光/潮气双重固化聚氨酯涂层的制备及性能研究

以甲苯-2,4-二异氰酸酯(TDI)和二乙醇胺(DEOA)为原料一步法合成了超支化聚氨酯,对其改性制备了光固化超支化聚氨酯丙烯酸酯(HPUA)和一系列双重固化(UV/潮气)超支化聚氨酯丙烯酸酯(DHPUA),使用傅立叶红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)和碳谱(13C-NMR)以及凝胶色谱(GPC)对其分子结构进行了表征.并以其为预聚物制备光固化涂层,通过对双重固化涂层的表面形貌、热性能和物理性能的研究,结果表明,超支化双重固化涂层经过潮气固化后,涂层表面的粗糙度随着树脂中硅氧烷端基的含量的增加先下降后上升;超支化双重固化涂层的物理性能和热稳定性都随着树脂中硅氧烷端基的含量的增加而提升.     

PMPS/PMAc相容性与同步互贯聚合物网络的阻尼性能研究

互贯聚合物网络是一种聚合物合金 ,其组分的热力学性质决定组分间的相容性和微相结构 ,从而影响材料的阻尼性能 .采用同步互贯聚合物网络 (SIN)技术制备了一种新型的聚苯基硅氧烷 (PMPS) 聚甲基丙烯酸酯 (PMAc)阻尼材料 ,用DMA和AFM等表征研究了其玻璃化温度转变行为与微观相态结构 .结果表明 ,由相容性好的组分制备的SIN材料阻尼值最高 ,tanδmax 可达 1 4,只有一个玻璃化温度转变峰 ,其微相结构为双相连续 ;组分介于相容与不相容之间时 ,所构成的SIN样品的tanδ≥ 0 3的温度区间最宽 ,可达 170℃ ,微相结构为单相连续 ;由相容性差的组分制得的SIN阻尼材料的内耗峰裂分为两个区间 .PMPS PMAcSIN材料的阻尼性能可以通过调节组分的相容性进行控制 .     

溶胶-凝胶法制备二氧化钛纳米粒子及在光固化体系中的稳定分散

选用3种不同的稳定剂,乙酰丙酮(acac),异丙氧基三(焦磷酸二辛酯)钛(TTPO)和可聚合有机磷酸酯(MAP),采用钛酸四正丁酯(TBT)通过溶胶-凝胶法合成了一系列二氧化钛溶胶,并与树脂/单体相混合,制备成有机-无机杂化光固化涂料.利用FT-IR监测了TBT水解缩合形成溶胶的过程及杂化体系的光聚合过程.杂化固化膜SEM结果显示,在合成溶胶过程中添加不同的稳定剂对杂化固化膜中无机粒子粒径尺寸等形态有显著影响,其中使用TTPO作为稳定剂得到的无机粒子分散最均匀,粒径最小,约20 nm.物理性能测试表明光固化杂化膜在硬度和柔韧性方面都有明显的改善.     

笼型倍半硅氧烷形态分析及对杂化材料相容性和机械性能的影响

采用水解缩合方法制备了八乙烯基笼型倍半硅氧烷(OVPOSS), 并将其引入到聚甲基丙烯酸甲酯(PMMA)自凝树脂中, 得到有机-无机杂化材料. 通过傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、差示扫描量热仪(DSC)、塑料球压痕硬度计、高温高速摩擦磨损测试仪和悬臂梁冲击实验等对其形貌和性能进行了研究. 结果表明, OVPOSS以晶体状态存在于PMMA树脂中. 通过DSC热性能曲线、FOX方程和Gordon-Talyor方程曲线发现, 当POSS含量较高时, PMMA-POSS杂化体系能够发生相分离, 对杂化材料的机械性能有一定的影响.     

基于改性亚麻仁油的有机/无机光固化膜的光固化机理及其反应性研究

用亚麻仁油和环戊二烯合成了改性亚麻仁油(NLO)光固化低聚物,其结构用红外光谱(FT-IR)进行了表征.基于改性亚麻仁油、巯基硅氧烷和光引发剂制备了有机/无机杂化光固化膜,对其光固化机理进行了分析,对无机粒子在改性亚麻仁油中的分布用AFM(原子力显微镜)进行了观测,建立了该有机/无机杂化体系的光固化模型.对杂化膜光固化反应性用Photo-差示扫描热分析仪(Photo-Differential Scanning Calorimeter)进行了测试,Photo-DSC测试结果表明:巯基硅氧烷能大大提高改性亚麻仁油体系光固化速率,环烯键对硫醇十分敏感.     

