Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.     

A novel conjugated porous polymer based on triazine and imide as cathodes for sodium storage

Organic electrode materials have attracted more and more attention for sodium-ion batteries (SIBs) that are regarded as one of the most promising alternatives of lithium-ion batteries, because they can endure the storage of large sodium ions (with a larger radius than that of lithium ions) without obvious volume change. Herein, we report a novel conjugated porous polymer (TPIP) based on triazine and imide as cathodes material for SIBs. TPIP has abundant redox-active sites, good thermal stability (400°C) and large specific surface area (306 m² g⁻¹). As a result, TPIP electrode delivered a specific capacity of 120 mAh g⁻¹ after 50 cycles at a current density of 0.1 A g⁻¹ and 85 mAh g⁻¹ after 150 cycles at a current density of 1.0 A g⁻¹. Ex-situ X-ray photoelectron spectra and Fourier transform infrared spectra showed that the TPIP electrodes reversibly stored three sodium ions per unit through the triazine rings and half of the carbonyl groups. These results deepen our understanding of charge storage mechanisms of polymers with triazine and imide units and will provide guidance for the future design of electrode materials for high-performance SIBs.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

In Situ Nitrogen Retention of Carbon Anode for Enhancing the Electrochemical Performance for Sodium-Ion Battery

Retaining nitrogen for polyacrylonitrile (PAN) based carbon anode is a cost-effective way to make full use of the advantages of PAN for sodium-ion batteries (SIBs). Here, a simple strategy has been successfully adopted to retain N atoms in situ and increase production yield of a novel composite PAZ by mixing 3 wt % of zinc borate (ZB) with poly (acrylonitrile-co-itaconic acid) (PANIA). Among the prepared carbonised fibre (CF) samples, PAZ-CF-700 maintains the highest N content, retaining 90 % of the original N from PANIA. It represents the highest capacity storage contribution (80.55 %) and the lowest impedance R_ct (117 Ω). Consequently, the specific capacity increases from 60 mAh g⁻¹ of PANIA-CF-700 to 190 mAh g⁻¹ of PAZ-CF-700 at a current density of 100 mA g⁻¹. At the same time, PAZ-CF-700 exhibits a good rate performance and excellent long-term cycling stability with a specific capacity of 94 mAh g⁻¹ after 4000 cycles at 1.6 A g⁻¹.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High-Energy Sodium-Ion Batteries

Although sodium-ion batteries (SIBs) are considered as alternatives to lithium-ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8-tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox-active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

Nanowire of WP as a High-Performance Anode Material for Sodium-Ion Batteries

The design and development of electrode materials with high specific capacity and long cycling life for sodium-ion batteries (SIBs) is still a critical challenge. In this communication, we report the development of tungsten phosphide (WP) nanowire on carbon cloth (WP/CC) as an anode for SIBs. The WP/CC exhibits superior sodium storage capability with 502 mA h g⁻¹ at 0.1 A g⁻¹. Moreover, this anode is capable of delivering a long lifespan at 2 A g⁻¹ with an excellent capacity retention of 99 % after 1000 cycles.     

Rechargeable Sodium-Ion Battery Based on Polyazaacene Analogue Anode

The high theoretical specific capacity, strong structural designability and relatively inexpensive manufacturing cost make the exploration of organic electrode materials more attractive in recent years. In this article, owing to the large π-conjugated structure, plenty of nitrogen heteroatoms and multiring aromatic system, polyazaacene analogue poly(1,6-dihydropyrazino[2,3 g]quinoxaline-2,3,8-triyl-7-(2H)-ylidene-7,8-dimethylidene) (PQL) was applied as the anode in sodium-ion batteries (SIBs). PQL was almost insoluble in conventional liquid organic electrolyte (1 M NaClO₄ in ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v=1 : 1) with 5 % fluoroethylene carbonate (FEC)), which strongly improved its cycle stability. The initial discharge capacity was obtained to be 1825 mAh g⁻¹ at the current density of 100 mA g⁻¹ and stabilized at 317 mAh g⁻¹ after 400 cycles with the coulombic efficiency as high as 97 %. It not only showed good rate capability at high current densities (202, 183 mAh g⁻¹ at 1 A g⁻¹ and 1.5 A g⁻¹) but also had a superior energy density around 290 Wh kg⁻¹.     

