枝晶状Pt 薄膜的制备及其特殊红外效应

采用方波电位, 在10×10^-3 mol·L^-1 K₂PtCl₆+3×10^-4 mol·L^-1 PbAc₂+0.5 mol·L^-1 HClO₄溶液中, 于本体Pt 电极上电沉积制备出枝晶状Pt 薄膜. 随着沉积时间的增加, 枝晶长度逐渐由400 nm增加到900 nm, 且枝晶上的小晶粒(~10 nm大小)变得密集. 根据循环伏安(CV)曲线中氢吸脱附电量可得出Pt 薄膜具有中等粗糙度(C_r=9-36), 且电极表面的粗糙度随着沉积时间增加而增大. 观察到Pt 薄膜上吸附态CO的原位红外光谱具有明显的增强吸收效应, 当沉积时间为6 min 时所制得的枝晶Pt 电极的红外增强效应最大. CO呈现多种谱峰形状, 随着沉积时间的增加, 谱峰形状依次为左高右低的双极峰(类Fano 红外效应), 单极向下(表面增强红外吸收), 左高右低的双极峰, 单极向上(异常红外效应), 左低右高的双极峰和单极向下. 这表明纳米材料薄膜所呈现出的特殊红外性能, 与纳米材料的尺度和聚集状态等密切相关. 所制备的枝晶状Pt 薄膜有望为深入认识纳米材料的特殊红外性能提供一个良好的模型材料.     

Measuring molecular order in poly(3-alkylthiophene) thin films with polarizing spectroscopies

We measured the molecular order of poly(3-alkylthiophene) chains in thin films before and after melting through the combination of several polarized photon spectroscopies: infrared (IR) absorption, variable angle spectroscopic ellipsometry (SE), and near-edge X-ray absorption fine structure (NEXAFS). The data from the various techniques can be uniformly treated in the context of the dielectric constant tensor epsilon for the film. The combined spectroscopies allow determination of the orientation distribution of the main-chain axis (SE and IR), the conjugated pi system normal (NEXAFS), and the side-chain axis (IR). We find significant improvement in the backbone order of the films after recrystallization of the material at temperatures just below the melting temperature. Less aggressive thermal treatments are less effective. IR studies show that the changes in backbone structure occur without significant alteration of the structure of the alkyl side chains. The data indicate that the side chains exhibit significant disorder for all films regardless of the thermal history of the sample.     

Study of anomalous infrared properties of nanomaterials through effective medium theory

Effective medium theory is introduced into a three-layer model to study the anomalous IR properties of nanostructured Pt films. A composite system is set up for the nanostructured film together with adsorbates and water around it. The anomalous IR spectral features, which exhibit a transition from enhanced (or normal) IR absorption to Fano-type bipolar line shape and, finally, to enhanced anomalous IR absorption (the abnormal infrared effects) along with the change in structure and size of nanomaterials, as observed through experiments for CO molecule adsorption, are elucidated by an increase in the volume fraction of metal in the composite system and the effective thickness of the composite system. The theoretical simulation results illustrate that the spectral line shape of IR absorption depends strongly on the volume fraction of metal, while the intensity of the IR band is directly proportional to the effective thickness. This study has revealed, through a physical optical aspect of interaction of CO molecules with nanostructured metal films, one of the possible origins of anomalous IR properties and has shed light on interpreting the peculiar properties of nanomaterials.     

PM IRRAS investigation of thin silica films deposited on gold. Part 1. Theory and proof of concept

Polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) was successfully used for the first time to characterize an optically transparent thin oxide film. SiO2 layers of 7 nm thickness were synthesized by plasma enhanced chemical vapor deposition (PECVD) on 200 nm thick gold covered glass slides. Despite the fact that silica is transparent and absorptive to IR radiation when deposited in the form of thin films on a gold surface, it preserves the high metallic reflectivity for the IR light. At grazing angles of incidence of the IR beam, the enhancement of the normal component of the electric field at the interface is comparable to that of Au alone. In addition, the analysis of the structure of a 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid monolayer deposited using the Langmuir-Blodgett technique is demonstrated.     

