5,7′-(亚甲胺基)-二-8-羟基喹啉的合成及其理论研究

以4-甲基苯磺酸作催化剂、用三乙胺调节pH值约为9的条件下,由5-甲酰基-8-羟基喹啉和5-氨基-8-羟基喹啉合成了新的5,7′-(亚甲胺基)-二-8-羟基喹啉,利用IR,UV,1H NMR,MS确认了分子结构,比较研究了其光致发光特性,运用Gaussian 98量子化学程序包,采用B3LYP密度泛函(DFT)的方法,在6-31G(d,p)水平上对分子的几何构型进行结构优化;并对目标化合物的稳定结构通过计算预测其振动光谱,计算结果与实验值基本相符.     

5-甲基-3-硝基-4-异噁唑甲酰腙分子光谱的理论计算

采用B3LYP/3-21+G*方法,对5-甲基-3-硝基-4-异噁唑甲酰腙及其取代物的基态结构进行优化,用间略微分重叠(ZINDO)计算其电子吸收光谱(UV-Vis);用CIS/STO-3G方法优化其最低激发单重态的几何结构,用密度泛函理论方法TD-PBEPBE/6-311+G-water计算其发射光谱.同时还探讨了取代基的种类(如—CH3,—C2H5,—NH2等推电子基,—NO2,—Cl,—COOH等吸电子基)、取代基的位置(如邻位取代、间位取代、对位取代)和溶剂等因素对其衍生物电子光谱性质的影响.结果表明:标题物的模拟UV-Vis 3个光谱峰和其荧光发射最大值均与标题物分子的实验值基本符合;改变取代基的种类和位置等均可精细地调控标题物的光谱峰位和强度.     

5,7′-(亚甲胺基)-二-8-羟基喹啉的合成及其理论研究

以4-甲基苯磺酸作催化剂、用三乙胺调节pH值约为9的条件下, 由5-甲酰基-8-羟基喹啉和5-氨基-8-羟基喹啉合成了新的5,7′-(亚甲胺基)-二-8-羟基喹啉, 利用IR, UV, ¹H NMR, MS确认了分子结构, 比较研究了其光致发光特性, 运用Gaussian 98量子化学程序包, 采用B3LYP密度泛函(DFT)的方法, 在6-31G(d,p)水平上对分子的几何构型进行结构优化; 并对目标化合物的稳定结构通过计算预测其振动光谱, 计算结果与实验值基本相符.     

5,7''''-(亚甲胺基)-二-8-羟基喹啉的合成及其理论研究

以4-甲基苯磺酸作催化剂、用三乙胺调节pH值约为9的条件下,由5-甲酰基-8-羟基喹啉和5-氨基-8-羟基喹啉合成了新的5,7'-(亚甲胺基)-二-8-羟基喹啉,利用IR,UV,1HNMR,MS确认了分子结构,比较研究了其光致发光特性,运用Gaussian98量子化学程序包,采用B3LYP密度泛函(DFT)的方法,在6-31G(d,p)水平上对分子的几何构型进行结构优化;并对目标化合物的稳定结构通过计算预测其振动光谱,计算结果与实验值基本相符.     

5-氨基-4-乙氧羰基-3-(4,6-二甲基嘧啶-2-氨基)-1H-吡唑甲基化的量子化学研究

5-氨基-1H-吡唑的甲基化作用通常会生成一对产物, 但5-氨基-4-酯基-3-(4,6-二甲基嘧啶-2-氨基)-1H-吡唑和碘甲烷作用只得到了一个产物. 使用从头计算方法对这种例外进行了量子化学解释, 同时对甲基化反应的唯一产物运用密度泛函理论等量子化学方法进行结构优化及研究.     

5-醛基-1,2,3-三唑互变异构的理论研究

用密度泛函B3LYP/6-311++G**方法,对气相和水相中的5-醛基-1,2,3-三唑互变异构体进行了几何构型全自由度优化,获得了它们在气相和水相中的几何结构和电子结构.讨论了不同的取代基团和溶剂化效应对互变异构体的几何结构、能量以及互变异构反应活化能的影响.并进一步研究了N1-H、N2-H和N3-H型三唑之间的互变异构机理:(a)分子内质子转移;(b)水助质子转移.计算结果表明,途径(b)所需要的活化能较小,平均为101.31kJ/mol,途径(a)为211.70kJ/mol.     

(3-氮-吗啉)-1-(4-氯)-苯基-1-丙酮不对称还原产物光学活性的理论计算

采用AM1方法对(S)-4-苄基-5,5-二苯基-1,3,2-噁唑硼烷催化(3-氮-吗啉)-1-(4-氯)-苯基-1-丙酮不对称还原反应的立体控制步骤进行了计算,获得了R和S型过渡态的优化构型及其热焓和熵等热力学参数,计算得到了该步反应中生成R和S型对映体的反应速率常数之比,据此得到的不对称还原反应最终产物的光学活性e.e.的理论计算值,与实验结果相近.     

