Conformation Control of Conjugated Polymers

In the past few decades, conjugated polymers have aroused extensive interest in organic electronic applications. The electrical performance of conjugated polymers has a close relationship with their backbone conformation. The conformation of the polymer backbone strongly affects the πelectron delocalization along polymer chains, the energy band gap, interchain interactions, and further affects charge transport properties. To realize a rigid coplanar backbone that usually possesses efficient intrachain charge transport properties and enhanced π–π stackings, such conformation control becomes a useful strategy to achieve high-performance (semi)conducting polymers. This minireview summarizes the most important polymer structures through conformation control at the molecular level, and then divides these rigid coplanar conjugated polymers into three categories: 1) noncovalent interactions locked conjugated polymers; 2) double-bond linked conjugated polymers; 3) ladder conjugated polymers. The effect of the conformation control on physical nature, optoelectronic properties, and their device performance is also discussed, as well as the challenges of chemical synthesis and structural characterization.     

Ramberg-Bcklund反应在构筑碳碳双键中的应用

碳碳双键是有机化学中最基本的官能团之一 ,在众多构筑碳碳双键的方法中Ramberg B cklund反应占有很重要的地位 .该方法的关键步骤是α 卤代砜在碱性条件下 ,发生 1,3 消除反应 ,得到环状砜 ,然后重排失去SO2 形成双键 ,这样形成的双键位置确定 ,即具有良好的区域选择性 ,并且在不同的反应条件下可得到不同构型的产物 ,因而在有机合成中有很好的应用前景 .对Ramberg B cklund反应进行了较为详细的综述 ,并对我们实验室所进行的反应条件的改进和优化以及目前的研究进展作了总结 .     

Further investigation of conjugated length and dispersity on light-driven hydrogen evolution facilitated by conjugated polymers

Conjugated length and dispersity are modulated by the incorporation of non-conjugated groups. The integration of 1,4-butanediylbis(oxy) groups into poly[(1,4-benzo{2,1,3}thiadiazole)-co-1,4-benzene] gives numerous co-polymers. The presence of the 1,4-butanediylbis(oxy) unit in the polymer backbone interrupts the conjugation length. The optical energy gap is not much affected. The variation in the hydrogen evolution rate (HER) is evident. Density-functional-theory calculations suggest that the distribution of residual Pd along the polymer chain could be influenced considerably by the introduction of 1,4-butanediylbis(oxy) group, accounting for the variation in the HER. On the other hand, a macromonomer with oligo tert-butyl acrylate side chains synthesized through atom transfer radical polymerization is copolymerized with 3,7-dibromo-dibenzothiophene 5,5-dioxide to furnish a random copolymer. The ester groups in the polymer can be transformed to the acid moieties. The polymer with the acid functionality exhibits superior dispersity in the reaction solvents. Nonetheless, the difference in the hydrogen-evolution activity is marginal between the two polymers, revealing that the increase in the polymer dispersity does not essentially improve the photoactivity for this reaction. These studies reveal that a structural variation could simultaneously lead to the alternation in numerous properties. Emphasis on a particular property could be misleading in designing active photocatalysts in hydrogen evolution.     

Porous Polymers Based on Aryleneethynylene Building Blocks

Porous conjugated polymers are synthesized by metal‐catalyzed coupling reactions. The progress for porous polymers when planar or tetrahedral building blocks are connected by alkyne units into novel materials is highlighted. The most prominent reaction for the buildup of the microporous alkyne‐bridged polymers is the Sonogashira reaction, connecting alkynes to aromatic iodides or bromides. The availability of the building blocks and the potency of the Sonogashira reaction allow preparing a large variety of intrinsically porous polymeric materials, in which rigid struts connect multipronged centers. The microporous polymers are used as catalysts and as storage materials for gases and sensors. Postfunctionalization schemes, understanding of structure‐property relationships, and the quest for high porosity are pertinent.

