疏水缔合水溶性聚合物——P(AM-NaAA-DiAC_8)的合成及其缔合性能

以双烯丙基胺和1-溴代辛烷为原料,合成了疏水单体N,N-双烯丙基辛胺(DiAC8).采取前加碱二元胶束共聚-共水解法合成了三元疏水缔合水溶性聚合物--聚(丙烯酰胺-丙烯酸钠-N,N-双烯丙基辛胺)[P(AM-NaAA-DiAC8)]. DiAC8和P(AM-NaAA-DiAC8)的结构经1H NMR和FT-IR表征.以芘为荧光探针,利用稳态荧光光谱法研究了P(AM-NaAA-DiAC8)在水溶液中的缔合行为,结果表明当r(DiAC8)=0.1%～1.4%时,随聚合物浓度、疏水单体用量的增加,P(AM-NaAA-DiAC8)在二次蒸馏水和1 mol·L-1NaCl水溶液中的Ⅰ1/Ⅰ3值减少.表明P(AM-NaAA-DiAC8)缔合行为取决于聚合物浓度、疏水单体用量及介质的极性.     

疏水改性pH响应型智能水凝胶P(HEMA-NaAA-DiAC16)的制备及其溶胀性能

以二烯丙基胺和1-溴代十六烷为原料合成了疏水单体N,N-二烯丙基正十六烷胺(DiAC16),用FTIR、1H NMR 和元素分析对其进行了表征。 以2-羟基甲基丙烯酸乙酯(HEMA)、丙烯酸(AA)和N,N-二烯丙基正十六烷胺为共聚单体,N,N′-亚甲基双丙烯酰胺(BIS)为交联剂,十二烷基硫酸钠(SDS)为表面活性剂,过硫酸铵-四甲基乙二胺(TMEDA)为引发体系,制得的疏水改性智能水凝胶P(HEMA-NaAA-DiAC16)具有pH敏感特性。 研究了DiAC16、NaAA、BIS用量及pH值和离子强度等因素对水凝胶P(HEMA-NaAA-DiAC16)溶胀性能的影响。 结果表明,凝胶在水中的平衡溶胀率(为78.9～163.91),随DiAC16、BIS用量的增加和NaAA用量的减少而减少,n值(一般在0.5~1.0之间)随DiAC16、NaAA和BIS用量的增加而增加,为非Fickian扩散。 水凝胶的吸水溶胀是放热过程,ΔHm在-2.09～-3.64 kJ/mol,ΔHm的绝对值随DiAC16用量的减少、NaAA用量和BIS用量的增加而增大,聚合物与水的亲和力逐渐增强。 随离子强度的增强,平衡溶胀率下降。     

疏水改性pH敏感水凝胶P(HEMA-NaAA-DiAC_(16))的制备及其溶胀性能

以二烯丙基胺和1-溴代十六烷为原料合成了疏水单体N,N-二烯丙基正十六烷胺(DiAC16),用FTIR、1H NMR和元素分析对其进行了表征。以2-羟基甲基丙烯酸乙酯(HEMA)、丙烯酸(AA)和N,N-二烯丙基正十六烷胺为共聚单体,N,N'-亚甲基双丙烯酰胺(BIS)为交联剂,十二烷基硫酸钠(SDS)为表面活性剂,过硫酸铵-四甲基乙二胺(TMEDA)为引发体系,制得的疏水改性智能水凝胶P(HEMA-NaAA-DiAC16)具有pH敏感特性。研究了DiAC16、NaAA、BIS用量及pH值和离子强度等因素对水凝胶P(HEMA-NaAA-DiAC16)溶胀性能的影响。结果表明,凝胶在水中的平衡溶胀率(为78.9~163.91),随DiAC16、BIS用量的增加和NaAA用量的减少而减少,n值(一般在0.5~1.0之间)随DiAC16、NaAA和BIS用量的增加而增加,为非Fickian扩散。水凝胶的吸水溶胀是放热过程,ΔH m在-2.09~-3.64 kJ/mol,ΔH m的绝对值随DiAC16用量的减少、NaAA用量和BIS用量的增加而增大,聚合物与水的亲和力逐渐增强。随离子强度的增强,平衡溶胀率下降。     

