Squarylium Cyanine Dyes for Photoelectric Conversion

Asanimportantclassoffunctionalmaterials,squaryliumcyaninedyespossessmanyexcellentpropertiessuchasstablestructures,outstandingphotoconductivityaswellassmallthermalconductivity,andexhibitintenseandsharpabsorptionbandsinthevisibleandnearinfraredregionwithhighlightharvestingcapacity,whichopenupextensiveapplicationsinthevariousfieldsl-3.Inthispaper,twosymmetricalsquaryliumindocyanineswiththeintroductionofhydroxyethylandsulfopropylgroupsontheheterocyclicnitrogenweresynthesizedandcharacterizedbyUV,I…     

Panchromatic ruthenium sensitizer based on electron-rich heteroarylvinylene π-conjugated quaterpyridine for dye-sensitized solar cells

The first example of a heteroarylvinylene π-conjugated quaterpyridine Ru(II) sensitizer (N1044) was synthesized and used in dye-sensitized solar cells; the dye has an effective panchromatic absorption band, covering the entire visible spectrum up to the NIR region, and superior electrochemical characteristics (HOMO/LUMO and bandgap energies) with respect to previous representative Ru(II) bi- and quaterpyridine sensitizers. A record IPCE curve ranging from 360 to 920 nm has been measured with a maximum of 65% at 646 nm and still 33% efficiency at 800 nm; this leads to substantially increased photocurrent (19.2 mA cm(-2)) when compared to the prototype N719 Ru(II) sensitizer.     

Near infrared thieno[3,4-b]pyrazine sensitizers for efficient quasi-solid-state dye-sensitized solar cells

Three near infrared (NIR) metal-free organic sensitizers (FNE32, FNE34, FNE36) based on the thieno[3,4-b]pyrazine derivative have been designed and synthesized for application in quasi-solid-state dye-sensitized solar cells (DSSCs). These organic dyes demonstrate maximum absorption bands at 596-625 nm due to the presence of the thieno[3,4-b]pyrazine derivative, which facilitates the intramolecular electron transfer from the donor to the acceptor. Quasi-solid-state DSSCs based on FNE34 display efficient photoelectric conversion over the whole visible range extending into the NIR region up to 900 nm with maximum incident monochromatic photon-to-electron conversion efficiency (IPCE) of 77%, yielding a short-circuit photocurrent density of 16.24 mA cm(-2) and a power conversion efficiency of 5.30%. To the best of our knowledge, this is the highest efficiency for quasi-solid-state DSSCs based on an organic NIR dye. When exposed to one-sun illumination for 1000 h, the quasi-solid-state DSSC based on FNE34 exhibits good long-term stability with almost constant power conversion efficiency.     

Flexible Near‐Infrared Photovoltaic Devices Based on Plasmonic Hot‐Electron Injection into Silicon Nanowire Arrays

The development of flexible near‐infrared (NIR) photovoltaic (PV) devices containing silicon meets the strong demands for solar utilization, portability, and sustainable manufacture; however, improvements in the NIR light absorption and conversion efficiencies in ultrathin crystalline Si are required. We have developed an approach to improve the quantum efficiency of flexible PV devices in the NIR spectral region by integrating Si nanowire arrays with plasmonic Ag nanoplates. The Ag nanoplates can directly harvest and convert NIR light into plasmonic hot electrons for injection into Si, while the Si nanowire arrays offer light trapping. Taking the wavelength of 800 nm as an example, the external quantum efficiency has been improved by 59 % by the integration Ag nanoplates. This work provides an alternative strategy for the design and fabrication of flexible NIR PVs.     

