Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.     

Building Hierarchical Microcubes Composed of One-Dimensional CoSe2@Nitrogen-Doped Carbon for Superior Sodium Ion Batteries

Designing and synthesizing highly stable anode materials with high capacity is critical for the practical application of sodium ion batteries (SIBs), however, to date, this remains an insurmountable barrier. The introduction of hierarchical architectures and carbon supports is proving an effective strategy for addressing these challenges. Thus, we have fabricated a hierarchical CoSe₂@nitrogen-doped carbon (CoSe₂@NC) microcube composite using the Prussian blue analogue Co₃[Co(CN)₆]₂ as template. The rational combination of the unique hierarchical construction from one to three dimensions and a nitrogen-doped carbon skeleton facilitates sodium ion and electron transport as well as stabilizing the host structure during repeated discharge/charge processes, which contributes to its excellent sodium storage capability. As expected, the as-prepared CoSe₂@NC composite delivered remarkable reversible capacity and ultralong cycling lifespan even at a high rate of 2.0 A g⁻¹ (384.3 mA h g⁻¹ after1800 loops) when serving as the anode material for SIBs. This work shows the great potential of the CoSe₂-based anode for practical application in SIBs, and the original strategy may be extended to other anode materials.     

Bismuth Nanoparticles Embedded in Carbon Spheres as Anode Materials for Sodium/Lithium‐Ion Batteries

Sodium‐ion batteries (SIBs) are regarded as an attractive alternative to lithium‐ion batteries (LIBs) for large‐scale commercial applications, because of the abundant terrestrial reserves of sodium. Exporting suitable anode materials is the key to the development of SIBs and LIBs. In this contribution, we report on the fabrication of Bi@C microspheres using aerosol spray pyrolysis technique. When used as SIBs anode materials, the Bi@C microsphere delivered a high capacity of 123.5 mAh g^?1 after 100 cycles at 100 mA g^?1. The rate performance is also impressive (specific capacities of 299, 252, 192, 141, and 90 mAh g^?1 are obtained under current densities of 0.1, 0.2, 0.5, 1, and 2 A g^?1, respectively). Furthermore, the Bi@C microsphere also proved to be suitable LIB anode materials. The excellent electrochemical performance for both SIBs and LIBs can attributed to the Bi@C microsphere structure with Bi nanoparticles uniformly dispersed in carbon spheres.     

Synergetic Coupling of Redox-Active Sites on Organic Electrode Material for Robust and High-Performance Sodium-Ion Storage

Organic electrode materials (OEMs), valued for their sustainability and structural tunability, have been attracting increasing attention for wide application in sodium-ion batteries (SIBs) and other rechargeable batteries. However, most OEMs are plagued with insufficient specific capacity or poor cycling stability. Therefore, it′s imperative to enhance their specific capacity and cycling stability through molecular design. Herein, we designed and synthesized a heteroaromatic molecule 2,3,8,9,14,15-hexanol hexaazatrinaphthalene (HATN-6OH) by the synergetic coupling of catechol (the precursor of ortho-quinone)/ortho-quinone functional groups and HATN conjugated core structures. The abundance of catechol/ortho-quinone and imine redox-active moieties delivers a high specific capacity of nine-electron transfer for SIBs. Most notably, the π–π interactions and intermolecular hydrogen bond forces among HATN-6OH molecules secure the stable long-term cycling performance of SIBs. Consequently, the as-prepared HATN-6OH electrode exhibited a high specific capacity (554 mAh g⁻¹ at 0.1 A g⁻¹), excellent rate capability (202 mAh g⁻¹ at 10 A g⁻¹), and stable long-term cycling performance (73 % after 3000 cycles at 10 A g⁻¹) in SIBs. Additionally, the nine-electron transfer mechanism is confirmed by systematic density functional theory (DFT) calculation, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Raman analysis. The achievement of the synergetic coupling of the redox-active sites on OEMs could be an important key to the enhancement of SIBs and other metal-ion batteries.     

