配体对CdTe量子点与BSA的选择性相互作用的影响

以巯基乙酸(TGA)、巯基丙酸(MPA)、巯基甘油(TG)、L-半胱氨酸(L-cys)和谷胱甘肽(GSH)等5种巯基分子为稳定剂, 水相合成了5种CdTe量子点. 以牛血清白蛋白(BSA)作为靶分子, 通过吸收光谱、荧光光谱和时间分辨荧光动力学等手段研究了各种配体分子稳定的CdTe量子点与BSA的直接相互作用. 结果表明, 5种量子点均能有效猝灭BSA的荧光, 其猝灭程度按配体次序为GSH>L-cys>TGA>TG>MPA; 而BSA对不同配体稳定的CdTe量子点的荧光光谱的影响则具有明显的选择性. BSA对TGA-CdTe和MPA-CdTe量子点的荧光先敏化增强而后猝灭下降; L-cys分子由于同时具有氨基和羧基而与BSA的相互作用较强, 因此BSA能显著猝灭L-cys-CdTe量子点的荧光; 而BSA对TG-CdTe量子点的荧光猝灭程度较小; GSH分子的空间效应使GSH-CdTe量子点的荧光被BSA猝灭的程度最小. 吸收光谱和时间分辨荧光动力学研究表明, 5种量子点与BSA之间的相互作用均为静态过程. 探讨了量子点的配体分子结构与蛋白质的相互作用机理.     

CdTe量子点与蛋白质相互作用的荧光猝灭效应

本文在水热法合成水溶性CdTe及核壳结构CdTe/CdS量子点的基础上,分别研究了细胞色素c对CdTe量子点及CdTe/CdS核壳量子点荧光的猝灭效应和CdTe量子点对牛血清白蛋白荧光的猝灭效应,并阐述了猝灭机理。结果显示,细胞色素c对CdTe量子点的荧光猝灭效应具有一定的粒径依赖性,粒径越小,猝灭效应越强;细胞色素c对CdTe/CdS核壳量子点的猝灭效应比对CdTe量子点的更强,揭示了受激电子的表面传递机理。CdTe量子点通过松散牛血清白蛋白的螺旋结构而猝灭其荧光。     

Studying the interaction between CdTe quantum dots and Nile blue by absorption,fluorescence and resonance Rayleigh scattering spectra

Thioglycolic acid (TGA) capped CdTe quantum dots (QDs) with the diameter of 2–3 nm were synthesized. The interaction between CdTe QDs and Nile blue (NB) was investigated by ultraviolet–visible (UV–vis) absorption, resonance Rayleigh scattering (RRS) and fluorescence spectroscopy. UV–vis absorption spectrum of CdTe QDs and NB obviously changed, showing that CdTe QDs could associate with NB to form a new complex. At pH 6.8, NB effectively quenched the fluorescence of CdTe QDs. It was proved that the fluorescence quenching of CdTe QDs by NB was mainly result of the formation of CdTe QDs–NB complex, electrostatic attraction and hydrophobic forces played a major role in stabilizing the complex. The binding molar ratio of CdTe QDs and NB was 5:1 by a mole-ratio method. The interaction between CdTe QDs and NB lead to the remarkable enhancement of RRS and the enchantments were in proportional to the concentration of NB in a certain range. The mechanism of the interaction between CdTe QDs and NB, reasons for the enhancement of RRS intensity were also discussed. The obtained results suggested the more satisfactory mechanism for the interaction between CdTe QDs and NB.     

水热法合成巯基乙胺稳定的CdTe量子点

提出了一种以水热法合成巯基乙胺稳定的CdTe量子点的简单制备路线. 在优化的反应条件下, 产物的荧光量子效率最高达到19.7%, 接近已报道的其它方法的2倍. 考察了反应条件对产物的荧光性能的影响及产物在不同pH溶液中的稳定性.     

