Cationic organoiron polyelectrolyte three‐arm stars

With nucleophilic aromatic substitution and ester condensation reactions, several new first‐generation dendrimers and star‐shaped molecules containing cationic cyclopentadienyl iron moieties were prepared. Although the solubility of the organoiron star‐shaped molecules with ether bridges in polar solvents was found to decrease with an increase in the size of the molecule, the addition of ester linkages resulted in a sharp decrease in the solubility, regardless of the size. The thermal behavior of these molecules was examined with differential scanning calorimetry and thermogravimetric analysis. The glass‐transition temperatures (T_g's) of these star‐shaped molecules ranged from 123 to 170 °C. However, the addition of the ester functionality allowed for an increase in the T_g's to 151–194 °C. The star‐shaped molecules were thermally stable up to 200 °C, above which a loss of the cationic cyclopentadienyl iron moieties occurred. Degradation of the ester chains started at 321 °C, and degradation of the ether chains started at 408 °C. Electrochemical studies of the ether star‐shaped molecules showed a reduction of the 18‐electron iron centers to 19‐electron centers. This redox system was reversible at low temperatures, whereas it was irreversible at room temperature. Moreover, an increase in the number of metal moieties caused an overlap and broadening of the redox wave. Viscosity studies showed a polyelectrolyte effect for the organoiron star‐shaped molecules. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1382–1396, 2005     

Star‐shaped polymers having side chain poss groups for solid polymer electrolytes; synthesis,thermal behavior,dimensional stability,and ionic conductivity

A series of organic/inorganic hybrid star‐shaped polymers were synthesized by atom transfer radical polymerization using 3‐(3,5,7,9,11,13,15‐heptacyclohexyl‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxane‐1‐yl)propyl methacrylate (MA‐POSS) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as monomers and octakis(2‐bromo‐2‐methylpropionoxypropyldimethylsiloxy)octasilsesquioxane as an initiator. Star‐shaped polymers with methyl methacrylate (MMA) and PEGMA moieties were also prepared for comparison purposes. Dimensionally stable freestanding film could be obtained from the hybrid star‐shaped polymer containing 26 wt % of MA‐POSS moieties although its glass transition temperature is very low, ?60.9 °C. As a result, the hybrid star‐shaped polymer electrolyte containing lithium bis(trifluoromethanesulfonyl)imide showed ionic conductivities (1.75 × 10^?5 S/cm at 30 °C), which were two orders of magnitude higher than those of the star‐shaped polymer electrolyte with MMA moieties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile one‐shot synthesis of functional star‐shaped polymers by domino‐type living cationic copolymerization

This article describes the syntheses of various functional star‐shaped polymers via monomer‐selective living cationic polymerization of a vinyl ether (VE) and a divinyl compound with alkoxystyrene moieties by a one‐shot method. An aqueous solution of the resulting star‐shaped polymers with oxyethylene pendants exhibits thermally induced phase separation behavior. To achieve domino synthesis from various monomers, we investigated the optimum reactivity difference using a functional VE and a monofunctional alkoxystyrene. Moreover, the one‐shot copolymerization of a bifunctional VE and an alkoxystyrene is also conducted to yield a star‐shaped polymer via the core‐first method. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2166–2174     

Nano‐Star‐Shaped Polymers for Drug Delivery Applications

With the advancement of polymer engineering, complex star‐shaped polymer architectures can be synthesized with ease, bringing about a host of unique properties and applications. The polymer arms can be functionalized with different chemical groups to fine‐tune the response behavior or be endowed with targeting ligands or stimuli responsive moieties to control its physicochemical behavior and self‐organization in solution. Rheological properties of these solutions can be modulated, which also facilitates the control of the diffusion of the drug from these star‐based nanocarriers. However, these star‐shaped polymers designed for drug delivery are still in a very early stage of development. Due to the sheer diversity of macromolecules that can take on the star architectures and the various combinations of functional groups that can be cross‐linked together, there remain many structure–property relationships which have yet to be fully established. This review aims to provide an introductory perspective on the basic synthetic methods of star‐shaped polymers, the properties which can be controlled by the unique architecture, and also recent advances in drug delivery applications related to these star candidates.     

