Palladium(II) complexes with the new P,N-type ligand (2-oxazoline-2-ylmethyl)di-isopropylphosphine as intermediates in CO/ethylene or CO/methyl acrylate insertion

The ligand (i-Pr)₂PCH₂(oxazoline) (1a), of the P,N-donor type, was reacted with [PdMeCl(COD)] to yield the square planar methylpalladium(II) complex [PdClMe(P,N)] (P,N = 1a) (2a), from which the complex [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) was obtained by AgOTf-promoted chloride abstraction. The alkyl complexes

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe) have been isolated from the initial CO/ethylene or CO/methyl acrylate insertion steps into the Pd–Me bond of 3a, respectively, and spectroscopically characterized. Complexes 2a, 3a and 7a have been fully characterized by single crystal X-ray diffraction. Complex 7a is still a rare example of a structurally characterized CO/methyl acrylate stepwise insertion product. These complexes are relevant to the alternating copolymerization of olefins and carbon monoxide catalyzed by palladium complexes. In addition, the centrosymmetric dinuclear complex trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) has been obtained and characterized by X-ray diffraction; it appears to be the first dinuclear complex of the type [Pd(μ-Cl)(P,N)]₂ to be characterized by X-ray crystallography.

Résumé

Le ligand (i-Pr)₂PCH₂(oxazoline) (1a), de type donneur P,N, réagit avec [PdClMe(COD)] pour former le complexe plan carré méthylpalladium(II) [PdClMe(P,N)] (P,N = 1a) (2a), à partir duquel le complexe [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) a été obtenu par abstraction de chlorure à l'aide de AgOTf. Les complexes alkyles

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe), ont été isolés lors des premières étapes d'insertion de CO/éthylène ou de CO/acrylate de méthyle, respectivement, dans la liaison Pd–Me de 3a, et caractérisés par méthodes spectroscopiques. Les complexes 2a, 3a et 7a ont été complètement caractérisés par diffraction des rayons X sur monocristal. Le complexe 7a est un exemple encore rare de produit d'insertion par étapes de CO/acrylate de méthyle qui ait été caractérisé structuralement. Ces complexes sont pertinents pour la copolymérisation alternée d'oléfines et de monoxyde de carbone catalysée par les complexes du palladium. En outre, le complexe dinucléaire centrosymétrique trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) a été obtenu et caractérisé par diffraction des rayons X; il s'agit du premier complexe dinucléaire de type [Pd(μ-Cl)(P,N)]₂ à être caractérisé par diffraction des rayons X.     

Seven-membered Pd(II) complexes containing symmetric phosphorus ylides: Synthesis,characterization and high catalytic activity toward Suzuki cross-coupling reactions

The reaction of 1,2-bis(diphenylphosphino)ethane (dppe) with various ketones in acetone produces the new phosphonium salts [RC(O)CH₂PPh₂(CH₂)₂PPh₂CH₂C(O)R]X₂ (R = 2-naphtyl, X = Br (1); R = 2,4-dichlorophenyl, X = Cl (2); R = 3-nitrophenyl, X = Br (3)). Further treatment with a base gives the symmetrical phosphorus ylides, RC(O)CHPPh₂(CH₂)₂PPh₂CHC(O)R (R = 2-naphtyl (4), 2,4-dichlorophenyl (5), 3-nitrophenyl (6)). These ligands react with Pd(II) chloride to form C,C-chelated complexes with the composition [RC(O)CHPPh₂(CH₂)₂PPh₂CHC(O)R]PdCl₂, where R = 2-naphtyl (7), 2,4-dichlorophenyl (8), 3-nitrophenyl (9). These compounds have been characterized by elemental analysis and spectroscopic methods and consist of seven-membered rings formed by the coordination of the ligands through the two ylidic carbon atoms to the metal center. The structure of compound 5 has been characterized crystallographically. The palladium complex 9 is employed in the Suzuki cross-coupling reaction between phenylboronic acid and several aryl halides. It was found to be a competent catalyst for a variety of substrates to afford the coupled products in high yields using DMF as a solvent. The biaryl products were obtained under aerobic conditions in short reaction times with a lower loading of the catalyst (0.001 mol%).     

