A correction for balancing discontinuous bed slopes in two‐dimensional smoothed particle hydrodynamics shallow water modeling

In this paper, a smoothed particle hydrodynamics (SPH) numerical model for the shallow water equations (SWEs) with bed slope source term balancing is presented. The solution of the SWEs using SPH is attractive being a conservative, mesh‐free, automatically adaptive method without special treatment for wet‐dry interfaces. Recently, the capability of the SPH–SWEs numerical scheme with shock capturing and general boundary conditions has been used for predicting practical flooding problems. The balance between the bed slope source term and fluxes in shallow water models is desirable for reliable simulations of flooding over bathymetries where discontinuities are present and has received some attention in the framework of Finite Volume Eulerian models. The imbalance because of the source term resulting from the calculation of the the water depth is eradicated by means of a corrected mass, which is able to remove the error introduced by a bottom discontinuity. Two different discretizations of the momentum equation are presented herein: the first one is based on the variational formulation of the SWEs in order to obtain a fully conservative formulation, whereas the second one is obtained using a non‐conservative form of the free‐surface elevation gradient. In both formulations, a variable smoothing length is considered. Results are presented demonstrating the corrections preserve still water in the vicinity of either 1D or 2D bed discontinuities and provide close agreement with 1D analytical solutions for rapidly varying flows over step changes in the bed. The method is finally applied to 2D dam break flow over a square obstacle where the balanced formulation improves the agreement with experimental measurements of the free surface. Copyright © 2012 John Wiley & Sons, Ltd.     

A finite volume solver for 1D shallow‐water equations applied to an actual river

This paper describes the numerical solution of the 1D shallow‐water equations by a finite volume scheme based on the Roe solver. In the first part, the 1D shallow‐water equations are presented. These equations model the free‐surface flows in a river. This set of equations is widely used for applications: dam‐break waves, reservoir emptying, flooding, etc. The main feature of these equations is the presence of a non‐conservative term in the momentum equation in the case of an actual river. In order to apply schemes well adapted to conservative equations, this term is split in two terms: a conservative one which is kept on the left‐hand side of the equation of momentum and the non‐conservative part is introduced as a source term on the right‐hand side. In the second section, we describe the scheme based on a Roe Solver for the homogeneous problem. Next, the numerical treatment of the source term which is the essential point of the numerical modelisation is described. The source term is split in two components: one is upwinded and the other is treated according to a centred discretization. By using this method for the discretization of the source term, one gets the right behaviour for steady flow. Finally, in the last part, the problem of validation is tackled. Most of the numerical tests have been defined for a working group about dam‐break wave simulation. A real dam‐break wave simulation will be shown. Copyright © 2002 John Wiley & Sons, Ltd.     

Development of level set method with good area preservation to predict interface in two‐phase flows

A two‐step conservative level set method is proposed in this study to simulate the gas/water two‐phase flow. For the sake of accuracy, the spatial derivative terms in the equations of motion for an incompressible fluid flow are approximated by the coupled compact scheme. For accurately predicting the modified level set function, the dispersion‐relation‐preserving advection scheme is developed to preserve the theoretical dispersion relation for the first‐order derivative terms shown in the pure advection equation cast in conservative form. For the purpose of retaining its long‐time accurate Casimir functionals and Hamiltonian in the transport equation for the level set function, the time derivative term is discretized by the sixth‐order accurate symplectic Runge–Kutta scheme. To resolve contact discontinuity oscillations near interface, nonlinear compression flux term and artificial damping term are properly added to the second‐step equation of the modified level set method. For the verification of the proposed dispersion‐relation‐preserving scheme applied in non‐staggered grids for solving the incompressible flow equations, three benchmark problems have been chosen in this study. The conservative level set method with area‐preserving property proposed for capturing the interface in incompressible fluid flows is also verified by solving the dam‐break, Rayleigh–Taylor instability, bubble rising in water, and droplet falling in water problems. Good agreements with the referenced solutions are demonstrated in all the investigated problems. Copyright © 2010 John Wiley & Sons, Ltd.     

