Combined 1H NMR and DFT study of the solvent effects on the iron pentacarbonyl‐catalyzed photo‐assisted isomerization of allyl alcohol

The relative rates of iron pentacarbonyl‐catalyzed photo‐induced isomerization of allyl alcohol to propanal in various solvents have been measured using ¹H NMR spectroscopy. The reactions were run in linear and cyclic alkanes, alcohols, and amines in order to investigate solvent effects on the isomerization mechanism upon ultraviolet irradiation. The isomerization was efficient in nonane, hexane, cyclohexane, and benzene. The isomerization was very slow or completely suppressed in ethanol, propanol, isopropanol, triethylamine, and pyridine. Density functional theory calculations predicted thermodynamically favorable (ΔG^o < 0) formation of Fe(CO)₄–solvent compounds in the suppressing alcohol/amine solvents and unfavorable (ΔG^o > 0) formation in the hydrocarbon solvents. The strong solvent ligation likely prevents formation of Fe(CO)₃●(η²‐alkene) necessary for isomerization. Copyright © 2013 John Wiley & Sons, Ltd.     

Degenerate thermal isomerizations of bicyclo[3.1.1]hept‐2‐ene: strategy and analysis

Bicyclo[3.1.1]hept‐2‐ene was first prepared and well identified in 1972. In 1974, the degenerate thermal isomerization involving 1‐d‐ and 3‐d‐bicyclo[3.1.1]hept‐2‐ene was approached successfully, as one of the two deuterium‐labeled structures was selected, heated, and equilibrated. There has been no further study of this degenerate isomerization. Here, a detailed outline of reaction trajectories for d₂‐labeled bicyclo[3.1.1]hept‐2‐enes is given that will establish the four independent kinetic parameters needed for 20 linking paths between six d₂‐species. The use of racemates, eliminating chiral separations and dissections, provides degenerate isomerization paths providing this method with general utility. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP)

Hydrolytic reactions of cyclic bis(3′‐5′)diadenylic acid (c‐di‐AMP) have been followed by Reversed phase high performance liquid chromatography (RP‐HPLC) over a wide pH range at 90 °C. Under neutral and basic conditions (pH ≥ 7), disappearance of the starting material (first‐order in [OH^?]) was accompanied by formation of a mixture of adenosine 2′‐monophosphate and 3′‐monophosphate (2′‐AMP and 3′‐AMP). Under very acidic conditions (from H₀ = ?0.7 to 0.2), c‐di‐AMP undergoes two parallel reactions (first‐order in [H⁺]): the starting material is cleaved to 2′‐AMP and 3′‐AMP and depurinated to adenine (i.e., cleavage of the N‐glycosidic bond), the former reaction being slightly faster than the latter one. At pH 1–3, isomerization to cyclic bis(2′‐5′)diadenylic acid competes with the depurination. Copyright © 2012 John Wiley & Sons, Ltd.     

Hydrogen‐bonded nucleophile effects in ANS: the reactions of 1‐chloro and 1‐fluoro‐2,4‐dinitrobenzene with 2‐guanidinobenzimidazole, 1‐(2‐aminoethyl)piperidine and N‐(3‐aminopropyl)morpholine in aprotic solvents

The kinetics of the reactions of 2,4‐dinitrofluorobenzene (DNFB) and 2,4‐dinitrochlorobenzene (DNClB) with 2‐guanidinobenzimidazole (2‐GB) at 40 ± 0.2 °C in dimethylsulphoxide (DMSO), toluene, and in toluene–DMSO mixtures, and with 1‐(2‐aminoethyl)piperidine (2‐AEPip) and N‐(3‐aminopropyl)morpholine (3‐APMo) in toluene at 25 ± 0.2 °C were studied under pseudo first‐order conditions. For the reactions of 2‐GB carried out in pure DMSO, the second‐order rate coefficients were independent of the amine concentration. In contrast, the reactions of 2‐GB with DNFB in toluene, showed a kinetic behaviour consistent with a base‐catalysed decomposition of the zwitterionic intermediate. These results suggest an intramolecular H‐bonding of 2‐GB in toluene, which is not present in DMSO. To confirm this interpretation the reactions were studied in DMSO–toluene mixtures. Small amounts of DMSO produce significant increase in rate that is not expected on the basis of the classical effect of a dipolar aprotic medium; the effect is consistent with the formation of a nucleophile/co‐solvent mixed aggregate. For the reactions of 3‐APMo with both substrates in toluene, the second‐order rate coefficients, k_A, show a linear dependence on the [amine]. 3‐APMo is able to form a six‐membered ring by an intramolecular H‐bond which prevents the formation of self‐aggregates. In contrast, a third order was observed in the reactions with 2‐AEPip: these results can be interpreted as a H‐bonded homo‐aggregate of the amine acting as a better nucleophile than the monomer. Most of these results can be well explained within the frame of the ‘dimer nucleophile’ mechanism. Copyright © 2010 John Wiley & Sons, Ltd.     