In Situ Nitrogen Retention of Carbon Anode for Enhancing the Electrochemical Performance for Sodium-Ion Battery

Retaining nitrogen for polyacrylonitrile (PAN) based carbon anode is a cost-effective way to make full use of the advantages of PAN for sodium-ion batteries (SIBs). Here, a simple strategy has been successfully adopted to retain N atoms in situ and increase production yield of a novel composite PAZ by mixing 3 wt % of zinc borate (ZB) with poly (acrylonitrile-co-itaconic acid) (PANIA). Among the prepared carbonised fibre (CF) samples, PAZ-CF-700 maintains the highest N content, retaining 90 % of the original N from PANIA. It represents the highest capacity storage contribution (80.55 %) and the lowest impedance R_ct (117 Ω). Consequently, the specific capacity increases from 60 mAh g⁻¹ of PANIA-CF-700 to 190 mAh g⁻¹ of PAZ-CF-700 at a current density of 100 mA g⁻¹. At the same time, PAZ-CF-700 exhibits a good rate performance and excellent long-term cycling stability with a specific capacity of 94 mAh g⁻¹ after 4000 cycles at 1.6 A g⁻¹.     

Assembly of SnSe Nanoparticles Confined in Graphene for Enhanced Sodium‐Ion Storage Performance

Sodium‐ion batteries (SIBs) have attracted much interest as a low‐cost and environmentally benign energy storage system, but more attention is justifiably required to address the major technical issues relating to the anode materials to deliver high reversible capacity, superior rate capability, and stable cyclability. A SnSe/reduced graphene oxide (RGO) nanocomposite has been prepared by a facile ball‐milling method, and its structural, morphological, and electrochemical properties have been characterized and compared with those of the bare SnSe material. Although the redox behavior of SnSe remains nearly unchanged upon the incorporation of RGO, its electrochemical performance is significantly enhanced, as reflected by a high specific capacity of 590 mA h g^?1 at 0.050 A g^?1, a rate capability of 260 mA h g^?1 at 10 A g^?1, and long‐term stability over 120 cycles. This improvement may be attributed to the high electronic conductivity of RGO, which also serves as a matrix to buffer changes in volume and maintain the mechanical integrity of the electrode during (de)sodiation processes. In view of its excellent Na⁺ storage performance, this SnSe/RGO nanocomposite has potential as an anode material for SIBs.     

Rechargeable Sodium-Ion Battery Based on Polyazaacene Analogue Anode

The high theoretical specific capacity, strong structural designability and relatively inexpensive manufacturing cost make the exploration of organic electrode materials more attractive in recent years. In this article, owing to the large π-conjugated structure, plenty of nitrogen heteroatoms and multiring aromatic system, polyazaacene analogue poly(1,6-dihydropyrazino[2,3 g]quinoxaline-2,3,8-triyl-7-(2H)-ylidene-7,8-dimethylidene) (PQL) was applied as the anode in sodium-ion batteries (SIBs). PQL was almost insoluble in conventional liquid organic electrolyte (1 M NaClO₄ in ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v=1 : 1) with 5 % fluoroethylene carbonate (FEC)), which strongly improved its cycle stability. The initial discharge capacity was obtained to be 1825 mAh g⁻¹ at the current density of 100 mA g⁻¹ and stabilized at 317 mAh g⁻¹ after 400 cycles with the coulombic efficiency as high as 97 %. It not only showed good rate capability at high current densities (202, 183 mAh g⁻¹ at 1 A g⁻¹ and 1.5 A g⁻¹) but also had a superior energy density around 290 Wh kg⁻¹.     

