HPLC determination of tobramycin in a simulated body fluid

To evaluate the release kinetics, in a simulated body fluid, of tobramycin (TOB) from carbonated apatite (CHA) in the form of granulate, a sensitive and reliable liquid chromatographic method was developed. Chromatographic separation was performed on a Metrosep Carb 1 anionic column by using 0.1 M NaOH as mobile phase at a flow rate of 1.0 ml min^− 1. TOB was quantified by pulsed amperometric detection using a 3-potential waveform on Au electrode. A linear relationship for TOB was found in the range 0.17-2.50 mg l^− 1 with a LOD of 0.05 mg l^− 1. The method exhibited good retention time and peak area reproducibility.     

Study on the interaction of aminoglycoside antibiotics with Titan Yellow by spectrophotometric method and their analytical applications

In a weak acidic medium, the reaction of some aminoglycoside antibiotics (AGs) such as kanamycin sulfate (KANA), gentamycin sulfate (GEN), and tobramycin sulfate (TOB) with acid thiazolyl bisazo dye Titan Yellow (TY) can result in the fading of TY. The maximum fading wavelength was located at 409 nm. The molar absorptivities (ɛ/×10⁴ 1 mol⁻¹ cm⁻¹) were 2.0, 1.5 and 2.5 for KANA, GEN and TOB, respectively. The spectral characteristics, effect factors, optimum conditions of the reaction and the influence of foreign substances were also investigated. The procedure is easy and fast. This method has high sensitivity and can be applied to the determination of commercial aminoglycoside antibiotics and serum samples with satisfactory results. __________ Translated from Journal of southwest China Normal University, 2005, 30(2) (in Chinese)     

The reaction of triphenylmethylhalophosphines with tetrachloro‐orthobenzoquinone: Oxidation—isomerization—dehydrohalogenation

Treatment of solutions of the halophosphines TrtP(H)F (Trt = trityl, Ph₃C) 1a and TrtP(H)Cl 1b with equimolar amounts of TOB (tetrachloro‐orthobenzoquinone) led to the formation of mixtures of products. They contained the phosphoranes 2a and 2b, which were formed by oxidation with TOB and are in equilibrium with the phosphines 3a and 3b. Moreover, the trityl phosphonite 4, which was formed by dehydrohalogenation of 2a, 2b and 3a, 3b, was observed in both mixtures. The dehydrohalogenation was found to be reversible in the case of HF. The pure compounds 4 and 5 were obtained from the reaction of TrtPCl₂ with tetrachlorocatechol 4 and by the oxidation of 1a and 1b with two equivalents of TOB. Because of its importance in this reaction sequence, an X‐ray crystal structure determination was carried out on 4. The P–O bond lengths of 168.4(2) and 167.7(2) pm are probably to be attributed to a bond‐lengthening effect of the chlorine atoms of the quinone. As a comparison with analogous systems reveals, the phosphorane 5 is an example of a σ⁵λ⁵(P) species in which the phosphorus atom exhibits square‐pyramidal coordination. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 277–280, 1999     

Crystal structures of the double perovskites Ba2Sr1−xCaxWO6

Structures of the double perovskites Ba₂Sr_1−xCa_xWO₆ have been studied by the profile analysis of X-ray diffraction data. The end members, Ba₂SrWO₆ and Ba₂CaWO₆, have the space group I2/m (tilt system a⁰b⁻b⁻) and Fm3¯m (tilt system a⁰a⁰a⁰), respectively. By increasing the Ca concentration, the monoclinic structure transforms to the cubic one via the rhombohedral R3¯ phase (tilt system a⁻a⁻a⁻) instead of the tetragonal I4/m phase (tilt system a⁰a⁰c⁻). This observation supports the idea that the rhombohedral structure is favoured by increasing the covalency of the octahedral cations in Ba₂MM′O₆-type double perovskites, and disagrees with a recent proposal that the formation of the π-bonding, e.g., d⁰-ion, determines the tetragonal symmetry in preference to the rhombohedral one.     

