Thermochemical study of 5-methyluracil, 6-methyluracil, and 5-nitrouracil

The standard (p° = 0.1 MPa) molar enthalpies of formation, in the crystalline phase, at T = 298.15 K, for 5-methyluracil, 6-methyluracil, and 5-nitrouracil were derived from the values of the standard massic energies of combustion measured by static bomb combustion calorimetry. The results obtained together with literature values of the enthalpies of sublimation yielded the standard molar enthalpies of formation, in gaseous phase, at T = 298.15 K. These values are discussed in the terms of structural enthalpic increments.     

Thermochemical properties of three piperidine derivatives

The standard (p ^o=0.1 MPa) molar energies of combustion for the crystalline 1-benzyl-4-piperidinol and 4-piperidine-piperidine, and for the liquid 4-benzylpiperidine, were measured by static bomb calorimetry, in oxygen, at T=298.15 K. The standard molar enthalpies of sublimation or vaporization, at T=298.15 K, of these three compounds were determined by Calvet microcalorimetry. Those values were used to derive the standard molar enthalpies of formation, at T=298.15 K, in their condensed and gaseous phase, respectively.     

Experimental thermochemical study of two 2-alkylbenzimidazole isomers (alkyl=propyl and isopropyl)

This paper reports the values of the standard (p^∘=0.1 MPa) molar enthalpy of formation in the condensed, at T=298.15 K, for 2-R-benzimidazoles (R=propyl, isopropyl), derived from, the respective enthalpies of combustion in oxygen, measured by static bomb combustion calorimetry and the standard molar enthalpies of sublimation, at T=298.15 K, obtained using Calvet microcalorimetry in the case of 2-isopropylbenzimidazole and, by the variation of vapour pressures, determined by the Knudsen effusion technique, with temperatures between (344 and 365) K for 2-propylbenzimidazole. Heat capacities, in the temperature ranges from T=268 K to near their respective melting temperatures, T=421 K for 2-propylbenzimidazole and T=464 K for 2-isopropylbenzimidazole, were measured with a differential scanning calorimeter. These values were used to derive the standard molar enthalpies of formation, of the two 2-benzimidazole derivatives, in gaseous phase.     

Energetic studies of two oxygen heterocyclic compounds Xanthone and tetrahydro-γ-pyrone

The present work reports an experimental thermochemical study supported by state of the art calculations of two heterocyclic compounds containing oxygen in the ring: xanthone and tetrahydro-γ-pyrone. The standard (po = 0.1 MPa) molar enthalpies of formation in the condensed phase, at T = 298.15 K, were derived from the measurements of the standard molar energies of combustion in oxygen atmosphere, using a static bomb calorimeter. The standard molar enthalpies of sublimation or vaporization, at T = 298.15 K, of the title compounds were obtained from Calvet microcalorimetry measurements. These values were used to derive the standard enthalpies of formation of the compounds in the gas-phase at the same temperature, which were compared with estimated data from G3(MP2)//B3LYP computations.     

Standard molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids

The standard (p = 0.1 MPa) molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids were derived from their standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of 2- and 3-cyanobenzoic acids. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the condensed phase and standard molar enthalpies for phase transition. The results obtained are −(150.7 ± 2.0) kJ · mol⁻¹, −(153.6 ± 1.7) kJ · mol⁻¹ and −(157.1 ± 1.4) kJ · mol⁻¹ for 2-cyano, 3-cyano and 4-cyanobenzoic acids, respectively. Standard molar enthalpies of formation were also estimated by employing two different methodologies: one based on the Cox scheme and the other one based on several different computational approaches. The calculated values show a good agreement with the experimental values obtained in this work.     

