Comparison of Multi‐walled Carbon Nanotubes and Poly(3‐octylthiophene) as Ion‐to‐Electron Transducers in All‐Solid‐State Potassium Ion‐Selective Electrodes

Multi‐walled carbon nanotubes (MWCNTs) were compared with poly(3‐octylthiophene) (POT) as ion‐to‐electron transducer in all‐solid‐state potassium ion‐selective electrodes with valinomycin‐based ion‐selective membranes. MWCNTs and POT were mixed with the other components of the potassium ion‐selective membrane cocktail (valinomycin, KTpClPB, o‐NPOE, PVC, THF) which was then applied on a glassy carbon (GC) substrate to prepare single‐piece ion‐selective electrodes (SPISEs). Results from potentiometric and impedance measurements showed that the MWCNT‐based electrodes have a more reproducuible standard potential and a lower overall impedance than the electrodes based on POT. Both types of electrodes showed similar sensitivity to potassium ions and no redox sensitivity.     

All‐Solid‐State Ion Selective and All‐Solid‐State Reference Electrodes

This paper is aiming to give a brief overview of recent research in the field of all‐solid‐state, internal solution free, ion‐selective electrodes and reference electrodes, employing conducting polymers or nano‐/microstructures as solid contacts beneath the polymeric, ion‐selective or reference membranes. The emphasis is on papers published in the last five years (after 2006). According to the papers published, poly(3‐octylthiophene) conducting polymer transducers offer highly reliable sensors for various applications, involving demanding analytical approaches and miniature sensors. On the other hand, the search for alternative materials continues: the sensors obtained by placing nano‐/microstructures (conducting polymers but also other materials, like, e.g., carbon nanotubes) underneath the receptor membrane are intensively tested. The recent years have also shown how useful the application of advanced instrumental methods is for the investigation of processes occurring within all‐solid‐state ion‐selective electrodes.     

Voltammetric Properties of All‐solid State Ion‐selective Electrodes with Multiwalled Carbon Nanotubes‐poly(3‐octylthiophene‐2,5‐diyl) Nanocomposite Transducer

Voltammetric response of an all‐solid‐state ion‐selective electrode was studied on example of potassium‐selective sensor with poly(vinyl chloride) based membrane and nanocomposite transducer containing poly(3‐octylthiophene‐2,5‐diyl) and multiwalled carbon nanotubes. Factors limiting the rate of the electrochemical process and the response were discussed. The challenge in voltammetric applications of ion‐selective electrodes is thickness of the plastic membrane. It was found that although a relatively thick ion‐selective membrane was applied, as typically used in potentiometric studies, the position of the reduction peak, corresponding to potassium ions incorporation, was dependent on ions concentration in a Nernstian manner. This opens possibility of deviation from the paradigm of ultrathin membranes in voltammetric applications, thus potentially extending the sensors lifetime. The high resistance of the membrane did not affect the voltammetric characteristics, because the resistance was independent of ions concentration in solution. On the other hand, high resistance results in charge trapping effect in the solid contact material, leading to advantageous retention of the oxidized‐conducting state of the solid contact, independently of the applied electrode potential.     

Influence of Poly(3‐octylthiophene) on the Water Transport Through Methacrylic‐Acrylic Based Polymer Membranes

Accumulation of water in ion‐selective membranes, can lead to inconsistent potentiometric responses with solid‐contact ion‐selective electrode (SC‐ISE) formats, and hence it is essential to restrain their water uptake. We have used FTIR‐ATR spectroscopy to study how the water uptake is influenced by the intermixing of a poly(3‐octylthiophene) (POT) SC and a poly(methyl methacrylate):poly(n‐decyl methacrylate) (PMMA:PDMA) based polymeric membrane matrix, the only SC‐ISE system for which direct evidence was provided on the aqueous layer elimination. Numerical simulations of the FTIR‐ATR spectra of 1 or 5 wt% POT containing PMMA:PDMA membranes showed that the addition of 5 wt% POT to the membrane lowered the equilibrium water uptake, whereas the diffusion coefficients of water in the membrane were found to be less affected. Consequently, POT is beneficial for preventing the formation of detrimental water layers in the SC‐ISE structure.     