The stereochemistry of Tutton's salts X2[M(H2O)6](YO4)2

Neutron structure determinations have been made of Tutton's salts, X₂[M(H₂O)₆] (YO₄)₂, where Y = Se, X = K⁺, M = Cu²⁺; Y = S, X = K⁺, M = Ni²⁺, Cu²⁺, Zn²⁺; X = Rb⁺, Cs⁺, M = Cu²⁺. This work has shown that there are extensive hydrogen networks with almost linear hydrogen bonds from [M(H₂O)₆]²⁺ to (YO₄)^2?. The (H … O) distance increases in the Cu²⁺ series for X = K⁺ to Cs⁺ but there is no difference for the potassium copper salts when Y = Se or S. Three different distorted [M(H₂O)₆]²⁺ octahedra were found in the series (orthorhombic, tetragonal with two long and four short, or four long and two short bonds). The interatomic distances from X⁺ to the neighboring O in a distorted XO₈⁺ dodecahedron increases with increased cation size, implying that the X⁺ polyhedron is maintaining its shape.     

Thermoelectric properties of polycrystalline La1−xSrxCoO3

Thermoelectric properties of polycrystalline La_1−xSr_xCoO₃, where Sr²⁺ is substituted in La³⁺ site in perovskite-type LaCoO₃, have been investigated. Sr-doping increases the electrical conductivity (σ) of La_1−xSr_xCoO₃, and also decreases the Seebeck coefficient (S) for 0.01?x?0.40. A Hall coefficient measurement reveals that the increase in electrical conductivity arises from increases in both carrier concentration and the Hall mobility. The decrease in the Seebeck coefficient is caused by a decrease in carrier effective mass as well as increase in carrier concentration. The highest power factor (σS²) is 3.7×10⁻⁴ W m⁻¹ K⁻² at 250 K for x=0.10. The thermal conductivity (κ) is about 2 W m⁻¹ K⁻¹ at 300 K for 0?x?0.04, and increases for x?0.05 because of an increase in heat transport by conductive carrier. The thermoelectric properties of La_1−xSr_xCoO₃ are improved by Sr-doping, and the figure of merit (Z=σS² κ⁻¹) reaches 1.6×10⁻⁴ K⁻¹ for x=0.06 at 300 K (ZT=0.048). For heavily Sr-doped samples, the thermoelectric properties diminish mainly because of the decrease in the Seebeck coefficient and the increase in thermal conductivity.     

A combined X-ray diffraction and Raman scattering study of the phase transitions in Sr1−xCaxTiO3 (x=0.04, 0.06, and 0.12)

Results of powder X-ray diffraction and Raman scattering studies on the phase transitions in Sr_1−xCa_xTiO₃ (SCT) are presented for x=0.04, 0.06 and 0.12 in the temperature range 8-473 K. It is proposed that the space group of SCT in the composition range 0.06?x?0.35 is Imma with a⁰b^-b^- tilt system and not I4/mcm with a⁰a⁰c^- tilt system, as assumed by earlier workers. The lowering of the crystal symmetry from I4/mcm to Imma is supported by the observation of additional Raman lines, in agreement with the factor group analysis for the Imma space group. The structural E_g mode, characteristics of the non-cubic phase, is shown to be present even in the cubic phases of x=0.06 and x=0.12 but not of x=0.04 indicating the change in the local structure of the cubic phase of SCT for x?0.06. The presence of symmetry forbidden TO₂ mode in the Raman spectra of the cubic phase of SCT for x<0.06 and its absence for x?0.06 provides yet another characteristic feature distinguishing the I4/mcm and Imma space groups. The implications of the change in the tilt system from a⁰a⁰c^- to a⁰b^-b^- on the development of the polar order is also discussed.     