Intramolecular cyclization of phenol derivatives with CC double bond in a side chain

Intramolecular cyclization of phenol derivatives with CC double bond on a side chain was examined using copper and silver catalyst. For example, 2-allylphenol (1a) was converted to 2,3-dihydro-2-methylbenzofuran (2a) in 70% yield using Cu(OTf)₂ or in 90% yield using AgClO₄. This catalysis was applied to cyclization of 2-allylphenol derivatives, 2-(3-butenyl)phenol, benzoic acids with CC double bond, 2-allyl-N-tosylaniline, and 2-(3-butenyloxy)phenol. Furthermore, allyl phenyl ether was converted to 2a via Claisen rearrangement and cyclization.     

Dimeric and monomeric palladium(II) parent-amido (NH2) complexes: Synthesis,characterization, and reactivity

The treatment of [PdL₃(NH₃)]OTf (L₃ = (PEt₃)₂(Ph) (1), (2,6-(Cy₂PCH₂)₂C₆H₃) (3)) with NaNH₂ in THF afforded dimeric and monomeric parent-amido palladium(II) complexes with bridging and terminal NH₂, respectively, anti-[Pd(PEt₃)(Ph)(μ-NH₂)]₂ (2) and Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂) (4). The dimeric complex 2 crystallizes in the space group P2₁/n with a = 13.228(2) Å, b = 18.132(2) Å, c = 24.745(2) Å, β = 101.41(1)°, and Z = 4. It has been found that there are two crystallographically independent molecules with Pd(1)–Pd(2) and Pd(3)–Pd(4) distances of 2.9594 (10) and 2.9401(9) Å, respectively. The monomeric amido complex 4 protonates from trace amounts of water to give the cationic ammine species [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₃)]⁺. Complex 4 reacts with diphenyliodonium triflate ([Ph₂I]OTf) to give aniline complex [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂Ph)]OTf (5). Reaction of 4 with dialkyl acetylenedicarboxylate (DMAD, DEAD) yields diastereospecific palladium(II) vinyl derivative (Z)–(Pd(Cy₂PCH₂)₂C₆H₃)(CR = CR(NH₂)) (R = CO₂Me (6a), CO₂Et (6b)). Reacting complexes 6a and 6b with p-nitrophenol produces (Pd(Cy₂PCH₂)₂C₆H₃)(OC₆H₄–p-NO₂) (8) and cis-CHR = CR(NH₂), exclusively.     

Preparation of (2,2-difluoroethenylidene)bis(tributylstannane) and arylation reaction: efficient approach to 1,1-diaryl-2,2-difluoroethenes

Reaction of 2,2-difluoro-1-tributylstannylethenyl p-toluenesulfonate (1) with bis(tributyltin) in the presence of 5 mol % Pd(PPh₃)₄ and 30 equiv LiBr in THF at reflux temperature for 7 h afforded (2,2-difluoroethenylidene)bis(tributylstannane) (2) in a 70% yield. Coupling reaction of 2 with aryl iodides in the presence of 5 mol % Pd(PPh₃)₄ and 5 mol % CuI in DMF at 80 °C for 3–4 h provided the coupled products 3 in 59–85% yields.     

Activation of C–H and H–H bonds by dinuclear iridium complexes. Oxidative addition to highly active unsaturated 32e− diiridium species

Reactions of [(Cp¹Ir)₂(μ-dmpm)(μ-H)₂][OTf]₂ (1) with NaO^tBu in aromatic solvent at room temperature give [(Cp¹Ir)(H)(μ-dmpm)(μ-H)(Cp¹Ir)(Ar)][OTf] [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furyl (5a), 3-furyl (5b)] via intermolecular aromatic C–H activation. Treatment of [(Cp¹Ir)₂(μ-dppm)(μ-H)₂][OTf]₂ (2) with weak base (Et₂NH) results in intramolecular C–H activation of a phenyl group in the dppm ligand to give [(Cp¹Ir)(H){μ-PPh(C₆H₄)CH₂PPh₂}(μ-H)(Cp¹Ir)][OTf] (6). Reaction of 1 with NaO^tBu in tetrahydrofuran under H₂ (1 atm) results in activation of the H–H bond to give [{(Cp¹Ir)(H)}₂(μ-dmpm)(μ-H)][OTf] (7). Reaction of 1 with NaO^tBu in dichloromethane under carbon monoxide (1 atm) gives a carbonyl-bridged Ir^II–Ir^II complex, [(Cp¹Ir)₂(μ-dmpm)(μ-H)(μ-CO)][OTf] (8-OTf). These results strongly suggest that the active species in C–H and H–H bond activation starting with 1 and 2 would be unsaturated 32e^? diiridium species. The structures of 3, 5a, 6, 7, and 8-BPh₄ have been determined by X-ray diffraction methods.     

