A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

A new colorimetric and fluorescent ratiometric sensor for Hg2+ based on 4-pyren-1-yl-pyrimidine

A novel fluorescent ratiometric chemosensor based on 4-pyren-1-yl-pyrimidine (PPM) has been designed and prepared for the detection of Hg²⁺ in the presence of other competing metal ions in acetonitrile. The photo exhibits fluorescence color change of PPM from blue to green without and with Hg²⁺, which red shift of wavelength about 105 nm in fluorescence emission spectra. It can serve as a highly selective chemodosimeter for Hg²⁺ with ratiometric and naked-eye detection. The photophysical properties of PPM confirmed a 2:1 (PPM–Hg²⁺) binding model and the spectral response toward Hg²⁺ was proved to be reversible.     

Rhodamine-based chemodosimeter for fluorescent determination of Hg in 100% aqueous solution and in living cells

A rhodamine spirolactam derivative (1) bearing a hydrophilic carboxylic acid group is developed as a fluorescent chemodosimeter for bivalent mercury ions (Hg²⁺) in 100% aqueous solution. It exhibits a highly sensitive “turn-on” fluorescent response toward Hg²⁺ with a 42-fold fluorescence intensity enhancement under 1 equiv. of Hg²⁺ added. The chemodosimeter can be applied to the quantification of Hg²⁺ with a linear range covering from 3.0 × 10⁻⁷ to 1.0 × 10⁻⁵ M and a detection limit of 9.7 × 10⁻⁸ M. Most importantly, the fluorescence changes of the chemodosimeter are remarkably specific for Hg²⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the experiment results show that the response behavior of 1 towards Hg²⁺ is pH independent in neutral condition (pH 5.0–8.0) and the response is fast (response time less than 3 min). Furthermore, the ring-opening mechanism of the rhodamine spirolactam induced by Hg²⁺ was supported by NMR, MS, and DFT theoretical calculations. In addition, the proposed chemodosimeter has been used to detect Hg²⁺ in water samples and image Hg²⁺ in living cells with satisfying results.     

A new colorimetric chemodosimeter for Hg2+ based on charge-transfer compound of N-methylpyrrole with TCNQ

Reaction of N-methylpyrrole and 7,7,8,8-tetracyanoquinodimethane (TCNQ) furnishes an intense blue unsymmetrical charge-transfer compound through regioselective attachment of tricyanoquinodimethane at the 2-position of N-methylpyrrole which was found to be selective chemodosimeter for Hg²⁺ ions in CH₃CN:H₂O mixture (1:1 v/v, pH = 7.0, 0.01 M HEPES, 0.15 M NaCl) as well as in the solid state when supported on silica, over a variety of metal ions. A plausible mechanism for the sensing process has been proposed and supported through the characterization of the resulting Hg²⁺ complex and the density functional theory (DFT) studies.     

Determination of Hg by on-line separation and pre-concentration with atmospheric-pressure solution-cathode glow discharge atomic emission spectrometry

A simple and sensitive method to determine Hg²⁺ was developed by combining solution-cathode glow discharge atomic emission spectrometry (SCGD-AES) with flow injection (FI) based on on-line solid-phase extraction (SPE). We synthesized l-cysteine-modified mesoporous silica and packed it in an SPE microcolumn, which was experimentally determined to possess a good mercury adsorption capacity. An enrichment factor of 42 was achieved under optimized Hg²⁺ elution conditions, namely, an FI flow rate of 2.0 mL min⁻¹ and an eluent comprised of 10% thiourea in 0.2 mol L⁻¹ HNO₃. The detection limit of FI–SCGD-AES was determined to be 0.75 μg L⁻¹, and the precision of the 11 replicate Hg²⁺ measurements was 0.86% at a concentration of 100 μg L⁻¹. The proposed method was validated by determining Hg²⁺ in certified reference materials such as human hair (GBW09101b) and stream sediment (GBW07310).     

A sensitive resonance light scattering spectrometry of trace Hg with sulfur ion modified gold nanoparticles

A new resonance light scattering (RLS) spectrometric method for mercury ions (Hg²⁺) in aqueous solutions with sulfur ion (S²⁻) modified gold nanoparticles (Au-NPs-S) has been developed in this contribution. It was found that S²⁻ at the surface of Au-NPs resulting from the surface modification can interact with Hg²⁺ to form very stable S-Hg-S bonds when Hg²⁺ concentration is lower than that of S²⁻, resulting in the aggregation of Au-NPs-S and causing enhanced RLS signals. The enhanced RLS intensities (ΔI_RLS) characterized at 392 nm were found to be proportional to the concentration of Hg²⁺ in the range of 0.025-0.25 μmol L⁻¹ with a detection limit (3σ) of 0.013 μmol L⁻¹. Our results showed that this approach has excellent selectivity for Hg²⁺ over other substances in aqueous solutions.     