3-巯基异丁酸衍生物对碲化镉量子点水相合成的影响

为探索适宜制备粒径分布窄、荧光量子产率高、发光区域在红光至近红外光区段的量子点的巯基酸的条件, 我们研究了三类3-巯基异丁酸(MIBA)衍生物在以亚碲酸钠为碲源的水相法水热制备CdTe量子点中的影响. 这三类衍生物包括设计合成的主链亲水性衍生物3-巯基异丁酰甘氨酸(MIBGly)、3-巯基异丁酰-3-氨基丙酸(MIBAPA)和3-巯基异丁酰天冬氨酸(MIBAsp), 支链亲水性衍生物N-乙酰基半胱氨酸(ACys)和支链疏水性衍生物3-巯基-2-甲基丁酸(MMBA)和3-巯基-2,2-二甲基丙酸(MDMPA). 以这三类MIBA 衍生物为修饰剂时,CdTe量子点均能够保持MIBA体系较窄的荧光半峰宽. 采用亲水性的MIBA衍生物(MIBGly、MIBAPA、MIBAsp和ACys)比采用疏水性的MIBA衍生物(MMBA和MDMPA)更有利于制备发射波长较长的量子点. 采用支链亲水性的MIBA衍生物((ACys)比采用主链亲水性的MIBA衍生物(MIBGly、MIBAPA和MIBAsp)更容易获得高荧光量子产率的量子点.     

Highly efficient size separation of CdTe quantum dots by capillary gel electrophoresis using polymer solution as sieving medium

In this paper, we present a new method for highly efficient size separation of water-soluble CdTe quantum dots (QDs) based on CGE using polymer solution as sieving medium. CdTe QDs were synthesized in aqueous phase by a chemical route with mercaptopropionic acid as a ligand. In the alkaline solution, CdTe QDs possess negative charges and migrate to the anode in the electric field. In linear polyacrylamide sieving medium, the migration time of CdTe QDs was increased with the size of CdTe QDs. The effects of some factors, such as types, concentrations, and pH of sieving media, on the separation of CdTe QDs were investigated systematically. Highly efficient separation of CdTe QDs was obtained in linear polyacrylamide sieving medium, and collection of fractions was automatically accomplished by CGE technique. Our preliminary results show that CGE technique is an efficient tool for characterization and size-dependent separation of water-soluble nanoparticles. In addition, the fraction collection in CGE may be useful in certain special applications such as fabrication of nanodevices in the future.     

水溶性的高荧光CdTe/CdSeⅡ型核壳量子点的合成与表征

用L-半胱氨酸(L-cysteine)作为稳定剂,以制备的CdTe量子点为核模板,水相合成了具有近红外发光的Ⅱ型核壳CdTe/CdSe半导体量子点。实验考察了合成温度,核模板的尺寸和组分比等因素对合成高质量的CdTe/CdSe量子点的影响。用紫外-可见吸收和荧光光谱研究了合成的量子点的光学性质。在优化的合成条件下,荧光发射光谱在586～753nm范围连续可调,荧光量子产率高达68%;通过X-射线衍射(XRD),X射线光电子能谱(XPS)和透射电镜(TEM)对合成的Ⅱ型核壳CdTe/CdSe量子点进行了结构和形貌表征。     

不同环境因子作用下水溶性CdTe量子点的生长动力学研究

以硫普罗宁为稳定剂,水热法制备了水溶性CdTe量子点,系统研究了回流时间、反应物配比、pH值、反应温度和电解质种类等环境因子对量子点生长动力学及光物理性质的影响。结果表明,溶液的pH值及反应物配比对CdTe量子点的光物理性质均有重要影响。优化条件后,回流5 h可得到发射峰位于550 nm的CdTe量子点,其荧光量子效率高达52%;在氯化钠作用下,量子点生长加快,即高浓度氯化钠会减弱溶液中粒子间静电排斥,促进离子扩散,有利于量子点的生长;添加苯磺酸钠会抑制量子点的生长,有利于制备高荧光量子效率的小尺寸CdTe量子点。     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