Demethoxycarbonylation and oxidation of 13(S/R)-hydroxy-chlorophyll a to 13-demethoxycarbonyl-13-oxo-chlorophyll a and Mg-purpurin-18 phytyl ester

The conversion of 13²(S/R)-hydroxy-chlorophyll (Chl) a to 13²-demethoxycarbonyl-13²-oxo-Chl a in a yield of 40%, utilizing a simple pyrolysis technique, is described. About 10% of the phytyl ester of Mg-purpurin-18 was formed as a side product. The completely assigned ¹H and ¹³C NMR spectra are presented for 13²-demethoxycarbonyl-13²-oxo-Chl a and a likely mechanism for its formation is proposed. A slight extension of this mechanism also explains the formation of the Mg-purpurin-18 side product. The proposed mechanism has several features comparable with those previously suggested for the allomerization of 13²(R/S)-Chl a. Attempts to apply the same pyrolysis method to prepare 13²-demethoxycarbonyl-13²-oxo-Chl b from 13²(S/R)-hydroxy-Chl b were unsuccessful.     

Thermoelectric Properties (Resistivity and Thermopower) in (Bi1.5Pb0.5Ca2−xMxCo2O8−δ (M=Sc, Y, or La)

In order to understand the origin of good thermoelectric (TE) properties in the transition metal oxides with the lattice structure isomorphous to the 232-structure, the bond nature between Co and O ions in Bi_1.5Pb_0.5Ca_2−xM_xCo₂O_8−δ-system has been tried to vary by replacing M with Sc³⁺, Y³⁺ or La³⁺ and by changing x from 0 to 0.3. The resistivity is minimum at x = 0.1 in Sc- and Y-systems, but very high in La-system. The large thermopower is obtained in every compound. The experimental TE properties have been discussed mainly within the framework of the charge-transfer scheme in which the ionic radii of Sc³⁺ and Y³⁺ smaller than Ca²⁺ reduce the energy between O 2p levels and Co e_g parentages but the large ionic radius of La³⁺ expands it. The oxygen solubility in the compounds and the lattice distortion peculiar to the 232-structure are also likely to contribute somewhat to the experimental results.     

Oxidative Addition of Hexafluoroacetone,Perfluorinated 1,2-Diketones and Tetrachloro-O-Benzoquinone to Compounds of Low-Valent Phosphorus-New Modes of Addition and Unusual Products

Abstract

The reaction of hexafluoroacetone (HFA) with the benzoxazaphosphorinone 1 leads to the λ⁵-oxazaphosphepinone 2. In several cases unusual products, 3, 8 - 14, 16, and 17, were isolated in the reactions of 1, 4 - 7, and 15 with HFA, tetrachloroorthobenzoquinone (TOB) and perfluorinated 1,2-diketones. X-Ray crystal structure analyses were carried out for the derivatives 2, 3, and 8 - 10.     

The pair polarizabilities of Li+/Li+ and Cl−/Cl−

Ab initio SCF MO energies and pair polarizabilities are reported for the pairs Li⁺/Li⁺ and Cl^?/Cl^? over the ranges of internuclear separation which are of importance in molten LiCl. The shapes of the β(R) curves resemble those of inert gas diatoms. The Cl^?/Cl^? interaction is predicted to make a rather small contribution to those properties of molten LiCl which depend on $\text{α}$⁽²⁾(R), and a larger contribution to properties which depend on β(R). The Li⁺/Li⁺ interaction contributes almost nothing to the bulk polarizability.     

Transmission electron microscopy study of Ruddlesden-Popper Can+1MnnO3n+1n=2 and 3 compounds

