Electrochemical and catalytic investigations of epinephrine,acetaminophen and folic acid at the surface of titanium dioxide nanoparticle-modified carbon paste electrode

In the present paper, the use of a carbon paste electrode modified with 1-(4-(1, 3-dithiolan-2-yl)-6, 7-dihydroxy-2-methyl-6, 7-dihydrobenzofuran-3-yl)ethanone (DDE) and TiO₂ nanoparticles prepared by a simple and rapid method was described. The modified electrode showed excellent properties for electrocatalytic oxidization of epinephrine (EP), acetaminophen (AC) and folic acid (FA). The apparent charge transfer rate constant, k _s?=?1.14 s^?1, and transfer coefficient, α?=?0.54, for electron transfer between the modifier and carbon paste electrode were calculated. It has been found that under optimum condition (pH?=?7.0) in cyclic voltammetry, the oxidation of EP occurs at a potential about 280 mV less positive than that of an unmodified carbon paste electrode. The values of transfer coefficients (α?=?0.46), catalytic rate constant (k?=?1.2?×?10⁴ M^?1 s^?1) and diffusion coefficient (D?=?2.70?×?10^?5 cm² s^?1) were calculated for EP. Differential pulse voltammetry (DPV) exhibited two linear dynamic ranges of 0.5 to 50.0 μM and 50.0 to 1,000 μM for EP. This modified electrode is quite effective not only for the detection of EP, AC and FA but also for the simultaneous determination of these species in a mixture. The limit of detection for EP, AC and FA is 0.10, 1.80 and 2.36 μM, respectively.     

The first electrochemical sensor for determination of mangiferin based on an ionic liquid–graphene nanosheets paste electrode

A novel carbon paste electrode modified with graphene nanosheets and an ionic liquid (n-hexyl-3-methylimidazolium hexafluoro phosphate) was fabricated and used for the electrochemical study of mangiferin for the first time. This modified electrode offers a considerable improvement in voltammetric sensitivity toward mangiferin, compared to the bare electrode. Square wave voltammetry (SWV) exhibits a linear dynamic range from 5.0?×?10^?8 to 2.0?×?10^?4 M and a detection limit of 20.0 nM for mangiferin. Finally, the proposed method was successfully applied to the determination of mangiferin in real samples such as serum and urine.     

Voltammetric determination of hydroxylamine in water samples using a 1-benzyl-4-ferrocenyl-1H-[1,2,3]-triazole/carbon nanotube-modified glassy carbon electrode

A modified glassy carbon electrode has been constructed using a 1-benzyl-4-ferrocenyl-1H-[1,2,3]-triazole along with multiwalled carbon nanotubes. The electrochemical behaviour of modified electrode has been investigated by cyclic voltammetry. Electrocatalytic activity of the modified electrode was investigated for the oxidation of hydroxylamine in 0.1 M phosphate-buffered solution of pH 8. The modified electrode showed electrocatalytic response to the oxidation of hydroxylamine at the potential of 330 mV. The linear range and detection limit for the detection of hydroxylamine in the optimum condition were found to be 4.0?×?10^?7 to 6.75?×?10^?4 M and 28.0?±?1.0 nM, respectively. Finally, the method was employed for the determination of hydroxylamine in water samples.     

Voltammetric determination of uric acid in the presence of ascorbic acid and dopamine using chitosan/ionic liquid composite electrode

A chitosan/ionic liquid composite electrode was prepared and used to determine uric acid (UA) in the presence of a large excess of ascorbic acid (AA) and dopamine (DA) by linear sweep voltammetry (LSV). The modified electrode shows large peak separations between DA, AA, and UA. Due to the existence of chitosan and ionic liquid in the composite, the modified electrode exhibits strong electrochemical catalytic activity toward the oxidation of UA. Under optimal conditions, the peak current is linearly dependent on the UA concentration in the range of 5?×?10^?7–2?×?10^?4 M in the presence of 5?×?10^?4 M AA and 5?×?10^?5 M DA with a correlation coefficient of 0.9978, and the detection limit is 5?×?10^?8 M at a signal-to-noise ratio of 3. With good sensitivity and stability, the constructed sensor was applied in the determination of UA in human serum samples and satisfactory results were obtained.     