Molecular dynamics of star‐shaped poly(L‐lactide)s in tetrahydrofuran as solvent monitored by fluorescence spectroscopy

Linear telechelic, α,ω‐ditelechelic, and star‐shaped tri‐, tetra‐, penta‐, and hexa‐arm poly(L ‐lactide)s (PLAs) fitted at every arm with pyrene end group have been prepared. Internal dynamics and mobility of the PLA chains in tetrahydrofuran solution at 25 °C, with regard to the number of PLA arms in one macromolecule and the individual arm average degree of polymerization, was followed by fluorescence spectroscopy. Analysis of both static and time‐resolved spectra of the star‐shaped polymers revealed dynamic segmental motion resulting in end‐to‐end cyclization, accompanied by an excimer formation. Probability and rate of the latter reaction increased with increasing number of arms and with decreasing their polymerization degree. Moreover, time‐resolved measurements revealed that for macromolecules containing few arms (2 or 3) the pyrene moieties are located in the interior of the star‐shaped PLAs, whereas in the instance of the higher number of arms (4–6) they are located at the periphery of the star‐shaped PLAs. Thus, increasing the number of arms leads to their stretching away from the center of the star‐shaped PLA macromolecule. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4586–4599, 2005     

Novel Approach to Oligomers and Polymers Containing Neutral and Cationic Iron Moieties Within and Pendent to Their Backbones

Polymers containing neutral and cationic iron moieties within and pendent to their backbones were prepared. The redox properties of the neutral and cationic iron centers were examined using cyclic voltammetry. Photolysis of the organometallic polymers led to decoordination of the cationic cyclopentadienyliron moieties from the polymer backbones. Glass transition temperatures of the resulting ferrocene‐based polymers were lower than those of the mixed neutral/cationic polymers.     

Star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one): Synthesis and characterization

New star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one) (PDXO) has been synthesized through ring‐opening polymerization initiated by SnOct₂/pentaerythritol. The star‐shaped PDXO was end‐functionalized by acrolyol chloride to form acrylate end groups. The end‐functionalized PDXO was photocrosslinked initiated by 2,2‐dimethoxy‐2‐phenylacetophenone. The gel content ranged from 80 to 99%, indicating a high degree of crosslinking. The thermal properties of the star‐shaped PDXO and the photocrosslinked PDXO were analyzed by differential scanning calorimetry. The glass‐transition temperature was determined to approximately ?32 °C for the crosslinked PDXO. The viscosity numbers were determined for star‐shaped PDXO, with reference to linear homologues. The star‐shaped PDXO had lower viscosity numbers than the linear counterparts. The crosslinked PDXO showed a rather hydrophilic surface as compared with other resorbable polyesters. The advancing contact angle was 64 ± 2, and the receding angle was 57 ± 4. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2049–2054, 2002     

Synthesis of substituted norbornenes and their polymerization to polynorbornenes with flexible aliphatic side‐chains

Synthesis and characterization of new thermally stable polynorbornenes functionalized with pendent flexible side‐chains are reported. The flexible side‐chains with terminal hydroxy groups were synthesized via S_NAr reactions of cyclopentadienyliron‐complexed chlorobenzenes with aliphatic diols. Condensation of these side‐chains with exo,endo‐5‐norbornene‐2‐carboxylic acid led to the formation of substituted monomers which were characterized using one‐ and two‐dimensional NMR techniques. Ring‐opening metathesis polymerization of these monomers yielded polynorbornenes with pendent side‐chains.     

2,4-二氰基-3-二乙基氨基-9,9-二乙基芴基星状蓝色发光化合物的合成与性质

本文设计合成了两个新的星状分子1和2,它们分别含有一个三苯胺和苯环的核,并都以三个2,4-二氰基-3-二乙氨基-9,9-二乙基芴为端基。光学性质研究表明,这两个具有D-A结构的化合物都显示出分子内电荷转移的性质。化合物1在强极性溶剂中表现出了双荧光发射特性。这两个化合物还显示出中等强度的荧光和高的热稳定性,这预示了它们在蓝色荧光材料方面的应用潜力。     

Structural effect of linear and star‐shaped poly(L‐lactic acid) on physical properties

