Impedance Study of GaN and InGaN Semiconductor Anion Selective Electrodes

The response of potentiometric anion selective electrodes employing undoped GaN or In_0.2Ga_0.8N films as sensing element to detect various anions was investigated in solutions of KF, KNO₃, KCl, HOC₆H₄COONa, KSCN, CH₃COOK, KClO₄ and KBr salts. The calibration plots for the GaN and In_0.2Ga_0.8N semiconductor electrodes contained linear regions extending over four decades of activity change in most solutions. The structure of the GaN and In_0.2Ga_0.8N semiconductor electrode/ electrolyte interface was studied through electrochemical impedance spectroscopy. Analogous equivalent circuits modeling the GaN or In_0.2Ga_0.8N electrode/electrolyte interface were proposed and their parameters were calculated. The space charge layer of the GaN and In_0.2Ga_0.8N semiconductors dominated the impedance of the electrochemical system at high frequencies (>10 kHz), whereas at low frequencies (<10 kHz), the impedance was controlled by the diffusion of electroactive species across the layer of adsorbed ions at the surface of the electrode. Results imply a strong dependence of the electrodes performance on the adsorption capacity of tested anions.     

Cyanide ion-selective electrodes based on thin electroplated membranes of silver chalcogenides: Part I. Membrane preparation and characterization

Cyanide-responsive ion-selective electrodes have been developed based on thin tellurium-doped silver selenide membranes electrodeposited on platinum substrates. The chemical composition of the electroplated film membranes could be expressed by the general formula Ag_2+δSe_1?xTe_x (where 0.2 < δ < 0.8 and 0.2 ? × ? 0.1). These electrodes exhibit a linear response in cyanide solutions with concentrations ranging from 10^?2 to 10^?6 M, with a slope of the electrode function of about 90 mV (pCN)^?1 (i.e., lower than the theoretically predicted double-Nernstian slope). These electrodes showed very stable behaviour during long-term investigation (several months). The conditions for the electrochemical preparation of cyanide-responsive silver chalcogenide membranes are discussed both from theoretical and practical points of view. X-ray diffraction, energy-dispersive x-ray fluorescence microanalysis (EDAX) and scanning electron microscopy (SEM) were used to examine the membrane composition, structure and surface morphology.     

Palladium metal electrode and its analytical application to precipitation and acid–base analysis in aqueous and non-aqueous media

Electrochemical characterization of palladium electrode has been reported. The investigated electrode showed a linear dynamic response for p-toluensulfonic acid and iodide ions in the concentrations range between 5?×?10^?1 and 1?×?10^?5 mol L^?1 with a Nernstian slope of 55 mV for p-toluensulfonic acid and 63 mV per decade for iodide ions in water, as well as 53 mV for p-toluensulfonic acid and 51 mV per decade for iodide ions in dioxane. The response time of the electrodes was less than 10 s in the used solvents. Some potential analytical applications of the sensors have been pointed. Palladium electrode for the potentiometric titrations of acids (citric, barbituric, and p-toluensulfonic acid), bases (N,N’-diphenylguanidine, tributylamine, and 2,2'–bipyridine), halides, and some real samples in aqueous and non-aqueous solutions were studied. Тetrabutylammonium hydroxide, perchloric acid, and silver nitrate proved to be very suitable titrating agents for these titrations. The standard deviation of the determination of the investigated compounds was less than 0.9 % from those obtained with a glass electrode, i.e., silver electrode.     

Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

A Copper(II) Ion‐Selective Potentiometric Sensor Based on N,N′,N″,N′′′‐Tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane in PVC Matrix

The simple PVC‐based membrane containing N,N′,N″,N′′′‐tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane (tpmc) as an ionophore and dibutyl phthalate as a plasticizer, directly coated on a glassy carbon electrode was examined as a new sensor for Cu²⁺ ions. The potential response was linear within the concentration range of 1.0×10^?1–1.0×10^?6 M with a Nernstian slope of 28.8 mV/decade and detection limit of 7.0×10^?7 M. The electrode was used in aqueous solutions over a wide pH range (1.3–6). The sensor exhibited excellent selectivity for Cu²⁺ ion over a number of cations and was successfully used in its determination in real samples.     

Determination of low levels of cyanide with a silver/silver sulphide wire electrode

A silver/silver sulphide electrode is prepred quickly by holding a cleaned silver wire in vapours from molten sulphur. In 1000–10 mg l^?1 cyanide solutions, the electrode exhibits a linear E/log C_CN function which becomes slightly sinusoidal for 10–0.1 mg l^–1 cyanide. The average slope is slightl super-Nerstian (10 mV/decade concentration). The applicability of the electrode is demonstrated for the determinations of microgram quantities of water-soluble cyanide from the Prussian blue pigments which are constituents of externally applied cosmetics. The home-made electrode provides results agreing with those obtained with commercially available electrodes.     

