Neocuproine-extended porphyrin coordination complexes. 2. Spectroscopic properties of the metalloporphyrin derivatives and investigations into the HOMO ordering

The synthesis of a porphyrin compound, 1, containing a 2,9-dimethyl-1,10-phenanthroline moiety that is fused at the beta-pyrrole positions is reported. The absorption spectra of the free-base, copper(II), and zinc(II) derivatives have been studied. On the basis of absorption band intensities, the HOMO of the free base (H21) and its copper and zinc complexes (Cu1 and Zn1) was determined to be of a1u symmetry. Relative to H21, compounds Cul and Znl show enhanced spectral changes upon external metal ion binding. Although the HOMO is the same in all three compounds, the energy gap between the two highest occupied orbitals is greater for Cu1 and Zn1 than it is for the free-base compound. Several metal ions (Ni2+, Cu+, Cu2+, Zn2+, Li+) were examined in their binding to the phenanthrolinic group by measuring the resulting changes in the absorption spectra. It is shown that the observed changes in the absorption spectra are insensitive to the nature of the metal ion coordinated by the phenanthroline moiety. Significant differences in the absorption and emission spectra between Zn1 and [Zn(Zn1)2]2+ clearly demonstrate that the porphyrin pi-system is strongly affected by the binding of metal ions at the fused phenanthrolinic moiety.     

Interfacial charge-transfer absorption: semiclassical treatment

Optically induced charge transfer between adsorbed molecules and a metal electrode was predicted by Hush to lead to new electronic absorption features but has not been experimentally observed. However, Gerischer characterized photocurrents arising from such absorption between adsorbed metal atoms and semiconductor conduction bands. Interfacial charge-transfer absorption (IFCTA) provides information concerning the barriers to charge transfer between molecules and the metal/semiconductor and the magnitude of the electronic coupling and could thus provide a powerful tool for understanding interfacial charge-transfer kinetics. Here we provide a framework for modeling and predicting IFCTA spectra. The key feature of optical charge transfer to or from a band of electronic levels (taken to have a constant density of states and electronic coupling element) is that the absorption probability reaches half intensity at lambda + DeltaG(theta), where lambda and DeltaG(theta) are the reorganization energy and free-energy gap for the optical charge transfer, attains >90% intensity at lambda + DeltaG(theta) + 0.9 square root[4lambdak(B)T], and remains essentially constant until the top (bottom) level of the band is attained. However, when the electronic coupling and transition moment are assumed to be independent of photon energy (Mulliken-Hush model), a peaked, highly asymmetric absorption profile is predicted. We conclude that, in general, the electronic coupling between molecular adsorbates and the metal levels is so small that absorption is not detectable, whereas for semiconductors there may be intense features involving coupling to surface states.     

纳米金属微粒M-Al2O3介孔复合薄膜的光谱特性

用电化学方法合成了纳米金属微粒M(M=Au,Ag,Cu,Co,Ni,CuAg)-Al₂O₃介孔复合薄膜,并研究了其在近紫外至可见光波范围的光谱特性.研究结果表明,复合薄膜的光吸收峰位置与纳米金属微粒和Al₂O₃介孔薄膜的介电常数有关,且随着膜层中纳米金属微粒复合量的增加,大幅度向红外波段移动;通过共沉积的方法形成的合金微粒复合膜也能使吸收边发生移动.同时还发现Ag-Al₂O₃,Au-Al₂O₃介孔复合薄膜分别在波长为360,500nm处存在等离子体共振吸收峰.     

Theoretical study of one- and two-photon absorption properties of octupolar D2d and D3 bipyridyl metal complexes

The molecular equilibrium structures, electronic structures, and one- and two-photon absorption (TPA) properties of C2v (Zn(II), Fe(II) and Cu(I)) dipolar and D2d (Zn(II) and Cu(I)) and D3 (Zn(II)) octupolar metal complexes featuring different functionalized bipyridyl ligands have been studied by the ZINDO-SOS method. The calculated results show that one- and two-photon absorption properties of metal complexes are strongly influenced by the nature of the ligands (donor end groups and pi linkers) and metal ions as well as by the symmetry of the complexes. The length of the pi-conjugated backbone, the Lewis acidity of the metal ions, and the increase of ligand-to-metal ratio result in a substantial enhancement of the TPA cross sections of metal complexes. Substitution of C=N and N=N for C=C plays an important role in altering the maximum TPA wavelengths and the maximum TPA cross sections of metal complexes. Of them, the C=N substituted metal complexes have relatively large TPA cross sections. Replacing styryl with thienylvinyl makes the one-photon absorption wavelength red shift and at the same time leads to a great decrease of the maximum TPA cross sections of metal complexes. The possible reason is discussed. In the range 500-1250 nm, octupolar metal complexes exhibit intense TPAs and therefore are promising candidates for TPA materials.     