Harvesting infrared photons with tricarbocyanine dye clusters

The absorption of 4,5-benzoindotricarbocyanine dye (IR125) in the infrared can be tuned by controlling the type of aggregation in different media. Molecular clusters of this dye formed in a mixed solvent show broad absorption in the 550-950 nm region as compared to the absorption bands of J- and H-type aggregates. The molecular clusters of the carbocyanine dye are electrophoretically deposited as thin film on optically transparent electrodes using a dc electric field. These tricarbocyanine dye cluster films are photoactive in the infrared region and produce cathodic current when employed as photocathode in a photoelectrochemical cell. Transient absorption spectroscopy of the molecular clusters show short-lived singlet state in the picosecond time scale (lifetime 6 ps) and a charge separated state in the nanosecond time scale. Implication of such dye cluster films for harvesting infrared photons in a photoelectrochemical cell is discussed.     

酸性溶液中过渡金属及合金纳米薄膜电极的异常红外效应研究

以循环伏安方法在玻碳载体上制备纳米级厚度的过渡金属 (Pt,Pd ,Rh ,Ru)和合金 (PtPd ,PtRu)薄膜电极 ,并运用原位FTIR反射光谱研究了CO的吸附过程 .发现所制备的纳米薄膜电极均具有异常红外效应 ,即与本体金属电极相比较 ,吸附在纳米薄膜电极上的CO分子的红外吸收被显著增强 ,并且红外谱峰方向倒反 .本文的结果进一步证明异常红外效应是一种新的、普遍的现象 ,主要取决于过渡金属或合金膜的结构和厚度 .对异常红外效应的深入认识 ,不仅将推动红外反射光谱及界面电化学理论的发展 ,而且将在表面和界面分析中得到广泛应用 .     

Dispersion of functional tetraphenylporphyrin-ligated metal into ultra-thin flexible acrylate films. 1. Preparation of thin films

As functional metal complexes, copper phthalocyanine (CuPc) and Cobalt (II) meso-tetraphenylporphyrin (CoTPP) were chosen to prepare metal complex/polymer hybrid thin films which were prepared by metal complex sublimation and reactive monomer evaporation onto the glass substrate in the bell jar reactor in vacuum conditions. The polarized transmission micrograph images show that the film deposited at 80 °C contains uniformly dispersed tiny grains and the film deposited at 30 °C is amorphous and homogeneous. As the deposition rate increases, the crystalline clusters were found and were dispersed uniformly. Those crystalline clusters are not to be developed by recrystallization process. Deposited metal complex/acrylate hybrid thin films were in situ photopolymerized. The kinetics of photopolymerization was investigated by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The thickness of the films was about 200 nm. The reactive monomer acts as a solvent to avoid the recrystallization of metal complexes and to have two-compositional continuous phase. The percent of metal complex can be adjusted up to 60% by controlling the metal complex sublimation rate. A good achievement in the uniformity and continuity of the film matrix has been made and the recrystallization of metal complex in the hybrid films has not been observed.     

In situ FTIR spectroscopic studies of CO adsorption on electrodes with nanometer-scale thin films of ruthenium in sulfuric acid solutions

A nanometer-scale thin film of ruthenium supported on glassy carbon (nm-Ru/GC) was prepared by electrochemical deposition under cyclic voltammetric conditions. Scanning tunneling microscopy (STM) was used to investigate the structure and to measure the thickness of the thin film. It has been found that the Ru thin film is composed of layered Ru crystallites that appear in a hexagonal form with dimensions of about 250 nm and thickness around 30 nm. In situ FTIR spectroscopic studies demonstrated that such a nanostructured Ru thin film exhibits abnormal infrared effects (AIREs) for CO adsorption (G.Q. Lu et al., Langmuir 16 (2000) 778). In comparison with CO adsorbed on a massive Pt electrode, the IR absorption of CO_ad on nm-Ru/GC was significantly enhanced. Moreover, the direction of CO_ad bands is inverted and the full width at half maximum of CO_ad bands is increased. It has been revealed that the enhancement factor of IR absorption of CO adsorbed on nm-Ru/GC electrodes depends strongly on the thickness of the Ru film. An asymmetrical volcano relationship between the enhancement factor and the thickness of the Ru film has been obtained. The maximum value of the enhancement factor was measured as 25.5 on a nm-Ru/GC electrode of Ru film thickness around 86 nm. The present study has contributed to exploration of the particular properties of nanostructured Ru film material and to the origin of the abnormal infrared effects.     