Isomer Effect on Energy Storage of π-Extended S-Shaped Double[6]Heterohelicene

Recently, chiral and nonplanar cutouts of graphene have been the favorites due to their unique optical, electronic, and redox properties and high solubility compared with their planar counterparts. Despite the remarkable progress in helicenes, π-extended heterohelicenes have not been widely explored. As an anode in a lithium-ion battery, the racemic mixture of π-extended double heterohelical nanographene containing thienothiophene core exhibited a high lithium storage capability, attaining a specific capacity of 424 mAh g⁻¹ at 0.1 A g⁻¹ with excellent rate capability and superior long-term cycling performance over 6000 cycles with negligible fade. As a first report, the π-extended helicene isomer (PP and MM), with the more interlayer distance that helps faster diffusion of ions, has exhibited a high capacity of 300 mAh g⁻¹ at 2 A g⁻¹ with long-term cycling performance over 1500 cycles compared to the less performing MP and PM isomer and racemic mixture (150 mAh g⁻¹ at 2 A g⁻¹). As supported by single-crystal X-ray analysis, a unique molecular design of nanographenes with a fixed (helical) molecular geometry, avoiding restacking of the layers, renders better performance as an anode in lithium-ion batteries. Interestingly, the recycled nanographene anode material displayed comparable performance.     

Importing Tin Nanoparticles into Biomass-Derived Silicon Oxycarbides with High-Rate Cycling Capability Based on Supercritical Fluid Technology

Silicon oxycarbides (SiOC) are regarded as potential anode materials for lithium-ion batteries, although inferior cycling stability and rate performance greatly limit their practical applications. Herein, amorphous SiOC is synthesized from Chlorella by means of a biotemplate method based on supercritical fluid technology. On this basis, tin particles with sizes of several nanometers are introduced into the SiOC matrix through the biosorption feature of Chlorella. As lithium-ion battery anodes, SiOC and Sn@SiOC can deliver reversible capacities of 440 and 502 mAh g⁻¹ after 300 cycles at 100 mA g⁻¹ with great cycling stability. Furthermore, as-synthesized Sn@SiOC presents an excellent high-rate cycling capability, which exhibits a reversible capacity of 209 mAh g⁻¹ after 800 cycles at 5000 mA g⁻¹; this is 1.6 times higher than that of SiOC. Such a novel approach has significance for the preparation of high-performance SiOC-based anodes.     

Amorphous MnO2 as Cathode Material for Sodium‐ion Batteries

Amorphous MnO₂ has been prepared from the reduction of KMnO₄ in ethanol media by a facile one‐step wet chemical route at room temperature. The electrochemical properties of amorphous MnO₂ as cathode material in sodium‐ion batteries (SIBs ) are studied by galvanostatic charge/discharge testing. And the structure and morphologies of amorphous MnO₂ are investigated by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), transmission electron microscopy (TEM ) and Raman spectra. The results reveal that as‐synthesized amorphous MnO₂ electrode material exhibits a spherical morphology with a diameter between 20 and 60 nm. The first specific discharge capacity of the amorphous MnO₂ electrode is 123.2 mAh •g⁻¹ and remains 136.8 mAh •g⁻¹ after 100 cycles at the current rate of 0.1 C. The specific discharge capacity of amorphous MnO₂ is maintained at 139.2, 120.4, 89, 68 and 47 mAh •g⁻¹ at the current rate of 0.1 C, 0.2 C, 0.5 C, 1 C and 2 C, respectively. The results indicate that amorphous MnO₂ has great potential as a promising cathode material for SIBs .     

Bismuth Nanoparticles Embedded in Carbon Spheres as Anode Materials for Sodium/Lithium‐Ion Batteries

Sodium‐ion batteries (SIBs) are regarded as an attractive alternative to lithium‐ion batteries (LIBs) for large‐scale commercial applications, because of the abundant terrestrial reserves of sodium. Exporting suitable anode materials is the key to the development of SIBs and LIBs. In this contribution, we report on the fabrication of Bi@C microspheres using aerosol spray pyrolysis technique. When used as SIBs anode materials, the Bi@C microsphere delivered a high capacity of 123.5 mAh g^?1 after 100 cycles at 100 mA g^?1. The rate performance is also impressive (specific capacities of 299, 252, 192, 141, and 90 mAh g^?1 are obtained under current densities of 0.1, 0.2, 0.5, 1, and 2 A g^?1, respectively). Furthermore, the Bi@C microsphere also proved to be suitable LIB anode materials. The excellent electrochemical performance for both SIBs and LIBs can attributed to the Bi@C microsphere structure with Bi nanoparticles uniformly dispersed in carbon spheres.     

