Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIBF₄) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature X by polynomial equations, C _P,m (J K^–1 mol^–1)= 195.55+47.230 X–3.1533 X ²+4.0733 X ³+3.9126 X ⁴ [X=(T–125.5)/45.5] for the solid phase (80~171 K), and C _P,m (J K^–1 mol^–1)= 378.62+43.929 X+16.456 X ²–4.6684 X ³–5.5876 X ⁴ [X=(T–285.5)/104.5] for the liquid phase (181~390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BMIBF₄ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass translation of BMIBF₄ was observed at 176.24 K. Using oxygen-bomb combustion calorimeter, the molar enthalpy of combustion of BMIBF₄ was determined to be Δ_c H _m ^o= – 5335±17 kJ mol^–1. The standard molar enthalpy of formation of BMIBF₄ was evaluated to be Δ_f H _m ^o= –1221.8±4.0 kJ mol^–1 at T=298.150±0.001 K.     

Low-temperature heat capacities and thermodynamic properties of 2,2-dimethyl-1,3-propanediol

The molar heat capacities C _p,m of 2,2-dimethyl-1,3-propanediol were measured in the temperature range from 78 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-solid and a solid-liquid phase transitions were found at T-314.304 and 402.402 K, respectively, from the experimental C _p-T curve. The molar enthalpies and entropies of these transitions were determined to be 14.78 kJ mol⁻¹, 47.01 J K⁻¹ mol⁻ for the solid-solid transition and 7.518 kJ mol⁻¹, 18.68 J K⁻¹ mol⁻¹ for the solid-liquid transition, respectively. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 310 K, C _p,m/(J K⁻¹ mol⁻¹)=117.72+58.8022x+3.0964x ²+6.87363x ³−13.922x ⁴+9.8889x ⁵+16.195x ⁶; x=[(T/K)−195]/115. In the temperature range of 325 to 395 K, C _p,m/(J K⁻¹ mol⁻¹)=290.74+22.767x−0.6247x ²−0.8716x ³−4.0159x ⁴−0.2878x ⁵+1.7244x ⁶; x=[(T/K)−360]/35. The thermodynamic functions H _T−H _298.15 and S _T−S _298.15, were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The thermostability of the compound was further tested by DSC and TG measurements. The results were in agreement with those obtained by adiabatic calorimetry.     

Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluoroborate (BMIPF₆) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature (X) by polynomial equations, C _P,m (J K⁻¹ mol⁻¹) = 204.75 + 81.421X − 23.828 X ² + 12.044X ³ + 2.5442X ⁴ [X = (T − 132.5)/52.5] for the solid phase (80–185 K), C _P,m (J K⁻¹ mol⁻¹) = 368.99 + 2.4199X + 1.0027X ² + 0.43395X ³ [X = (T − 230)/35] for the glass state (195 − 265 K), and C _P,m (J K⁻¹ mol⁻¹) = 415.01 + 21.992X − 0.24656X ² + 0.57770X ³ [X = (T − 337.5)/52.5] for the liquid phase (285–390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BMIPF₆ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass transition of BMIPF₆ was measured to be 190.41 K, the enthalpy and entropy of the glass transition were determined to be ΔH _g = 2.853 kJ mol⁻¹ and ΔS _g = 14.98 J K⁻¹ mol⁻¹, respectively. The results showed that the milting point of the BMIPF₆ is 281.83 K, the enthalpy and entropy of phase transition were calculated to be ΔH _m = 20.67 kJ mol⁻¹ and ΔS _m = 73.34 J K⁻¹ mol⁻¹.     