基于酞菁铜衍生物为载体的电极对水杨酸根的选择性电位响应

本文以2,9,16,23-四硝基酞菁铜(II) (Cu(II)TNPc) 和2,9,16,23-四氨基酞菁铜(II) (Cu(II)TAPc) 为载体制备PVC聚合膜,构建了水杨酸根选择性电极,并探讨了该电极的选择性响应性能。研究了增塑剂的性质、载体的含量及阴、阳离子添加剂对电极电位响应的影响。结果表明,基于Cu(II)TNPc为载体的PVC膜电极对水杨酸根 (Sal－) 呈现出优先选择性电位响应。具有最佳电位响应的电极的膜组成是：(w/w) 3.0% Cu(II)TNPc,67.0% o-NPOE,29.5% PVC和0.5% NaTPB。基于该组成的电极的线性响应范围为1.0×10－1－9.0×10－7 mol·L－1,检测下限为7.2×10－7 mol·L-1,斜率为－59.8±0.5 mV/decade;其响应快速,稳定性好,适宜的pH范围是3.0－7.0。并成功运用于了实际样品中水杨酸含量的测定,获得令人满意的结果。     

Highly Selective All‐Plastic,Disposable, Cu2+‐Selective Electrodes

Conducting polymers (CP) remain a promising material to construct stable potential all‐solid‐state ion‐selective potentiometric electrodes. The unique properties of poly(3,4‐ethylenedioxythiophene) doped with poly(4‐styrenesulfonate) ions, PEDOT‐PSS: high CP stability and affinity of doping anions towards Cu²⁺ ions, make it highly attractive for construction of all‐solid‐state copper(II)‐selective electrodes with outstanding selectivity. The additional benefits can arise from solution processability of commercially available PEDOT‐PSS system. This material was highly promising for a new sensor arrangement, i.e. to obtain disposable, planar and flexible all‐plastic Cu²⁺‐selective electrodes. These sensors can be obtained by casting a commercially available dispersion of PEDOT‐PSS (Baytron P) on a plastic, non‐conducting support material. The CP being both electrical lead and ion‐to‐electron transducer, was covered with plastic, solvent polymeric Cu²⁺ selective membrane. This extremely simple arrangement, after conditioning in dilute Cu²⁺ solution, was characterized with linear Nernstian responses within the activities range from: 0.1 to 10^?4 M, followed by super‐Nernstian responses for lower activities. The latter result points to effective elimination of primary ions leakage from the plastic membrane / transducer phase and has resulted in significantly improved selectivities. Obtained log K values were equal to ?7.6 for Co²⁺, ?7.4 for Zn²⁺, ?7.2 for Ca²⁺ and ?6.8 for Na⁺, respectively.     

Iodide‐Selective Electrode Based on Copper Phthalocyanine

Copper phthalocyanine was used as ion carrier for preparing polymeric membrane selective sensor for detection of iodide. The electrode was prepared by incorporating the ionophore into plasticized poly(vinyl chloride) (PVC) membrane, coated on the surface of graphite electrode. This novel electrode shows high selectivity for iodide with respect to many common inorganic and organic anions. The effects of membrane composition, pH and the influence of lipophilic cationic and anionic additives and also nature of plasticizer on the response characteristics of the electrode were investigated. A calibration plot with near‐Nernestian slope for iodide was observed over a wide linear range of five decades of concentration (5×10^?6?1×10^?1 M). The electrode has a fast response time, and micro‐molar detection limit (ca. 1×10^?6 M iodide) and could be used over a wide pH range of 3.0–8.0. Application of the electrode to the potentiometric titration of iodide ion with silver nitrate is reported. This sensor is used for determination of the minute amounts of iodide in lake water samples.     