Hierarchical Carbon Nanowire/Ni@MnO2 Nanocomposites for High-Performance Asymmetric Supercapacitors

A 3D hierarchical carbon cloth/nitrogen-doped carbon nanowires/Ni@MnO₂ (CC/N-CNWs/Ni@MnO₂) nanocomposite electrode was rationally designed and prepared by electrodeposition. The N-CNWs derived from polypyrrole (PPy) nanowires on the carbon cloth have an open framework structure, which greatly increases the contact area between the electrode and electrolyte and provides short diffusion paths. The incorporation of the Ni layer between the N-CNWs and MnO₂ is beneficial for significantly enhancing the electrical conductivity and boosting fast charge transfer as well as improving the charge-collection capacity. Thus, the as-prepared 3D hierarchical CC/N-CNWs/Ni@MnO₂ electrode exhibits a higher specific capacitance of 571.4 F g⁻¹ compared with those of CC/N-CNWs@MnO₂ (311 F g⁻¹), CC/Ni@MnO₂ (196.6 F g⁻¹), and CC@MnO₂ (186.1 F g⁻¹) at 1 A g⁻¹ and remarkable rate capability (367.5 F g⁻¹ at 10 A g⁻¹). Moreover, asymmetric supercapacitors constructed with CC/N-CNWs/Ni@MnO₂ as cathode material and activated carbon as anode material deliver an impressive energy density of 36.4 W h kg⁻¹ at a power density of 900 W kg⁻¹ and a good cycling life (72.8 % capacitance retention after 3500 cycles). This study paves a low-cost and simple way to design a hierarchical nanocomposite electrode with large surface area and superior electrical conductivity, which has wide application prospects in high-performance supercapacitors.     

Sn Anodes Protected by Intermetallic FeSn2 Layers for Long-lifespan Sodium-ion Batteries with High Initial Coulombic Efficiency of 93.8 %

With a theoretical capacity of 847 mAh g⁻¹, Sn has emerged as promising anode material for sodium-ion batteries (SIBs). However, enormous volume expansion and agglomeration of nano Sn lead to low Coulombic efficiency and poor cycling stability. Herein, an intermetallic FeSn₂ layer is designed via thermal reduction of polymer-Fe₂O₃ coated hollow SnO₂ spheres to construct a yolk-shell structured Sn/FeSn₂@C. The FeSn₂ layer can relieve internal stress, avoid the agglomeration of Sn to accelerate the Na⁺ transport, and enable fast electronic conduction, which endows quick electrochemical dynamics and long-term stability. As a result, the Sn/FeSn₂@C anode exhibits high initial Coulombic efficiency (ICE=93.8 %) and a high reversible capacity of 409 mAh g⁻¹ at 1 A g⁻¹ after 1500 cycles, corresponding to an 80 % capacity retention. In addition, NVP//Sn/FeSn₂@C sodium-ion full cell shows outstanding cycle stability (capacity retaining rate of 89.7 % after 200 cycles at 1 C).     

A novel conjugated porous polymer based on triazine and imide as cathodes for sodium storage

Organic electrode materials have attracted more and more attention for sodium-ion batteries (SIBs) that are regarded as one of the most promising alternatives of lithium-ion batteries, because they can endure the storage of large sodium ions (with a larger radius than that of lithium ions) without obvious volume change. Herein, we report a novel conjugated porous polymer (TPIP) based on triazine and imide as cathodes material for SIBs. TPIP has abundant redox-active sites, good thermal stability (400°C) and large specific surface area (306 m² g⁻¹). As a result, TPIP electrode delivered a specific capacity of 120 mAh g⁻¹ after 50 cycles at a current density of 0.1 A g⁻¹ and 85 mAh g⁻¹ after 150 cycles at a current density of 1.0 A g⁻¹. Ex-situ X-ray photoelectron spectra and Fourier transform infrared spectra showed that the TPIP electrodes reversibly stored three sodium ions per unit through the triazine rings and half of the carbonyl groups. These results deepen our understanding of charge storage mechanisms of polymers with triazine and imide units and will provide guidance for the future design of electrode materials for high-performance SIBs.     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.     