     

ALTERNATE PREDOMINANCE IN COMPETITION FOR CONJUGATION IN NITROGEN BRIDGE COMPOUND

It is demonstrated quantitatively that the serial number N is not m + n + 4 in the nitrogen bridge conjugated system (Ⅸ), so the lone pair of electrons on the nitrogen cannot conjugate with acenyl branch and formyl polyenic branch simultaneously. The character of UV spectra and substituent equivalents (△Ns) show that acenyl branch competes for the lone pair of electrons with formyl polyenic branch. If the length m of acenyl branch is lengthened while n keeps constant, a point where the acenyl branch is predominant over formyl polyenic branch in competition, will eventually be reached. On the other hand, the effect of the latter will become greater than the former. The effect of the two branches predominates each other alternately with the alternate increase in m and n values.     

Luminescence properties of PPV derivatives bearing substituted carbazole pendants

A series of PPV derivatives bearing substituted and unsubstituted carbazole and 2-ethylhexyloxy pendants were prepared and their photo- (PL) and electroluminescence (EL) properties were studied. Substituted carbazole structures were N-phenylcarbazole and 3,6-dimethoxycarbazole. The substituents on the carbazole pendants caused little change in UV-vis absorption, PL, and EL when compared with the polymer bearing the unsubstituted carbazole pendants. The presence of the benzene ring between the main chain and the carbazole pendant increased the threshold electric field in EL. We could obtain maximum brightness of ca. 17,000 - 30,000 cd/m² for the polymers carrying the unsubstituted and dimethoxy substituted carbazole pendants.     

Multi‐Sensitive Microgels Filled with Conducting Poly(3,4‐ethylenedioxythiophene) Nanorods

In this work we describe the synthesis of multi‐sensitive aqueous microgel particles with incorporated conducting poly(3,4‐ethylenedioxythiophene) (PEDOT) nanorods. We demonstrate that the loaded amount of PEDOT nanorods as well as their morphology can be varied by controlling the reaction conditions such as monomer concentration and alcohol concentration in aqueous phase. Obtained microgels can be stimulated by changes in the environment temperature as well as by the repulsion/attraction forces within polymeric network due to the reversible oxidation/reduction of the conjugated polymer. Microgels with unique properties can be operated in colloidal systems or used as building blocks for the preparation of nanostructured films.

     

End-functionalized π-conjugated oligomeric materials for photoelectrical applications

Soluble poly(diphenylacetylene)s (PDA) capped with PhCO- groups (PDA-C) and Ph₂C= groups (PDA-P) were prepared via McMurry reductive coupling of benzil and carbonyl-olefin exchange reaction of tetraphenylethene and benzil, respectively. Fluoren-9-ylidene groups have been introduced into PDA by the McMurry coupling of PDA-C with fluoren-9-one and via copolymerization of benzil and fluoren-9-one. The oligomers prepared are stable in air, soluble in a variety of solvents. They can be processed by casting to form good-quality thin films suitable for measurements of electrical and optoelectrical properties.     

Synthesis and surfactochromicity of 1,4‐diketopyrrolo[3,4‐c]pyrrole(DPP)‐based anionic conjugated polyelectrolytes

Two novel anionic conjugated copolyelectrolytes PSDPPPV and PSDPPPE were synthesized via Heck/Sonogashira coupling reactions and characterized by FT‐IR, ¹H NMR, UV‐vis, and PL spectroscopy. The two polymers are respectively constituted of 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPV) and 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPE) with 1,4‐diketo‐2,5‐bis(4‐sulfonylbutyl)‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (SDPP) which is a novel water soluble diketopyrrolopyrrole derivative. PSDPPPV and PSDPPPE show broad absorption band in visible region and they exhibit strong fluorescence quenching in aqueous solution. The fluorescence of their aqueous solutions can be enhanced in the presence of cationic surfactant or polymer nonionic surfactant. Fluorescence enhancement by introduction of polyvinylpyrrolidone (PVP) shows linear response. This result provides a controllable method to increase fluorescence intensity of dipyrrolopyrrole‐based conjugate polyelectrolytes in aqueous phase. The optical properties suggested that PSDPPPV and PSDPPPE which are negatively charged conjugated polymers can assemble with positively charged photovoltaic materials to form ionic photoactive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 739–751     

O-Trimethylsilylenol ethers as versatile building blocks in a modular preparation of polyenic backbone

Versatility and synthetic potential of 1-(trimethylsilyloxy)-1,3-butadiene, 1-(trimethylsilyloxy)penta-1,3-diene, and their methyl substituted derivatives have been demonstrated in a modular synthetic methodology of stereodefined π-conjugated unsymmetrical, symmetrical two-dimensional, and octupolar polyenal structure.     