3-苯基-6-芳基-1,2,4-三唑并[3,4-b]-1,3,4-噻二唑的电子结构和光谱性质的含时密度泛函理论研究

对3-苯基-6-芳基-1,2,4-三唑并[3,4-b]-1,3,4-噻二唑(PATT)用量子化学密度泛函方法(DFT)在B3LYP/6-31G(d)水平上进行了几何构型的全优化, 探讨了分子电荷转移、前线轨道能量和电子光谱等性质的变化规律, 在此基础上采用含时密度泛函方法(TDDFT)计算了分子激发态的电子跃迁能. 将其与实验所得激发态的电子跃迁能结果相比, 理论计算最大相对偏差为0.071, 最小相对偏差为0.041.     

4-甲醛-1-甲基-1-苯基环己硅烷的从头算研究

运用从头计算法，在HF／6－31G水平上，求得4-甲醛-1-甲基-1-苯基环己硅烷的全优化几何构型和电子结构。将从头算结果与经典电子理论以及AM1和PM3半经验计算结果进行了比较和评估。     

3,3’-偶氮双(6-氨基-1,2,4,5-四嗪)新法合成、表征与量子化学研究

自行设计了3,3’-偶氮双(6-氨基-1,2,4,5-四嗪)(DAAT)新合成路线、采用3,5-双(3,5-二甲基吡唑-1-基)-1,2,4,5-四嗪(BDT)为原料, 由文献报道的4步反应缩减为2步, 经高压氨解、高锰酸钾氧化合成了DAAT, 总收率大幅提高, 达到58.1%, 并采用元素分析、红外光谱、核磁共振光谱等进行了结构表征. 为了从分子水平探索DAAT的性能, 采用B3LYP法, 在6-31G(d,p)基组水平上对DAAT的结构进行了优化, 计算了其性能, 获得稳定的几何构型、分子轨道及键级; 在振动分析的基础上求得体系的振动频率、IR谱及不同温度下的热力学性质, 并得温度对热力学性能影响的关系式. 结果表明: DAAT分子结构中偶氮基两侧的四嗪环和氨基基本在同一个平面上, 形成一个大的共轭π键; 红外谱计算频率和强度与实验结果整体吻合较好; 热能( )、热容( )和熵( )均随温度的升高而增大.     

Synthesis,Crystal Structure and Theoretical Calculations of N-Benzyl-1-(5-(3-chlorophenyl)-1,3,4-oxadiazol-2-yl)cyclopentanamine

N-benzyl-1-(5-(3-chlorophenyl)-1,3,4-oxadiazol-2-yl)cyclopentanamine was synthesized via one-pot reaction of appropriate benzylamine, cyclopentanone,(N-isocyanimino)triphenylphosphorane and m-chlorobenzoic acid. The quantum theoretical calculations for crystal structure were performed by density functional theory(DFT/B3LYP/6-311+G*). From the optimized structure, geometric parameters were obtained and experimental measurements were compared with the calculated data. Frontier molecular orbitals(FMOs), total density of states(DOS), molecular electrostatic potential(MEP), molecular properties, natural charges, NMR parameters and NBO analysis for the product were investigated by theoretical calculations.     

Electron group functions for the analysis of the electronic structures of molecules

The electronic structure of a vast majority of molecular systems can be understood in terms of electron groups and their wave functions. They serve as a natural basis for bringing intuitive chemical and physical concepts into quantum chemical calculations. This article considers the general electron group functions formalism as well as its simple geminal version. We try to characterize the wave function with the group structure and its capabilities in actual calculations. For this purpose we implement a variational method based on the wave function in the form of an antisymmetrized product of strongly orthogonal group functions and perform a series of electronic structure calculations for small molecules and model systems. The most important point studied is the relation between the choice of electron groups and the results obtained. We consider energetic characteristics as well as optimal geometry parameters. In view of practical importance, the structure of variationally optimized local one-electron states is considered in detail as well as intuitive characteristics of chemical bonds.     

