. The two reaction manifolds are applicable to various secondary amides and are practical in that the procedures provide the desired secondary or tertiary amine as a single product. The product contaminated with only minimal amounts of ruthenium and silicon residues. On the basis of the products and observed side products as well as NMR studies a mechanistic scenario for the reaction is also described.     

Deuteration of α,β-acetylenic esters, amides, or carboxylic acids without using deuterium gas: synthesis of 2,2,3,3-tetradeuterioesters, amides, or acids

An easy, simple, rapid, and nonhazardous deuteration of the C-C triple bond of α,β-acetylenic esters, amides, or acids by means of samarium diiodide in the presence of D₂O, provides an efficient method for synthesizing 2,2,3,3-tetradeuterioesters, amides, or carboxylic acids, respectively. When H₂O is used instead of D₂O, saturated carboxylic esters, amides, or acids were isolated. A mechanism to explain these reduction reactions has been proposed.     

Photoinduced Copper-Catalyzed Asymmetric Decarboxylative Alkynylation with Terminal Alkynes

We describe a photoinduced copper-catalyzed asymmetric radical decarboxylative alkynylation of bench-stable N-hydroxyphthalimide(NHP)-type esters of racemic alkyl carboxylic acids with terminal alkynes, which provides a flexible platform for the construction of chiral C(sp³)−C(sp) bonds. Critical to the success of this process are not only the use of the copper catalyst as a dual photo- and cross-coupling catalyst but also tuning of the NHP-type esters to inhibit the facile homodimerization of the alkyl radical and terminal alkyne, respectively. Owing to the use of stable and easily available NHP-type esters, the reaction features a broader substrate scope compared with reactions using the alkyl halide counterparts, covering (hetero)benzyl-, allyl-, and aminocarbonyl-substituted carboxylic acid derivatives, and (hetero)aryl and alkyl as well as silyl alkynes, thus providing a vital complementary approach to the previously reported method.     

Arsenorgano-Verbindungen. XX. Synthese und Reaktionsverhalten der Diphenylarsinocarbonsäuren

Organo-arsenic Compounds. XX. Synthesis and Reactivity of Diphenylarsino Carboxylic Acids Natrium diphenylarside reacts with chlorocarboxylic acids and their amides or esters in liquid ammonia to give the corresponding diphenylarsino carboxylic acids, amides, and esters. Their properties and some reactions are described. The synthesis of secondary ω-phenylarsino carboxylic acids from 2 and 3 has been studied.     

Iridium‐Catalyzed Enantioselective Allylic Substitution of Aliphatic Esters with Silyl Ketene Acetals as the Ester Enolates

Enantioselective allylic substitution with enolates derived from aliphatic esters under mild conditions remains challenging. Herein we report iridium‐catalyzed enantioselective allylation reactions of silyl ketene acetals, the silicon enolates of esters, to form products containing a quaternary carbon atom at the nucleophile moiety and a tertiary carbon atom at the electrophile moiety. Under relatively neutral conditions, the allylated aliphatic esters were obtained with excellent regioselectivity and enantioselectivity. These products were readily converted into primary alcohols, carboxylic acids, amides, isocyanates, and carbamates, as well as tetrahydrofuran and γ‐butyrolactone derivatives, without erosion of enantiomeric purity.     

Chemoselective conversion of α-unbranched aldehydes to amides, esters, and carboxylic acids by NHC-catalysis

Depending on the N-heterocyclic carbene catalyst utilized, α-unbranched aldehydes selectively provided amides, esters, or carboxylic acids through oxidation by NCS. The α-unbranched aldehyde underwent these reactions chemoselectively in the presence of an aromatic or α-branched aldehyde.     

Lewis base activation of Lewis acids: catalytic, enantioselective addition of silyl ketene acetals to aldehydes

The concept of Lewis base activation of Lewis acids has been reduced to practice for catalysis of the aldol reaction of silyl ketene acetals and silyl dienol ethers with aldehydes. The weakly acidic species, silicon tetrachloride (SiCl4), can be activated by binding of a strongly Lewis basic chiral phosphoramide, leading to in situ formation of a chiral Lewis acid. This species has proven to be a competent catalyst for the aldol addition of acetate-, propanoate-, and isobutyrate-derived silyl ketene acetals to conjugated and nonconjugated aldehydes. Furthermore, vinylogous aldol reactions of silyl dienol ethers are also demonstrated. The high levels of regio-, anti diastereo-, and enantioselectivity observed in these reactions can be rationalized through consideration of an open transition structure where steric interactions between the silyl cation complex and the approaching nucleophile are dominant.     

Iridium-Catalyzed Enantioselective Allylic Substitution of Aliphatic Esters with Silyl Ketene Acetals as the Ester Enolates

Enantioselective allylic substitution with enolates derived from aliphatic esters under mild conditions remains challenging. Herein we report iridium-catalyzed enantioselective allylation reactions of silyl ketene acetals, the silicon enolates of esters, to form products containing a quaternary carbon atom at the nucleophile moiety and a tertiary carbon atom at the electrophile moiety. Under relatively neutral conditions, the allylated aliphatic esters were obtained with excellent regioselectivity and enantioselectivity. These products were readily converted into primary alcohols, carboxylic acids, amides, isocyanates, and carbamates, as well as tetrahydrofuran and γ-butyrolactone derivatives, without erosion of enantiomeric purity.     