Surface chemistry of quantum-sized metal nanoparticles under light illumination

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous chemistry at the surface of the nanoparticles. The optical properties of metal nanoparticles, such as light absorption, also exhibit a strong dependence on their size. It is expected that there will be strong coupling of light absorption and surface chemistry when the metal nanoparticles are small enough. For instance, metal nanoparticles with sizes in the range of 2–10 nm exhibit both surface plasmon resonances, which can efficiently produce high-energy hot electrons near the surface of the nanoparticles under light illumination, and the Coulomb blockade effect, which favors electron transfer from the metal nanoparticles to the surface adsorbates. The synergy of efficient hot electron generation and electron transfer on the surface of small metal nanoparticles leads to double-faced effects: (i) surface (adsorption) chemistry influences optical absorption in the metal nanoparticles, and (ii) optical absorption in the metal nanoparticles promotes (or inhibits) surface adsorption and heterogeneous chemistry. This review article focuses on the discussion of typical quantum phenomena in metal nanoparticles of 2–10 nm in size, which are referred to as “quantum-sized metal nanoparticles”. Both theoretical and experimental examples and results are summarized to highlight the strong correlations between the optical absorption and surface chemistry for quantum-sized metal nanoparticles of various compositions. A comprehensive understanding of these correlations may shed light on achieving high-efficiency photocatalysis and photonics.

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous photochemistry at the surface of the nanoparticles.     

Fabrication of nanorattles with passive shell

This investigation describes the formation of a metal nanorattle with a pure metal shell by varying experimental parameters. The galvanic replacement reaction between silver and chloroauric acid was adopted to prepare hollow metal nanoparticles. This approach is extended to produce nanorattles of Au cores and Au shells by starting with Au(core)Ag(shell) nanoparticles as templates. The effect of temperature on the nanostructure of the final product is also considered. The composition of the shell in nanorattles can be controlled by varying the reaction temperature (to form pure gold or gold-silver alloy, for example). X-ray absorption fine structure spectroscopy is conducted to elucidate the fine structure of these nanoparticles. Partial alloying between the Au core and the Ag shell is observed by extended X-ray absorption fine structure (EXAFS).     

Charge transfer enhances two-photon absorption in transition metal porphyrins

Two-photon absorption processes were investigated in electropolymerized Fe(III), Mn(III), and Co(II) 5,10,15,20-tetrakis-(4-hydroxytetraphenyl)porphyrin films. Degenerate four wave mixing (DFWM) spectroscopy with 100 fs pulses in the near-IR spectral region was used. Metalloporphyrins with strong charge transfer (CT) transitions in the linear absorption spectra also show enhanced two-photon absorption. (Metalloporphyrin two-photon absorption cross section, delta, increases >10 times over that for the metal free porphyrin.) This effect was attributed to a two-photon induced charge transfer between the metal ion's d orbitals and the pi-system of the porphyrin. Correlation of one- and two-photon absorption properties of transition metal porphyrins suggests a new and simple approach to improve organic materials for photonic applications.     

Density functional calculation of the electronic absorption spectrum of Cu+ and Ag+ aqua ions