Understanding halogen‐substituent assistance in H‐atom abstraction‐based reactions of CHCl•− with CH4 − nXn (X = H,F, Cl; n = 0–3)

The effect of halogen‐substituent on hydrogen abstraction mechanisms was studied by applying density functional theory functional calculations to the gas‐phase reactions between CHCl^?? and CH_{4 ? n}X_n (X = H, F, Cl; n = 0–3), and it is found that a heavier X substituent in the substrate results in a greater stabilization of corresponding complex, a lower activation energy, a faster H‐abstraction reaction, and greater exothermicity. However, CH₄– reaction is more reactive than CH₃F– reaction under the same condition because of dominant π‐donation from the electronegative F atom. We also explored the reactivity difference for the seven reactions in terms of factors derived from bond order, second‐order perturbative energy, and activation strain model analysis. The rate constants are evaluated over a wide temperature range of 298–1000 K by the conventional transition state theory. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of N‐alkoxybenzimidoyl azides and their reactions in electrophilic media

A new general route to N‐alkoxybenzimidoyl azides [ArC(N₃)=NOR] from a reaction of N‐alkoxybenzimidoyl bromide [ArC(Br)=NOR] with sodium azide in DMSO is described. These reactions result in the Z‐geometric configuration. These compounds show a moderate degree of thermal stability as assessed by differential scanning calorimetry, and lack reactivity in traditional 1,3‐dipolar cycloaddition ‘click’ reactions. Upon exposure to electrophilic compounds (trifluoroacetic acid or acetyl chloride), these azide compounds can react by two pathways: a Schmidt‐type rearrangement to form an N‐alkoxyurea or an isomerization–cyclization reaction pathway to form an N‐alkoxytetrazole. The route of the reaction has no dependence on solvent polarity and appears to depend upon the electrophile (H⁺ vs. CH₃CO⁺): reaction of the azide with trifluoroacetic acid results predominantly in the urea; reaction with acetyl chloride results solely in the tetrazole. Calculations indicate that the urea product is thermodynamically favored over the tetrazole product. They also indicate that both reaction conditions result in an equilibration between the starting azide and the tetrazole with the tetrazole being the major component in this equilibrium mixture. The fact that the azide also undergoes a Schmidt‐type rearrangement to form an N‐alkoxyurea when treated with trifluoroacetic acid appears to indicate that the barrier for aromatic ring migration is lower in the protonated azide produced on reaction with trifluoroacetic acid than in the acetylated azide produced on reaction with acetyl chloride. Copyright © 2009 John Wiley & Sons, Ltd.     

Isomerization and rearrangement of (E)‐ and (Z)‐phenylhydrazones of 3‐benzoyl‐5‐phenyl‐1,2,4‐oxadiazole: evidence for a ‘new’ type of acid‐catalysis by copper(II) salts in mononuclear rearrangement of heterocycles