Breaking Mass Transport Limitations by Iodized Polyacrylonitrile Anodes for Extremely Fast-Charging Lithium-Ion Batteries

The fast-charging capability of rechargeable batteries is greatly limited by the sluggish ion transport kinetics in anode materials. Here we develop an iodized polyacrylonitrile (I-PAN) anode that can boost the bulk/interphase lithium (Li)-ion diffusion kinetics and accelerate Li-ion desolvation process to realize high-performance fast-charging Li-ion batteries. The iodine immobilized in I-PAN framework expands ion transport channels, compresses the electric double layer, and changes the inner Helmholtz plane to form LiF/LiI-rich solid electrolyte interphase layer. The dissolved iodine ions in the electrolyte self-induced by the interfacial nucleophilic substitution of PF₆⁻ not only promote the Li-ion desolvation process, but also reuse the plated/dead Li formed on the anode under fast-charging conditions. Consequently, the I-PAN anode exhibits a high capacity of 228.5 mAh g⁻¹ (39 % of capacity at 0.5 A g⁻¹ delivered in 18 seconds) and negligible capacity decay for 10000 cycles at 20 A g⁻¹. The I-PAN||LiNi_0.8Co_0.1Mn_0.1O₂ full cell shows excellent fast-charging performance with attractive capacities and negligible capacity decay for 1000 cycles at extremely high rates of 5 C and 10 C (1 C=180 mA g⁻¹). We also demonstrate high-performance fast-charging sodium-ion batteries using I-PAN anodes.     

Sulfur-/Nitrogen-Rich Albumen Derived “Self-Doping” Graphene for Sodium-Ion Storage

The development of sodium-ion batteries (SIBs) is hindered by the rapid reduction in reversible capacity of carbon-based anode materials. Outside-in doping of carbon-based anodes has been extensively explored. Nickel and NiS₂ particles embedded in nitrogen and sulfur codoped porous graphene can significantly improve the electrochemical performance. Herein a built-in heteroatom “self-doping” of albumen-derived graphene for sodium storage is reported. The built-in sulfur and nitrogen in albumen act as the doping source during the carbonization of proteins. The sulfur-rich proteins in albumen can also guide the doping and nucleation of nickel sulfide nanoparticles. Additionally, the porous architecture of the carbonized proteins is achieved through removable KCl/NaCl salts (medium) under high-temperature melting conditions. During the carbonization process, nitrogen can also reduce the carbonization temperature of thermally stable carbon materials. In this work, the NS-graphene delivered a specific capacity of 108.3 mAh g⁻¹ after 800 cycles under a constant current density of 500 mA g⁻¹. In contrast, the Ni/NiS₂/NS-graphene maintained a specific capacity of 134.4 mAh g⁻¹; thus the presence of Ni/NiS₂ particles improved the electrochemical performance of the whole composite.     

In-situ Grown SnO2 Nanospheres on Reduced GO Nanosheets as Advanced Anodes for Lithium-ion Batteries

Nanostructured tin dioxide (SnO₂) has emerged as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity (1494 mA h g⁻¹) and excellent stability. Unfortunately, the rapid capacity fading and poor electrical conductivity of bulk SnO₂ material restrict its practical application. Here, SnO₂ nanospheres/reduced graphene oxide nanosheets (SRG) are fabricated through in-situ growth of carbon-coated SnO₂ using template-based approach. The nanosheet structure with the external layer of about several nanometers thickness can not only accommodate the volume change of Sn lattice during cycling but also enhance the electrical conductivity effectively. Benefited from such design, the SRG composites could deliver an initial discharge capacity of 1212.3 mA h g⁻¹ at 0.1 A g⁻¹, outstanding cycling performance of 1335.6 mA h g⁻¹ after 500 cycles at 1 A g⁻¹, and superior rate capability of 502.1 mA h g⁻¹ at 5 A g⁻¹ after 10 cycles. Finally, it is believed that this method could provide a versatile and effective process to prepare other metal-oxide/reduced graphene oxide (rGO) 2D nanocomposites.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High‐Energy Sodium‐Ion Batteries