New voltammetric strategy for simultaneous determination of norepinephrine, acetaminophen, and folic acid using a 5-amino-3′,4′-dimethoxy-biphenyl-2-ol/carbon nanotube paste electrode

A carbon paste electrode modified with 5-amino-3??,4??-dimethoxy-biphenyl-2-ol and carbon nanotubes was used for the sensitive voltammetric determination of norepinephrine (NE). The electrochemical response characteristics of the modified electrode toward NE, acetaminophen (AC), and folic acid (FA) were investigated by cyclic and square wave voltammetry (SWV). The results show an efficient catalytic activity of the electrode for the electrooxidation of NE, which leads to lowering its overpotential more than 160?mV. The modified electrode exhibits an efficient electron-mediating behavior together with well-separated oxidation peaks for NE, AC, and FA. Under the optimum pH of 7.0 in 0.1?M phosphate buffer solution, the SWV anodic peak current showed a linear relation vs. NE concentration in the range of 15.0 to 1,000.0???M with a detection limit of 8.0???M.     

Electrochemical methods for determination of thymine in medical pipefish samples based on HPMαFP/Ppy/GCE-modified electrode

A sensitive electrochemical method was developed for the voltammetric determination of thymine at a composite film-modified electrode 1-phenyl-3-methyl-4-(2-furoyl)-5-pyrazolone (HPMαFP)/polypyrrole (Ppy)/glassy carbon electrode (GCE). The electrochemical parameters of thymine were investigated by cyclic voltammetry and differential pulse voltammetry. In pH?=?7.4, one sensitive oxidation peak of thymine with E _pa?=?0.968 V was observed on the HPMαFP/PPy-modified electrode. The difference of peak potential (?E _pa) was 188 mV lower than that for bare GCE. Compared to the bare GCE and Ppy/GCE, the HPMαFP/Ppy/GCE-modified electrode showed an excellent electrocatalytic effect on the oxidation of thymine and displayed a shift of the oxidation potential in the negative direction with significant increase in the peak current. Under the optimum condition, the concentration calibration range and detection limit are 2?×?10^?6–1?×?10^?4 and 4.85?×?10^?7?M for thymine. This developed method had been applied to the direct determination of thymine in medical pipefish samples with satisfactory results.     

Nanostructured base electrochemical sensor for voltammetric determination of homocysteine using a modified single-walled carbon nanotubes paste electrode

A carbon paste electrode modified with benzoylferrocene (BF) and carbon nanotubes (CNTs) have been applied to the electrocatalytic oxidation of homocysteine which reduced the overpotential by about 165 mV with an obvious increase in the current response. The transfer coefficient (α) for the electrocatalytic oxidation of homocysteine and diffusion coefficient of this substance under the experimental conditions were also investigated. In a phosphate buffer solution (PBS) of pH 7.0, the oxidation current increased linearly with two concentration intervals of homocysteine; one is 0.1 to 10.0 μM, and the other is 10.0 to 80.0 μM. The detection limit (3σ) obtained by square wave voltammetry (SWV) was 50.0 nM. The proposed method was successfully applied to the determination of homocysteine in real samples.     

Benzoylferrocene-modified carbon nanotubes paste electrode as a voltammetric sensor for determination of hydrochlorothiazide in pharmaceutical and biological samples

The electrooxidation of hydrochlorothiazide (HCT) at the surface of a benzoylferrocene modified multi-walled carbon nanotube paste electrode was studied using electrochemical approaches. Under the optimized conditions (pH 7.0), the square wave voltammetric peak current of HCT increased linearly with HCT concentration in the ranges of 6.0?×?10^?7 to 3.0?×?10^?4 M. The detection limit was 9.0?×?10^?8 M HCT. The diffusion coefficient (D?=?1.75?×?10^?5 cm²/s) and electron transfer coefficient (α?=?0.45) for HCT oxidation were also determined. The proposed sensor was successfully applied for the determination of HCT in human urine and tablet samples.     

Enhanced electrocatalytic oxidation of hydroxylamine on Pt/polypyrrole composite modified glassy carbon electrode

A sensitive hydroxylamine sensor is developed by electrodeposition of Pt nanoparticles on pre-synthesized polypyrrole nanoparticles modified glassy carbon electrode. The modified electrode presents distinctly electrocatalytic activity toward hydroxylamine oxidation. The kinetic parameters such as the overall numbers of electrons involved in hydroxylamine oxidation, the electron transfer coefficient, standard heterogeneous rate constant, and diffusion coefficient are evaluated. The current response increases linearly with increasing hydroxylamine concentrations and exhibits two wide linear ranges of 5.0?×?10^?7–1.1?×?10^?3 and 1.1?×?10^?3–18.8?×?10^?3 M with a detection limit of 0.08 μM (s/n?=?3). The proposed electrode presents excellent operational and storage ability for determining hydroxylamine. Moreover, the sensor shows good sensitivity, selectivity, and reproducibility properties.     