A Godunov method for the computation of erosional shallow water transients

A Godunov method is proposed for the computation of open‐channel flows in conditions of rapid bed erosion and intense sediment transport. Generalized shallow water equations govern the evolution of three distinct interfaces: the water free‐surface, the boundary between pure water and a sediment transport layer, and the morphodynamic bottom profile. Based on the HLL scheme of Harten, Lax and Van Leer (1983), a finite volume numerical solver is constructed, then extended to second‐order accuracy using Strang splitting and MUSCL extrapolation. Lateralisation of the momentum flux is adopted to handle the non‐conservative product associated with bottom slope. Computational results for erosional dam‐break waves are compared with experimental measurements and semi‐analytical Riemann solutions. Copyright © 2003 John Wiley & Sons, Ltd.     

A finite element/volume method model of the depth‐averaged horizontally 2D shallow water equations

Analysis of surface water flows is of central importance in understanding and predicting a wide range of water engineering issues. Dynamics of surface water is reasonably well described using the shallow water equations (SWEs) with the hydrostatic pressure assumption. The SWEs are nonlinear hyperbolic partial differential equations that are in general required to be solved numerically. Application of a simple and efficient numerical model is desirable for solving the SWEs in practical problems. This study develops a new numerical model of the depth‐averaged horizontally 2D SWEs referred to as 2D finite element/volume method (2D FEVM) model. The continuity equation is solved with the conforming, standard Galerkin FEM scheme and momentum equations with an upwind, cell‐centered finite volume method scheme, utilizing the water surface elevation and the line discharges as unknowns aligned in a staggered manner. The 2D FEVM model relies on neither Riemann solvers nor high‐resolution algorithms in order to serve as a simple numerical model. Water at a rest state is exactly preserved in the model. A fully explicit temporal integration is achieved in the model using an efficient approximate matrix inversion method. A series of test problems, containing three benchmark problems and three experiments of transcritical flows, are carried out to assess accuracy and versatility of the model. Copyright © 2014 John Wiley & Sons, Ltd.     

The improved space–time conservation element and solution element scheme for two‐dimensional dam‐break flow simulation

A new numerical scheme, namely space–time conservation element and solution element (CE/SE) method, has been used for the solution of the two‐dimensional (2D) dam‐break problem. Distinguishing from the well‐established traditional numerical methods (such as characteristics, finite difference, finite element, and finite‐volume methods), the CE/SE scheme has many non‐traditional features in both concept and methodology: space and time are treated in a unified way, which is the most important characteristic for the CE/SE method; the CEs and SEs are introduced, both local and global flux conservations in space and time rather than space only are enforced; an explicit scheme with a stagger grid is adopted. Furthermore, this scheme is robust and easy to implement. In this paper, an improved CE/SE scheme is extended to solve the 2D shallow water equations with the source terms, which usually plays a critical role in dam‐break flows. To demonstrate the accuracy, robustness and efficiency of the improved CE/SE method, both 1D and 2D dam‐break problems are simulated numerically, and the results are consistent with either the analytical solutions or experimental results. Copyright © 2011 John Wiley & Sons, Ltd.     

Two‐dimensional dam break flow simulation

Numerical modelling of shallow water flow in two dimensions is presented in this work with the results obtained in dam break tests. Free surface flow in channels can be described mathematically by the shallow‐water system of equations. These equations have been discretized using an approach based on unstructured Delaunay triangles and applied to the simulation of two‐dimensional dam break flows. A cell centred finite volume method based on Roe's approximate Riemann solver across the edges of the cells is presented and the results are compared for first‐ and second‐order accuracy. Special treatment of the friction term has been adopted and will be described. The scheme is capable of handling complex flow domains as shown in the simulation corresponding to the test cases proposed, i.e. that of a dam break wave propagating into a 45° bend channel (UCL) and in a channel with a constriction (LNEC‐IST). Comparisons of experimental and numerical results are shown. Copyright © 2000 John Wiley & Sons, Ltd.     