Synthesis and characterization of novel five-membered palladacycles

3-(2-Chloroquinolin-3-yl)-1,5-bis(3,4,5-trimethoxy-phenyl)-pentane-2,4-dione derivatives 3a–b were conveniently synthesized in excellent yields (82% each) by tandem Knoevenagel condensation reactions of 2-chloro-3-carbaldehyde-quinoline 1a–b with 3,4,5-trimethoxy acetophenone, followed by a base catalyzed Michael addition, such as DBU (1,8-diazabicyclo[5,4,0]undec-7-ene) with or without solvent. The reactions of 3a–b with Pd(dba)₂ in the presence of PPh₃ (1:2) in degassed acetone provided the dinuclear palladium complexes {Pd(C,N-2-C₉H₄N–CH–[–CH₂CO(3,4,5-(OMe-)₃–C₆H₂-]₂–3-R-6)Cl(PPh₃)}₂ [(R = H (4a), R = OMe (4b)] in moderate yields (38% and 43%), which in turn reacted with an excess of isonitrile XyNC (Xy = 2,6-Me₂C₆H₃) to give the corresponding palladacycles 5a–b in moderate yields (45% and 43%). The palladacycles 5a–b were also obtained in similar yields (32% and 33%) via a one-pot oxidative addition reaction of 3a-b with isonitrile XyNC:Pd(dba)₂ (4:1). The products were characterized by satisfactory elemental analysis and spectral studies (IR, ¹H, and ³¹P NMR). The crystal structure of 5a was determined by X-ray crystallography diffraction studies.     

Gold-catalyzed intramolecular hydroalkoxylation/cyclization of conjugated dienyl alcohols

Catalytic intramolecular additions of hydroxyl groups to tethered conjugated dienes are described. The reactions proceed smoothly at 60 °C in the presence of 5 mol % of (PPh₃)AuCl/AgOTf as a catalyst. A broad range of structurally diverse conjugated dienes produce substituted tetrahydrofurans and tetrahydropyrans in good yields. This reaction represents an atom-economic route to construct five- and six-membered cyclic ethers.     

Mono- and di-nuclear complexes of thiosemicarbazones with copper(I): Synthesis,spectroscopy and structures

Reactions of copper(I) halides with a series of thiosemicarbazones, namely, benzaldehyde thiosemicarbazone (R¹R²CN–NH–C(S)–NH₂, R¹ = Ph, R² = H; Hbtsc), 2-benzoylpyridine thiosemicarbazone (R¹ = Ph, R² = py; Hbpytsc), and acetone thiosemicarbazone (R¹ = R² = Me; Hactsc), in the presence of PPh₃ has formed dimeric complexes, viz. sulfur bridged [Cu₂(μ-S-Hbtsc)₂Br₂(PPh₃)₂]·2H₂O (1), iodo-bridged [Cu₂(μ-I)₂(η¹-S-Hbtsc)₂(PPh₃)₂] (2), and heterobridged [Cu₂(μ₃-S,N³-Hactsc)(η¹-Br)(μ-Br)(PPh₃)₂] (3), as well as mononuclear complexes [CuX(η¹-S-Hbpytsc)(PPh₃)₂]·CH₃CN (X = Br, 4; Cl, 5). Complexes 1, 2, 4 and 5 involve thiosemicarbazone ligands in η¹-S bonding mode while in compound 3, ligand acts in N³, S-chelation-cum-S-bridging mode (μ₃-S,N³ mode). The intermolecular interactions such as, N²H?X, HN¹H?X (X = S, Br, Cl), CH?π interactions lead to 2D networks. All the complexes have been characterized with the help of elemental analyses, IR, ¹H, and ³¹P NMR spectroscopy, and single crystal X-ray crystallography. The role of a solvent in alteration of nuclearity and bonding modes of complexes has been highlighted.     

Catalytic dehydrocoupling of thienyl/furyl-substituted carbosilanes – Synthesis and characterization of functional poly(hydrosilane)s [RMe2Si(CH2)xSiH]n, (R = 2-Th, 4-Me-2-Th, 2-Fu, 5-Me-2-Fu; x = 2 and 3)

The carbosilanes RMe₂Si(CH₂)_xSiH₃, [R = 2-Th (1a, 2a), 4-Me-2-Th (3a, 4a), 2-Fu (5a, 6a), 5-Me-2-Fu (7a, 8a); x = 2 and 3], with primary SiH₃ end groups undergo a facile dehydropolymerization under ambient conditions (50 °C, 48 h) in presence of Cp₂TiCl₂/2.2 n-BuLi catalyst to afford the corresponding poly(hydrosilane)s 1–8 bearing carbosilyl side chains appended with thienyl/furyl groups. These have been characterized by GPC, IR, multinuclear (¹H, ¹³C{¹H}, ²⁹Si{¹H}) NMR, UV and PL spectral studies.     