Highly sensitive electrochemical detection of dopamine and uric acid on a novel carbon nanotube-modified ionic liquid-nanozeolite paste electrode

A novel biosensor has been constructed by incorporating modified nanosized natural zeolite and 3-hydroxypropanaminium acetate (HPAA) as a novel room temperature ionic liquid, supported on multiwalled carbon nanotube (MWCNTs) and employed for the simultaneous determination of dopamine (DA) and uric acid (UA). A detailed investigation by transmission electron microscopy and electrochemistry is performed in order to elucidate the preparation process and properties of the composites. The voltammetric studies using the modified carbon paste electrode show two well-resolved anodic peaks for DA and UA with a potential difference of 160 mV, revealing the possibility of the simultaneous electrochemical detection of these compounds. The modified carbon paste electrode shows good conductivity, stability, and extraction effect due to the synergic action of HPAA, MWCNTs, and iron ion-doped natrolite zeolite. Under optimized conditions, the peak currents are linear from 8.12?×?10^?7 to 3.01?×?10^?4?mol?L^?1 and from 9.31?×?10^?7 to 3.36?×?10^?4?mol?L^?1 with detection limits of 1.16?×?10^?7 and 1.33?×?10^?7?mol?L^?1 for DA and UA using the differential pulse voltammetric method, respectively. Finally, the modified carbon paste electrode proved to have good sensitivity and stability and is successfully applied for the simultaneous determination of DA and UA in human blood serum and urine samples.     

Nanomolar detection limit for determination of norepinephrine in the presence of acetaminophen and tryptophan using carbon nanotube-based electrochemical sensor

A carbon paste electrode modified by carbon nanotubes and a synthesized hydroquinone derivative (abbreviated as DHB) was fabricated. It was used as an electrochemical sensor for simultaneous determination of norepinephrine (NE), acetaminophen (AC), and tryptophan (Trp). Oxidation potential of NE decreased about 220 mV at the modified electrode in comparison with unmodified electrode because of electrocatalysis of oxidation of NE via E? mechanism at the modified electrode. Differential pulse voltammetry was used for obtaining the calibration plot of NE and two linear range of 0.2–20.0 μM and 20.0–1,500.0 μM and an interesting detection limit (3σ) of 40.0 nM were obtained for NE. Also, simultaneous determination of NE, AC, and Trp was described by the proposed sensor and linear range of 20.0–800.0 μM was found for AC and Trp. Finally, the electrochemical sensor was used for the determination of NE, AC, and Trp in mixture.     

Novel nanostructured electrochemical sensor for voltammetric determination of N-acetylcysteine in the presence of high concentrations of tryptophan

A carbon paste electrode chemically modified with multiwall nanotubes and ethynylferrocene (ETFc) was used as a selective and sensitive electrochemical sensor for the determination of minor amounts of N-acetylcysteine (N-AC) in the presence of a high concentration of tryptophan (Trp). Square wave voltammetry (SWV) of N-AC at the modified electrode exhibited linear dynamic range with a detection limit (3 s) of 0.08 μmol?L^?1. The separations of anodic peak potentials of N-AC and Trp reached 400 mV using SWV. With good selectivity and sensitivity, the present method provides a simple method for selective detection of N-AC in real samples such as drug and urine.     

Differential pulse anodic stripping voltammetric determination of Hg2+ at poly(Eriochrome Black T)-modified carbon paste electrode

The electrochemical behavior of Hg²⁺ was investigated in poly(Eriochrome Black T)-modified carbon paste electrode (CPE) using cyclic voltammetry (CV). Poly(Eriochrome Black T) was prepared in an alkaline medium on the surface of the CPE using a solution of Eriochrome Black T with the CV technique. The electrochemical impedance study revealed a better charge transfer kinetics at the modified electrode. The effects of variation of the experimental conditions, such as the concentration of electrolytes, pH, deposition time, and the deposition potential, which maximize current efficiency were studied. The optimum response of Hg²⁺ was observed in 1.0 M KCl solution. The differential pulse anodic stripping voltammetric technique was employed successfully to detect Hg²⁺, which gave a good linear response at low concentration levels of Hg²⁺. The detection limit was found to be 2.2?×?10^?10 M (S/N?=?3), which is comparable with that achieved in multiwall carbon nanotube-modified electrode. The remarkable electroanalytical performance of the modified electrode makes it amenable to employ it successfully as an electrochemical sensor for the determination of hazardous pollutant Hg²⁺ in environmental samples.     

