Synthesis, characterization and SERS activity of Au-Ag nanorods

The formation mechanism and morphology of Au-Ag bimetallic colloidal nanoparticles depend on the composition. Ag coated Au colloidal nanoparticles have been prepared by deposition of Ag through chemical reduction on performed Au colloid. The composition of the Au(100-x)-Ag(x) particles was varied from x=0 to 50. The obtained colloids were characterized by UV-vis spectroscopy and transmission electron microscopy (TEM). The Au(80)-Ag(20) colloid consists of alloy nanorods with dimension of 25nmx100nm. The activity of these nanorods in surface enhanced Raman spectroscopy (SERS) was checked by using sodium salicylate as an adsorbate probe. Intense SERS bands are observed indicating its usefulness as a SERS substrate in near infrared (NIR) laser excitation.     

Magnetic Nanohybrids Loaded with Bimetal Core–Shell–Shell Nanorods for Bacteria Capture,Separation, and Near‐Infrared Photothermal Treatment

A novel antimicrobial nanohybrid based on near‐infrared (NIR) photothermal conversion is designed for bacteria capture, separation, and sterilization (killing). Positively charged magnetic reduced graphene oxide with modification by polyethylenimine (rGO–Fe₃O₄–PEI) is prepared and then loaded with core–shell–shell Au–Ag–Au nanorods to construct the nanohybrid rGO–Fe₃O₄–Au–Ag–Au. NIR laser irradiation melts the outer Au shell and exposes the inner Ag shell, which facilitates controlled release of the silver shell. The nanohybrids combine physical photothermal sterilization as a result of the outer Au shell with the antibacterial effect of the inner Ag shell. In addition, the nanohybrid exhibits high heat conductivity because of the rGO and rapid magnetic‐separation capability that is attributable to Fe₃O₄. The nanohybrid provides a significant improvement of bactericidal efficiency with respect to bare Au–Ag–Au nanorods and facilitates the isolation of bacteria from sample matrixes. A concentration of 25 μg mL^?1 of nanohybrid causes 100 % capture and separation of Escherichia coli O157:H7 (1×10⁸ cfu mL^?1) from an aqueous medium in 10 min. In addition, it causes a 22 °C temperature rise for the surrounding solution under NIR irradiation (785 nm, 50 mW cm^?2) for 10 min. With magnetic separation, 30 μg mL^?1 of nanohybrid results in a 100 % killing rate for E. coli O157:H7 cells. The facile bacteria separation and photothermal sterilization is potentially feasible for environmental and/or clinical treatment.     

Rapid synthesis of highly monodisperse Au(x)Ag(1-x) alloy nanoparticles via a half-seeding approach

Gold-silver alloy Au(x)Ag(1-x) is an important class of functional materials promising new applications across a wide array of technological fields. In this paper, we report a fast and facile synthetic protocol for preparation of highly monodisperse Au(x)Ag(1-x) alloy nanoparticles in the size range of 3-6 nm. The precursors employed in this work are M(I)-alkanethiolates (M = Au and Ag), which can be easily prepared by mixing common chemicals such as HAuCl(4) or AgNO(3) with alkanethiols at room temperature. In this half-seeding approach, one of the M(I)-alkanethiolates is first heated and reduced in oleylamine solvent, and freshly formed metal clusters will then act as premature seeds on which both the first and second metals (from M(I)-alkanethiolates, M = Au and Ag) can grow accordingly without additional nucleation and thus achieve high monodispersity for product alloy nanoparticles. Unlike in other prevailing methods, both Au and Ag elements present in these solid precursors are in the same monovalent state and have identical supramolecular structures, which may lead to a more homogeneous reduction and complete interdiffusion at elevated reaction temperatures. When the M(I)-alkanethiolates are reduced to metallic forms, the detached alkanethiolate ligands will serve as capping agent to control the growth. More importantly, composition, particle size, and optical properties of Au(x)Ag(1-x) alloy nanoparticles can be conveniently tuned with this approach. The optical limiting properties of the prepared particles have also been investigated at 532 and 1064 nm using 7 ns laser pulses, which reveals that the as-prepared alloy nanoparticles exhibit outstanding broadband optical limiting properties with low thresholds.     

