The effect of inflow conditions on the transition to turbulence in large eddy simulations of spatially developing mixing layers

Large Eddy Simulations (LES) of spatially developing turbulent mixing layers have been performed for flows of uniform density and Reynolds numbers of up to 50,000 based on the visual thickness of the layer and the velocity difference across it. On a fine LES grid, a validation simulation performed with a hyperbolic tangent inflow profile produces flow statistics that compare extremely well with reference Direct Numerical Simulation (DNS) data. An inflow profile derived from laminar Blasius profiles produces a flow that is significantly different to the reference DNS, particularly with respect to the initial development of the flow. When compared with experimental data, however, it is the boundary layer-type inflow simulation produces the better prediction of the flow statistics, including the mean transition location. It is found that the boundary layer inflow condition is more unstable than the hyperbolic tangent inlet profile. A suitably designed coarse LES grid produces good predictions of the mean transition location with boundary layer inflow conditions at a low computational cost. The results suggest that hyperbolic tangent functions may produce unreliable DNS data when used as the initial condition for studies of the transition in the mixing layer flow.     

Simulations of high‐aspect‐ratio jets

There are many practical situations when jets are emanating from non‐axis‐symmetric apertures, yet numerical simulations of such three‐dimensional jets are scarce and most of them have failed to reproduce some of the unique flow features. Examples of this type of jets are gas leaks from flanges. These can be treated as jets issuing from high aspect ratio rectangular orifices. The present work consists of a series of large eddy simulations typifying such jets using different inflow boundary conditions. Good agreement with available experiments was observed provided appropriate boundary conditions were present. A discrete method for formulating turbulence data with a known energy spectrum for an inflow condition is outlined and evaluated with three other inflow conditions–a steady uniform profile, a steady parabolic profile and pseudo‐random noise. The implementation of the new inlet condition results in a more realistic centreline velocity decay where the division between the end of the potential core region and the start of the characteristic decay region is clearly visible. Large velocity oscillations are also observed in the final quarter of the domain (15–20 slot widths downstream). Similar oscillations have been observed in real jets. Off‐centre mean velocity peaks are present along the major axis 10 slot widths downstream of the exit in all the simulations. The peaks are approximately 3% of the centreline velocity. The presence of the off‐centre peaks are proved to be independent of jet inflow boundary conditions and an explanation for the mechanism causing the off‐centre peaks is given. Copyright © 2002 John Wiley & Sons, Ltd.     

Investigation of turbulence development in incompressible jets with zonal detached eddy simulation (ZDES) and synthetic turbulent inflow

Hybrid RANS/LES simulations of two incompressible jets are performed with the Zonal Detached Eddy Simulation (ZDES). Two functioning modes of the ZDES for the selection of RANS and DES areas are evaluated, namely the user-defined mode (mode 1) and the global- or automatic- mode (mode 2). The RANS-to-LES transition occurs quickly downstream of the nozzle exit and is found to involve the same physics as a laminar to turbulent transition with vortex pairing near the nozzle exit. The effect of the delay in the RANS-to-LES transition on the jet flow development is analyzed. In particular, the delay in the formation of small-scale turbulent structures results in too high turbulence levels in the mixing layers. Furthermore, it is shown, for two cases, that the injection of synthetic turbulence at the nozzle inlet, originally targeted at reproducing the experimental turbulence level in the jet core, has a significant impact on the mixing layer as it accelerates the RANS-to-LES transition, reduces the spatial wavelength of the vortex pairing and promotes the production of fine-scale turbulence which leads to a better agreement with experiments.     

Large eddy simulation of free surface shallow‐water flow

Shallow‐water flow with free surface frequently occurs in ambient water bodies, in which the horizontal scale of motion is generally two orders of magnitude greater than the water depth. To accurately predict this flow phenomenon in more detail, a three‐dimensional numerical model incorporating the method of large eddy simulation (LES) has been developed and assessed. The governing equations are split into three parts in the finite difference solution: advection, dispersion and propagation. The advection part is solved by the QUICKEST scheme. The dispersion part is solved by the central difference method and the propagation part is solved implicitly using the Gauss–Seidel iteration method. The model has been applied to free surface channel flow for which ample experimental data are available for verification. The inflow boundary condition for turbulence is generated by a spectral line processor. The computed results compare favourably with the experimental data and those results obtained by using a periodic boundary condition. The performance of the model is also assessed for the case in which anisotropic grids and filters with horizontal grid size of the order of the water depth are used for computational efficiency. The coarse horizontal grid was found to cause a significant reduction in the large‐scale turbulent motion generated by the bottom turbulence, and the turbulent motion is predominately described by the sub‐grid scale (SGS) terms. The use of the Smagorinsky model for SGS turbulence in this situation is found inappropriate. A parabolic mixing length model, which accounts for the filtered turbulence, is then proposed. The new model can reproduce more accurately the flow quantities. Copyright © 2000 John Wiley & Sons, Ltd.     