A selective sensor for nanolevel detection of lead (II) in hazardous wastes using ionic-liquid/Schiff base/MWCNTs/nanosilica as a highly sensitive composite

An effective potentiometric sensor had been fabricated for the rapid determination of Pb²⁺ based on carbon paste electrode consisting of room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆), multiwalled carbon nanotubes (MWCNTs), nanosilica, synthesized Schiff base, as an ionophore, and graphite powder. The constructed nanocomposite electrode showed better sensitivity, selectivity, response time, response stability, and lifetime in comparison with typical Pb²⁺ carbon paste electrode for the successfully determination of Pb²⁺ ions in water and in waste water samples. The best response for nanocomposite electrode was obtained with electrode composition of 18% ionophore, 20% BMIM-PF₆, 49% graphite powder, 10% MWCNT, and 3% nanosilica. The new electrode exhibited a Nernstian response (29.76?±?0.10 mV decade^?1) toward Pb²⁺ ions in the range of 5?×?10^?9?C1.0?×?10^?1 mol L^?1 with a detection limit of 2.51?×?10^?9 mol L^?1. The potentiometric response of prepared sensor is independent of the pH of test solution in the pH range of 4.5?C8.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition, and heavy metal ions.     

Electrocatalytic oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine at carboxylic acid functionalized multi-walled carbon nanotubes modified carbon paste electrode

The electrocatalytic oxidation of l-tyrosine (Tyr) was investigated on a carboxylic acid functionalised multi-walled carbon nanotubes modified carbon paste electrode using cyclic voltammetry and amperometry. The surface morphology of the electrodes was studied using field emission (FE)-SEM images, and the interface properties of bare and modified electrodes were investigated by electrochemical impedance spectroscopy (EIS). The influence of the amount of modifier loading and the variation of the pH of the solution on the electrochemical parameters have been investigated. Cyclic voltammetry was carried out to study the electrochemical oxidation mechanism of Tyr, which showed an irreversible oxidation process at a potential of 637.0 mV at modified electrode. The anodic peak current linearly increased with the scan rate, suggesting that the oxidation of Tyr at modified electrode is an adsorption-controlled process. A good linear relationship between the oxidation peak current and the Tyr concentration in the range of 0.8–100.0 μM was obtained in a phosphate buffer solution at pH 7.0 with a detection limit of 14.0?±?1.36 nM (S/N?=?3). The practical utility of the sensor was demonstrated by determining Tyr in spiked cow’s milk and human blood serum. The modified electrode showed excellent reproducibility, long-term stability and antifouling effects.     

Ultrasonic preparation of tetraoxalyl ethylenediamine melamine resin-coated multiwalled carbon nanotubes for trace Ni(II) sensing

Under an aid of ultrasonic, tetraoxalyl ethylenediamine melamine resin-coated multiwalled carbon nanotubes were prepared for Ni(II) sensing in aqueous solution. The processes involved the fabrication of tetraoxalyl ethylenediamine melamine resin by one pot way, the coating of tetraoxalyl ethylenediamine melamine resin at multiwalled carbon nanotubes (MWCNTs), and the determination of Ni(II). The present materials were carefully examined by Fourier transform infrared spectroscopy, field emission scanning electron microscope, and electrochemistry techniques. A great deal of amorphous microsphere could be observed for tetraoxalyl ethylenediamine melamine resin with an average diameter of 1.2 μm, and MTE could evenly adhere at the surface of MWCNTs by the ultrasonic. Tetraoxalyl ethylenediamine melamine resin-coated multiwalled carbon nanotube-modified paraffin-impregnated graphite electrode was successfully used for the determination of Ni(II) by differential pulse adsorptive anodic stripping voltammetry. The current responses (?0.3 V) were linearly increased depending on the concentration from 1?×?10^?11 to 3?×?10^?10 M (i (μA)?=?11.1?+?7.9 c (1?×?10^?12 M); R?=?0.9901, 3σ?=?7?×?10^?12 M).     