Solid Contact Nitrate Ion‐Selective Electrode Based on Ionic Liquid with Stable and Reproducible Potential

A simple, fast and cheap method of preparation of solid contact nitrate ion‐selective electrode is proposed. The electrode membrane phase consist of only three components: PVC, plasticizer and ionic liquid (IL).The ionic liquid trihexyltetradecylphosphonium chloride is used in triple function as ionophore, as lipophilic ionic component in order to reduce membrane resistance, and as transducer media in order to stabilize the potential of internal Ag/AgCl electrode. The electrical properties of the membrane were studied by electrochemical impedance spectroscopy and the influence of the interfacial water film was evaluated by potentiometric water layer test.     

Stability Enhancement of All‐Solid‐State H+ ISEs with Cross‐Linked Silicon‐Urethane Matrices

An all‐solid‐state hydrogen‐ion‐selective electrode (ASHISE) was fabricated using the polymer hybrid membrane. Polymer membranes composed of Tecoflex polyurethane (TPU), polyvinyl chloride (PVC), silicon rubber (SR), and additives (KTpClPB, DOA, and TDDA) were cast on a carbon rod. The TPU/SR hybrid membrane exhibited a longer lifetime and a higher sensitivity in the sensing of the H⁺ ion compared to conventional TPU/PVC and PVC/SR hybrid membranes. Moreover, the addition of SiCl₄ to TPU‐based matrices enhanced the potentiometric response and ISE stability, due to the chemical bonding between Si and C?O in urethane, in which the cross‐linking configuration was confirmed by DSC, FT‐IR, and XPS experiments. TPU/SR membranes containing SiCl₄ were rendered more stable and showed a pH response over a wide range (i.e., pH 2–11.5) with the slope of 60±2 mV/pH for more than four months. The ASHISE exhibited a small interfering potential variation in the wide range of the salt concentration (from 1.0×10^?6 M up to 0.1 M). The ASHISE showed a result comparable to a commercial clinical blood analyzer.     

A Highly Selective and Sensitive Barium(II)‐Selective PVC Membrane Based on Dimethyl 1‐Acetyl‐8‐oxo‐2,8‐dihydro‐ 1H‐pyra‐zolo[5,1‐a]isoindole‐2,3‐dicarboxylate

A poly(vinyl chloride)‐based membrane of dimethyl 1‐acetyl‐8‐oxo‐2,8‐dihydro‐1H‐pyra‐zolo[5,1‐a]isoindole‐2,3‐dicarboxylate as a neutral carrier with sodium tetraphenylborate (NaTPB) as an anion excluder and 2‐nitrophenyl octyl ether (NPOE) as plasticizer was prepared and investigated as a Ba(II)‐selective electrode. The electrode exhibits a Nernstian slope of 29.7±0.4 mV per decade over a wide concentration range (1.0×10^?6 to 1.0×10^?1 M) with a detection limit of 7.6×10^?7 M between pH 3.0 and 11.0. The response time of the sensor is about 10 s and it can be used over a period of 2 months without any divergence in potential. The proposed membrane sensor revealed good selectivity for Ba(II) over a wide variety of other metal ions. It was successfully used in direct determination of barium ions in industrial wastewater samples.     

Studies of difurylmethane‐maleic anhydride copolymer as an ion‐responsive membrane for the determination of mono‐, di‐ and tri‐valent cations

The synthesis of the difurylmethane‐maleicanhydride(DFM‐MAH) copolymer was done by reacting difurylmethane with maleic acid followed by hydrolysis with sodium hydroxide to produce the anhydride sodium salt. Construction of a sensor with the copolymer as the ion‐exchanger material was done by mixing the copolymer with poly(vinylchloride), PVC, plastic matrix and dibutylphthalate (DBP) plasticizer in tetrahydrofuran (THF) solvent to form a paste. The paste was coated on a piece of silver wire to produce a coated wire electrode (CWE). The response characteristics of the copolymer‐CWE, in potentiometric analysis, were studied for mono‐, di‐ and tri‐valent cations. All the cations studied showed a near‐Nernstian response for concentrations ranging from 5 x 10⁻⁸ M to 1 x 10⁰M in triethanolamine buffer in aqueous media (0.5 M, pH 10.5). The membrane had a composition of 20:20:60 for the copolymer, PVC and DBP.     