Determination of the molecular orientation of very thin films on solid substrates: surface liquid crystal layers and rubbed polyimide films

The molecular orientation of very thin films on solid substrates can be determined quantitatively by measuring the polarized infrared (IR) absorption spectra of samples as a function of angle of incidence. The quantitative molecular orientation is derived by fitting the incident angle dependence and the dichroic ratio with theoretical calculations. We applied this method to a technologically important system: liquid crystal (LC)/rubbed polyimide film. To understand the alignment mechanism of LC molecules in contact with rubbed polyimide films, we have quantitatively determined the molecular orientation of rubbed polyimide films and a surface LC layer in contact with a rubbed polyimide film. In this paper two relations are discussed: (1) correlation between the inclination angle of polyimide backbone structures in rubbed films and the pretilt angle of bulk LC in contact with them, and (2) relation among the molecular orientation of a rubbed polyimide film and those of surface and bulk LC layers in contact with it.     

Vibrational and surface-enhanced vibrational spectra of 6-nitrochrysene

The infrared and Raman spectra of solids and thin solid films of 6-nitrochrysene, its electronic spectra, and resonance Raman scattering (RRS) obtained with UV-laser excitation at 325 nm are reported. The vibrational assignment is supported by ab initio computations at the B3LYP/6-311G(d, p) level of theory. The molecular organization in nanometric films evaporated onto smooth metal surfaces of silver and copper was probed using reflection-absorption infrared spectroscopy (RAIRS). The results of the surface-enhanced Raman scattering (SERS) and surface-enhanced infrared absorption (SEIRA) obtained from nanometric films evaporated onto silver island films are also discussed. It was found that the molecule efficiently interacts with silver island film surfaces, and that the interaction leads to extensive photochemical reaction at the metal surface under laser illumination.     

Influence of local structure on local electric field in Island‐like silver films

The infrared absorption enhancement phenomenon in the normal configuration of vacuum‐evaporated metal films on a transparent substrate is known to depend not only on the metal film morphology but also on the local structures of metal particles. To date, however, few studies have examined the effect of local structure on the phenomenon. Size distributions of islands and gaps, along with the volume fractions of Ag in thin films, were measured using scanning electron microscopy as a function of film thickness. The local structure of Ag nano clusters deposited on silicon substrates was investigated using a total conversion electron yield X‐ray absorption fine structure (XAFS) method at the Ag K‐edge. We observed a correlation between the electromagnetic field intensity at the surface as evaluated by IR measurement and the coordination numbers evaluated by XAFS. We found that the film morphology had a greater effect on resonant and nonresonant contributions than did the local structure of a particle. Copyright © 2006 John Wiley & Sons, Ltd.     

Development of plasticised PVC sensing films for the determination of BTEX compounds in aqueous samples

A novel plasticised PVC polymer membrane as a sensing film for the determination of BTEX compounds using ATR-FTIR spectroscopy is demonstrated. A range of 10 plasticised PVC phases have been investigated using toluene and tetrachloroethylene as test analytes. Both analyte enrichment rates and infrared absorbance values were considered when choosing a suitable polymer for sensing. An enhancement in analyte absorbance at the characteristic IR absorption bands was noted as the plasticiser concentration in the film was increased. 2% PVC with 75% diisooctyl azelate was found to show promising results for simultaneous determination of the BTEX compounds. All BTEX analytes can be measured in less than 8 min. A study of a multicomponent sample demonstrated that analyte enrichment times were influenced by the presence of even one additional analyte component in the sample.     

Silica-stabilized gold island films for transmission localized surface plasmon sensing

Ultrathin gold films prepared by evaporation of sub-percolation layers (typically up to 10 nm nominal thickness) onto transparent substrates form arrays of well-defined metal islands. Such films display a characteristic surface plasmon (SP) absorption band, conveniently measured by transmission spectroscopy. The SP band intensity and position are sensitive to the film morphology (island shape and inter-island separation) and the effective dielectric constant of the surrounding medium. The latter has been exploited for chemical and biological sensing in the transmission localized surface plasmon resonance (T-LSPR) mode. A major concern in the development of T-LSPR sensors based on Au island films is instability, manifested as change in the SP absorbance following immersion in organic solvents and aqueous solutions. The latter may present a problem in the use of Au island-based transducers for biological sensing, usually carried out in aqueous media. Here, we describe a facile method for stabilizing Au island films while maintaining a high sensitivity of the SP absorbance to analyte binding. Stabilization is achieved by coating the Au islands with an ultrathin silica layer, ca. 1.5 nm thick, deposited by a sol-gel procedure on an intermediate mercaptosilane monolayer. The silica coating is prepared using a modified literature procedure, where a change in the reaction conditions from room temperature to 90 degrees C shortened the deposition time from days to hours. The system was characterized by UV-vis spectroscopy, ellipsometry, XPS, HRSEM, AFM, and cyclic voltammetry. The ultrathin silica coating stabilizes the optical properties of the Au island films toward immersion in water, phosphate buffer saline (PBS), and various organic solvents, thus providing proper conditions where the optical response is sensitive only to changes in the effective dielectric constant of the immediate environment. The silica layer is thin enough to afford high T-LSPR sensitivity, while the hydroxyl groups on its surface enable chemical modification for binding of receptor molecules. The use of silica-encapsulated Au island films as a stable and effective platform for T-LSPR sensing is demonstrated.     