Thermodynamic investigation of several natural polyols

The low-temperature heat capacity C _p,m of erythritol (C₄H₁₀O₄, CAS 149-32-6) was precisely measured in the temperature range from 80 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=390.254 K from the experimental C _p-T curve. The molar enthalpy and entropy of this transition were determined to be 37.92±0.19 kJ mol⁻¹ and 97.17±0.49 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S _298.15], were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined: Δ_c H _m⁰(C₄H₁₀O₄, cr)= −2102.90±1.56 kJ mol⁻¹ and Δ_f H _m⁰(C₄H₁₀O₄, cr)= − 900.29±0.84 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

Molar heat capacity and thermodynamic properties of 1,2-cyclohexane dicarboxylic anhydride [C8H10O3]

The molar heat capacity C _p,m of 1,2-cyclohexane dicarboxylic anhydride was measured in the temperature range from T=80 to 390 K with a small sample automated adiabatic calorimeter. The melting point T _m, the molar enthalpy Δ_fus H _m and the entropy Δ_fus S _m of fusion for the compound were determined to be 303.80 K, 14.71 kJ mol⁻¹ and 48.43 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _273.15] and [S _T-S _273.15] were derived in the temperature range from T=80 to 385 K with temperature interval of 5 K. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetry (TG), when the process of the mass-loss was due to the evaporation, instead of its thermal decomposition.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Thermodynamic properties of strontium metaniobate SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

The heat capacity and the enthalpy increments of strontium metaniobate SrNb₂O₆ were measured by the relaxation method (2-276 K), micro DSC calorimetry (260-320 K) and drop calorimetry (723-1472 K). Temperature dependence of the molar heat capacity in the form C _pm=(200.47±5.51)+(0.02937±0.0760)T-(3.4728±0.3115)·10⁶/T ² J K⁻¹ mol⁻¹ (298-1500 K) was derived by the least-squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m⁰ (298.15 K)=173.88±0.39 J K⁻¹ mol⁻¹ was evaluated from the low temperature heat capacity measurements. The standard enthalpy of formation Δ_f H ⁰ (298.15 K)=-2826.78 kJ mol⁻¹ was derived from total energies obtained by full potential LAPW electronic structure calculations within density functional theory.     

Study on the thermodynamic properties of cholesterol

The standard molar enthalpy of combustion of cholesterol was measured at constant volume. According to value of Δ_r U _m^θ(−14358.4±20.65 kJ mol⁻¹), Δ_r H _m^θ(−14385.7 kJ mol⁻¹) of combustion reaction and Δ_f H _m^θ(2812.9 kJ mol⁻¹) of cholesterol were obtained from the reaction equation. The enthalpy of combustion reaction of cholesterol was also estimated by the average bond enthalpies. By design of a thermo-chemical recycle, the enthalpy of combustion of cholesterol were calculated between 283.15∼373.15 K. Besides, molar enthalpy and entropy of fusion of cholesterol was obtained by DSC technique.     

Preparation and characterization of anion-cation surfactants modified montmorillonite

The low-temperature molar heat capacities of CoPc and CoTMPP were measured by temperature modulated differential scanning calorimetry (TMDSC) over the temperature range from 223 to 413 K for the first time. No phase transition or thermal anomaly was observed in the experimental temperature range for CoPc. However, a structural change was found to be nonreversible for CoTMPP in the temperature range of 368–403 K, which was further validated by the results of IR and XRD. The molar enthalpy ΔH _m and entropy ΔS _m of phase transition of the CoTMPP were determined to be 3.301 kJ mol⁻¹ and 8.596 J K⁻¹ mol⁻¹, respectively. The thermodynamic parameters of CoPc and CoTMPP such as entropy and enthalpy relative to reference temperature 298.15 K were derived based on the above molar heat capacity data. Moreover, the thermal stability of these two compounds was further investigated through TG measurements. Three steps of mass loss were observed in the TG curve for CoPc and five steps for CoTMPP.     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic Properties of Hydrofullerene C60H36 from 5 to 340 K

The temperature dependence of the molar heat capacity (C⁰ _p) of hydrofullerene C₆₀H₃₆ between 5 and 340 K was determined by adiabatic vacuum calorimetry with an error of about 0.2%. The experimental data were used for the calculation of the thermodynamic functions of the compound in the range 0 to340 K. It was found that at T=298.15 K and p=101.325 kPa C⁰ _p (298.15)=690.0 J K⁻¹ mol⁻¹,H^o(298.15)−H^o(0)= 84.94 kJ mol⁻¹,S^o(298.15)=506.8 J K⁻¹ mol⁻¹, G^o(298.15)−H^o(0)= −66.17 kJ mol⁻¹. The standard entropy of formation of hydrofullerene C₆₀H₃₆ and the entropy of reaction of its formation by hydrogenation of fullerene C₆₀ with hydrogen were estimated and at T=298.15 K they were Δ_fS^o= −2188.4 J K⁻¹ mol⁻¹ and Δ_rS^o= −2270.5 J K⁻¹mol⁻¹, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic investigation of several natural polyols (II)

