Organomineral sorbents based on clinoptilolite-containing tuffs

The anion-exchange properties of a new organomineral sorbent obtained by modification of clinoptilolite-containing tuffs by polyhexamethyleneguanidine have been studied after different periods of storage (time after synthesis) and numbers of sorption-regeneration cycles. The sorbent can be used as a cation- and an anion-exchanger simultaneously. Selectivity coefficients (exchange constants) for F^–, SO₄ ^2–, and HPO₄ ^2– ionsvs. Cl^– ions on modified clinoptilolite-containing tuffs have been determined. The modification improves the mechanical properties of clinoptilolite tuffs.For part 1, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1554–1556, September, 1994.     

Reactions of excited fullerenes C60 and C70 studied by mass spectrometry

The transformation of the mass spectra of the laser-desorbed C₆₀ and C₇₀ samples with a successive increase in the laser power, resulting in an increase in the degree of excitation of C₆₀ (C₇₀) and in the number of the particles in the laser plume, was studied. Unusual metastable clusters (C₆₀ + C₂) and (C₇₀ + C₂) are formed even at a minimum laser power and begin to dissociate after 0.5 s following a short (3 ns) laser pulse. An increase in the laser power results in the appearance of peaks of metastable clusters C₆₂ (C₇₂) with the statistically normal lifetime without a delay of dissociation. A further increase in the laser power produces metastable clusters C_60k–2n and C_70k–2n (k = 2, 3) formed without a lag from the dimers and trimers of C₆₀ (C₇₀) by the ejection of a number of C₂ required for the stabilization of the C₂ molecules. The peak of C₇₀ appears simultaneously with the appearance of the (C₆₀)_2–2n peaks upon the laser desorption of pure C₆₀. These findings provide evidence for the growth of the excited fullerene clusters by coalescence and subsequent stabilization due to the ejection of a small fragment rather than by the implantation of C₂ into the fullerene framework. This mechanism of cluster growth should be taken into consideration in modeling fullerene formation in an electric arc reactor, because the clusters formed under these conditions have a substantial excess internal energy.     

Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.     

Synthesis and sorption properties of new hybrid chelating sorbents with β-alanine functional groups

A series of -aminopropylsilylated sorbents was obtained from different oxide supports (silica gels, silica fillers, macroporous glasses, alumina) and by the direct synthesis (hydrolytic polycondensation of tetraalkoxysilanes with -aminopropyltriethoxysilane). The highest degree of immobilization was achieved for silicas, while the most convenient solvent was methanol. Sorbents with -alanine functional groups were obtained by the subsequent reaction with acrylic acid. The degree of -carboxyethylation was 1.3–1.9, and the highest content of functional groups (v_COOH = 3.23 mmol g^–1) was achieved for carboxyethylated xero gel synthesized by the copolycondensation of tetraethoxysilane with -aminopropyltriethoxysilane. The sorbents containing -alanine possess a higher selectivity of Cu²⁺ ion sorption than the initial -aminopropylsilylated sorbents.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2620–2625, December, 2004.     

Acid association quotients of bis-tris in aqueous sodium chloride media to 125°C

The ionic strength and temperature dependencies of the molal acid association quotients of 2,2-Bis(hydroxymethyl)-2,2,2-nitrilotriethanol (also abbreviated as bis-tris) were determined potentiometrically in a concentration cell fitted with hydrogen electrodes. The emf was recorded for equimolal bis-tris/bis- trisHCl buffer solutions from 5 to 125°C at approximately 25°C intervals, and at nine ionic strengths from 0.05 to 5.0m (NaCl). The molal association quotients, combined with infinite dilution values from the literature, are described precisely by a seven parameter equation which yielded the following thermodynamic quantities at infinite dilution and 25°C: logK=6.481±0.003, H ^o =–28.5±0.2 kJ-mol ^–1 , S ^o =28.5±0.8 J-K ^–1 -mol ^–1 , and C _P ^o =–22±5 J-K ^–1 -mol ^–1 . The equation incorporates a simple three term expression for logK, but requires four terms to describe the rather complex ionic strength dependence despite the reaction being isocoulombic. The molal association quotients from this study and the literature were also subjected to the Pitzer ion interaction treatment.     

Ab initio Study of β-lactam antibiotics

Ab initio SCF-MO-LCAO calculations have been performed with a 7s3p/3s GTO basis set for the CH₃O--lactam + OH^– reaction which is related to the mode of action of -lactam antibiotics. The comparison of the present results with the previous ones for -lactam + OH^– and 3-cephem + OH^– shows that the CH₃O substitution has a negligible effect on the amidic bond breaking of -lactam, so that this group probably influences other steps of the antibiotic reactivity of cephaloporins.     