Highly luminescent diyne (?CC?CC?) containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer: Synthesis and characterization

Luminophoric dialdehyde 1,4‐bis[4‐formylphenylethynyl‐(2,5‐dioctadecyloxyphenyl)‐buta‐1,3‐diyne] ( 4 ) enables the synthesis of diyne‐containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer poly[1,4‐phenylene‐ethynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐butadi‐1,3‐ynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethynylene‐1,4‐phenylene‐ethene‐1,2‐diyl‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethene‐1,2‐diyl] ( 7 ) with a well‐defined general structure (? Ph? C?C? Ar? C?C? C?C? Ar? C?C? Ph? CH?CH? Ar? CH?CH? )_n, which was confirmed by NMR and infrared spectroscopy. The highly luminescent material is thermostable, soluble in usual organic solvents through the grafting of octadecyloxy side groups, and can be processed into transparent films. With the aim to investigate the effect of ? C?C? C?C? in the photophysical behavior of 7 , a comparison of the photophysics of monomers 3 [1,4‐bis(4‐formylphenylethynyl)‐2,5‐dioctadecyloxybenzene] and 4 and subsequently of their respective polymers 6 and 7 has been carried out. Similar photophysical behaviors for 6 (poly[1,4‐phenylenethynylene‐1,4‐(2,5‐dioctadecyloxyphenylene)ethene‐1,2‐diyl]) and 7 were observed in dilute CHCl₃ solution as a result of an identical chromophore system responsible for the absorption (λ_a = 448 nm) and emission (λ_f = 490 nm) in both compounds. The increased planarization and enhanced rigidity of the conjugated backbone in the solid state at room temperature as well as in frozen dilute tetrahydrofuran solution at 77 K cause the bathochromic shift of the absorption and emission spectra. The large octadecyloxy side chains obviously limit strong π‐π interchain interactions in the solid films, which explains the high fluorescence quantum yields of 35 and 52% obtained for 6 and 7 , respectively. The energetically arduous migration of the π electron through the diyne units not only requires a higher threshold voltage for the detection of photoconductivity in 7 but could possibly limit radiationless deactivation channels of the exciton, which explains the approximate 20% fluorescence quantum yields difference between 6 and 7 in the solid state. The electron‐withdrawing effect of the triple bonds confer both 6 and 7 with a good electron‐accepting property (E^ox = 1.39 V vs Ag/AgCl) if used in light‐emitting diode devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2670–2679, 2002     

Hydrophilic Conjugated Materials for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution is viewed as a promising green strategy to utilize the inexhaustible solar energy and provide clean hydrogen fuels with zero‐emission characteristic. The nature of semiconductor‐based photocatalysts is the key point to achieve efficient photocatalytic hydrogen evolution. Conjugated materials have been recently emerging as a novel class of photocatalysts for hydrogen evolution and photocatalytic reactions due to their electronic properties can be well controlled via tailor‐made chemical structures. Hydrophilic conjugated materials, a subgroup of conjugated materials, possess multiple advantages for photocatalytic applications, thus spurring remarkable progress on both material realm and photocatalytic applications. This minireview aims to provide a brief review of the recent developments of hydrophilic conjugated polymers/small molecules for photocatalytic applications, and special concern on the rational molecular design and their impact on photocatalytic performance will be reviewed. Perspectives on the hydrophilic conjugated materials and challenges to their applications in the photocatalytic field are also presented.     

Space charge distribution in luminescent conjugated polymers

We have used for the first time the laser intensity modulation method (LIMM) to resolve the depth profile of space charges in films of poly[(2-(2-ethylhexyl)-5-methoxy-1,4-phenylene)vinylene] (MEH-PPV), poly(pyridine-2,5-diyl) (PPY) and poly(fluorene) (PFO). The results demonstrate that in conjugated polymers space charges can not only be created but also stored permanently.     