Mechanistic studies on the galvanic replacement reaction between multiply twinned particles of Ag and HAuCl4 in an organic medium

This article presents a mechanistic study on the galvanic replacement reaction between 11- and 14-nm multiply twinned particles (MTPs) of Ag and HAuCl4 in chloroform. We monitored both morphological and spectral changes as the molar ratio of HAuCl4 to Ag was increased. The details of reaction were different from previous observations on single-crystal Ag nanocubes and cuboctahedrons. Because Au and Ag form alloys rapidly within small MTPs rich in vacancy and grain boundary defects, a complete Au shell did not form on the surface of each individual Ag template. Instead, the replacement reaction resulted in the formation of alloy nanorings and nanocages from Ag MTPs of decahedral or icosahedral shape. For the nanorings and nanocages derived from 11-nm Ag MTPs, the surface plasmon resonance (SPR) peak can be continuously shifted from 400 to 616 nm. When the size of Ag MTPs was increased to 14 nm, the SPR peak can be further shifted to 740 nm, a wavelength sought by biomedical applications. We have also investigated the effects of capping ligands and AgCl precipitate on the replacement reaction. While hollow structures were routinely generated from oleylamine-capped Ag MTPs, we obtained very few hollow structures by using a stronger capping ligand such as oleic acid or tri-n-octylphosphine oxide (TOPO). Addition of extra oleylamine was found to be critical to the formation of well-controlled, uniform hollow structures free of AgCl contamination thanks to the formation of a soluble complex between AgCl and oleylamine.     

Morphological Evolution of Single-Crystal Ag Nanospheres during the Galvanic Replacement Reaction with HAuCl(4)

This paper presents a systematic study of the galvanic replacement reaction between 23.5 nm single-crystal Ag nanospheres and HAuCl(4) in an aqueous medium. We have monitored both morphological and spectral changes as the molar ratio of HAuCl(4) to Ag is increased. The replacement reaction on single-crystal Ag nanospheres results in the formation of a series of hollow and porous nanostructures composed of Au-Ag alloys. By varying the molar ratio of HAuCl(4) to Ag, we are able to control the size and density of the pores. In addition, the localized surface plasmon resonance peaks of these nanostructures can be readily tuned from 408 to 791 nm as the product becomes increasingly more hollow and porous.     

Cancer cell imaging and photothermal therapy in the near-infrared region by using gold nanorods

Due to strong electric fields at the surface, the absorption and scattering of electromagnetic radiation by noble metal nanoparticles are strongly enhanced. These unique properties provide the potential of designing novel optically active reagents for simultaneous molecular imaging and photothermal cancer therapy. It is desirable to use agents that are active in the near-infrared (NIR) region of the radiation spectrum to minimize the light extinction by intrinsic chromophores in native tissue. Gold nanorods with suitable aspect ratios (length divided by width) can absorb and scatter strongly in the NIR region (650-900 nm). In the present work, we provide an in vitro demonstration of gold nanorods as novel contrast agents for both molecular imaging and photothermal cancer therapy. Nanorods are synthesized and conjugated to anti-epidermal growth factor receptor (anti-EGFR) monoclonal antibodies and incubated in cell cultures with a nonmalignant epithelial cell line (HaCat) and two malignant oral epithelial cell lines (HOC 313 clone 8 and HSC 3). The anti-EGFR antibody-conjugated nanorods bind specifically to the surface of the malignant-type cells with a much higher affinity due to the overexpressed EGFR on the cytoplasmic membrane of the malignant cells. As a result of the strongly scattered red light from gold nanorods in dark field, observed using a laboratory microscope, the malignant cells are clearly visualized and diagnosed from the nonmalignant cells. It is found that, after exposure to continuous red laser at 800 nm, malignant cells require about half the laser energy to be photothermally destroyed than the nonmalignant cells. Thus, both efficient cancer cell diagnostics and selective photothermal therapy are realized at the same time.     

Surface Plasmon Resonance‐Enhanced Visible‐NIR‐Driven Photocatalytic and Photothermal Catalytic Performance by Ag/Mesoporous Black TiO2 Nanotube Heterojunctions

Ag/mesoporous black TiO₂ nanotubes heterojunctions (Ag‐MBTHs) were fabricated through a surface hydrogenation, wet‐impregnation and photoreduction strategy. The as‐prepared Ag‐MBTHs possess a relatively high specific surface area of ≈85 m² g^?1 and an average pore size of ≈13.2 nm. The Ag‐MBTHs with a narrow band gap of ≈2.63 eV extend the photoresponse from UV to the visible‐light and near‐infrared (NIR) region. They exhibit excellent visible‐NIR‐driven photothermal catalytic and photocatalytic performance for complete conversion of nitro aromatic compounds (100 %) and mineralization of highly toxic phenol (100 %). The enhancement can be attributed to the mesoporous hollow structures increasing the light multi‐refraction, the Ti³⁺ in frameworks and the surface plasmon resonance (SPR) effect of plasmonic Ag nanoparticles favoring light‐harvesting and spatial separation of photogenerated electron–hole pairs, which is confirmed by transient fluorescence. The fabrication of this SPR‐enhanced visible‐NIR‐driven Ag‐MBTHs catalyst may provide new insights for designing other high‐performance heterojunctions as photocatalytic and photothermal catalytic nanomaterials.     