Solid-state ion selective electrode based on polypyrrole conducting polymer nanofilm as a new potentiometric sensor for Zn2+ ion

A pencil graphite electrode (PGE) electrodeposited by a polypyrrole conducting polymer doped with tartrazine (termed as PGE/PPy/Tar) was prepared and used as a zinc (II) solid-state ion-selective electrode. For the preparation of the zinc sensor electrode, electrodeposition of a polypyrrole nanofilm was carried out potentiostatically (E _app?=?0.75 V vs SCE) in a solution containing 0.010 M pyrrole and 0.001 M tartrazine trisodium salt. A pencil graphite and Pt wire were used as working and auxiliary electrodes, respectively. The introduced electrode in the current paper can be fabricated simply and was found to possess high selectivity, exhibited wide working concentration range, sufficiently rapid response, potential stability, and very good sensitivity to Zn (II) ion. The sensor electrode showed a linear Nernstian response over the range of 1.0?×?10^?5 to 1.0?×?10^?1 M with a slope of 28.23 mV per decade change in zinc ion concentration. A detection limit of 8.0?×?10^?6 M was obtained. The optimum pH working of the electrode was found to be 5.0.     

Solid-state ion-selective electrodes for the potentiometric determination of hexacyanoferrate (II)

Hexacyanoferrate(II)-sensing electrodes were prepared by mixing Ag₂S and Ag₄Fe (CN)₆. The 6:1 Ag₂S/Ag₄Fe (CN)₆ provided the best potentiometric response and speed of response. The log concentration vs. potential curves were linear with Nernstian slope (14.8 mV/decade) over the range 10^?1-10^?6 M hexacyanoferrate (II) at pH 7.00 with constant ionic strength. Interferences included iodide, sulfide and bromide. This electrode was used as indicator in potentiometric titrations of hexacyanoferrate (II).     

Micro Solid‐Contact Ion‐Selective Electrode Using a Carbon Nanotube Tower as Ion‐to‐Electron Transducer and Conductive Substrate

Solid contact (SC) ion‐selective electrodes (ISEs) have been recognized as the next generation of ISEs. In this work, the electrical conductivity and mechanical strength of a carbon nanotube (CNT) tower enable it to play the dual roles of transducer and substrate for micro SC‐ISEs. The electrode had a close to Nernstian slope of 35 mV/decade a_Ca2+, a linear range of four orders of magnitude of calcium ion activity (10^?5.6 to 10^?1.8 M), and a detection limit of 1.6×10^?6 M. The simplified fabrication by a one‐step drop casting makes miniaturizing SC‐ISEs and fabricating sensor arrays easier to achieve.     

Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.     

Amineptine Plastic Membrane Electrode Based on its Ion Associate with Tetraphenylborate and Phosphomolybdic Acid

New amineptine hydrochloride (Am-Cl) ion-selective electrodes (conventional type) based on amineptinium-tetraphenylborate (I) and amineptinium-phosphomolybdate (II) were prepared. The electrodes exhibited mean slopes of calibration graphs of 57.9?mV and 53.8?mV per decade of (Am-Cl) concentration at 25?°C for electrodes (I) and (II), respectively. The electrodes can be used within the concentration range 3.16×10^?5?10^?2?M (Am-Cl) at a pH range of 2.0–3.9 for both electrodes. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficients of the electrodes, which were 0.00172?V?°C^?1 and 0.00091 V?°C^?1 for (I) and (II) electrodes, respectively. The electrodes showed a very good selectivity for (Am-Cl) with respect to a number of inorganic cations and sugars. The standard addition method is successfully applied to determine (Am-Cl) in pure solutions and in amineptine-containing tablets.     

Enantioanalysis of Butaclamol Using Enantioselective Potentiometric Electrodes

Abstract

Three enantioselective, potentiometric electrodes were proposed for the enantioanalysis of butaclamol. The electrodes were based on immobilization of maltodextrins (MDs) of different dextrose equivalences [4.0–7.0, I; 13–17, II; 16.5–19.5, III] into carbon paste. The electrodes based on MD I and II were used for the enantioanalysis of S-butaclamol within linear concentration ranges of 10^?10 to 10^?7 and 10^?10 to 10^?8, respectively, with slopes of 51.20 and 57.59 mV/decade of concentration; whereas the electrode based on MD III was used for the enantioanalysis of R-butaclamol within a linear concentration range between 10^?10 and 10^?7 with a slope of 58.50 mV/decade of concentration. Recoveries greater than 90% were recorded for the enantioanalysis of butaclamol in synthetic and urine samples.     