以环共轭烃为重复单元的环多聚共轭烃的稳定性

利用CNDO/2法讨论了以环共轭烃为重复单元的环多聚共轭烃的稳定性,得到C_4H_2是最可能的潜在合成物的结论。     

Design of molecular magnets

The conventional magnetic materials used in present-day technology, such as Fe, Fe₂O₃, Cr₂O₃, SmCo₅, Nd₂Fe₁₄B, etc. are all atom-based, whose synthesis requires high-temperature routes. Employing ambient-temperature synthetic organic chemistry, it has become possible to engineer a bulk molecular material with long-range magnetic order, primarily due to the weak nature of intermolecular interactions in it. Typical synthetic approach to design molecule-based magnets consists of choosing molecular precursors, each bearing an unpaired spin, and assembling them in such a way that there is no compensation of spins at the scale of the crystal lattice. Magnetism being a co-operative effect, the spin-spin interaction must extend to all the three dimensions, either through space or through bonds. Specific occurrence of ‘spin delocalisation’ and ‘spin polarisation’ in molecular lattices is helpful in bringing about ferromagnetic interaction by facilitating necessary intermolecular exchange interactions. Since the first successful synthesis of molecular magnets in 1986, a large variety of them have been synthesized, which can be classified on the basis of the chemical nature of the magnetic units involved: organic systems, metal-based systems, hetero-bimetallic assemblies, or mixed organic-inorganic systems. The design of molecular magnets has also opened the doors for the unique possibility of designing polyfunctional molecular materials, such as magnets exhibiting second-order optical nonlinearity, liquid crystalline magnets, or chiral magnets. Solubility of molecular magnets, their low density and biocompatibility are attractive features. Being weakly colored, unlike the opaque classic magnets, possibilities of photomagnetic switching can be envisaged. Persistent efforts continue to design the ever-elusive polymer magnets for applications in industry. While providing a brief overview of the field of molecular magnetism, we highlight some recent developments, with emphasis on a few studies from the author's own lab.     

On zeroth-order general Randić index of conjugated unicyclic graphs

Let G be a graph and d _v denote the degree of the vertex v in G. The zeroth-order general Randić index of a graph is defined as where α is an arbitrary real number. In this paper, we investigate the zeroth-order general Randić index of conjugated unicyclic graphs G (i.e., unicyclic graphs with a perfect matching) and sharp lower and upper bounds are obtained for depending on α in different intervals.     

Synthesis and properties of new fluorinated ester,thioester, and amide substituted polythiophenes. Towards superhydrophobic surfaces

A series of new fluorinated polythiophenes has been synthesized by oxidative chemical and electrochemical polymerization and by Ullmann coupling. The substitution with the perfluoroalkyl alkyl chain CH₂CH₂C₆F₁₃ on the 3 position of the thiophene ring is performed via an ester, thioester, or amide connector, (CH₂)_m‐C(O)X, m = 0–2, with a view to investigating the role of the linker on the polymerization and on the properties of the corresponding polymers. The bromination of the monomers at the 2 and 5 positions allows the use of Ullmann coupling to form soluble fluorinated oligomers. The electron affinity was determined from cyclic voltammetry and a value of 3.1 eV was found for the ester derivative; such materials represent interesting candidates for use in light‐emitting devices or as an electron accepting material in photodiodes/solar cells. The oxidative polymerizations need the connector to be spaced out from the heterocycle to reduce its withdrawal effect. The ester, thioester, and amide spacer determined to a large extent the efficiency of the oxidative polymerization, and particularly the electropolymerization, as well as the solubility of the polymers formed. All the polymers were analyzed by GPC and by UV–visible and fluorescence spectroscopies. The electrochemical oxidation of the thioester and amide group prevents the formation of electroactive films by electropolymerization. But in the case of the ester group, the electroformed polymer exhibits exceptional stable superhydrophobic and lipophobic properties because of a porous surface and the presence of a fluorinated chain that confers low surface energy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4707–4719, 2007     

Water‐soluble dendritic‐conjugated polyfluorenes: Synthesis,characterization, and interactions with DNA