Combined experimental and computational thermochemistry of isomers of chloronitroanilines

The standard (p^° = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, of 4-chloro-3-nitroaniline and 5-chloro-2-nitroaniline, in the condensed phase, were derived from their standard molar energies of combustion, in oxygen, to yield CO₂(g), N₂(g), and HCl · 600H₂O(l), measured by rotating bomb combustion calorimetry. From the temperature dependence of the vapour pressures of these compounds, measured by the Knudsen effusion technique, their standard molar enthalpies of sublimation, at T = 298.15 K, were derived by means of the Clausius–Clapeyron equation. The Calvet microcalorimetry was also used to measure the standard molar enthalpies of sublimation of these compounds, at T = 298.15 K. The combination of the standard molar enthalpies of formation in the condensed phases and the standard molar enthalpies of sublimation yielded the standard molar enthalpies of formation in the gaseous phase at T = 298.15 K for each isomer. Further, the standard (p^° = 0.1 MPa) molar enthalpies, entropies and Gibbs free energies of sublimation, at T = 298.15 K, were also derived.The standard molar enthalpies of formation, in the gaseous phase of all the chloronitroaniline isomers were also estimated by the Cox scheme and by the use of computational thermochemistry and compared with the available experimental values.     

Thermochemical Study of the Cyanophenol Isomers

The standard (p° = 0.1MPa) molar enthalpies of formation for 2-, 3- and 4-cyanophenol in the gaseous phase were derived from the standard molar enthalpies of combustion in oxygen at T = 298.15 K, measured by static bomb combustion calorimetry, and the standard molar enthalpies of sublimation at 298.15 K, measured by Calvet microcalorimetry: 2-cyanophenol, (32.8 ± 2.1) kJ-mol^–1; 3-cyanophenol, (37.8 ± 2.2) kJ-mol^–1; 4-cyanophenol, (35.1 ± 2.5)-kJ-mol^–1. Ab initio geometry optimizations of the three cyanophenols and respective phenoxyl radicals and phenoxide anions were performed using the 6-31G* basis sets. Single-point MP2 and DFT energy calculations allowed the estimation of the enthalpies of formation in the gaseous phase, the O—H bond dissociation energies, and the gas-phase acidities of the three cyanophenols. The theoretical results are generally in good agreement with the experimental findings.     

Energetics of some sulphur heterocycles

The present work is part of a broader research program on the energetics of formation of heterocycles, aiming the study of the enthalpic effects of the introduction of different substituents into heterocycles. In this work we present the results of the thermochemical research on sulphur heterocycles of the type substituted thiophenes with different kind of substituents, mainly alkyl, ester, acetyl, carboxamide, acetamide, carbonitrile and carboxaldehyde. The standard (p ^o=0.1 MPa) molar enthalpies of formation, in the condensed phase, at T=298.15 K, of a large number of substituted thiophenes, were derived from their standard massic energies of combustion, measured by rotating-bomb combustion calorimetry, while the standard molar enthalpies of vaporization or sublimation of those compounds were obtained either by high temperature Calvet Microcalorimetry, or by the temperature dependence of their vapour pressures determined by the Knudsen effusion technique. The standard molar enthalpies of formation, of the studied sulphur heterocycles in the gaseous phase, were then derived. The results are interpreted in terms of structural contributions to the energetics of the substituted thiophenes, the internal consistency of the results is discussed and, whenever appropriate and possible, empirical correlations are suggested for the estimation of standard molar enthalpies of formation, at T=298.15 K, of substituted thiophenes. A Table of enthalpic increments for different group substituents in positions 2 or 3 of the thiophene ring has been established.     

Calorimetric and computational thermochemical study of 3,3-tetramethyleneglutaric acid, 3,3-tetramethyleneglutaric anhydride, and 3,3-tetramethyleneglutarimide

The standard (p(o) = 0.1 MPa) molar energies of combustion in oxygen, at T = 298.15 K, of solid 3,3-tetramethyleneglutaric acid and the related 3,3-tetramethyleneglutaric anhydride and 3,3-tetramethyleneglutarimide were measured by static bomb combustion calorimetry. The values of the standard molar enthalpies of sublimation, at T = 298.15 K, were obtained by Calvet microcalorimetry, allowing the calculation of the standard molar enthalpies of formation of the compounds, in the gaseous state, at T = 298.15 K. The geometries of the experimentally studied compounds were fully optimized using density functional theory with the B3LYP functional and extended basis sets. More accurate energies were also obtained from single-point calculations at the most stable B3LYP/6-311G** geometries, using the cc-pVTZ basis set. From these calculations the standard molar enthalpies of formation of 3,3-tetramethyleneglutaric acid, 3,3-tetramethyleneglutaric anhydride, and 3,3-tetramethyleneglutarimide were estimated using isodesmic reactions involving glutaric acid, glutaric anhydride, and glutarimide, respectively. Experimental and computational results were used in the discussion of the interrelation of energetics and structure in these compounds and compared with other structurally related compounds.     