Study of the Lithium Storage Mechanism of N-Doped Carbon-Modified Cu2S Electrodes for Lithium-Ion Batteries

Owing to their high specific capacity and abundant reserve, Cu_xS compounds are promising electrode materials for lithium-ion batteries (LIBs). Carbon compositing could stabilize the Cu_xS structure and repress capacity fading during the electrochemical cycling, but the corresponding Li⁺ storage mechanism and stabilization effect should be further clarified. In this study, nanoscale Cu₂S was synthesized by CuS co-precipitation and thermal reduction with polyelectrolytes. High-temperature synchrotron radiation diffraction was used to monitor the thermal reduction process. During the first cycle, the conversion mechanism upon lithium storage in the Cu₂S/carbon was elucidated by operando synchrotron radiation diffraction and in situ X-ray absorption spectroscopy. The N-doped carbon-composited Cu₂S (Cu₂S/C) exhibits an initial discharge capacity of 425 mAh g⁻¹ at 0.1 A g⁻¹, with a higher, long-term capacity of 523 mAh g⁻¹ at 0.1 A g⁻¹ after 200 cycles; in contrast, the bare CuS electrode exhibits 123 mAh g⁻¹ after 200 cycles. Multiple-scan cyclic voltammetry proves that extra Li⁺ storage can mainly be ascribed to the contribution of the capacitive storage.     

Cyclotetrabenzil Derivatives for Electrochemical Lithium-Ion Storage

Organic electrode materials could revolutionize batteries because of their high energy densities, the use of Earth-abundant elements, and structural diversity which allows fine-tuning of electrochemical properties. However, small organic molecules and intermediates formed during their redox cycling in lithium-ion batteries (LIBs) have high solubility in organic electrolytes, leading to rapid decay of cycling performance. We report the use of three cyclotetrabenzil octaketone macrocycles as cathode materials for LIBs. The rigid and insoluble naphthalene-based cyclotetrabenzil reversibly accepts eight electrons in a two-step process with a specific capacity of 279 mAh g⁻¹ and a stable cycling performance with ≈65 % capacity retention after 135 cycles. DFT calculations indicate that its reduction increases both ring strain and ring rigidity, as demonstrated by computed high distortion energies, repulsive regions in NCI plots, and close [C⋅⋅⋅C] contacts between the naphthalenes. This work highlights the importance of shape-persistency and ring strain in the design of redox-active macrocycles that maintain very low solubility in various redox states.     

Catalytically Active CoSe2 Supported on Nitrogen-Doped Three Dimensional Porous Carbon as a Cathode for Highly Stable Lithium-Sulfur Battery

Lithium-sulfur batteries are promising secondary energy storage devices that are mainly limited by its unsatisfactory cyclability owing to inefficient reversible conversion of sulfur and lithium sulfide on the cathode during the discharge/charging process. In this study, nitrogen-doped three-dimensional porous carbon material loaded with CoSe₂ nanoparticles (CoSe₂-PNC) is developed as a cathode for lithium-sulfur battery. A combination of CoSe₂ and nitrogen-doped porous carbon can efficiently improve the cathode activity and its conductivity, resulting in enhanced redox kinetics of the charge/discharge process. The obtained electrode exhibits a high discharge specific capacity of 1139.6 mAh g⁻¹ at a current density of 0.2 C. After 100 cycles, its capacity remained at 865.7 mAh g⁻¹ thus corresponding to a capacity retention of 75.97 %. In a long-term cycling test, discharge specific capacity of 546.7 mAh g⁻¹ was observed after 300 cycles performed at a current density of 1 C.     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.     

Sn Anodes Protected by Intermetallic FeSn2 Layers for Long-lifespan Sodium-ion Batteries with High Initial Coulombic Efficiency of 93.8 %

With a theoretical capacity of 847 mAh g⁻¹, Sn has emerged as promising anode material for sodium-ion batteries (SIBs). However, enormous volume expansion and agglomeration of nano Sn lead to low Coulombic efficiency and poor cycling stability. Herein, an intermetallic FeSn₂ layer is designed via thermal reduction of polymer-Fe₂O₃ coated hollow SnO₂ spheres to construct a yolk-shell structured Sn/FeSn₂@C. The FeSn₂ layer can relieve internal stress, avoid the agglomeration of Sn to accelerate the Na⁺ transport, and enable fast electronic conduction, which endows quick electrochemical dynamics and long-term stability. As a result, the Sn/FeSn₂@C anode exhibits high initial Coulombic efficiency (ICE=93.8 %) and a high reversible capacity of 409 mAh g⁻¹ at 1 A g⁻¹ after 1500 cycles, corresponding to an 80 % capacity retention. In addition, NVP//Sn/FeSn₂@C sodium-ion full cell shows outstanding cycle stability (capacity retaining rate of 89.7 % after 200 cycles at 1 C).     