The linear and star‐shaped poly(L‐lactic acid) (PLLA) with similar molecular weight were prepared and their physical properties such as thermal properties, rheological properties, and crystallization behavior in quiescent and dynamic states were compared. The differential scanning calorimetry showed that the linear PLLA gave higher glass transition, melting, and crystallization temperatures than the star‐shaped one. In dynamic crystallization, the linear PLLA gave longer induction time and longer overall crystallization time than the star‐shaped one, although the former gave higher rate of crystallization in quiescent crystallization. However, wide‐angle X‐ray diffractometer(WAXD) analysis revealed that the linear and star‐shaped PLLA developed the same crystal structure and application of shear had little effect on crystal structure. As predicted, the linear PLLA gave higher crystallinity than the star‐shaped PLLA. In the dilute solutions, the linear PLLA exhibited higher intrinsic viscosity than the star‐shaped one. In the concentrated solutions, the star‐shaped PLLA gave higher values of dynamic viscosity, storage, and loss moduli than the linear one. Further, the former exhibited more noticeable shear thinning behavior and greater dependence of rheological properties on temperature than the latter. For both PLLA melts, the modified Cole–Cole plot gave slope less than 2. Of two PLLA polymers the star‐shaped PLLA gave smaller slope than the linear one. In addition, the former showed greater change of the slope with temperature than the latter. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 939–946, 2004     

Synthesis of sulfone-containing monomers and polymers using cationic cyclopentadienyliron complexes

The synthesis of sulfone-containing monomers with pendent cationic cyclopentadienyliron (CpFe⁺) moieties has been accomplished via nucleophilic aromatic substitution of dichloroarene complexes with a number aliphatic dithiols. These complexes were further oxidized using m-CPBA to give the sulfone-based monomers. Polymerization of the sulfone-based monomers with O-containing nucleophiles produced the sulfone-based polymers. Direct nucleophilic aromatic substitution of dichloroarene complexes with dinucleophiles allowed for the formation of organoiron sulfide-based polymers. Oxidation of these polymers led to the formation of sulfone polymers with the pendent iron moieties. The organometallic monomers and polymers were found to be more soluble in polar solvents in comparison to their organic analogues.     

Synthesis and characterization of six‐arm star polystyrene‐block‐poly (3‐hexylthiophene) copolymer by combination of atom transfer radical polymerization and click reaction

A novel six‐arm star block copolymer comprising polystyrene (PS) linked to the center and π‐conjugated poly (3‐hexylthiophene) (P3HT) was successfully synthesized using a combination of atom transfer radical polymerization (ATRP) and click reaction. First, star‐shaped PS with six arms was prepared via ATRP of styrene with the discotic six‐functional initiator, 2,3,6,7,10,11‐hexakis(2‐bromoisobutyryloxy)triphenylene. Next, the terminal bromides of the star‐shaped PS were substituted with azide groups. Afterward, the six‐arm star block copolymer PS‐b‐P3HT was prepared using the click coupling reaction of azide‐terminated star‐shaped PS with alkynyl‐terminated P3HT. Various techniques including ¹H NMR, Fourier‐transform infrared and size‐exclusion chromatography were applied to characterize the chemical structures of the intermediates and the target block copolymers. Their thermal behaviors and optical properties were investigated using differential scanning calorimetry and UV–vis spectroscopy. Moreover, atomic force microscopy (AFM) was utilized to observe the morphology of the star block copolymer films. In comparison with two linear diblock copolymer counterparts, AFM results reveal the effect of the star block copolymer architecture on the microphase separation‐induced morphology in thin films. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,micellization and gelation of temperature‐responsive star‐shaped block copolymers

A series of amphiphilic temperature‐responsive star‐shaped poly(D,L‐lactic‐co‐glycolic acid)‐b‐methoxy poly(ethylene glycol) (PLGA‐mPEG) block copolymers with different arm numbers were synthesized via the arm‐first method. Gel permeation chromatography data confirmed that star‐shaped PLGA‐mPEG copolymers had narrow polydispersity index, indicating the successful formation of star‐shaped block copolymers. Indirectly, the ¹H NMR spectra in two kinds of solvents and dye solubilization method had confirmed the formation of core‐shell micelles. Further, core‐shell micelles with sizes of about 30–50 nm were directly observed by transmission electron microscopy. Subsequently, the micellar sizes and distributions as a function of concentrations and temperature were measured. At various copolymer concentrations, individual micelles with size of 20–40 nm and grouped micelles with size of 600–700 nm were found. Micellar mechanism of star‐shaped block copolymers in aqueous solution was simultaneously discussed. In addition, sol–gel transition of star‐shaped block copolymers in water was also investigated via the inverting test method. The critical gel temperature (CGT) and critical gel concentration (CGC) values of two‐arm, three‐arm and four‐arm copolymer solutions were markedly higher than ones of one‐arm copolymer. Moreover, the same CGC values of copolymer solution with different molecular weight and the same arm composition were ~15 wt %, and CGT values increased from ~38 to ~47°C with increasing arm numbers. Finally, the temperature‐dependent micellar packing gelation mechanism of star‐shaped block copolymer was schematically illustrated. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of thermo‐responsive 4‐arm star‐shaped porphyrin‐centered poly(N,N‐diethylacrylamide) via reversible addition‐fragmentation chain transfer radical polymerization