Experimental and computational thermochemistry of 1-phenylpyrrole and 1-(4-methylphenyl)pyrrole

The standard (p° = 0.1 MPa) molar enthalpies of formation, in the crystalline phase, of 1-phenylpyrrole and 1-(4-methylphenyl)pyrrole, at T = 298.15 K, were derived from the standard molar energies of combustion in oxygen, measured by static-bomb combustion calorimetry. For these compounds, the standard molar enthalpies of sublimation, at T = 298.15 K, were determined from the temperature–vapour pressure dependence, obtained by the Knudsen mass-loss effusion method. Using estimated values for the heat capacity differences between the gas and the crystal phases of the studied compounds, the standard (p° = 0.1 MPa) molar enthalpies, entropies, and Gibbs energies of sublimation, at T = 298.15 K, were derived. From the experimental values, the standard molar enthalpies of formation, in the gaseous phase, at T = 298.15 K, were calculated.Additionally, the enthalpies of formation of both compounds were estimated using the composite G3(MP2)//B3LYP approach together with adequate gas-phase working reactions. There is a very good agreement between computational and experimental results.     

A calorimetric and computational study of the thermochemistry of halogenated 1-phenylpyrrole derivatives

The standard molar enthalpies of formation, in the crystalline phase, of three halogenated 1-phenylpyrrole derivatives, namely 1-(4-fluorophenyl)pyrrole, 1-(4-chlorophenyl)pyrrole, and 1-(4-iodophenyl)pyrrole were derived from the respective enthalpies of combustion, measured by rotating-bomb combustion calorimetry. Their enthalpies of sublimation, at T = 298.15 K, were obtained from the Knudsen mass-loss effusion technique. From these two experimental parameters, the standard molar enthalpies of formation, in the gaseous phase, at T = 298.15 K, of 1-(4-fluorophenyl)pyrrole, 1-(4-chlorophenyl)pyrrole, and 1-(4-iodophenyl)pyrrole were calculated, respectively, as (26.2 ± 2.4) kJ · mol⁻¹, (196.2 ± 2.5) kJ · mol⁻¹, and (311.5 ± 2.4) kJ · mol⁻¹.The gas-phase enthalpies of formation of both fluorine and chlorine compounds were estimated by G3(MP2)//B3LYP computations. For the iodine compound, the B3LYP/6-311G(d):ECP46MDF approach was employed. Additionally, the DFT calculations were extended to estimate the enthalpy of formation of the bromine derivative, 1-(4-bromophenyl)pyrrole, performed at the B3LYP/6-311G(d) level of theory.     

Experimental and computational thermochemistry of 1,4-benzodioxan and its 6-R derivatives

The derivatives of 1,4-benzodioxan are found widely spread in nature and have great biomedical importance. The present work reports an experimental and computational study on the thermochemistry of 1,4-benzodioxan and several of its 6-R derivatives in the gaseous phase, at T = 298.15 K. Our current results were obtained from measurements of combustion energies, at T = 298.15 K, using a static bomb calorimeter. The standard molar enthalpies of vaporization/sublimation were measured by Calvet microcalorimetry and corrected to T = 298.15 K. Additionally, estimates were performed of the enthalpies of formation of all the studied compounds in the gas phase, using DFT and other more accurate correlated calculations, together with appropriate isodesmic or homodesmic reactions. There is a reasonable agreement between computational and experimental results.     