Sulfur-/Nitrogen-Rich Albumen Derived “Self-Doping” Graphene for Sodium-Ion Storage

The development of sodium-ion batteries (SIBs) is hindered by the rapid reduction in reversible capacity of carbon-based anode materials. Outside-in doping of carbon-based anodes has been extensively explored. Nickel and NiS₂ particles embedded in nitrogen and sulfur codoped porous graphene can significantly improve the electrochemical performance. Herein a built-in heteroatom “self-doping” of albumen-derived graphene for sodium storage is reported. The built-in sulfur and nitrogen in albumen act as the doping source during the carbonization of proteins. The sulfur-rich proteins in albumen can also guide the doping and nucleation of nickel sulfide nanoparticles. Additionally, the porous architecture of the carbonized proteins is achieved through removable KCl/NaCl salts (medium) under high-temperature melting conditions. During the carbonization process, nitrogen can also reduce the carbonization temperature of thermally stable carbon materials. In this work, the NS-graphene delivered a specific capacity of 108.3 mAh g⁻¹ after 800 cycles under a constant current density of 500 mA g⁻¹. In contrast, the Ni/NiS₂/NS-graphene maintained a specific capacity of 134.4 mAh g⁻¹; thus the presence of Ni/NiS₂ particles improved the electrochemical performance of the whole composite.     

Proton-Reservoir Hydrogel Electrolyte for Long-Term Cycling Zn/PANI Batteries in Wide Temperature Range

Advanced aqueous batteries are promising for next generation flexible devices owing to the high safety, yet still requiring better cycling stability and high capacities in wide temperature range. Herein, a polymeric acid hydrogel electrolyte (PAGE) with 3 M Zn(ClO₄)₂ was fabricated for high performance Zn/polyaniline (PANI) batteries. With PAGE, even at −35 °C the Zn/Zn symmetrical battery can keep stable for more than 1 500 h under 2 mA cm⁻², and the Zn/PANI battery can provide ultra-high stable specific capacity of 79.6 mAh g⁻¹ for more than 70 000 cycles at 15 A g⁻¹. This can be mainly ascribed to the −SO₃⁻H⁺ function group in PAGE. It can generate constant protons and guide the (002) plane formation to accelerate the PANI redox reaction kinetics, increase the specific capacity, and suppress the side reaction and dendrites. This proton-supplying strategy by polymeric acid hydrogel may further propel the development of high performance aqueous batteries.     

Hierarchical Hollow-Nanocube Ni−Co Skeleton@MoO3/MoS2 Hybrids for Improved-Performance Lithium-Ion Batteries

Improving the performance of anode materials for lithium-ion batteries (LIBs) is a hotly debated topic. Herein, hollow Ni−Co skeleton@MoS₂/MoO₃ nanocubes (NCM-NCs), with an average size of about 193 nm, have been synthesized through a facile hydrothermal reaction. Specifically, MoO₃/MoS₂ composites are grown on Ni−Co skeletons derived from nickel–cobalt Prussian blue analogue nanocubes (Ni−Co PBAs). The Ni−Co PBAs were synthesized through a precipitation method and utilized as self-templates that provided a larger specific surface area for the adhesion of MoO₃/MoS₂ composites. According to Raman spectroscopy results, as-obtained defect-rich MoS₂ is confirmed to be a metallic 1T-phase MoS₂. Furthermore, the average particle size of Ni−Co PBAs (≈43 nm) is only about one-tenth of the previously reported particle size (≈400 nm). If assessed as anodes of LIBs, the hollow NCM-NC hybrids deliver an excellent rate performance and superior cycling performance (with an initial discharge capacity of 1526.3 mAh g⁻¹ and up to 1720.6 mAh g⁻¹ after 317 cycles under a current density of 0.2 A g⁻¹). Meanwhile, ultralong cycling life is retained, even at high current densities (776.6 mAh g⁻¹ at 2 A g⁻¹ after 700 cycles and 584.8 mAh g⁻¹ at 5 A g⁻¹ after 800 cycles). Moreover, at a rate of 1 A g⁻¹, the average specific capacity is maintained at 661 mAh g⁻¹. Thus, the hierarchical hollow NCM-NC hybrids with excellent electrochemical performance are a promising anode material for LIBs.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High‐Energy Sodium‐Ion Batteries

Although sodium‐ion batteries (SIBs) are considered as alternatives to lithium‐ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8‐tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox‐active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.