Tetrafunctional porphyrins‐containing trithiocarbonate groups were synthesized by an ordinary esterification method. This tetrafunctional porphyrin (TPP‐CTA) could be used as a chain transfer agent in a controlled reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to prepare well‐defined 4‐arm star‐shaped polymers. N,N‐Diethylacrylamide was polymerized using TPP‐CTA in 1,4‐dioxane. Poly(N,N‐diethylacrylamide) (PDEA) is known to be a thermo‐responsive polymer, and exhibits a lower critical solution temperature (LCST) in water. The star‐shaped PDEA polymer (TPP‐PDEA) was therefore also thermo‐responsive, as expected. The LCST of this polymer depended on its concentration in water, as confirmed by turbidity, dynamic light scattering (DLS), static light scattering (SLS), and ¹H NMR measurements. The porphyrin cores were compartmentalized in PDEA shells in aqueous media. Below the LCST, the fluorescence intensity of TPP‐PDEA was about six times larger than that of a water‐soluble low molecular weight porphyrin compound (TSPP), whose fluorescence intensity was independent of temperature. Above the LCST, the fluorescence intensity of TPP‐PDEA decreased, while the intensity was about three times higher than that of TSPP. These observations suggested that interpolymer aggregation occurred due to the hydrophobic interactions of the dehydrated PDEA arm chains above the LCST, with self‐quenching of the porphyrin moieties arising from these interactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis and characterization of “Living” star‐shaped poly(N‐vinylcaprolactam) with four arms and carboxylic acid end groups

Poly(N‐vinylcaprolactam) (PNVCL) star‐shaped polymers with four arms and carboxyl end groups were synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization of N‐vinylcaprolactam (NVCL) employing a tetrafunctional trithiocarbonate as an R‐RAFT agent. The resulting star polymers were characterized using ¹H NMR, FT‐IR, gel permeation chromatography (GPC), and UV–vis. Molecular weight of star polymers were analyzed by GPC and UV–vis being observed that the values obtained were very similar. Furthermore, the thermosensitive behavior of the star polymers was studied in aqueous solution by measuring the lower critical solution temperature by dynamic light scattering. Star‐shaped PNVCL were chain extended with ethyl‐hexyl acrylate (EHA) to yield star PNVCL‐b‐PEHA copolymers with an EHA molar content between 4% and 6% proving the living character of the star‐shaped macroCTA. These star block copolymers form aggregates in aqueous solutions with a hydrodynamic diameter ranged from 170 to 225 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2156–2165     

Solution‐Processed Bulk‐Heterojunction Photovoltaic Cells Based on Dendritic and Star‐Shaped D‐π‐A Organic Dyes

A series of D ‐π‐A organic dendritic and star‐shaped molecules based on three various chromophores (i.e., the truxene nodes, triphenylamine moieties as the donor, and benzothiadiazole chromophore as the acceptor) and their corresponding model compounds are facilely developed. Their photophysical and electrochemical properties are investigated in detail by UV/Vis absorption and photoluminescent spectroscopy, and cyclic voltammetry. By changing the various conjugated spacers (i.e., single bond, double bond, and triple bond) among the three chromophores of dendritic series, their photophysical properties (that is, the one‐photon absorption range and two‐photon absorption cross‐section values) are effectively modulated. All D ‐π‐A conjugated oligomers show a broad and strong absorption band from 250 to 700 nm in thin films. Solution‐processed bulk‐heterojunction photovoltaic devices using our oligomer as donor and PCBM as acceptor are fabricated and measured. The power conversion efficiency of the devices based on our oligomers continuously increases from DBTTr to TRTD2A as a result of an increasing relative absorption intensity in longer wavelength region by changing the donor‐acceptor ratio and conjugated spacers between the donor and acceptor. The power conversion efficiency of the devices based on TRTD2A was 0.54 % under the illumination of AM 1.5 and 100 mW cm^?2, which is the highest value recorded based on D ‐π‐A conjugated oligomers containing triphenylamine moieties and benzothiadiazole chromophores with truxene to date.     