Molecular energetics of alkyl substituted pyridine <Emphasis Type="Italic">N</Emphasis>-oxides

The standard (p° = 0.1 MPa) energies of combustion in oxygen, at T = 298.15 K, for the solid compounds 2-methylpyridine-N-oxide (2-MePyNO), 3-methylpyridine-N-oxide (3-MePyNO) and 3,5-dimethylpyridine-N-oxide (3,5-DMePyNO) were measured by static-bomb calorimetry, from which the respective standard molar enthalpies of formation in the condensed phase were derived. The standard molar enthalpies of sublimation, at the same temperature, were measured by Calvet microcalorimetry. From the standard molar enthalpy of formation in gaseous phase, the molar dissociation enthalpies of the N–O bonds were derived, and compared with values of the dissociation enthalpies of other N–O bonds available for other pyridine-N-oxide derivatives.     

Thermochemical and theoretical study of some methyldiazines

The standard (p ⁰ = 0.1 MPa) molar enthalpies of formation for the liquid 2,3-dimethylpyrazine and trimethylpyrazine and the crystalline 2,3-dimethylquinoxaline and tetramethylpyrazine were derived from the standard molar enthalpies of combustion, in oxygen, atT=298.15 K, measured by static-bomb combustion calorimetry. The standard molar enthalpies of vaporization or of sublimation for the same compounds were determined by Calvet microcalorimetry. Ab initio full geometry optimization at the 3-21G and 6-31G^* levels were also performed for all the methylpyrazine isomers. MP2/RHF/3-21G//3-21G and DFT energies were also calculated for all the methylpyrazine isomers, thus allowing us to estimate their isodesmic resonance energies.     

Comparative computational and experimental study on the thermochemistry of the chloropyrimidines

The standard (p0 = 0.1 MPa) molar enthalpies of formation, Delta fH(0)(M), for liquid 2,4,6-trichloropyrimidine and for crystalline 2-chloropyrimidine, 2,4- and 4,6-dichloropyrimidine, and 2,4,5,6-tetrachloropyrimidine compounds were determined at T = 298.15 K by rotating-bomb combustion calorimetry. The standard molar enthalpies of vaporization or sublimation, Delta (g)(cr,l) H(0)(M), of these compounds at T = 298.15 K were determined by Calvet microcalorimetry. The experimental standard molar enthalpies of formation of those compounds, in the gaseous state, at T = 298.15 K, were thus obtained by combining these two sets of results. The latter values have been employed in the calibration of the computational procedure, which has been used to estimate the gas-phase enthalpies of formation for the other chloropyrimidines that were not possible to obtain in a pure form for the experimental study. It is found that the exchange-correlation functional based on the local spin density approximation (LSDA) seems to be a cheap choice for the estimation of enthalpies of formation for heterocycles containing nitrogen atoms; the well-known B3LYP hybrid method yields larger differences, with respect to the experimental values, for 2,4,6-tri- and 2,4,5,6-tetrachloropyrimidines.     

Thermodynamic properties of the methyl esters of p-hydroxy and p-methoxy benzoic acids

The vapor pressures of crystalline and liquid phases of methyl p-hydroxybenzoate and of methyl p-methoxybenzoate were measured over the temperature ranges (338.9 to 423.7) K and (292.0 to 355.7) K respectively, using a static method based on diaphragm capacitance gauges. The vapor pressures of the crystalline phase of the former compound were also measured in the temperature range (323.1 to 345.2) K using a Knudsen mass-loss effusion technique. The results enabled the determination of the standard molar enthalpies, entropies and Gibbs free energies of sublimation and of vaporization, at T = 298.15 K, as well as phase diagram representations of the (p, T) experimental data, including the triple point. The temperatures and molar enthalpies of fusion of both compounds were determined using differential scanning calorimetry and were compared with the results indirectly derived from the vapor pressure measurements. The standard (p° = 10⁵ Pa) molar enthalpies of formation, in the crystalline phase, at T = 298.15 K, of the compounds studied were derived from their standard massic energies of combustion measured by static-bomb combustion calorimetry. From the experimental results, the standard molar enthalpies of formation, in the gaseous phase at T = 298.15 K, were calculated and compared with the values estimated by employing quantum chemical computational calculations. A good agreement between experimental and theoretical results is observed. To analyze the thermodynamic stability of the two compounds studied, the standard Gibbs free energies of formation in crystalline and gaseous phases were undertaken. The standard molar enthalpies of formation of the title compounds were also estimated from two different computational approaches using density functional theory-based B3LYP and the multilevel G3 methodologies.     