Although sodium‐ion batteries (SIBs) are considered as alternatives to lithium‐ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8‐tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox‐active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High-Energy Sodium-Ion Batteries

Although sodium-ion batteries (SIBs) are considered as alternatives to lithium-ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8-tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox-active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

Few-Layer MoS2 Nanosheets Encapsulated in N-Doped Carbon Hollow Spheres as Long-Life Anode Materials for Lithium-Ion Batteries

Two-dimensional molybdenum disulfide (MoS₂) has been recognized as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity, but its rapid capacity decay owing to poor conductivity, structure pulverization, and polysulfide dissolution presents significant challenges in practical applications. Herein, triple-layered hollow spheres in which MoS₂ nanosheets are fully encapsulated between inner carbon and outer nitrogen-doped carbon (NC) were fabricated. Such an architecture provides high conductivity and efficient lithium-ion transfer. Moreover, the NC shell prevents aggregation and exfoliation of MoS₂ nanosheets and thus maintains the integrity of the nanostructure during the charge/discharge process. As anode materials for LIBs, the C@MoS₂@NC hollow spheres deliver a high reversible capacity (747 mA h g⁻¹ after 100 cycles at 100 mA g⁻¹) and excellent long-cycle performance (650 mA h g⁻¹ after 1000 cycles at 1.0 A g⁻¹), which confirm its potential for high-performance LIBs.     

Pseudocapacitive Lithium Storage of Cauliflower-Like CoFe2O4 for Low-Temperature Battery Operation

Binary transition-metal oxides (BTMOs) with hierarchical micro–nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe₂O₄ (cl-CoFe₂O₄) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro–nano-structure can promote fast ion transport and stable electrode–electrolyte interfaces. As a result, the cl-CoFe₂O₄ can deliver a high specific capacity (1019.9 mAh g⁻¹ at 0.1 A g⁻¹), excellent rate capability (626.0 mAh g⁻¹ at 5 A g⁻¹), and good cyclability (675.4 mAh g⁻¹ at 4 A g⁻¹ for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and −25 °C, the cl-CoFe₂O₄ anode can deliver high capacities of 907.5 and 664.5 mAh g⁻¹ at 100 mA g⁻¹, respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO₄ cathode exhibits a high rate performance (214.2 mAh g⁻¹ at 5000 mA g⁻¹) and an impressive cycling performance (612.7 mAh g⁻¹ over 140 cycles at 300 mA g⁻¹) in the voltage range of 0.5–3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe₂O₄ is dominated by pseudocapacitive behavior, leading to fast Li⁺ insertion/extraction and good cycling life.     

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Pitch has been used to prepare electrodes by high-temperature heat treatments for supercapacitors, lithium-ion batteries, on account of its rich aromatic ring structure. Here, the toluene-soluble component of pitch is used to prepare a kind of laminated carbon. This was realized by a template-free synthesis at low temperature with the addition of pressure. The toluene-soluble component has a small molecular weight, which makes the thermal deformation ability stronger and then enhances the orientation of the carbon layer with the help of pressure. The prepared anode exhibits a splendid electrochemical performance compared with the traditional graphite anode. A high stable capacity of approximately 550 mAh g⁻¹ at 50 mA g⁻¹, which is much higher than graphite (372 mAh g⁻¹), is obtained. Also, when the current density is up to 2 A g⁻¹, the capacity is about 150 mAh g⁻¹. Surprisingly, it also delivers a superior cycling performance. And when used as the anode/cathode electrode for lithium-ion capacitors, a high energy density can be obtained. The present work offers an opportunity to utilize the pitch source in lithium energy storage with promising cycle life, high energy/power density, and low cost.