A new well‐balanced Hermite weighted essentially non‐oscillatory scheme for shallow water equations

Hermite weighted essentially non‐oscillatory (HWENO) methods were introduced in the literature, in the context of Euler equations for gas dynamics, to obtain high‐order accuracy schemes characterized by high compactness (e.g. Qiu and Shu, J. Comput. Phys. 2003; 193 :115). For example, classical fifth‐order weighted essentially non‐oscillatory (WENO) reconstructions are based on a five‐cell stencil whereas the corresponding HWENO reconstructions are based on a narrower three‐cell stencil. The compactness of the schemes allows easier treatment of the boundary conditions and of the internal interfaces. To obtain this compactness in HWENO schemes both the conservative variables and their first derivatives are evolved in time, whereas in the original WENO schemes only the conservative variables are evolved. In this work, an HWENO method is applied for the first time to the shallow water equations (SWEs), including the source term due to the bottom slope, to obtain a fourth‐order accurate well‐balanced compact scheme. Time integration is performed by a strong stability preserving the Runge–Kutta method, which is a five‐step and fourth‐order accurate method. Besides the classical SWE, the non‐homogeneous equations describing the time and space evolution of the conservative variable derivatives are considered here. An original, well‐balanced treatment of the source term involved in such equations is developed and tested. Several standard one‐dimensional test cases are used to verify the high‐order accuracy, the C‐property and the good resolution properties of the model. Copyright © 2010 John Wiley & Sons, Ltd.     

A robust 2D shallow water model for solving flow over complex topography using homogenous flux method

A robust Godunov‐type numerical scheme solver is proposed for solving 2D SWEs and is applied to simulate flow over complex topography with wetting and drying. In reality, the topography is usually complex and irregular; therefore, to avoid the numerical errors generated by such features, a Homogenous Flux Method is used to handle the bed slope term in the SWEs. The method treats the bed slope term as a flux to be incorporated into the flux gradient and so maintains the balance between the two in a Godunov‐type shock‐capturing scheme. The main advantages of the method are: first, it is simple and easy to implement; second, numerical experiments demonstrate that it can handle discontinuous or vertical bed topography without any special treatment and third, it is applicable to both steady and unsteady flows. It is demonstrated how the approach set out here can be applied to the nonlinear hyperbolic system of the SWEs. The two‐dimensional hyperbolic system is then solved by use of a second‐order total‐variation‐diminishing version of the weighted average flux method in conjunction with a Harten‐Lax‐van Leer‐Contract approximate Riemann solver incorporating the new flux gradient term. Several benchmark tests are presented to validate the model and the approach is verified against experimental measurements from the European Union Concerted Action on Dam Break Modelling project. These show very good agreement. Finally, the method is applied to a volcano‐induced outburst flood over an initially dry channel with complex irregular topography to demonstrate the technique's capability in simulating a real flood. Copyright © 2013 John Wiley & Sons, Ltd.     

Simulation of dam‐ and dyke‐break hydrodynamics on dynamically adaptive quadtree grids

Flooding due to the failure of a dam or dyke has potentially disastrous consequences. This paper presents a Godunov‐type finite volume solver of the shallow water equations based on dynamically adaptive quadtree grids. The Harten, Lax and van Leer approximate Riemann solver with the Contact wave restored (HLLC) scheme is used to evaluate interface fluxes in both wet‐ and dry‐bed applications. The numerical model is validated against results from alternative numerical models for idealized circular and rectangular dam breaks. Close agreement is achieved with experimental measurements from the CADAM dam break test and data from a laboratory dyke break undertaken at Delft University of Technology. Copyright © 2004 John Wiley Sons, Ltd.     