RF-plasma polymerization and characterization of polyaniline

Suitable modifications are done in a RF sputtering set up to facilitate synthesis of polyaniline thin film by RF-plasma polymerization process. The synthesized films are characterized by FTIR, XRD, Ellipsometry, UV-visible absorption & reflection and SEM. The films prepared are highly cross-linked, amorphous in nature and have band gap of 2.07 eV. SEM images show the uniformity in film morphology. The refractive index of the films is determined to be 1.11 and dielectric constant is 1.12 at a wavelength 620 nm in the visible region.     

ATR-SEIRAS study of the adsorption of acetate anions at chemically deposited silver thin film electrodes

The adsorption of acetate anions at silver thin film electrodes has been studied by in-situ infrared spectroscopy experiments with a Kretschmann internal reflection configuration. Stable silver thin films were chemically deposited on germanium substrates. Ex-situ STM images show mean grain sizes ranging from ca. 20 to 90 nm for deposition times between 2 and 20 min, respectively. The thickness of the silver film, measured by AFM, is typically around 10 nm for a deposition time of 10 min and increases up to 50 nm for a deposition time of 20 min. Roughness factors around 2.3 have been obtained for the silver films from the charge involved in lead underpotential deposition (UPD). A noticeable enhancement of the infrared absorption of adsorbed species (SEIRA effect) is observed when the silver films are used as electrodes under internal total reflection conditions. Maximum intensities of the adsorbate bands were observed for a deposition time of 10 min and an angle of incidence around 65 degrees . The potential-dependent infrared spectra of acetate and interfacial water are consistent with previously proposed models involving the existence of weakly hydrogen-bonded water molecules at potentials below the potential of zero charge and the reorientation of water molecules at potentials above the potential of zero charge. Results reported in this work suggest a weak interaction between acetate and water molecules adsorbed at the silver thin film electrodes.     

Diffusion measurements using ATR‐FTIR spectroscopy: Acetone diffusion in polypropylene—use of penetrant fluid pressure to improve sample/IRE contact

In this article, we present a simple method for improving the contact between a film sample and the internal reflection element (or crystal) when diffusion into thin polymer films is measured with attenuated total reflectance (ATR)‐Fourier transform infrared spectroscopy. Intimate film/crystal contact is particularly important for making measurements on premade films and materials that cannot be solution‐coated onto the crystal. This method is based on controlling the penetrant fluid pressure above a threshold value (>230 kPa) in the ATR flow cell. Measurements of acetone diffusion into a commercial polypropylene film at 300 K and varied pressures indicated that the diffusion time constant was constant at pressures above this threshold. We also monitored the absorbance of a polymer band that had no overlap with the acetone spectrum to examine whether adequate sample‐film/crystal contact was reached and maintained. From these observations, we concluded that an apparently good match between the experimental data and a model calculation does not alone justify confidence in the accuracy of the calculated diffusion time constant. Additionally, the practice of using a reference band to correct the uncertainty in absorbance for bands of interest (due to imperfect sample/crystal contact) yielded inconsistent results. We also report further measurements of acetone diffusivity in a polypropylene film at temperatures ranging from 278 to 308 K that yielded an estimated activation energy for diffusion of 98 kJ/mol. © 2000 John Wiley & Sons, Inc.* J Polym Sci B: Polym Phys 38: 1773–1787, 2000     

Thin film structure of tetraceno[2,3-b]thiophene characterized by grazing incidence X-ray scattering and near-edge X-ray absorption fine structure analysis