Charge-transfer complexes betweenp-toluidine and iodine in solution: A kinetic study

The kinetics of charge-transfer interaction betweenp-toluidine and iodine in methylene chloride was investigated in depth. Thethermal process of formation of theinner complex was found to proceed to an equilibrium. Thephotochemical process follows a different reaction coordinate, going through the formation of an exciplex between the excitedouter complex and the amine ground state. In both cases the same ionic complex (Am ₂I⁺I ₃ ^– , whereAm stands forp-toluidine) was detected as the final product.

---

Kinetische Untersuchung der Charge-Transfer-Komplexe zwischenp-Toluidin und Jod

Zusammenfassung Die Kinetik der Charge-Transfer-Wechselwirkung zwischenp-Toluidin und Jod in Methylenchlorid wurde ausführlich untersucht. Derthermische Prozeß, der zur Bildung desinner-Komplexes führt, geht bis zu einem Gleichgewicht. Derphotochemische Prozeß folgt einer unterschiedlichen Reaktionskoordinate und verläuft über die Bildung eines Exziplexes zwischen dem angeregtenouter-Komplex und dem Amin im Grundzustand. In beiden Fällen wurde derselbe ionische Komplex (Am ₂I⁺I ₃ ^– , wobeiAm fürp-Toluidin steht) als Endprodukt festgestellt.

     

Naphthalene Complexation by β-Cyclodextrin: Influence of Added Short Chain Branched and Linear Alcohols

Naphthalene forms 1 : 1 complexes with -cyclodextrin (-CD)in water. The binding constant is 377 ± 35 M^-1. Addition of linear or branched alcohols causes a reduction in the apparent strength of naphthalene binding (K_app) compared to the value in the absence of additives. For example, 1% 1-pentanol reduces K_app to 184 ± 31 M^-1. Branching does not alter K_app much for a given number of carbon atoms, e.g., it is 113 ± 9 M^-1for 2-pentanol and 116 ± 8 M^-1for 3-pentanol. The exception to this is tert-butanol for which K_app is 577 ± 40 M^-1. The variation in K_app as a function of [1-pentanol] yields values for the individual equilibrium constants contributing to K_app. This reveals that a ternary complex forms involving naphthalene, the CD and 1-pentanol. The constant for formation of the ternary complex is 99 ± 29 M^-2. NaI quenching of naphthalene fluorescence indicates that the CD cavity partially protects the naphthalene excited state fromthis water phase quencher. Interestingly, the Stern–Volmer constant is lower in the presence of 1-pentanol than in its absence, although there should be more unbound (and therefore more NaI accessible) naphthalene in the former system than in the latter. These apparently contradictory results are discussed in terms of ternary complex formation.     

Theory of isomer shift in hemin

Using the self-consistent charge extended Hückel procedure, the charge density difference at Fe⁵⁷ nucleus, between hemin and Fe⁺³ ion is calculated. This is combined with the recent value of the calibration constant, –0.23±0.02a ₀ ³ mm/sec to obtain an isomer shift of –0.374 mm/sec between hemin and Fe⁺³ in good agreement with the value –0.392 mm/sec derived from experimental data and the calculated value of the isomer shift of Fe⁺³ with respect to K₃FeF₆ from first principle covalency investigations in the latter compound. is composed of contributions from core and valence electrons of the same order of magnitude, with the latter being more than one-half of the former. The core contribution is composed of a number of terms of comparable magnitude and differing signs, whose significance is discussed.Supported by grant HL 15196-02 from the Heart and Lung Institute of National Institute of Health.     

Kinetics and mechanism of the hydrolysis of sodium carboxymethylcellulose (Na-CMC) by a cellulase complex

TheSomogyi-Nelson colorimetric method is applied in a new manner more suitable for evaluating the kinetics of the enzyme hydrolysis of sodium carboxymethylcellulose (Na-CMC) catalyzed by the cellulase complex. By means of selective inhibition of a chosen enzyme from the cellulase complex it became possible to trace the effect of the other enzymes included in its composition.

---

Kinetik und Mechanismus der Hydrolyse von Natriumcarboxymethylcellulose (Na-CMC) durch einen Cellulase-Komplex

Zusammenfassung Die kolorimetrische Methode nachSomogyi undNelson wird nach einem neuen Verfahren zur Verfolgung der Kinetik der hydrolytischen Spaltung von Natriumcarboxymethylcellulose (Na-CMC), katalysiert durch den Cellulase-Komplex, angewandt. Durch selektive Inhibierung eines bestimmten Enzyms des Cellulase-Komplexes kann man die Wirkung der anderen zu seiner gesamten Zusammensetzung gehörenden Enzyme verfolgen.