Two Ruddlesden-Popper compounds Ca_n+1Mn_nO_3n+1 with n=2 and 3 synthesized by a citrate gel technique have been studied by TEM. The structure of Ca₄Mn₃O₁₀ is consistent with the previously determined structure having the space group Pbca and a⁻ a⁻ c⁺/a⁻ a⁻ c⁺ tilt system. The presence of defects suggests the possible high-temperature phase transition from untilted I4/mmm to Pbca. The structure of Ca₃Mn₂O₇ was found to be different from the previously suggested I4/mmm symmetry. Ca₃Mn₂O₇ forms with an orthorhombic structure with either Cmcm or Cmc2₁ space group. A structural model for Cmc2₁ based on the tilting of almost-rigid octahedra with a⁺ c⁻ c⁻/a⁺ c⁻ c⁻ tilt system is proposed. The lamellar defects were shown to be twin variants of the Cmc2₁ structure with the (001)_t interfaces, which suggests the possible tilting phase transition from the ideal I4/mmm to Cmc2₁ following the maximal group-subgroup symmetry tree: I4/mmm→Fmmm→Bbmm(Cmcm)→Bb2₁m(Cmc2₁).     

Influence of Co doping on properties of Pr0.8Na0.2Mn(1−y)CoyO3 perovskites

The influence of the cobalt substitution for manganese ions in the series of the perovskites Pr_0.8Na_0.2Mn_(1−x)Co_xO₃ (0?x?0.1) was investigated. The study of electric and magnetic properties was carried out on sintered polycrystalline samples. The composition of x=0.04 exhibits an insulator to metal-like (I-M) transition at ∼106 K, connected with a ferromagnetic arrangement. For x=0.1, however, an insulating behavior persists down to low temperatures in spite of the transition to the bulk ferromagnetism. The observed properties are related to an acting of the cobalt ions as point defects. They disturb the tendency to charge ordering and instead of the antiferromagnetic arrangement typical for x=0 ferromagnetic double-exchange interactions Mn³⁺-O²⁻-Mn⁴⁺ and Mn^3.5+δ-O²⁻-Co²⁺, decisive for the resulting behavior, arise.     

Li and Li MAS NMR Studies on Fast Ionic Conducting Spinel-Type Li2MgCl4, Li2-xCuxMgCl4, Li2-xNaxMgCl4, and Li2ZnCl4

⁶Li and ⁷Li MAS NMR spectra including 1D-EXSY (exchange spectroscopy) and inversion recovery experiments of fast ionic conducting Li₂MgCl₄, Li_2-xCu_xMgCl₄, Li_2-xNa_xMgCl₄, and Li₂ZnCl₄ have been recorded and discussed with respect to the dynamics and local structure of the lithium ions. The chemical shifts, intensities, and half-widths of the Li MAS NMR signals of the inverse spinel-type solid solutions Li_2-xM^I_xMgCl₄ (M^I=Cu, Na) with the copper ions solely at tetrahedral sites and sodium ions at octahedral sites and the normal spinel-type zinc compound, respectively, confirm the assignment of the low-field signal to Li^tet of inverse spinel-type Li₂MgCl₄ and the high-field signal to Lioct as proposed by Nagel et al. (2000). In contrast to spinel-type Li_2-2xMg_1+xCl₄ solid solutions with clustering of the vacancies and Mg²⁺ ions, the Cu⁺ and Na⁺ ions are randomly distributed on the tetrahedral and octahedral sites, respectively. The activation energies due to the various dynamic processes of the lithium ions in inverse spinel-type chlorides obtained by the NMR experiments are E_a=6.6-6.9 and ΔG^*>79 KJ mol⁻¹ (in addition to 23, 29, and 75 kJmol-1 obtained by other techniques), respectively. The largest activation energy of >79 KJ mol⁻¹ corresponds to hopping exchange processes of Li ions between the tetrahedral 8a sites and the octahedral 16d sites. The smallest value of 6.6-6.9 KJ mol⁻¹, which was derived from the temperature dependence of both the spin-lattice relaxation times T₁ and the correlation times τ_C of Li^tet, reveals a dynamic process for the Li^tet ions inside the tetrahedral voids of the structure, probably between fourfold 32e split sites around the tetrahedral 8a site.     