Asymmetric hydrogenation reactions with Rh and Ru complexes bearing phosphine–phosphites with an oxymethylene backbone

Phosphine–phosphites 3a and 3b, derived from diphenylhydroxymethyl phosphine have been prepared. From these ligands [Rh(COD)(3a)]BF₄ 5a and RuCl₂(3b)[(S,S)-DPEN] 6b (DPEN = 1,2-diphenylethylenediamine) were synthesized and their structure determined by X-ray diffraction. Ligands 3 are characterized by a small bite angle of 83°. In addition, 5a led to an active catalyst for the hydrogenation of olefins, giving enantioselectivities of up to 96% ee. Likewise, compound 6b showed good activity and enantioselectivity in the hydrogenation of N-1-phenyl ethylidene aniline and a completed reaction at S/C = 500 in 24 h with 83% ee.     

Chiral linear polymers bonded alternatively with salen and 1,4-dialkoxybenzene: synthesis and application for Ti-catalyzed asymmetric TMSCN addition to aldehydes

The synthesis of chiral linear polymers 1a–b having salen and 1,4-dioctyloxybenzene as alternate segments has been accomplished. The GPC analysis showed the molecular weights corresponding to ca. 15 (M_w = 10,999, M_n = 9165 and PDI = 1.20) repeating units for 1a and ca. 8 (M_w = 8547, M_n = 7883 and PDI = 1.08) repeating units for 1b. Polymers 1a–b have been studied with Ti(OⁱPr)₄ as a recyclable catalyst for the asymmetric addition of TMSCN to aldehydes while the selectivity of the polymer catalyst is identical to that of the monomer. The reactions are efficient affording the cyanohydrins with up to 88% ee. The selectivity of the polymer based catalyst 9a is found to be the same to that of the monomer 10a. The reaction provides the advantages of simplified product isolation and easy recovery and recyclability of polymer catalyst 9a without any loss of activity or selectivity.     

Intramolecularly donor-stabilized silenes: Part 6. The synthesis of 1-[2,6-bis(dimethylaminomethyl)phenyl]silenes and their reaction with aromatic aldehydes

The intramolecularly donor-stabilized silenes ArR¹SiC(SiMe₃)₂ (3a–d) (3a: R¹ = Me; 3b: R¹ = t-Bu; 3c: R¹ = Ph; 3d: R¹ = SiMe₃; Ar = 2,6-(Me₂NCH₂)₂C₆H₃) were prepared by treatment of the (dichloromethyl)oligosilanes (Me₃Si)₂R¹Si–CHCl₂ (1a–d), with 2,6-bis(dimethylaminomethyl)phenyllithium (molar ratio 1:2). For 3c and 3d, X-ray structural analyses were performed indicating that only one dimethylamino group of the tridentate ligand is coordinated to the electrophilic silene silicon atoms, i.e., the central silicon atoms are tetracoordinated. The N → Si donation leads to pyramidalization at the silene silicon atoms; the configuration at the silene carbon atoms is planar. For a chemical characterization 3a and 3c were treated with water to give the silanols ArR¹Si(OH)–CH(SiMe₃)₂ (5a,c). Studies of the reactions of 3a and 3c with benzaldehyde, 4-chlorobenzaldehyde or 4-methoxybenzaldehyde, respectively, revealed an unexpected reaction path leading to the substituted 2-oxa-1-sila-1,2,3,4-tetrahydronaphthalenes 12a, 12c, 13 and 14. Both 12a and 12c were structurally characterized by X-ray analyses. The formation of these six-membered cyclic compounds, which is discussed in detail, gives support to a dipolar mechanism for the general reaction of silenes with carbonyl derivatives.     