Two New Catalysts for the Dehydrogenative Coupling Reaction of Carboxylic Acids with Silanes—Convenient Methods for an Atom‐Economical Preparation of Silyl Esters

Tris(triphenylphosphine)cuprous chloride [Cu(PPh₃)₃Cl] has been found to be an efficient catalyst for the dehydrosilylation of carboxylic acids with silanes. In the presence of 4 mol% Cu(PPh₃)₃Cl, dehydrosilylation reactions in acetonitrile afforded the corresponding silyl esters at 80°C in good yields. It was noted that triphenylphosphine itself also functions as an adequate catalyst for the reaction.     

Photoinduced Copper‐Catalyzed Asymmetric Decarboxylative Alkynylation with Terminal Alkynes

We describe a photoinduced copper‐catalyzed asymmetric radical decarboxylative alkynylation of bench‐stable N‐hydroxyphthalimide(NHP)‐type esters of racemic alkyl carboxylic acids with terminal alkynes, which provides a flexible platform for the construction of chiral C(sp³)?C(sp) bonds. Critical to the success of this process are not only the use of the copper catalyst as a dual photo‐ and cross‐coupling catalyst but also tuning of the NHP‐type esters to inhibit the facile homodimerization of the alkyl radical and terminal alkyne, respectively. Owing to the use of stable and easily available NHP‐type esters, the reaction features a broader substrate scope compared with reactions using the alkyl halide counterparts, covering (hetero)benzyl‐, allyl‐, and aminocarbonyl‐substituted carboxylic acid derivatives, and (hetero)aryl and alkyl as well as silyl alkynes, thus providing a vital complementary approach to the previously reported method.     

Ruthenium-catalyzed regio- and stereoselective addition of carboxylic acids to aryl and trifluoromethyl group substituted unsymmetrical internal alkynes

The regio- and stereoselective addition of carboxylic acids to aryl and trifluoromethyl group substituted unsymmetrical internal alkynes has been accomplished: the Ru(3)(CO)(12)/3PPh(3) catalyst system has effectively catalyzed the reaction to afford the trifluoromethyl group substituted (E)-enol esters with high regio- and stereoselectivities.     

Two Reaction Mechanisms via Iminium Ion Intermediates: The Different Reactivities of Diphenylprolinol Silyl Ether and Trifluoromethyl‐Substituted Diarylprolinol Silyl Ether

The reactions of α,β‐unsaturated aldehydes with cyclopentadiene in the presence of diarylprolinol silyl ethers as catalyst proceed via iminium cations as intermediates, and can be divided into two types; one involving a Michael‐type reaction (type A) and one involving a cycloaddition (type B). Diphenylprolinol silyl ethers and trifluoromethyl‐substituted diarylprolinol silyl ethers, which are widely used proline‐type organocatalysts, have been investigated in this study. As the LUMO of the iminium ion derived from trifluoromethyl‐substituted diarylprolinol silyl ether is lower in energy than that derived from diphenylprolinol silyl ether, as supported by ab initio calculations, the trifluoromethyl‐substituted catalyst is more reactive in a type B reaction. The iminium ion from an α,β‐unsaturated aldehyde is generated more quickly with diphenylprolinol silyl ether than with the trifluoromethyl‐substituted diarylprolinol silyl ether. When the generation of the iminium ion is the rate‐determining step, the diphenylprolinol silyl ether catalyst is the more reactive. Because acid accelerates the generation of iminium ions and reduces the generation of anionic nucleophiles in the Michael‐type reaction (type A), it is necessary to select the appropriate acid for specific reactions. In general, diphenylprolinol silyl ether is a superior catalyst for type A reactions, whereas the trifluoromethyl‐substituted diarylprolinol silyl ether catalyst is preferred for type B reactions.     

Stereoselective tandem 1,4-addition reactions for benzenes: a comparison of Os(II), Re(I), and W(0) systems

The arene ligand in the complex TpRe(CO)(MeIm)(eta2-benzene) (Tp = hydridotris(pyrazolyl)borate; MeIm = N-methylimidazole) undergoes tandem electrophile/nucleophile 1,4-addition reactions. Subsequent oxidative demetalation affords cis-3,6-disubstituted 1,4-cyclohexadienes (46-84%). Common organic electrophiles such as acetals and Michael acceptors were successfully added to the bound benzene to generate eta3-benzenium complexes, which then were treated with a silyl ketene acetal, silyl vinyl ether, phenyllithium, or malonate ester to afford 1,4-dialkylated dihydrobenzene complexes. The d6 transition metal analogues TpW(NO)(PMe3)(eta2-benzene) and [Os(NH3)5(eta2-benzene)]2+ also undergo 1,4-dialkylation reactions, and the relative ability of all three metals to activate arenes is compared.     

Über halogen- und stickstoffhaltige Derivate aliphatischer Carbonsäuren, 7. Mitt.: Über Gewinnung und Reaktionen von α-Nitrocarbonsäureestern

Esters of α-bromo-α-methyl carboxylic acids are reacted with NaNO₂ in water/alcohol to give esters of the corresponding α-nitro carboxylic acid. Some of these nitro esters can be characterized as amides. Activating groups (benzyl or acetyl group) decrease the stability of such tertiary α-nitro esters and give consecutive reactions.     

Lanthanide triflate-promoted palladium-catalyzed cyclization of alkenyl beta-keto esters and amides

[reaction: see text] Lanthanide triflates were found to promote the palladium-catalyzed cyclization of alkenyl beta-keto esters and amides. In the presence of catalytic amounts of PdCl(2)(MeCN)(2) and Ln(OTf)(3), various alkenyl beta-keto esters and amides underwent regioselective cyclization reactions to give six-, seven-, or eight-membered-ring carbocycles in moderate to excellent yields.