The UV absorption of aqueous Cu+ and Ag+ has been studied using Time Dependent Density Functional Theory (TDDFT) response techniques. The TDDFT electronic spectrum was computed from finite temperature dynamical trajectories in solution generated using the Density Functional Theory (DFT) based Ab Initio Molecular Dynamics (AIMD) method. The absorption of the two ions is shown to arise from similar excitation mechanisms, namely transitions from d orbitals localized on the metal center to a rather delocalized state originating from hybridization of the metal s orbital to the conduction band edge of the solvent. The ions differ in the way the spectral profile builds up as a consequence of solvent thermal motion. The Cu+ absorption is widely modulated, both in transition energies and intensities by fluctuations in the coordination environment which is characterized by the formation of strong coordination bonds to two water molecules in an approximately linear geometry. Though, on average, absorption intensities are typical of symmetry forbidden transitions of metal ions in the solid state, occasionally very short (<100 fs) bursts in intensity are observed, associated with anomalous Cu-H interactions. Absorption by the Ag+ complex is in comparison relatively stable in time, and can be interpreted in terms of the energy splitting of the metal 4d manifold in an average crystal field corresponding to a fourfold coordination in a distorted tetrahedral arrangement. Whereas the spectral profile of the Ag+ aqua ion is in good agreement with experiment, the overall position of the band is underestimated by 2 eV in the BLYP approximation to DFT. The discrepancy with experiment is reduced to 1.3 eV when a hybrid functional (PBE0) is used. The remaining inaccuracy of TDDFT in this situation is related to the delocalized character of the target state in d-->s transitions.     

Utilizing photocurrent transients for dithiolene-based photodetection: stepwise improvements at communications relevant wavelengths

Photodetection based on bis-(4-dimethylaminodithiobenzil)-Ni(II) (BDN), a representative and well-studied metal dithiolene that shows strong absorption in the near-infrared region of the electromagnetic spectrum, has been investigated. By adopting a metal/insulator/semiconductor/metal (MISM) structure, the peak photocurrent response to an oscillating light chain is increased by up to 50 times, compared to devices without an insulating layer. The transient form of the MISM photoresponse, while unsuitable for steady-state photodetection, can be used to detect periodic light signals of frequencies up to 1 MHz, and is thus applicable for optical communication. Further improvements have been realized by nanostructuring carbon black into the dithiolene layer, improving charge collection, and yielding detectivity of up to 1.6 × 10(11) Jones at wavelengths beyond the scope of silicon photodiodes. Such an architecture may allow the favorable absorption properties of other such metal dithiolenes to be harnessed, where their low charge carrier mobilities and short excitation lifetimes have previously limited their applicability to this field.     

Structure and properties of a series of 2-cinnamoyl-1,3-indandiones and their metal complexes

A series of seven 2-cinnamoyl-1,3-indandiones and their metal(II) complexes were synthesized and characterized by means of spectroscopic (IR, NMR, electron absorption and emission spectroscopy) and/or single-crystal X-ray diffraction methods. The optical spectra of the organic compounds show very strong absorption in the visible region and weak fluorescence with moderate to strong Stokes shift. The effect of concentration, water addition and metal ion complexation on the optical properties was also studied. In search of potential practical application, the complexation of 2-cinnamoyl-1,3-indandiones with metal(II) ions was investigated. A series of non-charged complexes with Cu(II), Cd(II), Zn(II), Co(II) and Ni(II) was isolated and analyzed by elemental analyses and IR. Most of the complexes show presence of water molecules, most probably coordinated to the metal ion, thus forming octahedral geometry. For the paramagnetic Cu(II) complexes a distorted, flattened tetrahedral structure is proposed, basing on the EPR data. The optical properties of the metal complexes, however, do not differ appreciably from those of the free ligands.     

Surface enhanced infrared absorption spectroscopy (SEIRA) using external reflection on low-cost substrates

A novel approach for spectroscopic trace analysis is introduced by combining surface enhanced infrared absorption (SEIRA) spectroscopy with external reflection techniques on disposable inexpensive substrates. SEIRA-active surfaces produced by electrochemical deposition of silver on smooth metal surfaces and glass improve the sensitivity of IR reflection measurements significantly since the infrared absorption of organic substances such as p-nitrobenzoic acid is considerably increased in the vicinity of rough noble metal surfaces. The enhancement properties of thus prepared substrates are characterized and compared using IR-spectroscopy. These low-cost substrates used in single- and multiple external reflection arrangements, respectively, yield a significant increase of the detection level compared to conventional reflection absorption infrared spectroscopy (RAIRS) up to one order of magnitude. Hence, a notable step towards a wide-spread application of SEIRA in routine IR reflection analysis is presented.     