Dinuclear ruthenium(I) complexes of the type [Ru2(CO)4L2] with carboxylate or 2-pyridonate ligands: Evaluation as catalysts for olefin cyclopropanation with diazoacetates

Dinuclear ruthenium(I,I) carboxylate complexes [Ru₂(CO)₄(μ-OOCR)₂]_n (R = CH₃ (1a), C₃H₇ (1b), H (1c), CF₃ (1d)) and 2-pyridonate complex [Ru₂(CO)₄(μ-2-pyridonate)₂]_n (3) catalyze efficiently the cyclopropanation of alkenes with methyl diazoacetate. High yields are obtained with terminal nucleophilic alkenes (styrene, ethyl vinyl ether, α-methylstyrene), medium yields with 1-hexene, cyclohexene, 4,5-dihydrofuran and 2-methyl-2-butene. The E-selectivity of the cyclopropanes obtained from the monosubstituted alkenes and the cycloalkenes decreases in the order 1b > 1a > 1d > 1c. The cyclopropanation of 2-methyl-2-butene is highly syn-selective. Several complexes of the type [Ru₂(CO)₄(μ-L¹)₂]₂ (4) and (5), [Ru₂(CO)₄(μ-L¹)₂L²] (L² = CH₃OH, PPh₃) (6)–(9) and [Ru₂(CO)₄(CH₃CN)₂(μ-L¹)₂] (10) and (11), where L¹ is a 6-chloro- or 6-bromo-2-pyridonate ligand, are also efficient catalysts. Compared with catalyst 3, a halogen substituent at the pyridonate ligand affects the diastereoselectivity of cyclopropanation only slightly.     

Hydroesterification of cyclohexene using the complex Pd(PPh3)2(TsO)2 as catalyst precursor: Effect of a hydrogen source (TsOH,H2O) on the TOF and a kinetic study (TsOH: p-toluenesulfonic acid)

The hydroesterification of cyclohexene is catalyzed by a preformed Pd(PPh₃)₂(TsO)₂ complex I in methanol as solvent. The effect of PPh₃, TsOH, and water on the TOF has been evaluated. The system I/PPh₃/TsOH=1/6/8, in the presence of 800 ppm of H₂O, at 373 K and under 2.0 MPa of CO leads to a TOF as high as 850 h⁻¹. The increase of TOF observed adding a hydride source such as TsOH and H₂O suggests that Pd-hydride species plays a key role in the first step of the catalytic cycle. The initial reaction rate increases linearly with the concentration of cyclohexene and of MeOH and passes through a maximum with increasing the pressure of CO. The rate equation r₀=k₁P_CO (1+k₂P_CO+k₃P_CO²)⁻¹ fits well the experimental data. The values of k₁, k₂, and k₃ have been evaluated at different temperatures. From the plot ln k versus 1/T, E₁=19.4 kcal/mol, E₂=20.6 kcal/mol and E₃=6.5 kcal/mol have been evaluated. On the basis of experimental evidences and of the kinetic study, a catalytic cycle mechanism has been proposed.     

Synthesis and catalytic properties of cationic palladium(II) and rhodium(I) complexes bearing diphosphinidinecyclobutene ligands

Cationic palladium(II) and rhodium(I) complexes bearing 1,2-diaryl-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene ligands (DPCB–Y) were prepared and their structures and catalytic activity were examined (aryl = phenyl (DPCB), 4-methoxyphenyl (DPCB–OMe), 4-(trifluoromethyl)phenyl (DPCB–CF₃)). The palladium complexes [Pd(MeCN)₂(DPCB–Y)]X₂ (X = OTf, BF₄, BAr₄ (Ar = 3,5-bis(trifluoromethyl)phenyl)) were prepared by the reactions of DPCB–Y with [Pd(MeCN)₄]X₂, which were generated from Pd(OAc)₂ and HX in MeCN. On the other hand, the rhodium complexes [Rh(MeCN)₂(DPCB–Y)]OTf were prepared by the treatment of [Rh(μ-Cl)(cyclooctene)₂]₂ with DPCB–Y in CH₂Cl₂, followed by treatment with AgOTf in the presence of MeCN. The cationic complexes catalyzed conjugate addition of benzyl carbamate to α,β-unsaturated ketones.     

Tuning the electronic properties of Fe2(μ-arenedithiolate)(CO)6−n(PMe3)n (n = 0, 2) complexes related to the [Fe–Fe]-hydrogenase active site