Ultrafast dynamics and excited state deactivation of [Ru(bpy)2Sq]+ and its derivatives

Femtosecond transient absorption spectroscopy has been employed to understand the excited state dynamics of [Ru(bpy)(2)Sq](+) (I; bpy is 2,2'-bipyridyl, and Sq is the deprotonated species of the semiquinone form of 1,2-dihydroxy benzene) and its derivatives, a widely studied near-infrared (NIR) active electrochromic dye. Apart from the well-defined dpi(Ru) --> pi(bpy)-based metal-to-ligand charge transfer (MLCT) transition bands at approximately 480 nm, this class of molecules generally shows another dpi(Ru) --> pi(Sq)(SOMO)-based intense MLCT band at around 900 nm, which is known to be redox active and bleaches reversibly upon a change in the oxidation state of the coordinated dioxolene moiety. To have better insight into the photoinduced electron transfer dynamics associated with this MLCT transition, detailed investigations have been carried out on exciting this MLCT band at 800 nm. Immediately after photoexcitation, bleach at 900 nm has been observed, whose recovery is found to follow a triexponential function with major contribution from the ultrafast component. This ultrafast component of approximately 220 fs has been ascribed to the S(1) to S(0) internal conversion process. In addition to the bleach, we have detected two transient species absorbing at 730 and 1000 nm with a formation time approximately 220 fs for both species. The excited state lifetimes for these two transient species have been measured to be 1.5 and 11 ps and have been attributed to excited singlet ((1)MLCT) and triplet ((3)MLCT) states, respectively. Transient measurements carried out on the different but analogous derivatives (II and III) have also shown similar recovery dynamics except that the rate for the internal conversion process has increased with the decrease in the S(1) to S(0) energy gap. The observed results are consistent with the energy gap law for nonradiative decay from S(1) to S(0).     

Supramolecular free radicals: near-infrared organic materials with enhanced photothermal conversion

A novel kind of supramolecular free radical with significantly improved free radical yield and enhanced near-infrared (NIR) photothermal conversion has been fabricated. Perylene diimide (PDI) can undergo chemical reduction to generate PDI radical anions. Cucurbit[7]uril (CB[7]), a bulky hydrophilic head, was utilized to encapsulate the two end groups of the PDI derivative via host–guest interactions, thus hindering its aggregation and suppressing the dimerization and quenching of PDI radical anions in aqueous solution. Due to the increased concentration of radical anions and their absorption above 800 nm, the efficiency of NIR photothermal conversion was significantly improved. Compared with free radicals fabricated by covalent chemistry, the supramolecular free radicals established here could provide a facile approach for the promoted formation of aromatic free radicals, thus opening up a new strategy for the design of NIR photothermal materials with enhanced photothermal conversion.     

Fluorescent Phthalocyanine-Encapsulated Bovine Serum Albumin Nanoparticles: Their Deployment as Therapeutic Agents in the NIR Region

In recent times, researchers have aimed for new strategies to combat cancer by the implementation of nanotechnologies in biomedical applications. This work focuses on developing protein-based nanoparticles loaded with a newly synthesized NIR emitting and absorbing phthalocyanine dye, with photodynamic and photothermal properties. More precisely, we synthesized highly reproducible bovine serum albumin-based nanoparticles (75% particle yield) through a two-step protocol and successfully encapsulated the NIR active photosensitizer agent, achieving a good loading efficiency of 91%. Making use of molecular docking simulations, we confirm that the NIR photosensitizer is well protected within the nanoparticles, docked in site I of the albumin molecule. Encouraging results were obtained for our nanoparticles towards biomedical use, thanks to their negatively charged surface (−13.6 ± 0.5 mV) and hydrodynamic diameter (25.06 ± 0.62 nm), favorable for benefitting from the enhanced permeability and retention effect; moreover, the MTT viability assay upholds the good biocompatibility of our NIR active nanoparticles. Finally, upon irradiation with an NIR 785 nm laser, the dual phototherapeutic effect of our NIR fluorescent nanoparticles was highlighted by their excellent light-to-heat conversion performance (photothermal conversion efficiency 20%) and good photothermal and size stability, supporting their further implementation as fluorescent therapeutic agents in biomedical applications.     