The low-temperature heat capacity C _p,m of sorbitol was precisely measured in the temperature range from 80 to 390 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=369.157 K from the experimental C _p-T curve. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 355 K, C _p,m/J K⁻¹ mol⁻¹=170.17+157.75x+128.03x ²-146.44x ³-335.66x ⁴+177.71x ⁵+306.15x ⁶, x= [(T/K)−217.5]/137.5. In the temperature range of 375 to 390 K, C _p,m/J K⁻¹ mol⁻¹=518.13+3.2819x, x=[(T/K)-382.5]/7.5. The molar enthalpy and entropy of this transition were determined to be 30.35±0.15 kJ mol⁻¹ and 82.22±0.41 J K⁻¹ mol⁻¹ respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S 298.15], were derived from the heat capacity data in the temperature range of 80 to 390 K with an interval of 5 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

Thermochemical study of the solid complex Ho(PDC)3 (o-phen)

A novel solid complex, formulated as Ho(PDC)₃ (o-phen), has been obtained from the reaction of hydrate holmium chloride, ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen·H₂O) in absolute ethanol, which was characterized by elemental analysis, TG-DTG and IR spectrum. The enthalpy change of the reaction of complex formation from a solution of the reagents, Δ_rH_m^θ (sol), and the molar heat capacity of the complex, c_m, were determined as being –19.161±0.051 kJ mol^–1 and 79.264±1.218 J mol^–1 K^–1 at 298.15 K by using an RD-496 III heat conduction microcalorimeter. The enthalpy change of complex formation from the reaction of the reagents in the solid phase, Δ_rH_m^θ(s), was calculated as being (23.981±0.339) kJ mol^–1 on the basis of an appropriate thermochemical cycle and other auxiliary thermodynamic data. The thermodynamics of reaction of formation of the complex was investigated by the reaction in solution at the temperature range of 292.15–301.15 K. The constant-volume combustion energy of the complex, Δ_cU, was determined as being –16788.46±7.74 kJ mol^–1 by an RBC-II type rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH_m^θ, and standard enthalpy of formation, Δ_fH_m^θ, were calculated to be –16803.95±7.74 and –1115.42±8.94 kJ mol^–1, respectively.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Polymorphism of paracetamol

The thermodynamic relationship between crystal modifications of paracetamol was studied by alternative methods. Temperature dependence of saturated vapor pressure for polymorphic modifications of the drug paracetamol (acetaminophen) was mea sured and thermodynamic functions of the sublimation process calculated. Solution calorimetry was carried out for the two modifications in the same solvent. Thermodynamic parameters for sublimation for form I (monoclinic) were found: ΔG _sub²⁹⁸=60.0 kJ mol⁻¹; ΔH _sub²⁹⁸=117.9±0.7 kJ mol⁻¹; ΔS _sub²⁹⁸=190±2 J mol⁻¹ K⁻¹. For the orthorhombic modification (form II), the saturated vapor pressure could only be studied at 391 K. Phase transition enthalpy at 298 K, ΔH _tr²⁹⁸(I→II)=2.0±0.4 kJ mol⁻¹, was derived as the difference between the solution enthalpies of the noted polymorphs in the same solution (methanol). Based on ΔH _tr²⁹⁸ (I→II), differences between temperature dependencies of heat capacities of both modifications and the vapor pressure value of form II at 391 K, the temperature dependence of saturated vapor pressure and thermodynamic sublimation parameters for modification II were also estimated (ΔG _sub²⁹⁸=56.1 kJ mol⁻¹; ΔH _sub²⁹⁸=115.9±0.9 kJ mol⁻¹; ΔS _sub²⁹⁸=200±3 J mol⁻¹ K⁻¹). The results indicate that the modifications are monotropically related, which is in contrast to findings recently reported found by classical thermochemical methods.     