Surface chemistry: a non-negligible parameter in determining optical properties of small colloidal metal nanoparticles

Surface chemistry can become pronounced in determining the optical properties of colloidal metal nanoparticles as the nanoparticles become so small (diameters <20 nm) that the surface atoms, which can undergo chemical interactions with the environment, represent a significant fraction of the total number of atoms although this effect is often ignored. For instance, formation of chemical bonds between surface atoms of small metal nanoparticles and capping molecules that help stabilize the nanoparticles can reduce the density of conduction band electrons in the surface layer of metal atoms. This reduced electron density consequently influences the frequency-dependent dielectric constant of the metal atoms in the surface layer and, for sufficiently high surface to volume ratios, the overall surface plasmon resonance (SPR) absorption spectrum. The important role of surface chemistry is highlighted here by carefully analyzing the classical Mie theory and a multi-layer model is presented to produce more accurate predictions by considering the chemically reduced density of conduction band electrons in the outer shell of metal atoms in nanoparticles. Calculated absorption spectra of small Ag nanoparticles quantitatively agree with the experimental results for our monodispersed Ag nanoparticles synthesized via a well-defined chemical reduction process, revealing an exceptional size-dependence of absorption peak positions: the peaks first blue-shift followed by a turnover and a dramatic red-shift as the particle size decreases. A comprehensive understanding of the relationship between surface chemistry and optical properties is beneficial to exploit new applications of small colloidal metal nanoparticles, such as colorimetric sensing, electrochromic devices, and surface enhanced spectroscopies.     

Joint spectroscopic and theoretical investigations of transition metal complexes involving non-innocent ligands

A series of transition metal complexes involving non-innocent o-dithiolene and o-phenylenediamine ligands has been characterized in detail by various spectroscopic methods like magnetic circular dichroism (MCD), absorption (abs), resonance Raman (rR), electron paramagnetic resonance (EPR), and sulfur K-edge X-ray absorption spectroscopies. A computational model for the electronic structure of the complexes is then proposed based on the density functional theory (DFT) or ab-initio methods, which can successfully account for the observed trends in the experimental spectra (MCD, rR, and abs) of the complexes. Based on these studies, the innocent vs non-innocent nature of the ligands in a given transition metal complex is found to be dependent on the position of the central metal ion in the periodic table, its effective nuclear charge in interplay with relativistic effects.     

Fluorescent chemosensors for metal ions based on 3-(2-benzoxazol-5-yl)alanine skeleton

The ability of new chelate ligands, benzoxazol-5-yl-alanine derivatives substituted in position 2 by heteroaromatic substituent, to form complexes with selected metal ions in acetonitrile are studied by means of absorption and steady-state and time-resolved fluorescence spectroscopy. Among the ligands studied, only azaaromatic derivatives form stable complexes with transition metal ions in the ground state. Their absorption bands are bathochromically shifted enabling to use those ligands as ratiometric sensors. The fluorescence of each ligand is quenched by metal ions, however, in the presence of Cd(II) and Zn(II) ions a new red shifted emission band is observed.      

Biochemical applications of surface-enhanced infrared absorption spectroscopy

An overview is presented on the application of surface-enhanced infrared absorption (SEIRA) spectroscopy to biochemical problems. Use of SEIRA results in high surface sensitivity by enhancing the signal of the adsorbed molecule by approximately two orders of magnitude and has the potential to enable new studies, from fundamental aspects to applied sciences. This report surveys studies of DNA and nucleic acid adsorption to gold surfaces, development of immunoassays, electron transfer between metal electrodes and proteins, and protein–protein interactions. Because signal enhancement in SEIRA uses surface properties of the nano-structured metal, the biomaterial must be tethered to the metal without hampering its functionality. Because many biochemical reactions proceed vectorially, their functionality depends on proper orientation of the biomaterial. Thus, surface-modification techniques are addressed that enable control of the proper orientation of proteins on the metal surface. Figure Surface enhanced infrared absorption spectroscopy (SEIRAS) on the studies of tethered protein monolayer (cytochrome c oxidase and cytochrome c) on gold substrate (left), and its potential induced surface enhanced infrared difference absorption (SEIDA) spectrum     

Modifying infrared scattering effects of single yeast cells with plasmonic metal mesh