Complexes [Fe₂(μ-S₂Ar)(CO)₆] (S₂Ar) = benzene-1,2-dithiolate (1a) toluene-3,4-dithiolate (2a), 3,6-dichloro-1,2-benzenedithiolate (3a), quinoxaline-2,3-dithiolate (7a) have been prepared to investigate the electronic effect that different bridging arenedithiolate ligands have on the appended Fe₂(CO)₆ sites. Dinuclear complexes [Fe₂(μ-S₂Ar)(CO)₄(PMe₃)₂] (1–3,7)b and mononuclear complexes [Fe(S₂Ar)(CO)₂(PMe₃)₂] (1–3,7)c were synthesized from their parent hexacarbonyl complexes (1–3,7)a. IR spectroscopic, crystallographic and electrochemical analyses show that an increase of the electron-withdrawing character (where quinoxaline-2,3-dithiolate > 3,6-dichloro-1,2-benzenedithiolate > 1,2-benzenedithiolate ≥ toluene-3,4-dithiolate) of the bridging ligand leads to a decreased electron density at the iron centers, which yield a milder reduction potential and higher eCO stretching frequencies. This effect is coherent for all of the investigated complexes. Electrocatalytic proton reduction by complex 3a (with trifluoromethanesulfonic acid) was evidenced by cyclic voltammetry. As a result of the milder reduction potential of 3a itself, proton reduction that is promoted by 3a proceeds at a potential that is milder than that for the 1a-catalyzed process.     

Mononuclear ruthenium(III) complexes containing chelating thiosemicarbazones: Synthesis,characterization and catalytic property

Mononuclear ruthenium(III) complexes of the type [RuX(EPh₃)₂(L)] (E = P or As; X = Cl or Br; L = dibasic terdentate dehydroacetic acid thiosemicarbazones) have been synthesized from the reaction of thiosemicarbazone ligands with ruthenium(III) precursors, [RuX₃(EPh₃)₃] (where E = P, X = Cl; E = As, X = Cl or Br) and [RuBr₃(PPh₃)₂(CH₃OH)] in benzene. The compositions of the complexes have been established by elemental analysis, magnetic susceptibility measurement, FT-IR, UV–vis and EPR spectral data. These complexes are paramagnetic and show intense d–d and charge transfer transitions in dichloromethane. The complexes show rhombic EPR spectra at LNT which are typical of low-spin distorted octahedral ruthenium(III) species. All the complexes are redox active and display an irreversible metal centered redox processes. Complex [RuCl(PPh₃)₂(DHA–PTSC)] (5) was used as catalyst for transfer hydrogenation of ketones in the presence of isopropanol/KOH and was found to be the active species.     

Formation and isomerization of cis,cis-Ir(H)2(--Ph)(CO)(PPh3)2 and cis,cis-Ir(H)(--Ph)2(CO)(PPh3)2 in oxidative addition of hydrogen and phenylacetylene to trans-Ir(CO)(--Ph)(PPh3)2

Oxidative addition of H–R (H--Ph and H₂) to trans-Ir(--Ph)(CO)(PPh₃)₂ (2) gives the initial products, cis, cis-Ir(H)(--Ph)₂(CO)(PPh₃)₂ (3a) and cis, cis-Ir(H)₂(--Ph)(CO)(PPh₃)₂ (3b), respectively. Both cis-bis(PPh₃) complexes, 3a and 3b undergo isomerization to give the trans-bis(PPh₃) complexes, trans, trans-Ir(H)(--Ph)₂(CO)(PPh₃)₂ (4a) and cis, trans-Ir(H)₂(--Ph)(CO)(PPh₃)₂ (4b). The isomerization, 3b→4b is first order with respect to 3b with k₁=6.37×10⁻⁴ s⁻¹ at 25°C under N₂ in CDCl₃. The reaction rate (k₁) seems independent of the concentration of H₂. A large negative entropy of activation (ΔS^≠=−24.9±5.7 cal deg⁻¹ mol⁻¹) and a relatively small enthalpy of activation (ΔH^≠=14.5±3.3 kcal mol⁻¹) were obtained in the temperature range 15∼35°C for the isomerization, 3b→4b under 1 atm of H₂.     

Synthesis and characterization of organophosphine/phosphite stabilized N-silver(I) succinimide: crystal structure of [(Ph3P)3 · AgNC4H4O2]

Six organophosphine/phosphite stabilized N-silver(I) succinimide complexes of the type L_n · AgNC₄H₄O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) have been prepared by reacting [AgNC₄H₄O₂], which can be synthesized from succinimide and excessive Ag₂O in boiling water, with triphenylphosphine or triethylphosphite in dichloromethane under a nitrogen atmosphere. These complexes were obtained in high yields and characterized by elemental analysis, ¹H, ¹³C{H} NMR, IR spectroscopy and thermal analysis (TG and DSC). The molecular structure of 2c has been determined by X-ray single crystal analysis, in which the silver atom is in a distorted tetrahedral geometry.