Solution of the shallow‐water equations using an adaptive moving mesh method

This paper extends an adaptive moving mesh method to multi‐dimensional shallow water equations (SWE) with source terms. The algorithm is composed of two independent parts: the SWEs evolution and the mesh redistribution. The first part is a high‐resolution kinetic flux‐vector splitting (KFVS) method combined with the surface gradient method for initial data reconstruction, and the second part is based on an iteration procedure. In each iteration, meshes are first redistributed by a variational principle and then the underlying numerical solutions are updated by a conservative‐interpolation formula on the resulting new mesh. Several test problems in one‐ and two‐dimensions with a general geometry are computed using the proposed moving mesh algorithm. The computations demonstrate that the algorithm is efficient for solving problems with bore waves and their interactions. The solutions with higher resolution can be obtained by using a KFVS scheme for the SWEs with a much smaller number of grid points than the uniform mesh approach, although we do not treat technically the bed slope source terms in order to balance the source terms and flux gradients. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical solutions of the shallow water equations with discontinuous bed topography

A simple scheme is developed for treatment of vertical bed topography in shallow water flows. The effect of the vertical step on flows is modelled with the shallow water equations including local energy loss terms. The bed elevation is denoted with z_b^‐ for the left and z_b⁺ for the right values at each grid point, hence exactly representing a discontinuity in the bed topography. The surface gradient method (SGM) is generalized to reconstruct water depths at cell interfaces involving a vertical step so that the fluxes at the cell interfaces can accurately be calculated with a Riemann solver. The scheme is verified by predicting a surge crossing a step, a tidal flow over a step and dam‐break flows on wet/dry beds. The results have shown good agreements compared with analytical solutions and available experimental data. The scheme is efficient, robust, and may be used for practical flow calculations. Copyright © 2002 John Wiley & Sons, Ltd.     

Shoreline tracking and implicit source terms for a well balanced inundation model

The HyFlux2 model has been developed to simulate severe inundation scenario due to dam break, flash flood and tsunami‐wave run‐up. The model solves the conservative form of the two‐dimensional shallow water equations using the finite volume method. The interface flux is computed by a Flux Vector Splitting method for shallow water equations based on a Godunov‐type approach. A second‐order scheme is applied to the water surface level and velocity, providing results with high accuracy and assuring the balance between fluxes and sources also for complex bathymetry and topography. Physical models are included to deal with bottom steps and shorelines. The second‐order scheme together with the shoreline‐tracking method and the implicit source term treatment makes the model well balanced in respect to mass and momentum conservation laws, providing reliable and robust results. The developed model is validated in this paper with a 2D numerical test case and with the Okushiri tsunami run up problem. It is shown that the HyFlux2 model is able to model inundation problems, with a satisfactory prediction of the major flow characteristics such as water depth, water velocity, flood extent, and flood‐wave arrival time. The results provided by the model are of great importance for the risk assessment and management. Copyright © 2009 John Wiley & Sons, Ltd.     

An upstream flux‐splitting finite‐volume scheme for 2D shallow water equations

An upstream flux‐splitting finite‐volume (UFF) scheme is proposed for the solutions of the 2D shallow water equations. In the framework of the finite‐volume method, the artificially upstream flux vector splitting method is employed to establish the numerical flux function for the local Riemann problem. Based on this algorithm, an UFF scheme without Jacobian matrix operation is developed. The proposed scheme satisfying entropy condition is extended to be second‐order‐accurate using the MUSCL approach. The proposed UFF scheme and its second‐order extension are verified through the simulations of four shallow water problems, including the 1D idealized dam breaking, the oblique hydraulic jump, the circular dam breaking, and the dam‐break experiment with 45° bend channel. Meanwhile, the numerical performance of the UFF scheme is compared with those of three well‐known upwind schemes, namely the Osher, Roe, and HLL schemes. It is demonstrated that the proposed scheme performs remarkably well for shallow water flows. The simulated results also show that the UFF scheme has superior overall numerical performances among the schemes tested. Copyright © 2005 John Wiley & Sons, Ltd.     

一维孔隙率浅水方程及其数值离散

通过孔隙率方法来描述挡水物对过水能力的影响建立了一维孔隙率浅水方程. 采用有限体积方法和Roe格式的近似Riemann解建立了孔隙率浅水方程的离散模式. 对底坡和孔隙率源项采用特性方向分解的方法进行处理,使模型精确满足C(Conservative)特性,增加了模型的稳定性. 通过算例模拟证明了模型可以对河道中的挡水物作用进行模拟,且计算结果表明模型具有和谐、稳定、分辨率高等优点.      