Turbulence in a three‐dimensional wall‐bounded shear flow

A new turbulent flow with distinct three‐dimensional characteristics has been designed in order to study the impact of mean‐flow skewing on the turbulent coherent vortices and Reynolds‐averaged statistics. The skewing of a unidirectional plane Couette flow was achieved by means of a spanwise pressure gradient. Direct numerical simulations of the statistically steady Couette–Poiseuille flow enabled in‐depth explorations of the turbulence field in the skewed flow. The imposition of a modest spanwise gradient turned the mean flow about 8° away from the original Couette flow direction and this turning angle remained nearly the same over the entire cross section. Nevertheless, a substantial non‐alignment between the turbulent shear stress angle and the mean velocity gradient angle was observed. The structure parameter turned out to slightly exceed that in the pure Couette flow, contrary to the observations made in some other three‐dimensional shear flows. Coherent flow structures, which are known to be associated with the Reynolds shear stress in near‐wall regions, were identified by the λ₂‐criterion. Instantaneous and ensemble‐averaged vortices resembled those found in the unidirectional Couette flow. In the skewed flow, however, the vortex structures were turned to align with the local mean‐flow direction. The conventional symmetry between Case 1 and Case 2 vortices was broken due to the mean‐flow three‐dimensionality. The turning of the coherent vortices and the accompanying symmetry‐breaking gave rise to secondary and tertiary turbulent shear stress components. By averaging the already ensemble‐averaged shear stresses associated with Case 1 and Case 2 vortices in the homogeneous directions, a direct link between the educed near‐wall structures and the Reynolds‐averaged turbulent stresses was established. These observations provide evidence in support of the hypothesis that the structural model proposed for two‐dimensional turbulent boundary layers remains valid also in flows with moderate mean three‐dimensionality. Copyright © 2009 John Wiley & Sons, Ltd.     

An adaptive front tracking technique for three‐dimensional transient flows

An adaptive technique, based on both surface stretching and surface curvature analysis for tracking strongly deforming fluid volumes in three‐dimensional flows is presented. The efficiency and accuracy of the technique are demonstrated for two‐ and three‐dimensional flow simulations. For the two‐dimensional test example, the results are compared with results obtained using a different tracking approach based on the advection of a passive scalar. Although for both techniques roughly the same structures are found, the resolution for the front tracking technique is much higher. In the three‐dimensional test example, a spherical blob is tracked in a chaotic mixing flow. For this problem, the accuracy of the adaptive tracking is demonstrated by the volume conservation for the advected blob. Adaptive front tracking is suitable for simulation of the initial stages of fluid mixing, where the interfacial area can grow exponentially with time. The efficiency of the algorithm significantly benefits from parallelization of the code. Copyright © 2000 John Wiley & Sons, Ltd.     

Toward low‐noise synthetic turbulent inflow conditions for aeroacoustic calculations

The accuracy of boundary conditions for computational aeroacoustics is a well‐known challenge, due in part to the necessity of truncating the flow domain and replacing the analytical boundary conditions at infinity with numerical boundary conditions. In particular, the inflow boundary condition involving turbulent velocity or scalar fields is likely to introduce spurious waves into the domain, therefore degrading the flow behavior and deteriorating the physical acoustic waves. In this work, a method to generate low‐noise, divergence‐free, synthetic turbulence for inflow boundary conditions is proposed. It relies on the classical view of turbulence as a superposition of random eddies convected with the mean flow. Within the proposed model, the vector potential and the requirement that the individual eddies must satisfy the linearized momentum equations about the mean flow are used. The model is tested using isolated eddies convected through the inflow boundary and an experimental benchmark data for spatially decaying isotropic turbulence. Copyright © 2013 John Wiley & Sons, Ltd.     