Evaluation of carbon-supported copper phthalocyanine (CuPc/C) as a cathode catalyst for fuel cells using Nafion as an electrolyte

Carbon-supported copper phthalocyanine (CuPc/C) nanoclusters, as a novel suitable cathode catalyst in polymer electrolyte membrane fuel cells, have been synthesized via a combined solvent impregnation and milling procedure along with high-temperature treatment. For optimizing the electrocatalytic activity of the catalyst obtained, the electrode with varying Nafion ionomer contents in the catalyst layer was screened by cyclic voltammetry and linear sweep voltammetry employing a rotating disk electrode technique to investigate the effect of Nafion ionomer as for alkaline electrolyte. For comparative purposes, electrode with various contents of available anion-ionomer was also investigated. The results revealed that the content of Nafion ionomer can affect the oxygen reduction reaction activity of the CuPc/C catalyst and an optimal content of Nafion ionomer was around 3.5?×?10¹?μg?cm^?2, which corresponds well with the electrode prepared using available anion-ionomer. The electrode prepared using Nafion ionomer can produce a comparable performance to that of using available anion-ionomer, giving an onset potential at 0.1 V with a half-wave potential of ?0.03 V. Furthermore, Koutechy–Levich analysis showed that the value of electron transfer number is in the range of 3.40 to 3.74 when using electrode with varying Nafion ionomer contents from 2.5?×?10¹ to 1.6?×?10²?μg?cm^?2. The membrane electrode assembly fabricated with the CuPc/C cathode catalyst with a loading of 3.6 mg?cm^?2 and a Nafion membrane immersed in 3 M KOH for 48 h produced a power density of 3.8 mW?cm^?2 at room temperature.     

An electrochemical sensor based on carbon nanotubes and a new Schiff base for selective determination of dopamine in the presence of uric acid, folic acid, and acetaminophen

In this paper, the electrochemical properties of a carbon paste electrode modified by a synthesized Schiff base, 2,2′-[1,4-phenylenediyl-bis(nitrilomethyl-idene)]-bis(4-hydroxyphenol), and carbon nanotubes were studied by cyclic voltammetry. The modified electrode was used as an electrochemical sensor for catalytic oxidation of dopamine (DA). Differential pulse voltammetry (DPV) of DA by this electrochemical sensor exhibited two linear dynamic ranges with a detection limit (3σ) of 0.42 μM. Also, the selectivity of the prepared electrochemical sensor was checked for determination of DA in the presence of uric acid (UA), folic acid (FA), and acetaminophen (AC). The DPV results indicate that the proposed sensor can be used for simultaneous determination of DA, UA, and FA and also simultaneous determination of DA and AC. Finally, the proposed electrochemical sensor was used for determinations of these substances in real sample.     

Sensitive voltammetric determination of cysteamine using promazine hydrochloride as a mediator and modified multi-wall carbon nanotubes carbon paste electrodes

This paper presents a sensitive electrochemical method for the determination of cysteamine (CA) using promazine hydrochloride-modified multi-wall carbon nanotubes carbon paste electrode (PrH/MWCNTs CPE). Because of the good electrochemical activity of MWCNTs and the acceptable performance of promazine hydrochloride (PrH) as an electrocatalytic mediator, the modified electrode significantly enhanced the sensitivity for the detection of CA in comparison to the bare carbon paste electrode (CPE). All chemical parameters such as pH of solution, concentration of PrH and kinetic parameters of the system were investigated. Linear sweep voltammetric (LSV) method was used to follow the electrocatalytic effect of CA on the current–potential response of PrH. Under optimum conditions, the obtained net peak current ?I _p(I _sample???I _blank) was linear with CA concentrations in two dynamic ranges of 2.0–346.5 μmol l^?1 (?I _p?=?(0.0195?±?0.0043)C _CA?+?(0.7648?±?0.0397) (r ²?=?0.9948)) and 346.5–1,912.5 μmol l^?1 (?I _p?=?(0.0100?±?0.0026)C _CA?+?(3.8981?±?0.0828) (r ²?=?0.9911)) with a detection limit of 0.8 μmol l^?1. Finally, the PrH/MWCNTs CPE was successfully applied for the determination of CA in urine and drug samples with satisfactory results.     

Ionic liquid/multiwall carbon nanotubes paste electrode for square wave voltammetric determination of methyldopa

Ionic liquid/multiwall carbon nanotubes paste electrode has been used as a novel sensor for the efficient quantitative determination of methyldopa (MDOP) in pharmaceutical and biological samples by using square wave voltammetry. This new sensor shows a better electrochemical response with lower over-potential and high sensitivity for MDOP compared with unmodified carbon paste electrode in physiological condition. The electro-oxidation of MDOP occurred in a pH-dependent 2e^? and 2H⁺ process, and the electrode reaction followed a diffusion-controlled pathway. Under the optimum conditions, the voltammetric oxidation peak current of MDOP showed two linear dynamic ranges with a detection limit of 0.1 μM for MDOP. The novel sensor has been found selective and successfully implemented for the determination of MDOP in real samples such as tablet and patient urine.