Three generation of Boc‐protected dendritic‐conjugated polyfluorenes ( Boc‐PFP‐G_0‐2 ) were synthesized by Suzuki coupling 1,4‐phenyldiboronic ester with dendritic monomers that were synthesized through generation‐by‐generation approach. The gel permeation chromatography (GPC) analyses showed that the weight‐average molecular weight (M_w) of Boc‐PFP‐G_0‐2 was in the range of 11,400–20,400 Da with the polydispersity index (PDI) in the range of 1.32–1.96. Treatment of Boc‐protected polymers with 6 M HCl in dioxane yielded cationic dendritic‐conjugated polyfluorenes ( PFP‐G_0‐2 ). They were soluble in common polar solvents such as DMSO, DMF, and water with absorption maxima between 345 and 379 nm. The solutions of PFP‐G_0‐2 in water were highly fluorescent with emission maxima between 416 and 425 nm. Because higher generation dendrons could prevent the formation of π‐stacking aggregates of backbones of conjugated polymer, the fluorescence quantum efficiencies (QEs) of PFP‐G_0‐2 enhance as the dendritic generation grew. The interactions between 25 mer double‐stranded DNA (dsDNA) and PFP‐G_0‐2 were studied using ethidium bromide (EB) as fluorescent probe. The electrostatic bindings of PFP‐G_0‐2 with dsDNA/EB complex result in displacement of EB from DNA double helix to the solution accompanying by a quenching of EB fluorescence. The PFP‐G₂ with highest generation of dendritic side chains possessed a highest charge density and could form most stable complex with dsDNA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7462–7472, 2008     

Synthesis and characterization of isoindigo‐based polymers using CH‐arylation polycondensation reactions for organic photovoltaics

A series of three new low bandgap donor–acceptor–donor–acceptor^/ (D–A–D–A^/) polymers have been successfully synthesized based on the combination of isoindigo as the electron‐deficient acceptor and 3,4‐ethylenedioxythiophene as the electron‐rich donor, followed by CH‐arylation with different acceptors (4,7‐dibromo[c][1,2,5]‐(oxa, thia, and/or selena)diazole ( 4a‐c )). These polymers were used as donor materials for photovoltaic applications. All of the polymers are highly stable and show good solubility in chlorinated solvents. The highest power conversion efficiency of 1.6% was achieved in the bulk heterojunction photovoltaic device that consisted of poly ((E)?6‐(7‐(benzo‐[c][1,2,5]‐thiadiazol‐4‐yl)?2,3‐dihydrothieno‐[3,4‐b][1,4]dioxin‐5‐yl)?6′‐(2,3‐dihydrothieno‐[3,4‐b][1,4]‐dioxin‐5‐yl)?1,1′‐bis‐(2‐octyldodecyl)‐[3,3′‐biindolinylidene]‐2,2′‐dione) as the donor and PC₆₁BM as the acceptor, with a short‐circuit current density (J_sc) of 8.10 mA/cm², an open circuit voltage (V_oc) of 0.56 V and a fill factor of 35%, which indicates that these polymers are promising donors for polymer solar cell applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2926–2933     

Synthesis and polymerization of phenylacetylene having two carbazole units and properties of the formed polymer

Novel carbazole‐containing acetylene monomer, 1‐(3‐ethynyl‐9‐carbazoyl)?4‐(9‐carbazoyl)benzene 1 was synthesized, polymerized, and copolymerized with phenylacetylene ( PA ) using [(nbd)RhCl]₂‐Et₃N, Rh⁺(nbd)[η⁶‐C₆H₅B^–(C₆H₅)₃], and WCl₆‐Ph₄Sn as catalysts. Polymers with number‐average molecular weights ranging from 7800 to 33,200 were obtained in 60%–quantitative yields. The absorption band edge of poly( 1 ‐co‐ PA ) ( 1 :PA = 8:2) was positioned at a wavelength longer than those of 1 and polyvinylcarbazole. Poly( 1 ‐co‐ PA ) ( 1:PA = 8:2) emitted fluorescence with 60% quantum yield. Poly( 1 ‐co‐ PA ) ( 1:PA = 8:2) worked as a hole transport material of an OLED with tris(8‐hydroxyquinoline)aluminum (Alq3) as an emission material. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1245–1251