Three‐dimensional remeshed smoothed particle hydrodynamics for the simulation of isotropic turbulence

We present a remeshed particle‐mesh method for the simulation of three‐dimensional compressible turbulent flow. The method is related to the meshfree smoothed particle hydrodynamics method, but the present method introduces a mesh for efficient calculation of the pressure gradient, and laminar and turbulent diffusion. In addition, the mesh is used to remesh (reorganise uniformly) the particles to ensure a regular particle distribution and convergence of the method. The accuracy of the presented methodology is tested for a number of benchmark problems involving two‐ and three‐dimensional Taylor‐Green flow, thin double shear layer, and three‐dimensional isotropic turbulence. Two models were implemented, direct numerical simulations, and Smagorinsky model. Taking advantage of the Lagrangian advection, and the finite difference efficiency, the method is capable of providing quality simulations while maintaining its robustness and versatility.     

A reformulated synthetic turbulence generation method for a zonal RANS–LES method and its application to zero-pressure gradient boundary layers

A synthetic turbulence generation (STG) method for subsonic and supersonic flows at low and moderate Reynolds numbers to provide inflow distributions of zonal Reynolds-averaged Navier–Stokes (RANS) – large-eddy simulation (LES) methods is presented. The STG method splits the LES inflow region into three planes where a local velocity signal is decomposed from the turbulent flow properties of the upstream RANS solution. Based on the wall-normal position and the local flow Reynolds number, specific length and velocity scales with different vorticity content are imposed at the inlet plane of the boundary layer. The quality of the STG method for incompressible and compressible zero-pressure gradient boundary layers is shown by comparing the zonal RANS–LES data with pure LES, pure RANS, and direct numerical simulation (DNS) solutions. The distributions of the time and spanwise wall-shear stress, Reynolds stress distributions, and two point correlations of the zonal RANS–LES simulations are smooth in the transition region and in good agreement with the pure LES and reference DNS findings. The STG approach reduces the RANS-to-LES transition length to less than four boundary-layer thicknesses.     

Fully non‐linear free‐surface simulations by a 3D viscous numerical wave tank

A finite difference scheme using a modified marker‐and‐cell (MAC) method is applied to investigate the characteristics of non‐linear wave motions and their interactions with a stationary three‐dimensional body inside a numerical wave tank (NWT). The Navier–Stokes (NS) equation is solved for two fluid layers, and the boundary values are updated at each time step by a finite difference time marching scheme in the frame of a rectangular co‐ordinate system. The viscous stresses and surface tension are neglected in the dynamic free‐surface condition, and the fully non‐linear kinematic free‐surface condition is satisfied by the density function method developed for two fluid layers. The incident waves are generated from the inflow boundary by prescribing a velocity profile resembling flexible flap wavemaker motions, and the outgoing waves are numerically dissipated inside an artificial damping zone located at the end of the tank. The present NS–MAC NWT simulations for a vertical truncated circular cylinder inside a rectangular wave tank are compared with the experimental results of Mercier and Niedzwecki, an independently developed potential‐based fully non‐linear NWT, and the second‐order diffraction computation. Copyright © 1999 John Wiley & Sons, Ltd.     

A two‐scale low‐Reynolds number turbulence model

In this study, a two‐scale low‐Reynolds number turbulence model is proposed. The Kolmogorov turbulence time scale, based on fluid kinematic viscosity and the dissipation rate of turbulent kinetic energy (ν, ε), is adopted to address the viscous effects and the rapid increasing of dissipation rate in the near‐wall region. As a wall is approached, the turbulence time scale transits smoothly from a turbulent kinetic energy based (k, ε) scale to a (ν, ε) scale. The damping functions of the low‐Reynolds number models can thus be simplified and the near‐wall turbulence characteristics, such as the ε distribution, are correctly reproduced. The proposed two‐scale low‐Reynolds number turbulence model is first examined in detail by predicting a two‐dimensional channel flow, and then it is applied to predict a backward‐facing step flow. Numerical results are compared with the direct numerical simulation (DNS) budgets, experimental data and the model results of Chien, and Lam and Bremhorst respectively. It is proved that the proposed two‐scale model indeed improves the predictions of the turbulent flows considered. Copyright © 2000 John Wiley & Sons, Ltd.     

Large eddy simulation (2D) of spatially developing mixing layer using vortex‐in‐cell for flow field and filtered probability density function for scalar field

A large eddy simulation based on filtered vorticity transport equation has been coupled with filtered probability density function transport equation for scalar field, to predict the velocity and passive scalar fields. The filtered vorticity transport has been formulated using diffusion‐velocity method and then solved using the vortex method. The methodology has been tested on a spatially growing mixing layer using the two‐dimensional vortex‐in‐cell method in conjunction with both Smagorinsky and dynamic eddy viscosity subgrid scale models for an anisotropic flow. The transport equation for filtered probability density function is solved using the Lagrangian Monte‐Carlo method. The unresolved subgrid scale convective term in filtered density function transport is modelled using the gradient diffusion model. The unresolved subgrid scale mixing term is modelled using the modified Curl model. The effects of subgrid scale models on the vorticity contours, mean streamwise velocity profiles, root‐mean‐square velocity and vorticity fluctuations profiles and negative cross‐stream correlations are discussed. Also the characteristics of the passive scalar, i.e. mean concentration profiles, root‐mean‐square concentration fluctuations profiles and filtered probability density function are presented and compared with previous experimental and numerical works. The sensitivity of the results to the Schmidt number, constant in mixing frequency and inflow boundary conditions are discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