Cationic IrIII Emitters with Near-Infrared Emission Beyond 800 nm and Their Use in Light-Emitting Electrochemical Cells

Solid-state near-infrared (NIR) light-emitting devices have recently received considerable attention as NIR light sources that can penetrate deep into human tissue and are suitable for bioimaging and labeling. In addition, solid-state NIR light-emitting electrochemical cells (LECs) have shown several promising advantages over NIR organic light-emitting devices (OLEDs). However, among the reported NIR LECs based on ionic transition-metal complexes (iTMCs), there is currently no iridium-based LEC that displays NIR electroluminescence (EL) peaks near to or above 800 nm. In this report we demonstrate a simple method for adjusting the energy gap between the highest-occupied molecular orbital (HOMO) and the lowest-unoccupied molecular orbital (LUMO) of iridium-based iTMCs to generate NIR emission. We describe a series of novel ionic iridium complexes with very small energy gaps, namely NIR1 – NIR6 , in which 2,3-diphenylbenzo[g]quinoxaline moieties mainly take charge of the HOMO energy levels and 2,2′-biquinoline, 2-(quinolin-2-yl)quinazoline, and 2,2′-bibenzo[d]thiazole moieties mainly control the LUMO energy levels. All the complexes exhibited NIR phosphorescence, with emission maxima up to 850 nm, and have been applied as components in LECs, showing a maximum external quantum efficiency (EQE) of 0.05 % in the EL devices. By using a host–guest emissive system, with the iridium complex RED as the host and the complex NIR3 or NIR6 as guest, the highest EQE of the LECs can be further enhanced to above 0.1 %.     

Autocatalytic polymerization of selenium/polypyrrole nanocomposites as functional theranostic agents for multi-spectral photoacoustic imaging and photothermal therapy of tumor

The synchronization of diagnosis and treatment is a new trend in cancer treatment. Photoacoustic imaging (PAI) and photothermal therapy (PTT) are recognized as one of the perfect combinations. The autocatalytic polymerization of selenium/polypyrrole (Se@PPy) nanocomposites with a wide-absorption band at near-infrared region (NIR, 800 nm) has been developed in this paper. The wide optical absorption characteristics enable Se@PPy nanocomposites to achieve multi-spectral PAI. Ex vivo experiments show desirable photoacoustic ability of the Se@PPy nanocomposites at wavelengths ranging from 700 nm to 900 nm, which is better than that of commercial indocyanine green (ICG). Se@PPy nanocomposites have high photothermal conversion efficiency up to 36.3% as well as excellent photo-thermal stability. In vitro cytotoxicity test demonstrates that the Se@PPy nanocomposites have good bio-safety. Furthermore, the feasibility of Se@PPy nanocomposites for enhancing multi-spectral PAI guided PTT was verified on 4T1 tumor-bearing nude mice. Our results indicate that Se@PPy nanocomposites could be used as an effective theranostic agent for near-infrared light-mediated PAI and PTT of tumor.     

Efficient Near-Infrared Electroluminescence from Lanthanide-Doped Perovskite Quantum Cutters

Perovskite nanocrystals (PeNCs) deliver size- and composition-tunable luminescence of high efficiency and color purity in the visible range. However, attaining efficient electroluminescence (EL) in the near-infrared (NIR) region from PeNCs is challenging, limiting their potential applications. Here we demonstrate a highly efficient NIR light-emitting diode (LED) by doping ytterbium ions into a PeNCs host (Yb³⁺ : PeNCs), extending the EL wavelengths toward 1000 nm, which is achieved through a direct sensitization of Yb³⁺ ions by the PeNC host. Efficient quantum-cutting processes enable high photoluminescence quantum yields (PLQYs) of up to 126 % from the Yb³⁺ : PeNCs. Through halide-composition engineering and surface passivation to improve both PLQY and charge-transport balance, we demonstrate an efficient NIR LED with a peak external quantum efficiency of 7.7 % at a central wavelength of 990 nm, representing the most efficient perovskite-based LEDs with emission wavelengths beyond 850 nm.     