Application of a bio‐based polyester plasticizer modified by hydrosilicon‐hydrogenation reaction in soft PVC films

A kind of bio‐based plasticizer, poly (hexanediol maleic) (MH), was synthesized using 1,6‐hexalene and maleic acid as raw materials, and it was modified by hydrosilicon‐hydrogenation reaction to improve its plasticizing efficiency. The chemical structure and plasticizing performance of MH and its modification product (MHA) were characterized by Fourier‐transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H‐NMR), X‐ray photoelectron spectroscopy (XPS), and Dynamic mechanical analysis (DMA). It was found that the hydrosilicon‐hydrogenation modification effectively improved the plasticizing efficiency of MH, reflecting on the decreased T_g and the increased elongation at break of PVC blends. The migration resistance of PVC blends was tested and analyzed by solubility parameters, which revealed that the migration stabilities of PVC blends were promoted after modification. It was verified that the hydrogen bonding interaction between the C?O group of plasticizers and α‐hydrogen of PVC exhibited in FTIR analysis was the main reason for the improvement of plasticizer performance of MH. Moreover, a new hydrogen bonding formed between Si? O? Si of MHA and the α‐hydrogen of PVC derived from XPS also caused the further improvement of plasticity for MHA.     

Iodide‐Selective Electrodes Based on Bis[N(2‐methyl‐phenyl) 4‐Nitro‐thiobenzamidato]mercury(II) and Bis[N‐phenyl 3,5‐Dinitro‐thiobenzamidato]mercury(II) Carriers

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on recently synthesized mercury complexes including Hg(Nmpntb)₂ and Hg(Npdntb)₂ as new carriers for iodide‐selective electrodes by incorporating the membrane ingredients on the surface of graphite electrodes are reported. The effect of various parameters including the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses toward iodide over a wide concentration range of 7×10^?7 to 0.1 M and 1×10^?6 to 0.1 M, with slopes of 59.6±0.8 and 58.9±0.9 mV per decade of iodide concentration and detection limit of 3×10^?7 M and 7×10^?7 for Hg(Npdntb)₂ and Hg(Nmpntb)₂, respectively, over a wide pH range of 3–11. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show good ability to discriminate iodide over several inorganic and organic anions. The electrodes were successfully applied to direct determination of iodide in synthetic mixture, waste water and drinking water and as indicator electrodes in precipitation titrations.     

Potentiometric sensors for Ag+ based on poly(3-octylthiophene) (POT)

Potentiometric ion sensors were prepared from the conjugated polymer poly(3-octylthiopene) (POT). The influence of additional membrane components, including silver 7,8,9,10,11,12-hexabromocarborane (AgCB₁₁H₆Br₆) and potassium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (KTpFPB) as lipophilic salts, and [2.2.2]p,p,p-cyclophane as silver ionophore, was studied. The membrane components were dissolved in chloroform and membranes were prepared by solution casting on glassy carbon disk electrodes. For comparison, POT-based potentiometric sensors were also prepared by galvanostatic electrosynthesis of POT from the 3-octylthiophene monomer. All the POT-based ion sensors fabricated by solution casting show Nernstian or slightly sub-Nernstian response to Ag⁺, even those based only on POT without any additional membrane components. The potentiometric response of electrochemically polymerized POT depends on the film thickness and the doping anion incorporated in the conducting polymer during polymerization. It is of particular importance that chemically synthesized undoped POT (without any additives) shows a sensitive and selective potentiometric response to Ag⁺ ions although UV-vis results show that POT remains in its undoped form, i.e., POT is not oxidized by Ag⁺. This indicates that undoped POT can exhibit good sensitivity and selectivity to Ag⁺ also in the absence of metallic silver in the polymer film. In this case, the potentiometric response is related to interactions between Ag⁺ and the conjugated polymer backbone. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, 13–16, 2005     