Phase transitions of K<Subscript>2</Subscript>TaF<Subscript>7</Subscript> within 680–800°C

Three thermal effects on heating/cooling of K₂TaF₇ in the temperature interval of 680–800°C were investigated by the DSC method. The values determined for the enthalpy change of the individual processes are: Δ_transIIH_m(K₂TaF₇; 703°C) = 1.7(2) kJ mol⁻¹, Δ_transIH_m(K₂TaF₇; 746°C) = 19(1) kJ mol⁻¹ and Δ_transIIIH_m(K₂TaF₇; 771°C) = 13(1) kJ mol⁻¹. The first thermal effect was attributed to a solid-solid phase transition; the second to the incongruent melting of K₂TaF₇ and the third to mixing of two liquids. These findings are supported by in situ neutron powder diffraction experiments performed in the temperature interval of 654–794°C.      

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Heat Capacities and Thermodynamic Properties of a H2O + Li2B4O7 Solution in the Temperature Range from 80 to 356 K

The molar heat capacities of an aqueous Li₂B₄O₇ solution were measured with a precision automated adiabatic calorimeter in the temperature range from 80 to 356 K at a concentration of 0.3492 mol⋅kg⁻¹. The occurrence of a phase transition was determined based on the changes in the curve of the heat capacity with temperature. A phase transition was observed at 271.72 K corresponding to the solid-liquid phase transition; the enthalpy and entropy of the phase transition were evaluated to be Δ H _m = 4.110 kJ⋅mol⁻¹ and Δ S _m = 15.13 J⋅K⁻¹⋅mol⁻¹, respectively. Using polynomial equations and thermodynamic relationship, the thermodynamic functions [H _T −H _298.15] and [S _T −S _298.15] of the aqueous Li₂B₄O₇ solution relative to 298.15 K were calculated in temperature range 80 to 355 K at intervals of 5 K. Values of the relative apparent molar heat capacities of the aqueous Li₂B₄O₇ solution, C _p,φ, were calculated at every 5 K in temperature range from 80 to 355 K from the experimental heat capacities of the solution and the heat capacities of pure water.     

Heat capacities and thermodynamic properties of 2-benzoylpyridine (C12H9NO)

The heat capacities of 2-benzoylpyridine were measured with an automated adiabatic calorimeter over the temperature range from 80 to 340 K. The melting point, molar enthalpy, Δ_fusH^m, and entropy, Δ_fusS^m, of fusion of this compound were determined to be 316.49±0.04 K, 20.91±0.03 kJ mol^–1 and 66.07±0.05 J mol^–1 K^–1, respectively. The purity of the compound was calculated to be 99.60 mol% by using the fractional melting technique. The thermodynamic functions (H_T–H_298.15) and (S_T–S_298.15) were calculated based on the heat capacity measurements in the temperature range of 80–340 K with an interval of 5 K. The thermal properties of the compound were further investigated by differential scanning calorimetry (DSC). From the DSC curve, the temperature corresponding to the maximum evaporation rate, the molar enthalpy and entropy of evaporation were determined to be 556.3±0.1 K, 51.3±0.2 kJ mol^–1 and 92.2±0.4 J K^–1 mol^–1, respectively, under the experimental conditions.     

Thermochemistry of copper complex of 6-benzylaminopurine

The copper(II) complex of 6-benzylaminopurine (6-BAP) has been prepared with dihydrated cupric chloride and 6-benzylaminopurine. Infrared spectrum and thermal stabilities of the solid complex have been discussed. The constant-volume combustion energy, Δ_c U, has been determined as −12566.92±6.44 kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. From the results and other auxiliary quantities, the standard molar enthalpy of combustion, Δ_c H _m ^θ, and the standard molar of formation of the complex, Δ_f H _m ^θ, were calculated as −12558.24±6.44 and −842.50±6.47 kJ mol⁻¹, respectively.