Additivity methods for prediction of thermochemical properties. The Laidler method revisited. 2. Hydrocarbons including substituted cyclic compounds

A revised parameterization of the extended Laidler method for predicting standard molar enthalpies of atomization and standard molar enthalpies of formation at T = 298.15 K for several families of hydrocarbons (alkanes, alkenes, alkynes, polyenes, poly-ynes, cycloalkanes, substituted cycloalkanes, cycloalkenes, substituted cycloalkenes, benzene derivatives, and bi and polyphenyls) is presented. Data for a total of 265 gas-phase and 242 liquid-phase compounds were used for the calculation of the parameters. Comparison of the experimental values with those obtained using the additive scheme led to an average absolute difference of 0.73 kJ · mol⁻¹ for the gas-phase standard molar enthalpy of formation and 0.79 kJ · mol⁻¹ for the liquid-phase standard molar enthalpy of formation. The database used to establish the parameters was carefully reviewed by using, whenever possible, the original publications. A worksheet to simplify the calculation of standard molar enthalpies of formation and standard molar enthalpies of atomization at T = 298.15 K based on the extended Laidler parameters defined in this paper is provided as supplementary material.     

Standard molar enthalpies of formation of some methylfuran derivatives

The standard (p ^o = 0.1 MPa) molar enthalpies of formation \Updelta_\textf H_\textm^\texto ( \textl), {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{l),}} of the liquid 2-methylfuran, 5-methyl-2-acetylfuran and 5-methyl-2-furaldehyde were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of vaporization of the three compounds. The standard (p ^o = 0.1 MPa) molar enthalpies of formation of the compounds, in the gaseous phase, at T = 298.15 K have been derived from the corresponding standard molar enthalpies of formation in the liquid phase and the standard molar enthalpies of vaporization. The results obtained were −(76.4 ± 1.2), −(253.9 ± 1.9), and −(196.8 ± 1.8) kJ mol⁻¹, for 2-methylfuran, 5-methyl-2-acetylfuran, and 5-methyl-2-furaldehyde, respectively.     

Thermochemical study of 2- and 3-alkyl substituted thiophenes

The standard (p ⁰=0.1 MPa) molar enthalpies of formation, in the condensed phase, of nine linear-alkyl substituted thiophenes, six in position 2- and three in position 3-, at T=298.15 K, were derived from the standard massic energies of combustion, in oxygen, to yield CO₂(g) and H₂SO₄·115H₂O(aq), measured by rotating-bomb combustion calorimetry. The standard molar enthalpies of vaporization of these compounds were measured by high temperature Calvet Microcalorimetry, so their standard molar enthalpies of formation, in the gaseous phase, were derived. The results are discussed in terms of structural contributions to the energetics of the alkyl-substituted thiophenes, and empirical correlations are suggested for the estimation of the standard molar enthalpies of formation, at T=298.15 K, for 2- and 3-alkyl-substituted thiophenes, both in the condensed and in the gaseous phases.     

Experimental and computational investigation of the energetics of the three isomers of monochloroaniline

The standard (p degrees = 0.1 MPa) molar enthalpies of formation of 2-, 3-, and 4-chloroaniline were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of vaporization or sublimation of the three isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the three isomers of chloroaniline, in the gaseous phase, at T = 298.15 K, as 53.4 +/- 3.1 kJ.mol(-1) for 2-chloroaniline, 53.0 +/- 2.8 kJ.mol(-1) for 3-chloroaniline, and 59.7 +/- 2.3 kJ.mol(-1) for 4-chloroaniline. These values, which correct previously published data, were used to test the computational methodologies used. Therewith, gas-phase acidities, proton affinities, electron donor capacities, and N-H bond dissociation enthalpies were calculated and found to compare well with available experimental data for these parameters.