Development of Polymeric Resin Ion‐exchanger Based Chloride Ion‐selective Electrode for Monitoring Chloride Ion in Environmental Water

A chloride ion‐selective electrode (ISE) membrane was developed by using a copolymeric ion‐exchanger resin (trimethyl ethenyl quaternary ammonium chloride polystyrene‐divinylbenzene copolymer resin, TMEQAC PSDVB), the ionophore ({μ‐[4,5‐Dimethyl‐3,6‐bis(dodecyloxy)‐1,2‐phenylene]}bis(mercury chloride), ETH9033), the plasticizer (bis(2‐ethylhexyl) sebacate, DOS), and the membrane substrate (polyvinylchloride, PVC). At 25 °C, the electrode exhibited an ideal Nernstian response of 59.2 mV/decade with the linear calibration concentration range from 1.0 × 10^?4‐1.0 × 10^?2 M (r² = 0.9930). The limit of detection was 2.45 ppm (6.9 × 10^?2 mM) and the measurement response time was less than 10 seconds. The working temperature range of electrode was 10‐45 °C. The working pH range for chloride ion measurement was 2.0‐11.0. Among the various anions examined in this work, only I^?, SCN^?, and MnO₄^? ions show significant interference to the electrode measurement. The chloride ISE can be used at least 72 days. The determination of chloride ion content in three kinds of environmental water sample with the electrode method was accurate (92‐95%) and precise (RSD < 4.4%) and did not show significance difference from the high‐performance liquid chromatography method.     

Response Behavior of Poly(vinyl chloride)‐ and Polyurethane‐Based Ca2+‐Selective Membrane Electrodes with Polypyrrole‐ and Poly(3‐octylthiophene)‐Mediated Internal Solid Contact

The potentiometric response behavior of Ca²⁺‐selective poly(vinyl chloride) (PVC) and polyurethane (PU) membranes with different inner contacts has been compared. Evidence for the formation of a water film between membrane and internal contact and, hence, a less than optimal lower detection limit have been found for membranes directly in contact with bare Au or with polypyrrole generated by electropolymerization in the presence of KCl. A significantly better behavior is shown by membranes with polypyrrole prepared in the presence of potassium hexacyanoferrate. Best performances have been obtained with solvent‐cast poly(3‐octylthiophene) as the internal contacting layer. As compared with the PVC membranes, those with PU had a significantly worse performance throughout.     

Comparative studies of solid‐state synthesized poly(o‐methoxyaniline) and poly (o‐toluidine)

Poly(o‐methoxyaniline) (POMA) and poly(o‐toluidine) (POT) salts doped with different acids (methanesulphonic acid (MeSA), trifluoroacetic acid (TFA), and hydrochloric acid (HCl)) were synthesized by using solid‐state polymerization method. The polymers were characterized by Fourier transform infrared (FTIR) spectra, ultraviolet–visible (UV–Vis) spectrometry, X‐ray diffraction (XRD), cyclic voltammetry (CV), and conductivity measurements. Transmission electron microscopy (TEM) was done to study the morphologies of POMA and POT salts. The FTIR and UV‐Vis absorption spectra revealed that the reduced phase was predominant in POMA salts, and the pernigraniline phase was predominant in POT salts. It was found that POMA salts displayed higher doping level and conductivity. In contrast, POT salts were lower at doping levels and conductivity. In accordance with these results, the electrochemical activity was also found to be lower in POT salts. The XRD patterns showed that the POMA salts displayed higher crystallinity than POT salts. The results from TEM revealed that the morphologies of POMA salts were different from those of POT salts. Copyright © 2008 John Wiley & Sons, Ltd.     