Evaluation of one‐ and two‐equation low‐Re turbulence models. Part II—Vortex‐generator jet and diffusing S‐duct flows

This second segment of the two‐part paper systematically examines several turbulence models in the context of two flows, namely a vortex flow created by an inclined jet in crossflow, and the flow field in a diffusing S‐shaped duct. The test cases are chosen on the basis of availability of high‐quality and detailed experimental data. The tested turbulence models are integrated to solid surfaces and consist of: Rodi's two‐layer k–ε model, Wilcox's k–ω model, Menter's two‐equation shear–stress‐transport model, and the one‐equation model of Spalart and Allmaras. The objective of the study is to establish the prediction accuracy of these turbulence models with respect to three‐dimensional separated flows with streamline curvature. At the same time, the study establishes the minimum spatial resolution requirements for each of these turbulence closures, and identifies the proper low‐Mach‐number preconditioning and artificial diffusion settings of a Reynolds‐averaged Navier–Stokes algorithm for optimum rate of convergence and minimum adverse impact on prediction accuracy. Copyright © 2003 John Wiley & Sons, Ltd.     

时间发展平面混合流的三维演化

采用高精度差分方法和群速度控制方法，求解三维可压缩Ｎ Ｓ方程，直接数值模拟了时间发展的平面混合流．研究了平面混合流三维拟序结构的形成及发展．给出了流动失稳后涡的卷起，相邻两涡的对并，激波的形成及发展．指出，涡对并所诱导产生的激波对三维拟序结构的形成及发展过程是重要的．     

Implicit preconditioned high‐order compact scheme for the simulation of the three‐dimensional incompressible Navier–Stokes equations with pseudo‐compressibility method

This paper combines the pseudo‐compressibility procedure, the preconditioning technique for accelerating the time marching for stiff hyperbolic equations, and high‐order accurate central compact scheme to establish the code for efficiently and accurately solving incompressible flows numerically based on the finite difference discretization. The spatial scheme consists of the sixth‐order compact scheme and 10th‐order numerical filter operator for guaranteeing computational stability. The preconditioned pseudo‐compressible Navier–Stokes equations are marched temporally using the implicit lower–upper symmetric Gauss–Seidel time integration method, and the time accuracy is improved by the dual‐time step method for the unsteady problems. The efficiency and reliability of the present procedure are demonstrated by applications to Taylor decaying vortices phenomena, double periodic shear layer rolling‐up problem, laminar flow over a flat plate, low Reynolds number unsteady flow around a circular cylinder at Re = 200, high Reynolds number turbulence flow past the S809 airfoil, and the three‐dimensional flows through two 90°curved ducts of square and circular cross sections, respectively. It is found that the numerical results of the present algorithm are in good agreement with theoretical solutions or experimental data. Copyright © 2011 John Wiley & Sons, Ltd.     

Lattice‐Boltzmann and finite element simulations of fluid flow in a SMRX Static Mixer Reactor

A detailed comparison between the finite element method (FEM) and the lattice‐Boltzmann method (LBM) is presented. As a realistic test case, three‐dimensional fluid flow simulations in an SMRX static mixer were performed. The SMRX static mixer is a piece of equipment with excellent mixing performance and it is used as a highly efficient chemical reactor for viscous systems like polymers. The complex geometry of this mixer makes such three‐dimensional simulations non‐trivial. An excellent agreement between the results of the two simulation methods was found. Furthermore, the numerical results for the pressure drop as a function of the flow rate were close to experimental measurements. Results show that the relatively simple LBM is a good alternative to traditional methods. Copyright © 1999 John Wiley & Sons, Ltd.     