Computational modeling of a stereoselective epoxidation: reaction of carene with peroxyformic acid

Electronic structure theory was used to model the epoxidation of 3-carene by peroxyformic acid. Reactants, products, and transition states were optimized at the B3LYP/6-31G* level of theory, followed by B3LYP/6-311+G** and MP2/6-311+G** single point calculations. The reaction pathway yielding the trans-epoxide product was found to have a significantly lower reaction barrier (7.8 kcal/mol) than that leading to the cis-epoxide product (9.4 kcal/mol), in agreement with expectations. Magnetic shieldings of the two isomeric carene epoxides were also calculated, using the GIAO method, and compared to experimental (1)H and (13)C NMR spectra. Although the calculated carbon spectra proved inconclusive, the proton shieldings calculated for the trans-epoxide correlated much more closely to the experimental values for the major epoxidation product than did the shieldings calculated for the cis-epoxide, serving to verify the identity of the major product.     

Density functional theory investigation of product distribution following reaction of acrylonitrile on diamond (001)-2 x 1 surface

The reaction of acrylonitrile with the C(001)-2 x 1 surface has been investigated by employing density functional cluster model calculations. The calculations revealed eight possible reaction pathways for acrylonitrile with the surface dimer. Full geometry optimized structures were obtained for all adducts, including intra- and interdimer reaction products. These results were analyzed in terms of both the total energy values and the detailed optimized geometries. We find that the reaction of acrylonitrile with the diamond (001) surface occurs primarily through its nonpolar C=C group and the intradimer [2+2](cc) product is the dominant product. All these results are in good agreement with the experimental work by Schwartz. It is noteworthy that the isomerization process plays an important role in the chemisorption process. Both intradimer [4+2] product and interdimer [2+2](cc) product can isomerize to the intradimer [2+2](cc) product. The present study shows that the isomerization between intradimer [4+2] product and intradimer [2+2](cc) product is slightly favorable over the direct path to formation of the intradimer [2+2](cc) product.     

Addition reaction of adamantylideneadamantane with Br2 and 2Br2: a computational study

Ab initio calculations were carried out for the reaction of adamantylideneadamantane (Ad=Ad) with Br2 and 2Br2. Geometries of the reactants, transition states, intermediates, and products were optimized at HF and B3LYP levels of theory using the 6-31G(d) basis set. Energies were also obtained using single point calculations at the MP2/6-31G(d)//HF/6-31G(d), MP2/6-31G(d)//B3LYP/6-31G(d), and B3LYP/6-31+G(d)//B3LYP/6-31G(d) levels of theory. Intrinsic reaction coordinate (IRC) calculations were performed to characterize the transition states on the potential energy surface. Only one pathway was found for the reaction of Ad=Ad with one Br2 producing a bromonium/bromide ion pair. Three mechanisms for the reaction of Ad=Ad with 2Br2 were found, leading to three different structural forms of the bromonium/Br3- ion pair. Activation energies, free energies, and enthalpies of activation along with the relative stability of products for each reaction pathway were calculated. The reaction of Ad=Ad with 2Br2 was strongly favored over the reaction with only one Br2. According to B3LYP/6-31G(d) and single point calculations at MP2, the most stable bromonium/Br3- ion pair would form spontaneously. The most stable of the three bromonium/Br3- ion pairs has a structure very similar to the observed X-ray structure. Free energies of activation and relative stabilities of reactants and products in CCl4 and CH2ClCH2Cl were also calculated with PCM using the united atom (UA0) cavity model and, in general, results similar to the gas phase were obtained. An optimized structure for the trans-1,2-dibromo product was also found at all levels of theory both in gas phase and in solution, but no transition state leading to the trans-1,2-dibromo product was obtained.     

Functionalization of diamond (001)‐2 × 1 surface by cycloaddition of 1,3‐cyclohexadiene: A theoretical study

Density functional theory calculations have been used to study [4 + 2] and [2 + 2] cycloaddition reaction between 1,3‐cyclohexadiene and diamond (001)‐2 × 1 surface. The calculations revealed four possible reaction pathways for 1,3‐cyclohexadiene with the surface dimmers of diamond. Full geometry‐optimized structures were obtained for all products, including intradimer and interdimer reaction products. These results were analyzed both in terms of the total energy values and the detailed optimized geometries. We found that the intradimer [4 + 2] product is energetically favored over the other products, and the barrier to intradimer [4 + 2] addition is lower than the other additions, so the intradimer [4 + 2] product is expected to be the dominant product on the surface. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Additive controlled,stereoselective benzylation of 2-thioxotetrahydropyrimidin-4(1H)-ones via chiral induction from a remote stereocenter

Stereoselective alkylation reactions of 3-aryl-1-alkyl-2-thioxotetrahydropyrimidin-4(1H)-one derivatives were studied. The reaction conditions were optimized to obtain the monobenzylated adduct with improved diastereoselectivity by regulating the reaction kinetics using HMPA as the additive and chiral ethyl lactate as the quencher. The absolute configuration of the product was established by NMR experiments, computational calculations, and single crystal X-ray analysis.