Construction of a Highly Selective and Sensitive La(III) Sensor Based on N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea for Nano Level Monitoring of La(III) Ions

N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea (PMPT) was found to be a suitable neutral ion carrier for the construction of a highly selective and sensitive La(III) membrane sensor. Poly(vinyl chloride) (PVC) based membranes of PMPT with potassium tetrakis (p‐chlorophenyl) borate (KTpClPB) as an anionic excluder and oleic acid (OA), dibutyl phthalate (DBP), benzyl acetate (BA) and o‐nitrophenyloctyl ether (NPOE) as plasticizing solvent mediators were constructed and investigated as La(III) membrane sensors. A membrane composed of PMPT‐PVC‐KTpClPB‐BA with the ratio 8.0 : 35.0 : 3.0 : 54.0 works well over a very wide concentration range (4.0×10^?8 to 1.0×10^?1 M) with a Nernstian slope of 19.6±0.2 mV per decade of activity between pH values of 4.0 and 9.0. The detection limit of the sensor was calculated to be 2.0×10^?8 M (ca. 3.0 ppb). The sensor displays very good discrimination toward La(III) ions with regard to most common metal ions and lanthanide ions. The proposed sensor shows a short response time for whole concentration range (ca. 12 s). For evaluation of the analytical applicability of the La(III) sensor, it was successfully used as an indicator electrode for the titration of La(III) ions with EDTA. It was also applied to the determination of fluoride content of two mouth wash preparation samples and monitoring of La(III) ions in some binary and ternary mixtures.     

Novel Ytterbium(III) Selective Membrane Sensor Based on N‐(2‐Pyridyl)‐N′‐(2‐Methoxyphenyl)‐Thiourea as an Excellent Carrier and Its Application to Determination of Fluoride in Mouth Wash Preparation Samples

The construction, performance, and applications of a novel ytterbium(III) sensor based on N‐(2‐pyridyl)‐N′‐(2‐methoxyphenyl)‐thiourea (PMT), as an excellent carrier, in plasticized poly(vinyl chloride) PVC matrix, is described. The influences of membrane composition and pH on the potentiometric response of the sensor were investigated. The sensor exhibits a nice Nernstian response for Yb(III) ion over a wide concentration range of 4 decades of concentration (1.0×10^?6–1.0×10^?2 M), and a detection limit of 5.0×10^?7 M. The response time of the electrodes is between 8 and 10 s, depending on the concentration of ytterbium(III) ions. The proposed sensor can be used for about 8 weeks without any considerable divergence in potential. The sensor revealed very good selectivity for Yb(III) in the presence of several metal ions. The best performance was observed for the membrane containing; 30% PVC, 59% o‐nitrophenyloctyl ether (NPOE) as solvent mediator, 7% PMT, and 4% sodium tetraphenyl borate (NaTPB). It was successfully applied as indicator electrodes in the potentiometric titration of Yb(III) with EDTA and for the determination of fluoride ion in two mouth wash formulations. The proposed La(III) sensor was found to work well under laboratory conditions. It was also used as an indicator electrode in titration of a 1.0×10^?4 M of Yb(III) with a standard EDTA solution (1.0×10^?2 M). It was also used for determination of Yb(III) ion in Xenotime .     

A Novel Ion‐Selective Electrode for Determination of the Mercury(II) Ion Based on Schiff Base as a Carrier

A new poly(vinyl chloride) (PVC) membrane ion‐selective electrode based on bis‐salicyladehyde‐diaminjodipropylamine (BSDDA) as an ion carrier was successfully applied to the detection of Hg²⁺ ions. This electrode displayed good selectivity toward Hg²⁺ in comparison with other metal ions and exhibited a Nernstian slope of 30.5 ± 0.4 mV per decade of Hg²⁺ over a concentration range of 9.5 × 10^?7 to 6.4 × 10^?2 M of Hg²⁺ in the pH range 1.5 to 3.5. The detection limit was 7.0 ± 0.2 × 10^?7 M and response time was about 10 s to 25 s. The electrode can be used at least 2 months without apparent divergence in potential. In addition, the effects of experimental parameters such as membrane composition, nature and amounts of plasticizer and additive were investigated. The proposed electrode could be used as an indicator electrode in the detection of Hg²⁺ in samples.