Lithium-substituted cobalt oxide spinels LixM1−xCo2O4 (M = Co2+, Zn2+; 0 ≤ x ≤ 0.4)

Substitution of Li⁺ into Co₃O₄ and ZnCo₂O₄ gives rise to the solid solution series Li_xM_1?xCo₂O₄ (M = Co²⁺ or Zn²⁺) having the spinel structure upto x = 0.4. X-Ray diffraction intensities show that the spinel solid solutions are likely to have the following cation distributions: (Co²⁺)_t[Li⁺_xCo³⁺_2?3xCo⁴⁺_2x]₀O₄ and (Zn²⁺_1?xCo²⁺_x)_t[Li⁺_xCo³⁺_2?3xCo⁴⁺_2x]₀O₄. Electrical resistivity and Seebeck coefficient data indicate that the electron transport in these systems occurs by a small-polaron hopping mechanism.     

Three-layer Aurivillius phases containing magnetic transition metal cations: Bi2−xSr2+x(Nb,Ta)2+xM1−xO12, M=Ru, Ir, Mn, x≈0.5

We report the synthesis of Aurivillius-type phases incorporating magnetic M⁴⁺ cations (M=Mn, Ru, Ir), based on the substitution of M⁴⁺ for Ti⁴⁺ in Bi₂Sr₂(Nb,Ta)₂TiO₁₂. The key to incorporating these magnetic transition metal cations appears to be the partial substitution of Sr²⁺ for Bi³⁺ in the α-PbO-type layer of the Aurivillius phase, leading to a concomitant decrease in the M⁴⁺ content; i.e., the composition of the prepared compounds was Bi_2−xSr_2+x(Nb,Ta)_2+xM_1−xO₁₂, x≈0.5. These compounds only exist over a narrow range of x, between an apparent minimum (x≈0.4) Sr²⁺ content in the α-PbO-type [Bi₂O₂] layer required for Aurivillius phases to form with magnetic M⁴⁺ cations, and an apparent maximum (x≈0.6) Sr²⁺ substitution in this [Bi₂O₂] layer. Rietveld-refinement of synchrotron X-ray powder diffraction data making use of anomalous dispersion at the Nb and Ru K edges show that the overwhelming majority of the incorporated M cations occupy the central of the three MO₆ octahedral layers in the perovskite-type block. Magnetic susceptibility measurements are presented and discussed in the context of the potential for multiferroic (magnetoelectric) properties in these materials.     

The crystal chemistry of the M+VO3 (M+ = Li,Na, K,NH4, Tl,Rb, and Cs) pyroxenes

The crystal structures of M⁺VO₃(M⁺ = K, NH₄, and Cs) have been refined using three-dimensional counter-diffractometer X-ray data and full-matrix least-squares methods. The structure of these compounds is characterized by a (V⁵⁺O^2?₃)^?_∞ chain extending along the c-axis (Pbcm orientation), with adjacent chains linked by the alkali metal cation. The structure may be considered as a variant of the pyroxene structure, and standard atom nomenclature is proposed in order to facilitate comparison with silicate pyroxenes. Structural variation across this series is discussed in detail and is compared with the analogous M⁺M³⁺Si₂O₆ (M⁺ = Li, Na; M³⁺ = Al, Cr, Fe, Sc, In) series.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

The luminescence of Pr3+ in BaY4Si5O17

The cell constants of four new monoclinic compounds BaR₄X₅O₁₇ (R = Y, Gd; X = Si, Ge) are given. The luminescence of various RE activators in the silicates is reported. Pr³⁺-activated BaY₄Si₅O₁₇ shows efficient ultraviolet 5d → 4f emission and weak 4f → 4f emission (mainly red luminescence from the ¹D₂ level). The 5d → 4f emission is ascribed to Pr³⁺ on Y sites, the 4f → 4f emission to Pr³⁺ on Ba sites. Energy transfer from Pr³⁺ to Gd³⁺ has been observed. Gd³⁺ plays an intermediate role in the energy transfer from Pr³⁺ to Sm³⁺ and to Dy³⁺ in BaGd₄Si₅O₁₇. Upon activation with Tb³⁺ the silicates show characteristic green Tb³⁺ luminescence with a quantum efficiency of 75% for ultraviolet excitation.