A kinetic investigation in methanol of the title reaction has evidenced the occurrence of two processes: the 1‐ E 1‐ Z isomerization and the rearrangement of the (Z)‐isomer into the relevant 4‐benzoylamino‐2,5‐diphenyl‐1,2,3‐triazole ( 1‐ Z → T ). The latter reaction is in line with the ability of the (Z)‐phenylhydrazones of 3‐benzoyl‐1,2,4‐oxadiazoles to undergo the so called mononuclear rearrangement of heterocycles (MRH). The occurrence of both the examined reactions is dependent on a Lewis‐acid‐catalysis. The obtained results have shown the possibility of a ‘new’ type of acid‐catalysis (bifunctional catalysis by Lewis salts) in the MRH. This catalysis operates through a completely different mechanism with respect to the one recently observed, and deeply investigated, in the presence of protic acids for the (Z)‐phenylhydrazone of 5‐amino‐3‐benzoyl‐1,2,4‐oxadiazole, in both dioxane/water and toluene, for which the catalytic process was dependent on the protonation of N(4) ring‐nitrogen of the 1,2,4‐oxadiazole. As a matter of fact, the copper salts seem able to interact with the >C?N? NH? C₆H₅ moiety, yielding adducts which, in some cases, are prone to both isomerize and rearrange. Therefore, a similar behaviour in some manner parallel to that already observed in benzene in the presence of aliphatic amines (base‐catalysis) has been evidenced. Copyright © 2008 John Wiley & Sons, Ltd.     

An experimental investigation of substituent effects on the formation of 2,3‐dihydroquinazolin‐4(1H)‐ones: a kinetic study

The effect of different substituents on the kinetics of the reactions between 2‐amino‐benzamide and some of benzaldehyde derivatives have been spectrally investigated in the presence of formic acid. The proposed mechanism were challenged due to the determination of rate‐determining step (RDS) and also, to obtain the general rate law of the reaction. For all substituents, the reactions followed the second‐order kinetics and the partial orders of reactions were recognized with respect to each reactant. Electron withdrawing substituents on benzaldehyde ring increased the rate of reaction. Kinetic values (k and E_a) and associated activation parameters (ΔH^?, ΔG^? and ΔS^?) of the reactions were determined. Both the Arrhenius and the Eyring equations were used to calculate activation energy. Comparison of magnitude of and T showed that the reactions were enthalpy controlled. Isokinetic plots for the reactions were plotted and linear relationship between and recognized that relative contribution of enthalpy and entropy to the overall free energy was the same in the reactions.     

Thermolysis kinetics of diethyl 2,3‐dicyano‐2,3‐di(p‐substituted phenyl)succinates

An experimental approach was developed to determine the intrinsic thermolysis rate constants of the central carbon–carbon bond during the dl/meso isomerization of diethyl 2,3‐dicyano‐2,3‐di(p‐substituted phenyl)succinates (G=H, Me, OMe, Cl, and NO₂) at temperatures ranging from 80 to 120 °C. The obtained rate constants are significantly affected by the polarity of the para substituents, in sharp contrast to their negligible effects on the dl/meso isomerization equilibrium constants. Moreover, the substituent effects on the activation enthalpies can be linearly correlated with the Hammett substituent resonance constants and the homolytic dissociation enthalpies (bond dissociation energies) of the benzylic C–H bonds of ethyl 2‐cyano‐2‐(p‐substituted phenyl)acetates. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinetic study of the formation of N‐chloro compounds using N‐chlorosuccinimide

Second‐order rate constants were determined for the chlorination reaction of 2,2,2‐trifluoethylamine and benzylamine with N‐chlorosuccinimide at 25 °C and an ionic strength of 0.5 M. These reactions were found to be of first order in both reagents. According to the experimental results, a mechanism reaction was proposed in which a chlorine atom is transferred between both nitrogenous compounds. Kinetics studies demonstrate that the hydrolysis process of the chlorinating agent does not interfere in the chlorination process, under the experimental conditions used in the present work. Free‐energy relationships were established using the results obtained in the present work and others available in the literature for chlorination reactions with N‐chlorosuccinimide, being the pK_a range included between 5.7 and 11.22. Copyright © 2014 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

Transannular additions of selectfluor and xenon difluoride: regioselectivity and mechanism

The addition of 1‐chloromethyl‐4‐fluoro‐1,4‐diazoniabicyclo[2.2.2]octane bis‐tetrafluoroborate (F‐TEDA) to unsaturated systems was modelled computationally at the ab initio levels and studied experimentally. The reaction of olefins with F‐TEDA is driven exclusively by charge transfer and displays the antibonding orbital picture in the transition structure for F‐transfer, similarly to that for the reactions of olefins with F‐radical. In contrast, the electrophilic and concerted fluorinations, respectively with H₂O???F⁺ complex and with F₂, show strong bonding interactions between the fluorine and olefin moieties in the transition structures. The reaction with F‐TEDA involves an initial formation of highly delocalized charge‐transfer complexes in the first step with further low‐barrier (ca 4 kcal) migration of fluorine and is best described as an inner‐sphere electron transfer. This nonelectrophilic mechanism is operative for the transannular addition of F‐TEDA to 3‐methylene‐7‐ethylidenebicyclo[3.3.1]nonane studied experimentally. The addition mode is determined by the formation of a more stable complex via the ethylidene fragment and demonstrates selectivities that differ from conventional electrophilic additions. This mechanistic scenario may be extended to the fluorination with xenon difluoride where similar products are formed in high yields. Copyright © 2010 John Wiley & Sons, Ltd.     