Ratiometric fluorescence detection of mercuric ion based on the nanohybrid of fluorescence carbon dots and quantum dots

A novel nanohybrid ratiometric fluorescence probe comprised of carbon dots (C-dots) and hydrophilic CdSe@ZnS quantum dots (QDs) has been developed by simply mixing the blue-emission C-dots with red-emission carboxylmethyldithiocarbamate modified CdSe@ZnS QDs (GDTC-QDs). The nanohybrid ratiometric fluorescence probe exhibits dual emissions at 436 nm and 629 nm under a single excitation wavelength. Due to the strong chelating ability of GDTC on the surface of QDs to mercuric ion (Hg²⁺), the fluorescence of the GDTC-QDs in the nanohybrid system could be selectively quenched in the presence of Hg²⁺ while the fluorescence of the C-dots remained constant, resulting in an obviously distinguishable fluorescence color evolution (from red to blue) of the nanohybrid system. The detection limit of this method was found to be as low as 0.1 μM. Furthermore, the recovery result for Hg²⁺ in real samples including tap water and lake water by this method was satisfying, suggesting its potential application for Hg²⁺ sensing.     

Ultrasensitive mercury(II) ion detection by europium(III)-doped cadmium sulfide composite nanoparticles

With the biomolecule glutathione (GSH) as a capping ligand, Eu³⁺-doped cadmium sulfide composite nanoparticles were successfully synthesized through a straightforward one-pot process. An efficient fluorescence energy transfer system with CdS nanoparticles as energy donor and Eu³⁺ ions as energy accepter was developed. As a result of specific interaction, the fluorescence intensity of Eu³⁺-doped CdS nanoparticles is obviously reduced in the presence of Hg²⁺. Moreover, the long fluorescent lifetime and large Stoke's shift of europium complex permit sensitive fluorescence detection. Under the optimal conditions, the fluorescence intensity of Eu³⁺ at 614 nm decreased linearly with the concentration of Hg²⁺ ranging from 10 nmol L⁻¹ to 1500 nmol L⁻¹, the limit of detection for Hg²⁺ was 0.25 nmol L⁻¹. In addition to high stability and reproducibility, the composite nanoparticles show a unique selectivity towards Hg²⁺ ion with respect to common coexisting cations. Moreover, the developed method was applied to the detection of trace Hg²⁺ in aqueous solutions. The probable mechanism of reaction between Eu³⁺-doped CdS composite nanoparticles and Hg²⁺ was also discussed.     

A multi-channel sensor based on 8-hydroxyquinoline ferrocenoate for probing Hg(II) ion

A new sensing molecule 8-hydroxyquinoline ferrocenoate (Fc-Q) which combines ferrocene and 8-hydroxyquinoline moieties was synthesized and applied as a multi-channel sensor for the detection of Hg²⁺ ion. Fc-Q can coordinate with Hg²⁺ to give colorimetric, fluorescent and electrochemical responses. Upon complexation with Hg²⁺ ion, the characteristic absorption peak is red-shifted (Δλ = 45 nm), the fluorescent intensity is quenched at 303 nm, and the oxidation peak is cathodic shifted (ΔE_1/2 = −149 mV). Quantitatively analyzed Hg²⁺ ions at the range of ppb level could be achieved by electrochemical response. For the practical application of sensing Hg²⁺ in real world water, Fc-Q modified screen-printed carbon electrodes were obtained for facile, sensitive, and on-site analysis of Hg²⁺.     

A new colorimetric chemodosimeter for mercury ion via specific thioacetal deprotection in aqueous solution and living cells

A sensitive and selective new chemodosimeteric chemosensor (DIBT) for mercury ions was successfully devised and characterized. Upon addition of Hg²⁺ to DIBT, a red-edge absorption band at 972 nm was observed. An important feature for the new chemodosimeter is its high selectivity toward mercury ions over the other competitive species due to Hg²⁺-triggered specific C–S cleavage, making the ‘naked-eye’ detection of mercury ions possible in aqueous solution and living cells such as Candida albicans.     

A rapid Hg sensor based on aza-15-crown-5 ether functionalized 1,8-naphthalimide

A new 1,8-naphthalimide derivative bearing an aza-15-crown-5 macrocycle (1) has been synthesized as a chemosensor for Hg²⁺ by a two-step reaction. The sensor shows selectivity to Hg²⁺ over 11 other metal cations in aqueous media. Upon addition of Hg²⁺, the fluorescence emission of the sensor at 537 nm is significantly quenched along with 22 nm blue-shift that makes this compound a useful sensor for Hg²⁺ measurement.     