White‐Light Emission from Dual‐Way Photon Energy Conversion in a Dye‐Encapsulated Metal–Organic Framework

The design of white‐light phosphors is attractive in solid‐state lighting (SSL) and related fields. A new strategy in obtaining white light emission (WLE) from dual‐way photon energy conversion in a series of dye@MOF ( LIFM‐WZ‐6 ) systems is presented. Besides the traditional UV‐excited one‐photon absorption (OPA) pathway, white‐light modulation can also be gained from the combination of NIR‐excited green and red emissions of MOF backbone and encapsulated dyes via two‐photon absorption (TPA) pathway. As a result, down‐conversion OPA white light was obtained for RhB⁺@LIFM‐WZ‐6 (0.1 wt %), BR‐2⁺@LIFM‐WZ‐6 (2 wt %), and APFG⁺@LIFM‐WZ‐6 (0.1 wt %) samples under 365 nm excitation. RhB⁺@LIFM‐WZ‐6 (0.05 wt %), BR‐2⁺@LIFM‐WZ‐6 (1 wt %) and APFG⁺@LIFM‐WZ‐6 (0.05 wt %) exhibit up‐conversion TPA white light under the excitation of 800, 790, and 730 nm, respectively. This new WLE generation strategy combines different photon energy conversion mechanisms together.     

An Isoindigo‐Based “Double‐Cable” Conjugated Polymer for Single‐ Component Polymer Solar Cells

An isoindigo‐based “double‐cable” conjugated polymer bearing perylene bisimide side units was developed via Stille polymerization for application in single‐component polymer solar cells, in which a power conversion efficiency of 1% with broad photo‐response from 300 nm to 800 nm was achieved. There is no evidence of large phase separation confirmed by AFM images and photoluminescence (PL) spectra. The space charge limit current measurements and light intensity dependence measurements indicate that the low electron mobility and the significant recombination of photogenerated charge carriers in active layer mainly account for the low performance of our solar cells. Our results suggest that these “double‐cable” are promising candidates for use in single‐component polymer solar cells with NIR photoresponse.     

Energy and hole transfer between dyes attached to titania in cosensitized dye-sensitized solar cells

Cosensitization of broadly absorbing ruthenium metal complex dyes with highly absorptive near-infrared (NIR) organic dyes is a clear pathway to increase near-infrared light harvesting in liquid-based dye-sensitized solar cells (DSCs). In cosensitized DSCs, dyes are intimately mixed, and intermolecular charge and energy transfer processes play an important role in device performance. Here, we demonstrate that an organic NIR dye incapable of hole regeneration is able to produce photocurrent via intermolecular energy transfer with an average excitation transfer efficiency of over 25% when cosensitized with a metal complex sensitizing dye (SD). We also show that intermolecular hole transfer from the SD to NIR dye is a competitive process with dye regeneration, reducing the internal quantum efficiency and the electron lifetime of the DSC. This work demonstrates the general feasibility of using energy transfer to boost light harvesting from 700 to 800 nm and also highlights a key challenge for developing highly efficient cosensitized dye-sensitized solar cells.     

Synthesis,Aromaticity, and Application of peri-Pentacenopentacene: Localized Representation of Benzenoid Aromatic Compounds

We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene ( TIPS-PPP ), a vertical extension of TIPS-pentacene ( TIPS-PEN ) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN , TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1 cm² V^?1 s^?1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800 nm.     

One‐Dimensional Fe2P Acts as a Fenton Agent in Response to NIR II Light and Ultrasound for Deep Tumor Synergetic Theranostics

The stringent reaction conditions for an effective Fenton reaction (pH range of 3–4) hinders its application in cancer therapy. Therefore, how to improve the efficiency of the Fenton reaction in a tumor site has been the main obstacle in chemodynamic therapy (CDT). Herein, we report biocompatible one‐dimensional (1D) ferrous phosphide nanorods (FP NRs) with ultrasound (US)‐ and photothermal (PT)‐enhanced Fenton properties and excellent photothermal conversion efficiency (56.6 %) in the NIR II window, showing synergistic therapeutic properties. Additionally, the high photothermal conversion efficiency and excellent traverse relaxivity (277.79 mm ^?1 s^?1) of the FP NRs means they are excellent photoacoustic imaging (PAI) and magnetic resonance imaging (MRI) agents. This is the first report on exploiting the response of metallic phosphides to NIR II laser (1064 nm) and ultrasound to improve the CDT effect with a high therapeutic effect and PA/MR imaging.     