Adaptive Q‐tree Godunov‐type scheme for shallow water equations

This paper presents details of a second‐order accurate, Godunov‐type numerical model of the two‐dimensional shallow water equations (SWEs) written in matrix form and discretized using finite volumes. Roe's flux function is used for the convection terms and a non‐linear limiter is applied to prevent unwanted spurious oscillations. A new mathematical formulation is presented, which inherently balances flux gradient and source terms. It is, therefore, suitable for cases where the bathymetry is non‐uniform, unlike other formulations given in the literature based on Roe's approximate Riemann solver. The model is based on hierarchical quadtree (Q‐tree) grids, which adapt to inherent flow parameters, such as magnitude of the free surface gradient and depth‐averaged vorticity. Validation tests include wind‐induced circulation in a dish‐shaped basin, two‐dimensional frictionless rectangular and circular dam‐breaks, an oblique hydraulic jump, and jet‐forced flow in a circular reservoir. Copyright © 2001 John Wiley & Sons, Ltd.     

Central schemes for open‐channel flow

The resolution of the Saint‐Venant equations for modelling shock phenomena in open‐channel flow by using the second‐order central schemes of Nessyahu and Tadmor (NT) and Kurganov and Tadmor (KT) is presented. The performances of the two schemes that we have extended to the non‐homogeneous case and that of the classical first‐order Lax–Friedrichs (LF) scheme in predicting dam‐break and hydraulic jumps in rectangular open channels are investigated on the basis of different numerical and physical conditions. The efficiency and robustness of the schemes are tested by comparing model results with analytical or experimental solutions. Copyright © 2003 John Wiley & Sons, Ltd.     

A kinetic interpretation of the section‐averaged Saint‐Venant system for natural river hydraulics

The classical Saint‐Venant system is well suited for the modeling of dam breaks, hydraulic jumps, reservoir emptying, flooding etc. For many applications, the extension of the Saint‐Venant system to the case of non‐rectangular channels is necessary and this section‐averaged Saint‐Venant system exhibits additional source terms. The main difficulty of these equations consists of the discretization of these source terms. In this paper we propose a kinetic interpretation for the section averaged Saint‐Venant system and derive an associated numerical scheme. The numerical scheme—2nd order in space and time—preserves the positivity of the water height, and is well‐balanced. Numerical results including comparisons with analytic and experimental test problems illustrate the accuracy and the robustness of the numerical algorithm. Copyright © 2010 John Wiley & Sons, Ltd.     

A Boltzmann based model for open channel flows

A finite volume, Boltzmann Bhatnagar–Gross–Krook (BGK) numerical model for one‐ and two‐dimensional unsteady open channel flows is formulated and applied. The BGK scheme satisfies the entropy condition and thus prevents unphysical shocks. In addition, the van Leer limiter and the collision term ensure that the BGK scheme admits oscillation‐free solutions only. The accuracy and efficiency of the BGK scheme are demonstrated through the following examples: (i) strong shock waves, (ii) extreme expansion waves, (iii) a combination of strong shock waves and extreme expansion waves, and (iv) one‐ and two‐dimensional dam break problems. These test cases are performed for a variety of Courant numbers (C_r), with the only condition being C_r≤1. All the computational results are free of spurious oscillations and unphysical shocks (i.e., expansion shocks). In addition, comparisons of numerical tests with measured data from dam break laboratory experiments show good agreement for C_r≤0.6. This reduction in the stability domain is due to the explicit integration of the friction term. Furthermore, BGK schemes are easily extended to multidimensional problems and do not require characteristic decomposition. The proposed scheme is second‐order in both space and time when the external forces are zero and second‐order in space but first‐order in time when the external forces are non‐zero. However, since all the test cases presented are either for zero or small values of external forces, the results tend to maintain second‐order accuracy. In problems where the external forces become significant, it is possible to improve the order of accuracy of the scheme in time by, for example, applying the Runge–Kutta method in the integration of the external forces. Copyright © 2001 John Wiley & Sons, Ltd.