含硅磷杂化物环氧树脂固化物性能研究

首先用γ-环氧丙氧基三甲氧基硅烷(KH-560)和亚磷酸二乙酯(DEP)反应的中间产物进行水解缩合反应,合成了一种含磷低聚硅氧烷杂化物.并用FTIR,NMR,GPC对其结构及分子量进行了表征.然后将含磷低聚硅氧烷引入到双酚A环氧树脂(E-54)制备硅磷杂化物环氧树脂的固化物.对这种含硅磷杂化物环氧树脂固化物的性能研究发现其极限氧指数为23～29,DSC分析结果玻璃化转变温度(Tg)可以达到204℃,失重5%的温度(Td)5%比纯E-54提高近20℃.该固化物具有阻燃性能,同时具有较好的热性能。     

可紫外光固化的超支化聚硅氧烷合成及固化研究

同线型聚硅氧烷聚合物相比，超支化聚硅氧烷聚合物具有低粘度、高反应活性和良好的相容性等特点，其中以制备超支化的聚硅氧烷基硅氧烷和聚烷氧基硅氧烷为主．对于超支化聚硅氧烷主要是以ABx（X=2～6）（其中A为双键，B为硅氢键）型单体为原料，在氯铂酸或Pt／C的催化下，通过硅氢加成反应一步制备，最终聚合物的端基（B）为硅氢键，而双键则完全反应，此外也可通过含不同数目烷氧基硅烷的水解缩合制备超支化聚硅氧烷．     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

盐酸含量对光固化聚氨酯丙烯酸酯/SiO2杂化材料结构和性能的影响

由正硅酸乙酯水解制得的SiO2溶胶，在以γ—甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)为偶联剂的体系中，经溶胶-凝胶法制备了透明的光固化聚氨酯丙烯酸酯杂化材料[(PUA—TMSPM)／SiO2]。研究了盐酸浓度对(PUA-TMSPM)／SiO2结构与性能的影响。结果表明：随着pH值减小，硅溶胶体系和(PUA-TM-SPM)／SiO2杂化体系的热稳定性增大；盐酸摩尔分数XHCl的增加使(PUA-TMSPM)／SiO2光固化膜表面的两相界面结合更紧密，涂层变得更致密，并导致膜的硬度和耐磨性提高。     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

 以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

Cinnamate-functionalized hyperbranched polymer as liquid crystal photo-alignment layer

In this work, 4-methoxylcinnamoyl chloride was reacted with a commercial hyperbranched polymer （Boltom-TM H30） to prepare a hyperbranched photosensitive polymer （H30-Ci）. The polymer was characterized by UV absorption spectrum and 1H- NMR spectrum. After processed by Linearly Polarized Polymerization （LPP） method, the spin-coated films of H30-Ci were used as photo-alignment layers to assemble liquid crystal （LC） cells containing nematic liquid crystal （5CB）. The observation by polarized microscope showed that the H30-Ci blended with a linear polymer （BP-AN-Ci） photo-alignment layers could align LC molecules in a very uniform way.     

Rubber Seed Oil-Based UV-Curable Polyurethane Acrylate Resins for Digital Light Processing (DLP) 3D Printing

Novel UV-curable polyurethane acrylate (PUA) resins were developed from rubber seed oil (RSO). Firstly, hydroxylated rubber seed oil (HRSO) was prepared via an alcoholysis reaction of RSO with glycerol, and then HRSO was reacted with isophorone diisocyanate (IPDI) and hydroxyethyl acrylate (HEA) to produce the RSO-based PUA (RSO-PUA) oligomer. FT-IR and ¹H NMR spectra collectively revealed that the obtained RSO-PUA was successfully synthesized, and the calculated C=C functionality of oligomer was 2.27 per fatty acid. Subsequently, a series of UV-curable resins were prepared and their ultimate properties, as well as UV-curing kinetics, were investigated. Notably, the UV-cured materials with 40% trimethylolpropane triacrylate (TMPTA) displayed a tensile strength of 11.7 MPa, an adhesion of 2 grade, a pencil hardness of 3H, a flexibility of 2 mm, and a glass transition temperature up to 109.4 °C. Finally, the optimal resin was used for digital light processing (DLP) 3D printing. The critical exposure energy of RSO-PUA (15.20 mJ/cm²) was lower than a commercial resin. In general, this work offered a simple method to prepare woody plant oil-based high-performance PUA resins that could be applied in the 3D printing industry.     

Photopolymerization of waterborne polyurethane acrylate dispersions based on hyperbranched aliphatic polyester and properties of the cured films

A series of novel waterborne hyperbranched polyurethane acrylates for aqueous dispersions (WHPUD) based on hydroxy-functionalized hyperbranched aliphatic polyester Boltorn H20 were investigated and used as UV curable oligomers. The aqueous dispersions were electrostatically stabilized with carboxyl groups incorporated into their structures, which were neutralized by triethylamine. The photopolymerization kinetics of these WHPUDs was studied with respect to polymerization rates and unsaturation conversions in the presence of a photoinitiator using differential scanning calorimetry. The polymerization rates of the resins under UV irradiation and the gel contents in the cured films showed an increasing trend with higher concentration of acrylate functionality, which is in favor of the theory of radical chain polymerization. The mechanical and thermal behaviors of UV cured films of aqueous dispersions were evaluated by tensile testing and dynamic mechanical thermal analysis (DMTA). The results of DMTA investigations indicated that the glass transition temperature shifted to higher temperature as the content of the hard segment consisting of IPDI-HEA increased. Moreover, the storage modulus and pendulum hardness also increased with increasing the hard segment content. As the degree of neutralization increased, the T_g and tensile strength decreased, whereas, the elongation at break increased.     