荧光探针法研究疏水改性聚丙烯酰胺溶液的疏水缔合行为

采用胶束共聚 共水解方法合成疏水改性水溶性聚合物聚(丙烯酰胺/丙烯酸钠/N 辛基丙烯酰胺)[P(AM/NaAA/C8AM)],并以芘为荧光探针,应用稳态荧光光谱法研究了它的疏水缔合行为。结果表明,随聚合物浓度、疏水单体摩尔分数、疏水侧链长和温度的增加,疏水缔合作用增强;不同疏水单体含量的P(AM/NaAA/C8AM)的临界缔合浓度为1.5~3.0 g/L;表面活性剂十二烷基硫酸钠(SDS)与P(AM/NaAA/C8AM)发生了强烈的疏水相互作用,形成混合胶束,得到SDS的临界胶束浓度(CMC)为8×10-3 mol/L;由于聚合物链上羧基的存在,使其具有良好的 pH敏感性,随 pH值的增大,P(AM/NaAA/C8AM)的疏水缔合作用呈现先减弱后恒定再增强的变化。     

环糊精功能化疏水缔合丙烯酰胺聚合物的制备与性能评价

以十六烷基二甲基烯丙基氯化铵(C₁₆DMAAC)为疏水单体、烯丙基环糊精(A-CD)为环糊精功能化单体,与丙烯酰胺(AM)通过自由基共聚作用制备了环糊精功能化疏水缔合丙烯酰胺聚合物P(AM/A-CD/C₁₆DMAAC)。采用红外光谱和电子扫描电镜对P(AM/A-CD/C₁₆DMAAC)的结构进行表征。并考察了聚合物的水溶性、粘浓性质、特性粘数和粘均分子量。发现聚合物具有良好的空间结构和溶解特性,临界缔合浓度为1600mg/L,粘均分子量达5.5×10⁶g/mol,聚合物具备作为三次采油的应用潜能。     

聚(丙烯酰胺/丙烯酸钠/N,N-二辛基丙烯酰胺)与表面活性剂的相互作用

利用粘度法研究了孪尾疏水缔合水溶性聚(丙烯酰胺/丙烯酸钠/N,N-二辛基丙烯酰胺)[P(AM/NaAA/D iC8AM)]与表面活性剂十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、壬基酚聚氧乙烯醚(OP-10)的相互作用。研究表明SDS、CTAB的加入,能显著地降低P(AM/NaAA/D iC8AM)水溶液的临界缔合浓度。表明P(AM/NaAA/D iC8AM)与SDS、CTAB的疏水缔合作用较强,而与OP-10的疏水缔合作用较弱。     

孪尾疏水缔合三元共聚物的粘度行为:水解度的影响

以十二烷基硫酸钠(SDS)为表面活性剂,利用氧化还原体系、采用前加碱共聚-共水解的方法制备了孪尾疏水缔合水溶性三元共聚物聚(丙烯酰胺／丙烯酸钠／N,N-二己基丙烯酰胺)[P(AM/NaAA／DiC6AM)],研究了P(AM／NaAA／DiC6AM)稀溶液及亚浓溶液的性能。随理论水解度的增加,P(AM／NaAA／DiC6AM)水溶液的特性粘数[η]增加,Huggins常数KH减小。P(AM／NaAA／DiC6AM)水溶液的表现粘度随理论水解度的增加而增加,随温度、剪切速率的增加而降低,随剪切速率的增加开始时降低较快而后变化较小。P(AM／NaAA/DiC6AM)在盐溶液中随NaCl、CaCl2质量浓度的增加,出现盐增粘现象;理论水解度不同的P(AM／NaAA／DiC6AM)与SDS水溶液的表现粘度在wSDS=0．050～0．400g／L范围内随SDS质量浓度的变化差别不大。     