The scattering effects in the infrared (IR) spectra of single, isolated bread yeast cells (Saccharomyces cerevisiae) on a ZnSe substrate and in metal microchannels have been probed by Fourier transform infrared imaging microspectroscopy. Absolute extinction [(3.4±0.6)×10(-7) cm(2) at 3178 cm(-1)], scattering, and absorption cross sections for a single yeast cell and a vibrational absorption spectrum have been determined by comparing it to the scattering properties of single, isolated, latex microspheres (polystyrene, 5.0 μm in diameter) on ZnSe, which are well modeled by the Mie scattering theory. Single yeast cells were then placed into the holes of the IR plasmonic mesh, i.e., metal films with arrays of subwavelength holes, yielding "scatter-free" IR absorption spectra, which have undistorted vibrational lineshapes and a rising generic IR absorption baseline. Absolute extinction, scattering, and absorption spectral profiles were determined for a single, ellipsoidal yeast cell to characterize the interplay of these effects.     

Surface enhanced infrared absorption spectroscopy (SEIRA) using external reflection on low-cost substrates

A novel approach for spectroscopic trace analysis is introduced by combining surface enhanced infrared absorption (SEIRA) spectroscopy with external reflection techniques on disposable inexpensive substrates. SEIRA-active surfaces produced by electrochemical deposition of silver on smooth metal surfaces and glass improve the sensitivity of IR reflection measurements significantly since the infrared absorption of organic substances such as p-nitrobenzoic acid is considerably increased in the vicinity of rough noble metal surfaces. The enhancement properties of thus prepared substrates are characterized and compared using IR-spectroscopy. These low-cost substrates used in single- and multiple external reflection arrangements, respectively, yield a significant increase of the detection level compared to conventional reflection absorption infrared spectroscopy (RAIRS) up to one order of magnitude. Hence, a notable step towards a wide-spread application of SEIRA in routine IR reflection analysis is presented. Received: 20 January 1998 / Revised: 3 June 1998 / Accepted: 5 June 1998     

Study of anomalous infrared properties of nanomaterials through effective medium theory

Effective medium theory is introduced into a three-layer model to study the anomalous IR properties of nanostructured Pt films. A composite system is set up for the nanostructured film together with adsorbates and water around it. The anomalous IR spectral features, which exhibit a transition from enhanced (or normal) IR absorption to Fano-type bipolar line shape and, finally, to enhanced anomalous IR absorption (the abnormal infrared effects) along with the change in structure and size of nanomaterials, as observed through experiments for CO molecule adsorption, are elucidated by an increase in the volume fraction of metal in the composite system and the effective thickness of the composite system. The theoretical simulation results illustrate that the spectral line shape of IR absorption depends strongly on the volume fraction of metal, while the intensity of the IR band is directly proportional to the effective thickness. This study has revealed, through a physical optical aspect of interaction of CO molecules with nanostructured metal films, one of the possible origins of anomalous IR properties and has shed light on interpreting the peculiar properties of nanomaterials.     

Metal induced enhancement of fluorescence and modulation of two-photon absorption cross-section with a donor-acceptor-acceptor-donor receptor

A metal ion sensing fluorophore L that exhibits a large two-photon absorption cross-section has been synthesized in good yields. The influences of different metal ion inputs, on the one- and two-photon spectroscopic properties of L, have been investigated. The ligand itself does not show any fluorescence although in presence of a metal ion like Zn(II), Cd(II), Mg(II) or Ca(II), a ∼25 time enhancement of fluorescence is observed. The ligand with symmetrical “donor-acceptor-acceptor-donor” characteristics exhibits a large two-photon absorption cross-section measured by femtosecond open-aperture Z-scan technique at 880 nm. However, presence of any of the above metal ions lowers its two-photon absorption cross-section (δ) to different extents at 880 nm. Theoretical calculation carried out in DFT formalism on the ligand and its Zn(II) complex corroborate experimental results.     

On the electronic states of macrocycles of the extended porphyrin family and their coordination compounds

The electronic absorption spectra of Ni, Zn and Mg hemiporphyrazine derivatives are presented and discussed together with theoretical results obtained by INDO/S computations. The absorption spectra of all the metal derivatives show marked red shifts of the lowest energy absorption bands with respect to those of the metal free hemiporphyrazine. The possible explanation that in metal derivatives low lying excited states with a fully conjugated π electron system are present is supported by theoretical computations.