Highly Selective Perchlorate Membrane Electrode Based on Cobalt(III) Schiff Base as a Neutral Carrier

A highly selective poly(vinyl chloride) (PVC) membrane electrode based on Co(III)-Schiff base [Co(5-NO2- Salen)(PBu3)]ClO4•H2O (where 5-NO2-SalenH＝bis(5-nitrosalycilaldehyde)ethylenediamine) as a new carrier for construction of perchlorate-selective electrode by incorporating the membrane ingredients on the surface of a graphite electrodes has been reported. The proposed electrode possesses a very wide Nernestian potential linear range to perchlorate from 1.0×10－6 to 5.0×10－1 mol•L－1 with a slope of (59.4±0.9) mV per decade of perchlorate concentration with a low detection limit of 5.0×10－7 mol•L－1 and good perchlorate selectivity over the wide variety of other anions. The developed electrode has an especially fast response (＜5 s) and a wide pH independent range (3.0—12.0) in comparison with recent reported electrodes and can be used for at least 2 months without any considerable divergence in their potential response. This electrode was used for the determination of perchlorate in river water, drinking water, sludgy water and human urine with satisfactory results without complicated and time consuming pretreatment.     

Mercury ion selective poly(aniline) solid contact electrode based on 2-mercaptobenzimidazol ionophore

A mercury(II) ion selective poly(aniline) solid contact electrode based on 2-mercaptobenzimidazol (2MBI) ionophore as a sulfur containing sensing material was successfully developed. The electrode exhibits a good linear response of 29.1 mV/decade (at 20 ± 0.2°C, r ² = 0.997) within the concentration range of 1 × 10^?2?1 × 10^?7 M Hg(II). The composition of this electrode was: ionophore 0.100, polyvinylchloride (PVC) 0.330, dibutylphthalate (DBP) 0.470, potassiumtetrakis(4-chlorophenyl)borate (KTpCIPB) 0.090, and oleic acid (OA) 0.010. A poly(aniline) solid contact electrode based on 2MBI with DBP and OA plasticizers exhibited the best response characteristics of the results obtained for similarly coated wire type electrodes and solid contact electrodes based on only one DBP plasticizer. The electrode shows good selectivity for mercury(II) ions in comparison with alkali, alkaline earth, transition and heavy metal ions. This electrode is suitable for use with aqueous solutions of pH 3.3?C8.0 and the standard deviation in the measured EMF difference was ±0.5 mV in a mercury nitrate sample solution of 1.0 × 10^?2 M and ±1.1 mV in a mercury nitrate sample solution of 1.0 × 10^?3 M. The stabilization time was less than 15 min and the response time was less than 33 s. The electrode was applied as a sensor for the determination of Hg(II) content in a sea water sample and some amalgam alloys. The results show good correlation with data obtained by atomic absorption spectrometry.     

Zn(II)‐Selective Membrane Electrode Based on Tetraazamacrocycle [Bzo2Me2Ph2(16)hexaeneN4]

A PVC membrane electrode using [Bzo₂Me₂Ph₂(16)hexaeneN₄] ( I ) as ionophore, oleic acid as lipophilic additive and o‐nitrophenyloctyl ether as plasticizer has been investigated as Zn(II)‐selective electrode. The membrane incorporating 34.9% (w/w) PVC, 2.3% I , 4.7% OA and 58.1% o‐NPOE gave linear response over the concentration range 2.82×10^?6?1.0×10^?1 M with a Nernstian slope of 28.5±0.2 mV/decade of concentration with a detection limit of 2.24×10^?6 M (0.146 ppm) and showed a response time of less than 10 s and could be used in pH range 2.5–8.5. High selectivity was obtained over a wide variety of metal ions. The proposed electrode was successfully used as an indicator electrode in potentiometric titration of zinc ions with EDTA and for determination of zinc in real samples.     