SET-LRP法制备星型疏水缔合水溶性聚合物

采用丙烯酰胺(AM)、2-丙烯酰胺基-2-甲基丙磺酸钠(NaAMPS)以及N-叔丁基丙烯酰胺(NtBA)为共聚单体,以Cu~0粉/三(2-二甲氨基乙基)胺(Me_6-TREN)为催化体系,四氯化碳(CCl_4)为引发剂,利用单电子转移自由基聚合(SET-LRP)方法合成星型疏水缔合水溶性聚合物P(AM/NtBA/NaAMPS)。采用控制变量法分别考察了引发温度、疏水单体含量、AMPS含量、引发剂用量、催化剂铜、单体浓度等因素对聚合物相对分子质量的影响,确定了最佳聚合条件并考察了聚合物的耐温抗盐性能。结果表明,当单体浓度为35%,引发温度为25℃,AM、AMPS、NtBA分别占单体总量的93.6%、5%、1.4%(摩尔比),引发剂质量分数为0.4942%,催化剂铜的质量分数为0.0848%,钝化剂的质量分数为0.1192%时,所得星型疏水缔合水溶性聚合物P(AM/NtBA/NaAMPS)的相对分子质量出现最高值为267万,同时具有一定的耐温抗盐性,其溶液性能与线型化的P(AM/NtBA/NaAMPS)相似,且在相同浓度下CaCl_2对聚合物表观粘度的影响比NaCl大。     

AM/AA/DMDAAC/OAM疏水缔合的两性共聚物的合成及性能研究

以十八醇为原料,制备长链疏水单体N-十八烷基丙烯酰胺(OAM)。以丙烯酰胺(AM)、丙烯酸(AA)、二甲基二烯丙基氯化铵(DMDAAC)、N-十八烷基丙烯酰胺(OAM)为单体,通过胶束聚合法合成了水溶性疏水缔合两性四元共聚物。利用FT-IR、1HNMR、DTA-TG对聚合物的结构和热稳定性进行分析,考察了疏水基团摩尔分数、聚合物浓度对聚合物溶液表观粘度、储能模量、耗能模量等流变性能的影响,并对四元共聚物溶液的性能进行评价。结果表明,疏水两性共聚物具有很好的耐温、抗盐、耐剪切等优异性能。     

稳态和动态荧光研究疏水缔合共聚物P(AM/POEA)的自缔合行为和聚集体

应用稳态和动态荧光光谱方法,包括荧光探针、标记荧光和荧光淬灭等研究了共聚物P(AM/POEA)在水溶液中的自缔合性质.这种共聚物由丙烯酰胺(AM)和少量疏水单体2-苯氧乙基丙烯酸酯(POEA)组成.实验结果表明这类共聚物的自缔合行为和聚集体结构主要取决于聚合物的链结构和浓度.由胶束共聚合方法得到具有多嵌段结构的共聚物,它们容易发生疏水缔合,并产生很强的增粘作用,而由普通共聚合方法得到的无规共聚物却没有这些性质.同时这类聚合物的缔合类型及其增粘能力也直接与共聚物中的疏水体含量相关,随疏水体含量增加,由于分子间和分子内缔合的竞争,出现粘度先增后降的现象.在荧光研究的基础上提出了多分子聚合物聚集体的结构模型,它随聚集体浓度增加,进一步形成多联聚集体和网状结构.同时还观察到聚集体中疏水体有序排列现象.     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.     

LixZryOz三元化合物的制备及表征

采用高温固相法制备了4种高纯度晶相组成的LixZryOz三元化合物,研究了焙烧温度、时间、反应物的种类和初始反应物物质的量比对产物组成的影响,进一步用XRD、SEM及BET分析方法对产物的晶相结构、表面形貌及比表面积进行了表征.实验结果表明,Li2CO3与ZrO2在适当条件下可以合成得到单斜相Li3ZrO3;以LiOH替代Li2CO3,在适当条件下可以分别合成得到四方相Li2ZrO3和三斜/单斜相Li6Zr2O7;进一步以Zr(NO3)4·5H2O代替Zr02,可将单斜相Li6Zr2O7的制备时间由96 h缩短至24 h.SEM照片显示产物硬团聚明显,粒径分布在1～10μm间,BET分析表明样品比表面积处于1.0～9.0 m2·g-1间分布,反应过程中锂的过量以及长时间高温焙烧是引起产物粒径长大和产生硬团聚的主要原因.