表面修饰CdTe量子点的合成及其光学特性

在水相中合成高发光性能的CdTe量子点,研究以巯基乙酸(TGA)为稳定剂对CdTe表面进行修饰,制备在水中分散性良好的纳米晶,通过对CdTe量子点合成反应条件的摸索,掌握了其合成的反应规律.同时用紫外分光光度计、荧光分光光度计和透射电子显微镜对其进行了表征.结果表明,回流时间、n(Cd²⁺):n(HTe^-)、反应物浓度、TGA用量、反应体系pH值,对纳米晶的光学性质具有显著影响.回流2 h制得的CdTe纳米粒子直径约为5 nm,其发射峰窄且对称,表现出良好稳定的光学性质.     

基于水溶性CdTe量子点-绿原酸-血管紧张素Ⅰ 相互作用的荧光可逆调控

在水相中合成了巯基丙酸(MPA)包覆的CdTe量子点(QDs), 采用透射电子显微镜和原子力显微镜对其进行表征. 利用荧光光谱、紫外-可见吸收光谱和红外光谱研究了CdTe QDs与绿原酸(CHA)的相互作用. 结果表明, CHA可显著猝灭CdTe QDs的荧光, 在一定的浓度范围内, 荧光猝灭值与CHA的浓度呈现一定的线性关系. 推断其主要猝灭机理为动态猝灭, 并实现了荧光光谱法测定CHA. 向CdTe QDs-CHA体系中加入血管紧张素Ⅰ(AngⅠ)后, CdTe QDs荧光在一定浓度范围内逐渐恢复, 从而实现了CdTe QDs的荧光可逆调控. CdTe QDs荧光的猝灭与恢复过程对于荧光传感的设计以及荧光可逆调控机理的研究具有指导意义.     

不同环境因素对水热法合成碲化镉量子点的影响

对比了不同巯基稳定剂和前体浓度对水热环境CdTe量子点的生长过程和光物理性质的影响。结果表明,巯基丙酸与镉前体的结合能力较强,一定程度上减小了前体溶液中镉的浓度,故CdTe量子点生长速率较慢;空间位阻较大的硫普罗宁与镉前体的结合相对较弱,因此导致CdTe量子点生长较快。巯基丙酸有利于制备发光波长较短的高荧光强度CdTe 量子点,而硫普罗宁有利于制备发光波长较长的高荧光强度CdTe量子点。前体浓度对CdTe量子点的生长速率和光物理性质的影响不明显。在上述实验结果基础上,考察了水溶性乙酸钠和聚丙烯酸钠电解质对水热环境中CdTe量子点的生长过程和光物理性质的影响。结果表明,添加乙酸钠后可提高CdTe量子点的生长速率,进而导致CdTe量子点的表面重构和钝化能力下降,使荧光强度降低;聚丙烯酸钠对镉单体独特的固定作用导致CdTe量子点生长缓慢,尺寸集中化受限,钝化能力降低,使荧光强度下降更加明显。     

颜色可调的高荧光CdTe量子点的水相合成

以亚碲酸钠为碲源,硼氢化钠为还原剂,一步合成了巯基丁二酸(MSA)稳定的CdTe量子点.研究了反应液pH值、镉与碲的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdTe量子点体系荧光量子产率的影响,并用荧光光谱、X射线粉末衍射及透射电子显微镜等对其进行了表征.结果表明,CdTe量子点具有闪锌矿结构,形貌呈球状;在pH=1...     

Study the damage of DNA molecules induced by three kinds of aqueous nanoparticles

In this paper, the interaction of DNA molecules with aqueous CdTe quantum dots (CdTe QDs), CdTe/SiO₂ composite nanoparticles (CdTe/SiO₂ NPs), and Mn-doped ZnSe quantum dots (Mn:ZnSe d-dots) was studied with ethidium bromide as a probe. The purpose of this work was to study the damage of DNA molecules induced by these three kinds of water-soluble nanoparticles. It was found that ionic strength, pH value and UV irradiation influenced the PL emission properties of CdTe QDs, CdTe/SiO₂ NPs and Mn:ZnSe d-dots, and also influenced the interaction of DNA molecules with them. Among the three kinds of nanoparticles, DNA molecules were most easily damaged by CdTe QDs whether in the dark or under UV irradiation. The CdTe/SiO₂ NPs led to much less DNA damage when compared with CdTe QDs, as a silica overcoating layer could isolate the QDs from the external environment. Mn:ZnSe d-dots as a new class of non-cadmium doped QDs demonstrated almost no damage for DNA molecules, which have great potentials as fluorescent labels in the applications of biomedical assays, imaging of cells and tissues, even in vivo investigations.     