Applications of a higher‐order bounded numerical scheme to turbulent flows

This paper applies the higher‐order bounded numerical scheme Weighted Average Coefficients Ensuring Boundedness (WACEB) to simulate two‐ and three‐dimensional turbulent flows. In the scheme, a weighted average formulation is used for interpolating the variables at cell faces and the weighted average coefficients are determined from a normalized variable formulation and total variation diminishing (TVD) constraints to ensure the boundedness of the solution. The scheme is applied to two turbulent flow problems: (1) two‐dimensional turbulent flow around a blunt plate; and (2) three‐dimensional turbulent flow inside a mildly curved U‐bend. In the present study, turbulence is evaluated by using a low‐Reynolds number version of the k–ω model. For the flow simulation, the QUICK scheme is applied to the momentum equations while either the WACEB scheme (Method 1) or the UPWIND scheme (Method 2) is used for the turbulence equations. The present study shows that the WACEB scheme has at least second‐order accuracy while ensuring boundedness of the solutions. The present numerical study for a pure convection problem shows that the ‘TVD’ slope ranges from 2 to 4. For the turbulent recirculating flow, two different mixed procedures (Method 1 and Method 2) produce a substantial difference for the mean velocities as well as for the turbulence kinetic energy. Method 1 predicts better results than Method 2 does, comparing the analytical solution and the experimental data. For the turbulent flow inside the mildly curved U‐bend, although the predictions of velocity distributions with two procedures are very close, a noticeable difference of turbulence kinetic energy is exhibited. It is noticed that the discrepancy exists between numerical results and the experimental data. The reason is the limit of the two‐equation turbulence model to such complex turbulent flows with extra strain‐rates. Copyright © 2001 John Wiley & Sons, Ltd.     

Finite element solution of three‐dimensional turbulent flows applied to mold‐filling problems

This paper presents a finite element solution algorithm for three‐dimensional isothermal turbulent flows for mold‐filling applications. The problems of interest present unusual challenges for both the physical modelling and the solution algorithm. High‐Reynolds number transient turbulent flows with free surfaces have to be computed on complex three‐dimensional geometries. In this work, a segregated algorithm is used to solve the Navier–Stokes, turbulence and front‐tracking equations. The streamline–upwind/Petrov–Galerkin method is used to obtain stable solutions to convection‐dominated problems. Turbulence is modelled using either a one‐equation turbulence model or the κ–ε two‐equation model with wall functions. Turbulence equations are solved for the natural logarithm of the turbulence variables. The change of dependent variables allows for a robust solution algorithm and good predictions even on coarse meshes. This is very important in the case of large three‐dimensional applications for which highly refined meshes result in untreatable large numbers of elements. The position of the flow front in the mold cavity is computed using a level set approach. Finally, equations are integrated in time using an implicit Euler scheme. The methodology presents the robustness and cost effectiveness needed to tackle complex industrial applications. Copyright © 2000 John Wiley & Sons, Ltd.     

On streamwise vortices in Large Eddy Simulations of initially laminar plane mixing layers

This paper details the influence of the nature of imposed inflow fluctuations on Large Eddy Simulations of a spatially developing turbulent mixing layer originating from laminar boundary layers. A simulation with imposed white-noise random fluctuations, commonly used in numerical simulations, produces mean-flow statistics that agree well with reference experimental data. Whilst flow visualisation images show evidence for streamwise vorticity in this simulation, quantitative statistics do not reveal the presence of statistically stationary streamwise vortices. A further simulation that uses physically-correlated inflow fluctuations also produces good mean-flow statistical agreement with reference data. From secondary shear stress contours it can be inferred that this simulation does, however, predict the presence of statistically stationary streamwise vortices. The properties of the streamwise vortices are in good agreement with experimental data. The data presented here indicate that, even for initially laminar conditions, plane mixing layer simulations require accurate physically correlated inflow conditions in order to reproduce the flow features found experimentally.     

LES of temporally evolving mixing layers by an eighth‐order filter scheme

An eighth‐order filter method for a wide range of compressible flow speeds (H. C. Yee and B. Sjogreen, Proceedings of ICOSAHOM09, June 22–26, 2009, Trondheim, Norway) is employed for large eddy simulations (LES) of temporally evolving mixing layers (TML) for different convective Mach numbers (M_c) and Reynolds numbers. The high‐order filter method is designed for accurate and efficient simulations of shock‐free compressible turbulence, turbulence with shocklets, and turbulence with strong shocks with minimum tuning of scheme parameters. The value of the M_c considered is for the TML range from the quasi‐incompressible regime to the highly compressible supersonic regime. The three main characteristics of compressible TML (the self‐similarity property, compressibility effects, and the presence of large‐scale structures with shocklets for high M_c) are considered for the LES study. The LES results that used the same scheme parameters for all studied cases agree well with experimental results and published direct numerical simulations (DNS). Published 2012. This article is a US Government work and is in the public domain in the USA.