METHACRYLOYL DERIVITIZED HYPERBRANCHED POLYESTER. 2. PHOTO-POLYMERIZATION AND PROPERTIES FOR DENTAL RESIN SYSTEMS

The purpose of this research is to demonstrate the usefulness of the synthesized hyperbranched multi-methacrylates (H-MMAs) in dental applications. We synthesized three hyperbranched multi-methacrylate oligomers and evaluated them as modifiers for use in the dental resin system: bisphenol A glycidyl dimethacrylate (BisGMA)/tri(ethylene glycol) dimethacrylate (TEGDMA). Their photo-polymerization activities, viscosity, mechanical properties, such as compression, diametral tensile, and flexural strength, were evaluated. H-MMAs (10%) modified dental resins have lower polymerization shrinkage and about 15% increase in mechanical strength compared to the Bis-BisGMA control. For example, H30-MMA has compressive, diametral tensile, and flexural strength of 576, 47, and 85 MPa, compared with the BisGMA control having 497, 43, and 77 MPa. In addition, hyperbranched polymer modified resins have higher glass transition temperature (T_g) and lower thermal expansion coefficient (α) than the control. This research is significant both for increasing our knowledge about hyperbranched multi-functional polymers as well as leading to new dental resin systems with better performance.     

一锅法合成含磺酸基超支化聚氨酯

N-三羟甲基甲基氨基乙磺酸(TES)的胺基与异佛尔酮二异氰酸酯(IPDI)环上活性较高的NCO在低温15℃下发生选择性反应,生成AB3型单体.随后提高反应温度(70～90℃),使AB3型单体原位聚合,一锅法合成出含磺酸基超支化聚氨酯.随着聚合温度的提高,超支化聚氨酯的支化度、分子量及分子量分布系数变大.90℃时,聚合产物的Mn为22410,支化度达到0.87.以此含磺酸基超支化聚氨酯为基础制得的聚合物电解质膜具有良好的耐热性、机械强度,其锂盐室温(约25℃)的离子电导率为3.1×10-5S/cm,100℃达到1.4×10-3 S/cm.     

铝表面自组装端羟基聚酯胺膜的XPS和STM表征

制备了端羟基聚酯胺(HTP)在铝基片上的自组装膜并进行了XPS和STM表征,确认了HTP在铝基片上的吸附组装;由XPS的吸附时间扫描,自组装单分子膜(SAMs)随浸泡时间的延长而增厚,在2 h后达到平衡。由HTP在铝基片的STM三维图可以看到HTP自组装膜以团块形式组成,其间包含孔洞缺陷。提出了铝基片上HTP–SAMs的多羟基结构与膜上孔洞的共同作用是提高环氧类涂层附着力的主要原因。     

不同代数超支化聚胺酯的制备及其在钕纳米粒子制备中的应用

以N，N-二羟乙基-3-胺基丙酸甲酯单体和季戊四醇（核）为原料，采用“准一步法”合成了具有端羟基的超支化聚胺酯（HPAE）。采用凝胶色谱、红外光谱、核磁共振和热重分析等对其进行了结构表征及性能探究。再以HPAE封装稀土粒子钕（Nd），制备出Nd复合纳米粒子，透射电镜（TEM）分析结果表明：随着HPAE代数增大，Nd纳米颗粒粒径越均匀，分散度越好。     

超支化聚酯的改性及其结晶性能的研究

用十六酰氯和十八异氰酸酯分别对端羟基的超支化聚酯Boltorn^TMH20改性,可获得粉末状超支化低聚物,具有无定形“内核”及可结晶“外壳”的分子结构.实验结果表明,采用十八异氰酸酯改性的丙烯酸化超支化聚酯的熔点高于十六酰氯改性聚合物.     

Bio‐based hyperbranched polyurethane/clay nanocomposites: adhesive,mechanical, and thermal properties

The unison of vegetable oil‐based hyperbranched polymers with nanotechnology can unhook myriad of avant‐garde applications of such materials. Thus Mesua ferrea L. seed oil‐based hyperbranched polyurethane (HBPU)/clay nanocomposites and their performance, with special reference to adhesive strength, are reported for the first time. The nanocomposites of the hyperbranched polyurethane with organically modified nanoclay were obtained by ex situ solution technique and cured by bisphenol‐A‐based epoxy with poly(amido amine) hardener system. The partially exfoliated and well‐distributed structure of nanoclay was confirmed by XRD, SEM, and TEM studies. FTIR spectra indicate the presence of H‐bonding between nanoclay and the polymer matrix. Two times improvement in the adhesive strength and scratch hardness, 10 MPa increments in the tensile strength and 112°C more thermo‐stability have been observed without much affecting the impact resistance, bending, and elongation at break of the nanocomposites compared to the pristine epoxy modified HBPU system. Thus, the resulted nanocomposites are promising materials for different advanced applications including adhesive. Copyright © 2009 John Wiley & Sons, Ltd.