Spindle‐Like Polypyrrole Hollow Nanocapsules as Multifunctional Platforms for Highly Effective Chemo–Photothermal Combination Therapy of Cancer Cells in Vivo

The monodispersed spindle‐like polypyrrole hollow nanocapsules (PPy HNCs) as the multifunctional platforms for combining chemotherapy with photothermal therapy for cancer cells are reported. Whereas the hollow cavity of nanocapsules can be used to load the anticancer drug (i.e., doxorubicin) for chemotherapy, the PPy shells can convert NIR light into heat for photothermal therapy. The release of the drug from the spindle‐like PPy HNCs is pH‐sensitive and near‐infrared (NIR) light‐enhanced. More importantly, the spindle‐like PPy HNCs can penetrate cells more rapidly and efficiently in comparison with the spherical PPy HNCs. Both in vitro and in vivo experiments demonstrated that the combination of DOX‐loaded spindle‐like PPy HNCs and NIR light provide a highly effective and feasible chemo‐photothermal therapy cancer method with a synergistic effect. Owing to their high photothermal conversion efficiency, large hollow cavity, and good biocompatibility, the spindle‐like PPy HNCs could be used as a promising new cancer drug‐nanocarrier and photothermal agent for localized tumorous chemo‐photothermal therapy.     

Selective dissolution of the silver component in colloidal Au and Ag multilayers: a facile way to prepare nanoporous gold film materials

Colloidal Au/Ag multilayer films were prepared by alternate assembly of Au nanoparticles with a size of 5 +/- 1.2 nm and Ag nanoparticles with a size of 10 +/- 2.4 nm by using 1,5-pentanedithiol as cross-linker. Nanoporous gold films with a ligament size of 26.7 +/- 4.6 nm were then prepared by selective dissolution of sacrificial templates of silver particles in colloidal Au/Ag multilayers. The complete dissolution of Ag particles in colloidal Au/Ag multilayers in a mixture solution of 3.0 mM HAuCl(4) and 3 M NaCl took place at room temperature without damage of the colloidal Au film. This method to prepare nanoporous gold films was further extended to the preparation of nanoporous gold nanotubes by depositing colloidal Au/Ag film on the inner wall of anodic aluminum oxides (AAO) followed by dissolution of colloidal Ag and removal of AAO templates.     

Ultrafast spectroscopy and coherent acoustic phonons of Au-Ag core-shell nanorods

We performed the first investigations of coherent acoustic phonons in Au-Ag core-shell nanorods, which were compared with the results of parental Au nanorods. Both breathing and extensional modes were observed in Au-Ag core-shell nanorods with ~11 nm Ag shell while only extensional modes were detected in other core-shell nanorods with 4-7 nm Ag shell. Young's modulus estimated from the oscillation period of extensional modes was found to be larger for Au-Ag core-shell nanorods with ~4 nm Ag shell, as compared with that of Au nanorods. The value of Young's modulus decreases with the increase of the Ag shell thickness and finally becomes smaller than that of Au nanorods. This phenomenon is interpreted in terms of the surface effects and the existence of grain boundaries in the lattice structure of Ag shell.     

Hybrid CuO-TiO(2-x)N(x) hollow nanocubes for photocatalytic conversion of CO2 into methane under solar irradiation

Methane-producing hollow nanocubes: Hybrid CuO-TiO(2-x)N(x) hollow nanocubes have been synthesized by first depositing TiO(2) onto Cu(3)N nanocube templates, then heating in air to oxidize the Cu(3)N to CuO while concomitantly incorporating nitrogen into the TiO(2). The nanostructured CuO-TiO(2-x)N(x) material photocatalytically converts CO(2) into methane under solar irradiation.     