Synthesis,characterization, and fluorescence of pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer with pentaerythritol core

Novel and well‐defined pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymers were successfully achieved by combination of esterification, atom transfer radical polymerization (ATRP), divergent reaction, ring‐opening polymerization (ROP), and coupling reaction on the basis of pentaerythritol. The reaction of pentaerythritol with 2‐bromopropionyl bromide permitted ATRP of styrene (St) to form four‐arm star‐shaped polymer (PSt‐Br)₄. The molecular weights of these polymers could be adjusted by the variation of monomer conversion. Eight‐hydroxyl star‐shaped polymer (PSt‐(OH)₂)₄ was produced by the divergent reaction of (PSt‐Br)₄ with diethanolamine. (PSt‐(OH)₂)₄ was used as the initiator for ROP of ε‐caprolactone (CL) to produce eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL)₂)₄. The molecular weights of (PSt‐b‐(PCL)₂)₄ increased linearly with the increase of monomer. After the coupling reaction of hydroxyl‐terminated (PSt‐b‐(PCL)₂)₄ with 1‐pyrenebutyric acid, pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL‐pyrene)₂)₄ was obtained. The eight‐arm star‐shaped dendrimer‐like copolymers presented unique thermal properties and crystalline morphologies, which were different from those of linear poly(ε‐caprolactone) (PCL). Fluorescence analysis indicated that (PSt‐b‐(PCL‐pyrene)₂)₄ presented slightly stronger fluorescence intensity than 1‐pyrenebutyric acid when the pyrene concentration of them was the same. The obtained pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer has potential applications in biological fluorescent probe, photodynamic therapy, and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2788–2798, 2008     

Synthesis of pyridoxine‐based eagle‐shaped asymmetric star polymers through seATRP

The vitamin B₆‐based macroinitiator was prepared for the first time by the transesterification reaction of pyridoxine with 2‐bromoisobutyryl bromide. A pyridoxine‐based star‐shaped block copolymer with a hydrophilic pyridoxine core and a dual hydrophilic poly(2‐(dimethylamino)ethyl methacrylate)‐block‐poly(N‐isopropylacrylamide) arms was synthesized for the first time via a simplified electrochemically mediated atom transfer radical polymerization, utilizing only 20 ppm of catalyst complex. The rate of the polymerizations was controlled by applying appropriate potential/current values during electrolysis to prevent the possibility of intermolecular coupling of the polymer stars. The asymmetric star polymers showed narrow molecular weight distribution (?  = 1.09–1.13). ¹H NMR spectral results confirm the formation of star‐like block (co)polymers. These new vitamin B₆‐based eagle‐shaped star (co)polymers may find biomedical and biosensor applications as pH‐sensitive and thermo‐sensitive drug delivery systems. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis of star‐shaped polystyrenes via nitroxide‐mediated stable free‐radical polymerization

High molecular weight star‐shaped polystyrenes were prepared via the coupling of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) terminated polystyrene oligomers with divinylbenzene (DVB) in m‐xylene at 138 °C. The optimum ratio of the coupling solvent (m‐xylene) to divinylbenzene was determined to be 9 to 1 based on volume. Linear polystyrene oligomers (M_n = 19,300 g/mol, M_w/M_n = 1.10) were prepared in bulk styrene using benzoyl peroxide in the presence of TEMPO at approximately 130 °C under an inert atmosphere. Coupling of the TEMPO‐terminated oligomers under optimum conditions resulted in a product with a number average molecular weight exceeding 300,000 g/mol (M_w/M_n = 3.03) after 24 h, suggesting the formation of relatively well‐defined star‐shaped polymers. Additionally, the intrinsic viscosities of the star‐shaped products were lower than calculated values for linear analogs of equivalent molecular weight, which further supported the formation of a star‐shaped architecture. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 216–223, 2001     

Synthesis and characterization of 4‐arm star side‐chain liquid crystalline polymers containing azobenzene with different terminal substituents via ATRP

4‐Arm star side‐chain liquid crystalline (LC) polymers containing azobenzene with different terminal substituents were synthesized by atom transfer radical polymerization (ATRP). Tetrafunctional initiator prepared by the esterification between pentaerythritol and 2‐bromoisobutyryl bromide was utilized to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) and 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate (EMAzo), respectively. The 4‐arm star side‐chain LC polymer with p‐methoxyazobenzene moieties exhibits a smectic and a nematic phase, while that with p‐ethoxyazobenzene moieties shows only a nematic phase, which derives of different terminal substituents. The star polymers have similar LC behavior to the corresponding linear homopolymers, whereas transition temperatures decrease slightly. Both star polymers show photoresponsive isomerization under the irradiation with UV–vis light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3342–3348, 2007