---

Symbols Used E enzyme (E—cellulase;E—exo-cellobiohydrolase;E—-glucosidase) - [E] _w weight concentration of enzymeE - S substrate (Na-CMC—sodium carboxymethylcellulose) - [S]₀ weight concentration of substrateS - I inhibitor (I—lactose;I—calcium chloride;I—condurrite-B-epoxide) - P product (P—oligosaccharides;P—cellobiose;P—D-glucose) - P end product (K , K , K ) - DP degree of polymerization - DS degree of substitution - ES enzyme-substrate complex (E S, E S, E S) - EP enzyme-product complex (E P, E P) - EI enzyme-inhibitor complex (E I, E I, E I) - M _s molecular mass of substrateS - K _s substrate constant (K _s , K _s , K _s ) - K _I inhibitor constant (K _I , K _I , K _I ) - K _m Michaelis-Menten constant - k ₊₁,k ₊₂ (k ₊₂ ,k ₊₂ ,k ₊₂ ) forward rate constants - k _–1 reverse rate constant - ₀ initial rate of reaction - V maximal reaction rate - A change in absorbance - molar absorption coefficient - wavelength Herrn Prof. Dr.Hans Tuppy zum 60. Geburtstag herzlichst gewidmet.     

peri-Naphthylenediamines. 37. Synthesis of N,N"-diisopropyl-N,N"-dimethyl-1,8-diaminonaphthalene

Alkylation of N,N"-dimethyl-1,8-diaminonaphthalene with 2-iodopropane in a KOH—DMSO system afforded a new proton sponge, viz., N,N"-diisopropyl-N,N"-dimethyl-1,8-diaminonaphthalene; the rotation barrier of the Prⁱ groups about the N—C bond is 68.4±0.4 kJ mol^–1 (DMSO).     

Synthesis and thermal decomposition of 3-aroyl-4-aryl-2-pyrazolines

Summary 3-Aroyl-4-aryl-2-pyrazolines (21–40) have been synthesized by the reaction of ,-unsaturated ketones (1–20) with diazomethane. These 2-pyrazolines gave -methyl-,-unsaturated ketones (41–46) on thermal denitrogenation.Dedicated to Prof. Dr.F. Sauter on the occasion of his 65^th birthday     

Photochemical addition of diethyl ether to β,β,β',β'-tetrakis(trifluoromethyl)divinyl ether

The 1:1 adducts of diethyl and ,,','-tetrakis(trifluoromethyl)divinyl ether (1),i.e., 3,5-(ee)-bis[2,2,2-trifluoro-1-(trifluoromethyl)ethyl]-2,6-dimethyl-1,4-dioxane (2) (3 isomers) and 4-ethoxy-1,1,1-trifluoro-2-trifluoromethyl-3-[3,3,3-trifluoro-2(trifluoromethyl)propenyloxy]pentane (3), have been obtained by UV-irradiation of a solution of divinyl ether1 in diethyl ether. The X-ray structural investigation of the all-(e)-isomer of dioxane (2) has been carried out.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 85–88, January, 1994.     

Ab initio Calculation of the charge distribution and the ligand field splitting in the tetrahedral halo complexes CuCl 4 2− 4 and NiCl 4 2−

The charge distribution and the ligand field splitting in the tetrachloro complexes CuCl ₄ ^2– and NiCl ₄ ^2– have been investigated by means of the restricted Hartree-Fock method. A rather large basis set of contracted Gaussian type orbitals has been employed. The charge distributions have been analysed by means of Mulliken population analyses. The ligand field splitting 10Dq has been compared with literature results known for the octahedral cluster NiF ₆ ^4– occurring in KNiF₃. A detailed analysis has been carried out for CuCl ₄ ^2– . From calculations on a selected number of states of NiCl ₄ ^2– the Racah parameters B and C have been obtained.     

Application of solvent extraction and synchronous spectrofluorimetry to the determination of the formation constant for a 1:1 complex of carbazole withβ-cyclodextrin in water-dimethyl sulfoxide medium

Extraction of carbazole in heptane was performed at 25±1°C with an aqueous dimethyl sulfoxide (DMSO) medium containing -cyclodextrin (CD) at consecutive concentrations in the range of 0–10 mM. The fluorescence intensity of carbazole remaining in the heptane phase was measured by synchronous scanning fluorimetry. The apparent formation constant (K _f) for a 1:1 carbazole: CD inclusion complex in water-DMSO medium was determined by using a linear plot of the distribution ratio calculated from the fluorescence intensities vs. the -CD concentration. The values thus obtained ranged from 477 M^–1 in a 10% v/v DMSO medium to 12.1 M^–1 in a 60% v/v medium. Good linear relationships were observed between logK _f and the DMSO concentration ([DMSO]), and also between logK _f and the logarithm of the distribution coefficient (K _d) for carbazole. The formation constant in 100% water was estimated to be approximately 1.0×10³ M^–1 on the basis of the logK _f vs. [DMSO] and the logK _f vs. logK _d correlations.     