A highly selective nanogold-aptamer catalytic resonance scattering spectral assay for trace Hg using HAuCl4-ascorbic acid as indicator reaction

Single strand DNA (ssDNA) was used to modify nanogold to obtain a nanogold-aptamer resonance scattering (RS) probe (NGssDNA) for Hg²⁺, based on the formation of stable thymine-Hg²⁺-thymine (T-Hg²⁺-T) mismatches and aggregation of the released nanogold particles. After removing the aggregated particles by filtrate membrane, the excess NGssDNA in the filtration solution exhibit catalytic effect on the gold particle reaction between HAuCl₄ and ascorbic acid (AA) that appear as RS peak at 596 nm. When Hg²⁺ concentration increased, the RS intensity at 596 nm decreased. The decreased intensity is linear to Hg²⁺ concentration in the range of 0.00008-0.888 ng/mL Hg²⁺, with detection limit of 0.000034 ng/mL. The nanogold-aptamer catalytic RS assay was applied to determination of Hg²⁺ in water with satisfactory results.     

Photophysical properties of rhodamine isomers: A two-photon excited fluorescent sensor for trivalent chromium cation (Cr)

We introduce a new rhodamine-based fluorescent chemosensor, FD8 which exhibits a distinct two-photon excited fluorescence (TPEF) on/off characteristic upon binding Cr³⁺ ions. By coordination with metal cation, conformation of FD8 changes from spirocyclic to open-ring, resulting in remarkable enhancement of absorption and fluorescence both in one- and two-photon excitations. As a result, a 29-fold enhancement of two-photon excited fluorescent intensity was observed when 10 eq. Cr³⁺ was added to the FD8 solution. The detection limit of Cr³⁺ cation concentration down to 1 μM (0.01 eq. of FD8) was achieved under our experimental condition. Besides the excitation within ultraviolet regime by fluorescence resonance energy transfer (FRET) mechanism, the TPEF on/off behavior further extends the excitation to near infrared regime (the biological optimal window of 700-1200 nm), and shows more effective sensitivity. The broad excitation wavelength, on/off fluorescence and high selectivity to Cr³⁺ enable FD8 to be a powerful Cr³⁺ cation sensor with potential application, especially in biological detection. To the best of our knowledge, this is the first report about two-photon fluorescent sensor for Cr³⁺ ions.     

Synthesis of cysteamine-coated CdTe quantum dots and its application in mercury (II) detection

High-quality cysteamine-coated CdTe quantum dots (CA-CdTe QDs) were successfully synthesized in aqueous phase by a facile one-pot method. Through hydroxylamine hydrochloride-promoted kinetic growth strategy, water-soluble CA-CdTe QDs could be obtained conveniently in a conical flask by a stepwise addition of raw materials. The photoluminescence quantum yield (PL QY) of the obtained QDs reached 9.2% at the emission peak of 520 nm. The optical property and the morphology of the QDs were characterized by UV–vis absorption spectra, photoluminescence spectra (PL) and transmission electron microscopy (TEM) respectively. Furthermore, the fluorescence of the resultant QDs was quenched by copper (II) (Cu²⁺) and mercury (II) (Hg²⁺) meanwhile. It is worthy of note that to separately detect Hg²⁺, cyanide ion could be used to eliminate the interference of Cu²⁺. Under the optimal conditions, the response was linearly proportional to the logarithm of Hg²⁺ concentration over the range of 0.08–3.33 μM with a limit of detection (LOD) of 0.07 μM.     

Facile synthesis of N-acetyl-L-cysteine capped ZnS quantum dots as an eco-friendly fluorescence sensor for Hg2+

This paper described an investigation of a novel eco-friendly fluorescence sensor for Hg²⁺ ions based on N-acetyl-l-cysteine (NAC)-capped ZnS quantum dots (QDs) in aqueous solution. By using safe and low-cost materials, ZnS QDs modified by NAC were easily synthesized in aqueous medium via a one-step method. The quantitative detection of Hg²⁺ ions was developed based on fluorescence quenching of ZnS QDs with high sensitivity and selectivity. Under optimal conditions, its response was linearly proportional to the concentration of Hg²⁺ ions in a range from 0 to 2.4 × 10⁻⁶ mol L⁻¹ with a detection limit of 5.0 × 10⁻⁹ mol L⁻¹. Most of common physiologically relevant cations and anions did not interfere with the detection of Hg²⁺. The proposed method was applied to the trace determination of Hg²⁺ ions in water samples. The possible quenching mechanism was also examined by fluorescence and UV-vis absorption spectra.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

Naked-eye colorimetric analysis of Hg2+ with bi-color CdTe quantum dots multilayer films