Perylene anhydride fused porphyrins as near-infrared sensitizers for dye-sensitized solar cells

Two perylene anhydride fused porphyrins 1 and 2 have been synthesized and employed successfully in dye-sensitized solar cells (DSCs). Both compounds showed broad incident monochromatic photon-to-current conversion efficiency spectra covering the entire visible spectral region and even extending into the near-infrared (NIR) region up to 1000 nm, which is impressive for ruthenium-free dyes in DSCs.     

Synthesis,Aromaticity, and Application of peri-Pentacenopentacene: Localized Representation of Benzenoid Aromatic Compounds

We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene ( TIPS-PPP ), a vertical extension of TIPS-pentacene ( TIPS-PEN ) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN , TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1 cm² V^?1 s^?1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800 nm.     

Near-Infrared Fluorescence Lifetime Imaging of Biomolecules with Carbon Nanotubes**

Single-walled carbon nanotubes (SWCNTs) are versatile near infrared (NIR) fluorescent building blocks for biosensors. Their surface is chemically tailored to respond to analytes by a change in fluorescence. However, intensity-based signals are easily affected by external factors such as sample movements. Here, we demonstrate fluorescence lifetime imaging microscopy (FLIM) of SWCNT-based sensors in the NIR. We tailor a confocal laser scanning microscope (CLSM) for NIR signals (>800 nm) and employ time correlated single photon counting of (GT)₁₀-DNA functionalized SWCNTs. They act as sensors for the important neurotransmitter dopamine. Their fluorescence lifetime (>900 nm) decays biexponentially and the longer lifetime component (370 ps) increases by up to 25 % with dopamine concentration. These sensors serve as paint to cover cells and report extracellular dopamine in 3D via FLIM. Therefore, we demonstrate the potential of fluorescence lifetime as a readout of SWCNT-based NIR sensors.     

Low band‐gap diketopyrrolopyrrole‐containing polymers for near infrared electrochromic and photovoltaic applications

Donor–acceptor type polymers bearing diketopyrrolopyrrole and 3,4‐ethylenedioxythiophene units are reported. The polymers are green and exhibit very low band‐gaps (1.19 eV) with strong and broad absorption (maxima of about 830 nm) in the near infrared (NIR) region in their neutral film states. The polymers display color changes between dark green and light blue with exceptional optical contrasts in the NIR regions of up to 78 and 63% as thin films and single‐layer electrochromic devices, respectively. Fast switching, good stabilities as well as high coloration efficiencies (743–901 cm² C^?1) were also observed. The polymers could also be potentially used as photovoltaic material, with a power conversion efficiency of up to 1.68%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1287–1295     

Bright,Stable, and Biocompatible Organic Fluorophores Absorbing/Emitting in the Deep Near‐Infrared Spectral Region

Small‐molecule organic fluorophores spectrally active in the 800–950 nm region are sought‐after for their broad potential in biomedical and material applications. We have developed a new family of brightly fluorescent dyes ( ECX ) to meet this challenge. ECX dyes are transparent to the visible region, while strongly absorbing in the NIR region at approximately 880 nm. They emit at around 915 nm with a fluorescence quantum yield up to 13.3 %. ECX dyes exhibit high chemostability, high photostability, and low tendency to aggregate. Other merits of ECX dyes include low degree of solvatochromism and facile post‐synthetic derivatization. ECX dyes potentially make available the 800–950 nm region for spectroscopic and microscopic applications and are also expected to find broad material applications.