Metallophilic interactions in closed-shell d10 metal-metal dicyanide bonded luminescent systems Eu[Ag(x)Au(1-x)(CN)2]3 and their tunability for excited state energy transfer

We report on the heterobimetallic system, Eu[Ag(x)Au(1-x)(CN)(2)](3) (x = 0-1) in which sensitization of europium luminescence occurs by energy transfer from [Ag(x)Au(1-x)(CN)(2)](-) donor excited states. The donor states have energies which are tunable and dependent on the Ag/Au stoichiometric ratio. These layered systems exhibit interesting properties, one of which is their emission energy tunability when excited at different excitation wavelengths. In this paper, we report on their use as donor systems with Eu(III) ions as acceptor ions in energy transfer studies. Luminescence results show that the mixed metal dicyanides with the higher silver loading have a better energy transfer efficiency than the pure Ag(CN)(2)(-) and Au(CN)(2)(-) donors. The better energy transfer efficiency is due to the greater overlap between the donor emission and acceptor excitation. Additionally, more acceptor states are available in the high silver loading mixed metal Eu(III) complexes. The results from a crystal structure determination and Raman experiments are also presented in this paper and provide information about metallophilic interactions in the closed-shell d(10) metal-metal [Ag(x)Au(1-x)(CN(2)](-) dicyanide clusters.     

Observation of a mixed-metal transition in heterobimetallic Au/Ag dicyanide systems

Crystals of the mixed-metal heterobimetallic Au/Ag dicyanide complex, K[AuxAg1-x(CN)2] (x = 0-->1), were obtained by slow evaporation. The mixed-metal complex K[Au0.44Ag0.56(CN)2] crystallizes in a rhombohedral crystal system, space group R. The crystal structure consists of layers of linear chains of Au(CN)2- and Ag(CN)2- ions and K+ ions that connect the layers through the N atoms. The excitation and emission spectra of single crystals of K[AuxAg1-x(CN)2] were recorded at 4.2-180 K using excitation wavelengths between 230 and 260 nm. Two emission bands due to Ag-Au interactions were observed at 343 and 372 nm. Lifetime measurements indicate the shorter-wavelength emission corresponds to fluorescence and the longer-wavelength band is phosphorescence. These new emission bands are not seen in the pure K[Ag(CN)2] or pure K[Au(CN)2] crystals. Extended Hückel calculations show that the LUMO of the mixed-metal system is bonding while the HOMO is antibonding or very weakly bonding. Moreover, excited-state extended Hückel calculations indicate the formation of exciplexes with shorter metal-metal distances and higher metal-metal overlap populations than the corresponding ground-state oligomers. The luminescence is assigned to a mixed-metal transition from a molecular orbital with Au character to a molecular orbital with Ag character.     

One‐Dimensional Fe2P Acts as a Fenton Agent in Response to NIR II Light and Ultrasound for Deep Tumor Synergetic Theranostics

The stringent reaction conditions for an effective Fenton reaction (pH range of 3–4) hinders its application in cancer therapy. Therefore, how to improve the efficiency of the Fenton reaction in a tumor site has been the main obstacle in chemodynamic therapy (CDT). Herein, we report biocompatible one‐dimensional (1D) ferrous phosphide nanorods (FP NRs) with ultrasound (US)‐ and photothermal (PT)‐enhanced Fenton properties and excellent photothermal conversion efficiency (56.6 %) in the NIR II window, showing synergistic therapeutic properties. Additionally, the high photothermal conversion efficiency and excellent traverse relaxivity (277.79 mm ^?1 s^?1) of the FP NRs means they are excellent photoacoustic imaging (PAI) and magnetic resonance imaging (MRI) agents. This is the first report on exploiting the response of metallic phosphides to NIR II laser (1064 nm) and ultrasound to improve the CDT effect with a high therapeutic effect and PA/MR imaging.     

Preparation of poly(ethylene glycol)-modified poly(amido amine) dendrimers encapsulating gold nanoparticles and their heat-generating ability

Loading of HAuCl4 in poly(amido amine) G4 dendrimers having poly(ethylene glycol) (PEG) grafts at all chain ends and subsequent reduction with NaBH4 yielded PEG-modified dendrimers encapsulating gold nanoparticles (Au NPs) of ca. 2 nm diameter. The Au NPs held in the dendrimers were stable in aqueous solutions and dissolved readily, even after freeze-drying. Despite their small particle size, the heat-generating ability of Au NPs held in the dendrimer was comparable to that of widely used Au NPs with ca. 11 nm diameter under visible light irradiation. The observed excellent colloidal stability, high heat-generating ability and their biocompatible surface confirm that the PEG-modified dendrimers encapsulating Au NPs are a promising tool for photothermal therapy and imaging.     