Understanding the structure-property relationship for organic semiconductors is crucial in rational molecular design and organic thin film process control. Charge carrier transport in organic field-effect transistors predominantly occurs in a few semiconductor layers close to the interface in contact with the dielectric layer, and the transport properties depend sensitively on the precise molecular packing. Therefore, a better understanding of the impact of molecular packing and thin film morphology in the first few monolayers above the dielectric layer on charge transport is needed to improve the transistor performance. In this Article, we show that the detailed molecular packing in thin organic semiconductor films can be solved through a combination of grazing incidence X-ray diffraction (GIXD), near-edge X-ray absorption spectra fine structure (NEXAFS) spectroscopy, energy minimization packing calculations, and structure refinement of the diffraction data. We solve the thin film structure for 2 and 20 nm thick films of tetraceno[2,3-b]thiophene and detect only a single phase for these thicknesses. The GIXD yields accurate unit cell dimensions, while the precise molecular arrangement in the unit cell was found from the energy minimization and structure refinement; the NEXAFS yields a consistent molecular tilt. For the 20 nm film, the unit cell is triclinic with a = 5.96 A, b = 7.71 A, c = 15.16 A, alpha = 97.30 degrees, beta = 95.63 degrees, gamma = 90 degrees; there are two molecules per unit cell with herringbone packing (49-59 degree angle) and tilted about 7 degrees from the substrate normal. The thin film structure is significantly different from the bulk single-crystal structure, indicating the importance of characterizing thin film to correlate with thin film device performance. The results are compared to the corresponding data for the chemically similar and widely used pentacene. Possible effects of the observed thin film structure and morphology on charge carrier mobility are discussed.     

Atmospheric Pressure Plasma Discharge for Polysiloxane Thin Films Deposition and Comparison with Low Pressure Process

An atmospheric pressure dielectric barrier plasma discharge has been used to study a thin film deposition process. The DBD device is enclosed in a vacuum chamber and one of the electrodes is a rotating cylinder. Thus, this device is able to simulate continuous processing in arbitrary deposition condition of pressure and atmosphere composition. A deposition process of thin organosilicon films has been studied reproducing a nitrogen atmosphere with small admixtures of hexamethyldisiloxane (HMDSO) vapours. The plasma discharge has been characterized with optical emission spectroscopy and voltage-current measurements. Thin films chemical composition and morphology have been characterized with FTIR spectroscopy, atomic force microscopy (AFM) and contact angle measurements. A strong dependency of deposit character from the HMDSO concentration has been found and then compared with the same dependency of a typical low pressure plasma enhanced chemical vapour deposition process.     

Enhanced Fluorescence Using an Optical Interference Mirror Overlaid with Silver Island Film

Fluorophores overlaid on an optical interference mirror composed of a metal and thin dielectric layer demonstrate enhanced fluorescence. Fluorescence is also enhanced by silver nanostructures such as silver island films, which excite localized surface plasmon resonance. An optical interference mirror surface was overlaid with a silver island film to amplify the fluorescence enhancement. The optimal thickness of the silver island film (100 nm) was evaluated from transmittance and surface roughness measurements. At this thickness, the fluorescence was amplified sixteen-fold. The thickness of the interference layer was optimized at 40 nm providing a one hundred-sixty fold fluorescence enhancement of rhodamine B. However, only a four-fold improvement in sensitivity was achieved for the determination of a labeled streptavidin using biotin immobilized on the silver island film interference mirror.     

高分子化8-羟基喹啉锂的合成与静电自组装研究

设计合成了甲基丙烯酸二甲氨基乙酯(DM)含量为9.69%的丙烯酸甲酯共聚物(CPA),将制得的5-氯甲基-8-羟基喹啉(CHQ)挂接到CPA上,得到季铵型高分子化8-羟基喹啉(CPA-HQ)后,与金属离子Li+配位得到CPA-HQ-Li.化合物结构通过红外、紫外和荧光光谱等表征.多层超薄膜用CPA-HQ-Li和聚阴离子电解质(全氟磺酸)通过静电自组装制得.自组装膜的紫外和荧光相对于溶液(溶剂为四氢呋喃)发生了红移,膜的紫外吸收强度随组装膜层数增加线性增大,荧光强度随膜层数增加线性递减.高分子化8-羟基喹啉锂溶液和自组装膜的紫外和荧光光谱与文献报道一致.实验结果表明这种材料可用于有机电致发光器件(OLEDs)的制备.