A novel direct quantificational method through naked-eye colorimetric analysis of Hg²⁺ was constructed based on different degree of the fluorescence quenching of bi-color quantum dots (QDs) multilayer films (2-QDMF). The functional multilayer films were assembled by layer-by-layer (LBL) deposition of oppositely charged CdTe QDs and poly(dimethyldiallylemmonium chloride) (PDDA). Then the outermost layer of 2-QDMF was cross-linked to bovine serum albumin (BSA), polyethylene glycol (PEG) or glutathione (GSH). It was found that when BSA modified quartz slides were immersed into solutions containing Hg²⁺ and Cu²⁺ respectively, the 2-QDMF can be quenched by Hg²⁺, but not by Cu²⁺. Under the optimization conditions, the quenched photoluminescence (PL) intensities of multilayer films were almost linearly proportional to the concentration of Hg²⁺ in the range of 1.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol L⁻¹ and the detection limit was 4.5 × 10⁻⁹ mol L⁻¹. The proposed method is intuitional and convenient, which can be applied to the determination of trace Hg²⁺ in the artificial water sample with satisfactory results.     

Fluorescence detection of mercury(II) and lead(II) ions using aptamer/reporter conjugates

We have developed a fluorescence technique for the detection of Hg²⁺ and Pb²⁺ ions using polythymine (T₃₃)/benzothiazolium-4-quinolinium dimer derivative (TOTO-3) and polyguanine (G₃₃)/terbium ions (Tb³⁺) conjugates, respectively. Hg²⁺ ions induce T₃₃ to form folded structures, leading to increased fluorescence of the T₃₃/TOTO-3 conjugates. Because Pb²⁺ ions compete with Tb³⁺ ions to form complexes with G₃₃, the extent of formation of the G₃₃-Tb³⁺ complexes decreases upon increasing the Pb²⁺ concentration, leading to decreased fluorescence at 545 nm when excited at 290 nm. To minimize interference from Hg²⁺ ions during the detection of Pb²⁺ ions, we conducted two-step fluorescence measurements; prior to addition of the G₃₃/Tb³⁺ probe, we recorded the fluorescence of a mixture of the T₃₃/TOTO-3 conjugates and Hg²⁺ ions. The fluorescence signal obtained was linear with respect to the Hg²⁺ concentration over the range 25.0-500 nM (R² = 0.99); for Pb²⁺ ions, it was linear over the range 3.0-50 nM (R² = 0.98). The limits of detection (at a signal-to-noise ratio of 3) for Hg²⁺ and Pb²⁺ ions were 10.0 and 1.0 nM, respectively. Relative to other techniques for the detection of Hg²⁺ and Pb²⁺ ions in soil and water samples, our present approach is simpler, faster, and more cost-effective.     

A highly selective pyrene based fluorescent sensor toward Hg detection

A new pyrene-containing fluorescent sensor has been synthesized from 2,3,3-trimethylindolenine. Spectroscopic and photophysical properties of sensor are presented. The large change in fluorescence intensity (I/I₀ = 0.13) at 381 nm and affinity to Hg²⁺ over other cations such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cu²⁺ make this compound a useful chemosensor for Hg²⁺ detection in hydrophilic media. The sensor (6.0 × 10⁻⁶ M) displays significant fluorescence quenching upon addition of Hg²⁺ in pH 7.4 HEPES buffer without excimer formation. Job’s plot analysis shows the binding stoichiometry to be 2:1 (host/guest).     

Identification of charge transfer (CT) transition in (Gd,Y)BO3:Eu phosphor under 100-300 nm

A broad excitation band in an excitation spectrum of (Gd,Y)BO₃:Eu was observed in the VUV region. It could be considered that this band was composed of two bands at about 160 and 166 nm. The preceding band was assigned to the BO₃ group absorption. The later one at about 166 nm could be assigned to the charge transfer (CT) transition of Gd³⁺-O²⁻. Such an assignment was deduced from the result that broadbands at around 170 nm for GdAlO₃:Eu, and at 183 nm for Gd₂SiO₅:Eu are due to the CT transition of Gd³⁺-O²⁻; this was also identified by CaZr (BO₃)₂:Eu. Since there are no Gd³⁺ ions in it; a weak band in the VUV region in the excitation spectrum of Ca_0.95ZrEu_0.05(BO₃)₂ was observed. The excitation spectra were overlapped between the CT transition of Gd³⁺-O²⁻ and BO₃ group absorption, and it caused the emission of Eu³⁺ effectively in the trivalent europium-doped (Gd,Y)BO₃ host lattice under 147 nm excitation. Intense broad excitation bands were observed at about 155 nm for YBO₃:Eu and at about 153 nm for YAlO₃:Eu; it could be attributed to the CT transition between Y³⁺ and O²⁻. As a result, under the xenon discharge (147 nm) excitation, the intense emission of Eu³⁺ in GdBO₃ was found to be more convenient just because of the partial substitution of Y³⁺ for Gd³⁺.