硫脲修饰法制备高发光性能CdTe量子点

通过巯基水解制备了具有优异荧光特性的碲化镉量子点. 详细研究前驱体镉离子与巯基丙酸(MPA)摩尔比、镉离子浓度等制备条件对大尺寸、高量子产率的亲水性碲化镉量子点光学性能的影响. 在不同的水热生长时间下, 可制备出荧光发射峰位于485-660 nm范围内的不同尺寸的碲化镉水溶性量子点, 荧光发射峰半高宽控制在40-75 nm之间, 量子点的最高量子产率(QY)达到了45%. 并利用硫脲缓慢水解和光解释放自由硫离子, 修饰碲化镉表面, 检测修饰后的量子点在12天内光学性能的变化情况. 通过考察硫脲用量对量子点修饰效果, 发现当n(CdTe)/n(thiourea)=1:4(量子点浓度以镉离子浓度计)时, 硫脲对发射峰为505 nm的碲化镉量子点修饰效果最为理想, 量子点荧光强度加强了5倍, 量子产率达到68.3%.     

CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

CdTe量子点与罗丹明6G间的荧光共振能量转移机理研究

本文在合成水溶性巯基乙酸修饰的CdTe量子点的基础上,研究了CdTe量子点与罗丹明6G之间的荧光共振能量转移.实验结果表明:构建的CdTe量子点(供体)-罗丹明6G(受体)荧光共振能量转移体系在磷酸盐缓冲溶液中有较好的转移效果.当磷酸缓冲溶液pH值为7.4,NaCl浓度为1.0 mol/L时,构建的CdTe量子点-罗丹...     

室温水相合成CdTe/CdS核/壳结构量子点

开发了一种以聚乙烯吡咯烷酮为分散剂和稳定剂经条件温和的室温水相合成光谱可调的水溶性CdTe/CdS核/壳结构量子点的方法:向新鲜制备的CdTe量子点溶液中加入硫源,继续反应即可生成CdS壳层,通过控制硫源的浓度即可控制CdS壳层厚度,从而调节光谱性质和增强稳定性.采用XRD、TEM、HRTEM、荧光光谱以及紫外-可见光...     

Sized dependence and microstructural defects on highly photocatalytic activity based on multisized CdTe quantum dots sensitized TiO2

A series of sensitized TiO₂ NPs with enhanced photocatalytic activity were prepared by different sized CdTe QDs with bifunctional ligand interlinking. The microstructures and morphologies of four different sizes of CdTe QDs and CdTe QDs sensitized TiO₂ NPs were characterized systematically by fluorescence spectroscopy, UV-Vis diffuse reflectance spectroscopy, FT-IR, XRD, XPS, FE-SEM, HRTEM, BET, and positron annihilation lifetime spectroscopy (PALS). The photocatalytic performance of CdTe QDs sensitized TiO₂ NPs was investigated by degrading MO and MB in aqueous solution under visible light irradiation. The process of degradation complied with the first-order reaction kinetics. Four different sized CdTe QDs sensitized TiO₂ exhibited higher photocatalytic activities than TiO₂. Particularly, yellow emitting CdTe QDs (3.28 nm) sensitized TiO₂ (CT_1.5) showed the best photocatalytic performance, which may be attributed to the optimal NP size, and has a moderate light absorption and electron injection. The effect of microstructural defects on CdTe QDs sensitized TiO₂ has been confirmed effectively by positron lifetime measurements.