Tailored Synthesis of Octopus‐type Janus Nanoparticles for Synergistic Actively‐Targeted and Chemo‐Photothermal Therapy

A facile, reproducible, and scalable method was explored to construct uniform Au@poly(acrylic acid) (PAA) Janus nanoparticles (JNPs). The as‐prepared JNPs were used as templates to preferentially grow a mesoporous silica (mSiO₂) shell and Au branches separately modified with methoxy‐poly(ethylene glycol)‐thiol (PEG) to improve their stability, and lactobionic acid (LA) for tumor‐specific targeting. The obtained octopus‐type PEG‐Au‐PAA/mSiO₂‐LA Janus NPs (PEG‐OJNP‐LA) possess pH and NIR dual‐responsive release properties. Moreover, DOX‐loaded PEG‐OJNP‐LA, upon 808 nm NIR light irradiation, exhibit obviously higher toxicity at the cellular and animal levels compared with chemotherapy or photothermal therapy alone, indicating the PEG‐OJNP‐LA could be utilized as a multifunctional nanoplatform for in vitro and in vivo actively‐targeted and chemo‐photothermal cancer therapy.     

Mechanistic study on the replacement reaction between silver nanostructures and chloroauric acid in aqueous medium

The replacement reaction between silver nanostructures and an aqueous HAuCl(4) solution has recently been demonstrated as a versatile method for generating metal nanostructures with hollow interiors. Here we describe the results of a systematic study detailing the morphological, structural, compositional, and spectral changes involved in such a heterogeneous reaction on the nanoscale. Two distinctive steps have been resolved through a combination of microscopic and spectroscopic methods. In the first step, silver nanostructure (i.e., the template) is dissolved to generate gold atoms that are deposited epitaxially on the surface of each template. Silver atoms also diffuse into the gold shell (or sheath) to form a seamless, hollow nanostructure with its wall made of Au-Ag alloys. The second step involves dealloying, a process that selectively removes silver atoms from the alloyed wall, induces morphological reconstruction, and finally leads to the formation of pinholes in the walls. Reaction temperature was found to play an important role in the replacement reaction because the solubility constant of AgCl and the diffusion coefficients of Ag and Au atoms were both strongly dependent on this parameter. This work has enabled us to prepare metal nanostructures with controllable geometric shapes and structures, and thus optical properties (for example, the surface plasmon resonance peaks could be readily shifted from 500 to 1200 nm by controlling the ratio between Ag and HAuCl(4)).     

Polypyrrole nanoparticles for high-performance in vivo near-infrared photothermal cancer therapy

Polypyrrole nanoparticles (PPy NPs) exhibit strong absorption in the near infrared (NIR) region. With an excellent photothermal efficiency of ～45% at 808 nm, sub-100 nm PPy NPs are demonstrated to be a promising photothermal agent for in vivo cancer therapy using NIR irradiation.     

Synthesis and optical properties of nanorattles and multiple-walled nanoshells/nanotubes made of metal alloys

The galvanic replacement reaction between silver and chloroauric acid has been exploited as a powerful means for preparing metal nanostructures with hollow interiors. Here, the utility of this approach is further extended to produce complex core/shell nanostructures made of metals by combining the replacement reaction with electroless deposition of silver. We have fabricated nanorattles consisting of Au/Ag alloy cores and Au/Ag alloy shells by starting with Au/Ag alloy colloids as the initial template. We have also prepared multiple-walled nanoshells/nanotubes (or nanoscale Matrioshka) with a variety of shapes, compositions, and structures by controlling the morphology of the template and the precursor salt used in each step of the replacement reaction. There are a number of interesting optical features associated with these new core/shell metal nanostructures. For example, nanorattles made of Au/Ag alloys displayed two well-separated extinction peaks, a feature similar to that of gold or silver nanorods. The peak at approximately 510 nm could be attributed to the Au/Ag alloy cores, while the other peak was associated with the Au/Ag alloy shells and could be continuously tuned in the spectral range from red to near-infrared.     

Designed fabrication of ordered porous au/ag nanostructured films for surface-enhanced Raman scattering substrates

This article reports the designed preparation of two different kinds of novel porous metal nanostructured films, namely, an ordered macroporous Au/Ag nanostructured film and an ordered hollow Au/Ag nanostructured film. Different from previous reports, the presently proposed method can be conveniently used to control film structures by simply varying the experimental conditions. The morphology of these films has been characterized by scanning electron microscopy (SEM), and their performance as surface-enhanced Raman scattering (SERS) substrates has been evaluated by using rhodamine 6G (R6G) as a probe molecule. We show that such porous nanostructured films consisting of larger interconnected aggregates are highly desirable as SERS substrates in terms of high Raman intensity enhancement, excellent stability, and reproducibility. The interconnected nanostructured aggregate, long-range ordering porosity, and nanoscale roughness are important factors responsible for this large SERS enhancement ability.