Determination of the stoichiometry and stability constants of theβ-cyclodextrin-dextromethorphan inclusion complexes by liquid chromatography and UV spectroscopy

The inclosion of dextromethorphan (DMN) by -cyclodextrin (-CD) was studied by using chromatography, UV spectroscopy and circular dichroism methods at 25 °C, pH 7.4 and 4.2. It was found that the CD : DMN complex has 1 : 1 stoichiometry. It is more stable at pH 7.4 than at pH 4.2. with constants respectively equal to 8000 ± 800 M^–1 and 5750 ± 500 M^–i, as determined by chromatography. The stability of the complex at pH 7.4 decreases as the temperature increases. From the van 't Hoff dependence the standard entropy and enthalpy changes were determined at this pH.     

Crystal structure of copper(II) bis-hexafluoroacetylacetonate

An X-ray diffraction investigation has performed for copper(II) bis-hexafluoroacetylacetonate (Bruker AXS P4 automatic diffractometer, MoK radiation, t = –25°C). Crystal data for C₁₀H₂CuF₁₂O₄: a = 5.530(1) Å, b = 6.038(1) Å, c = 11.266(2) Å, = 95.948(3)°, = 101.743(3)°, = 92.298(3)°, space group; P1, V = 365.6(1) ų, Z = 1, d _calc = 2.169 g/cm³. The square-planar environment of the copper atom (Cu-O_av 1.912 Å, O-Cu-O_av 93°) is completed to bipyramidal by two fluorine atoms of the neighboring molecules, Cu...F 2.71 Å and 2.75 Å.Original Russian Text Copyright © 2004 by S. A. Gromilov, I. A. Baidina, P. A. Stabnikov, and G. V. RomanenkoTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 502–507, May–June 2004.     

Determination of the equilibrium melting point of the β-form of polypropylene

The melting behavior of the -form of isotactic polypropylene (-iPP) was investigated as a function of crystallization time and temperature. Calcium suberate, a selective -nucleating agent was used to produce samples that consist entirely of -form i-PP. The experimental melting points were recorded at different crystallization times and were extrapolated to the start of the crystallization process in order to eliminate the effect of lamellar thickening. Using the non-linear Hoffman—Weeks approach to correlate these extrapolated experimental melting temperatures with the corresponding crystallization temperatures, an equilibrium melting point of 209°C was obtained for -iPP. The equilibrium melting point estimated through the non-linear Hoffman—Weeks analysis is about 30°C higher than that (T _m ⁰=177°C) obtained on the basis of the linear extrapolation. These results are consistent with earlier claims that a linear extrapolation of T _m–T _c data leads to an underestimation of the equilibrium melting point. The results obtained for -iPP exemplify the importance of accounting for both the isothermal lamellar thickening effects and the non-linearity in the T _m–T _c correlation, when the determination of an equilibrium melting point is carried out using a procedure based on the predictions of the Lauritzen—Hoffman secondary nucleation theory.This revised version was published online in November 2005 with corrections to the Cover Date.     

Crystal and Molecular Structure of Cu(II) Bis-(2-methoxy-2,6-dimethyl-3-imino-5-heptanonate)

A new compound from the series of alkoxyketoiminates, Cu(II) bis-(2-methoxy-2,6-dimethyl-3-imino-5-heptanonate), has been synthesized and studied by X-ray crystallography. Crystal data for CuO₄N₂C₂₀H₃₆: a=10.154(1), b=9.921(1), c=11.684(2) , =96.17(1)°, space group P2₁/c, Z=2, dcalc =1.226 g/cm³, R=0.037. The structure is molecular and built from isolated trans-complexes. The copper atom has a plane square environment of two oxygen atoms (Cu–O 1.93 ) and two nitrogen atoms (Cu–N 1.90 ). The O–Cu–N chelate angle is 91.7°. The complex has an intramolecular hydrogen bond, N–H...O 2.16 , involving the alkoxy oxygen atom. The molecular packing in the crystal is close to that of copper(II) dipivaloylmethanate. The calculated van der Waals intermolecular interaction energies and thermogravimetric characteristics of the complexes are compared.     

Stable σ-adducts of 4,6-dinitrotetrazolo[1,5-a]pyridine with alkoxide anions

The reaction of 2-chloro-3,5-dinitropyridine with two equivalents of KN₃ in the presence of ROH results in stable Meisenheimer-type -adducts of 4,6-dinitrotetra-zolo[1,5-a]pyridine with RO^– anions (R = H, Alk, Ph). The mechanism of -complex formation was suggested. The structure of the -adduct with R = Me was established by IR and NMR spectroscopy and by X-ray diffraction analysis.For the preliminary communication, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1278–1283, July, 1994.This work was supported by the Russian Foundation for Basic Research (project code 93-03-5329).