Carbon nanotube composite PVC coated stainless steel disc electrode for detection of Ga(III)

This study demonstrates the application of the composite of multi-walled carbon nanotube polyvinylchloride (MWCNT-PVC) based on Bismarck Brown R for gallium sensor. MWCNT has a role to enhance the hydrophobicity of the membrane, which leads to a more stable potential signal. In addition by applying polypyrrol on the surface of this sensor a reduction in the drift of potential occurred and equilibrium potential was achieved faster. Compared to previous studies, using a stainless steel disc instead of a wire electrode causes to obtain an easily and more homogeneous coated electrode. The sensor shows a good Nernstian slope of 19.70?±?0.37?mV?decade^?1 in a wide linear range concentration of 1.0?×?10^?7 to 1.0?×?10^?2?M of Ga(NO₃)₃. The detection limit of this electrode was 7.7?×?10^?8?M of Ga(NO₃)₃. This proposed sensor is applicable in a wide pH range of 2 to 8. It has a short response time of about 8?s and has a good selectivity over twenty four various metal ions. The practical analytical utility of this electrode is demonstrated by measurement of Ga(III) in rock and different water samples.     

Ion Selective Electrodes Based on Brilliant Green Tetrathiocyanatezincate(II)

Abstract

Liquid state, heterogeneous silicone rubber and carbon paste electrodes based on Brilliant green tetrathiocyanatozincate(II) have been prepared and studied. The liquid state electrode, consisting of a 10^?3 M solution of Brilliant green tetrathiocyanatozincate(II) in o-dichlorobenzene supported on lightly cross-linked natural rubber, was the most satisfactory. This electrode responded rapidly when placed in 10^?4 to 10^?1 M solutions of zinc containing a twenty-fold excess of thiocyanate. The potential concentration slope (-29.5 mV per decade change in concentration) was that 2-expected for response to Zn(SON)₄ ²-. The silicone-rubber and carbon paste electrodes also gave near-Nernstian response, but responded more slowly.     

Thiocyanate-selective membrane electrode based on cobalt(III) Schiff base as a charge carrier

A highly selective polyvinylchloride (PVC) membrane electrode based on Schiff base complex i.e. [Cobalt (Salpen) (PBu₃)] ClO4 · H2O (Salpen = bis(salycilaldehyde)propylene diamine) is reported as new carrier for thiocyanate selective electrode by incorporating the membrane ingredients on the surface of graphite electrodes. The proposed electrode possesses a very wide Nernestian linear range to thiocyanate from 1.0 × 10^?6 to 1.0 × 10^?1 M with slope of ?59.05 ± 0.91 mV per decade of thiocyanate concentration, very low detection limit (8.0 × 10^?7 M) and good thiocyanate selectivity over the wide variety of other anions. Fast and stable response, good reproducibility, long-term stability, applicability over a wide pH range (2.8–9.8) are advantages of the reported electrode. The sensor has a response time of <5 s and can be used for at least 14 weeks without any considerable change in respective potential response. The proposed electrode was used for the determination of thiocyanate in saliva, wastewater and human urine with satisfactory results and good agreement with colorimetric as reference method.     

Efficient Synthesis of a New Podand and Application as a Suitable Carrier for Silver Ion‐Selective Electrode

A new podand of 1,1′‐thia‐bis‐[1‐(chloroethan‐2‐acetamid‐α‐oxy)] naphtol was synthesized and used as a suitable carrier for Ag⁺ PVC membrane electrode. The electrode exhibited linear response with a Nernstian slope of (59.5±0.8 mV/decade) within a wide concentration range of 1.0×10^?7 to 1.5×10^?2 mol L^?1 silver ions. The electrode had a fast response time of <10 s and detection limit of 8.6×10^?8 mol L^?1 with a working pH range from 3.7 to 9.0. The electrode was highly selective for Ag(I) ions over a large number of cations such as alkali, alkaline earth, and heavy metal ions. The proposed sensor has been applied as an indicator electrode for indirect determination of vitamin B₁ in tablets by determination of Cl^? ions in this compound with a standard solution of Ag(NO₃).     

Copper(II) Ion‐Selective Electrodes Based on Dithiosalicylic and Thiosalicylic Acids

Potentiometric carbon paste electrodes for copper(II) based on dithiosalicylic and thiosalicylic acids are described. The sensor based on dithiosalicylic acid (DTS) exhibits a linear response with a nearly Nernstian slope of 27.7 mV per decade, whereas the electrode based on thiosalicylic acid (TS) shows a super‐Nernstian slope. The limits of detection for the DTS sensor and the TS sensor are 10^?7.9and 10^?6.3 M for copper(II) activity, respectively. Selectivity coefficients are tabulated, and the influence of the pH on the response of these ISEs is studied. The DTS electrode is successfully used for potentiometric titration of humic acids with copper in order to get more information about complexing properties of these acids.