Reactions of O‐aryl S‐aryl dithiocarbonates with pyridines in aqueous ethanol: kinetics and mechanism

The reactions of O‐(4‐methylphenyl) S‐(4‐nitrophenyl) dithiocarbonate ( 1 ), O‐(4‐chlorophenyl) S‐(4‐nitrophenyl) dithiocarbonate ( 2 ), and O‐(4‐chlorophenyl) S‐phenyl) dithiocarbonate ( 3 ) with a series of pyridines were subjected to a kinetic investigation in 44 wt% ethanol–water, at 25.0 °C and an ionic strength of 0.2 M. The reactions were followed spectrophotometrically. Under amine excess, pseudo‐first‐order rate coefficients (k_obs) were determined. For the studied reactions, plots of k_obs versus free pyridine concentration at constant pH were linear, with the slope (k_N) independent of pH. The Brønsted‐type plots for ( 1 ) and ( 2 ) were biphasic, suggesting a stepwise mechanism with a change in the rate‐determining step, from breakdown to the formation of a tetrahedral intermediate (T^±), as the basicity of the pyridines increases. For the reactions of ( 3 ), at the pK_a range of the pyridines studied, only the breakdown to products of T^± was observed. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydrogen bonding and excited state properties of the photoexcited hydrogen‐bonded (E)‐S‐(2‐aminopropyl) 3‐(4‐hydroxyphenyl)prop‐2‐enethioate complexes

The time‐dependent density functional theory (TDDFT) method has been performed to investigate the excited state and hydrogen bonding dynamics of a series of photoinduced hydrogen‐bonded complexes formed by (E)‐S‐(2‐aminopropyl) 3‐(4‐hydroxyphenyl)prop‐2‐enethioate with water molecules in vacuum. The ground state geometric optimizations and electronic transition energies as well as corresponding oscillator strengths of the low‐lying electronic excited states of the (E)‐S‐(2‐aminopropyl) 3‐(4‐hydroxyphenyl)prop‐2‐enethioate monomer and its hydrogen‐bonded complexes O₁‐H₂O, O₂‐H₂O, and O₁O₂‐(H₂O)₂ were calculated by the density functional theory and TDDFT methods, respectively. It is found that in the excited states S₁ and S₂, the intermolecular hydrogen bond formed with carbonyl oxygen is strengthened and induces an excitation energy redshift, whereas the hydrogen bond formed with phenolate oxygen is weakened and results in an excitation energy blueshift. This can be confirmed based on the excited state geometric optimizations by the TDDFT method. Furthermore, the frontier molecular orbital analysis reveals that the states with the maximum oscillator strength are mainly contributed by the orbital transition from the highest occupied molecular orbital to the lowest unoccupied molecular orbital. These states are of locally excited character, and they correspond to single‐bond isomerization while the double bond remains unchanged in vacuum.     

Kinetic study on the aromatic nucleophilic substitution reaction of 3,6‐dichloro‐1,2,4,5‐tetrazine by biothiols

The aromatic nucleophilic substitution reaction of 3,6‐dichloro‐1,2,4,5‐tetrazine (DCT) with a series of biothiols RSH: (cysteine, homocysteine, cysteinyl–glycine, N‐acetylcysteine, and glutathione) is subjected to a kinetic investigation. The reactions are studied by following spectrophotometrically the disappearance of DCT at 370 nm. In the case of an excess of N‐acetylcysteine and glutathione, clean pseudo first‐order rate constants (k_obs1) are found. However, for cysteine, homocysteine and cysteinyl–glycine, two consecutive reactions are observed. The first one is the nucleophilic aromatic substitution of the chlorine by the sulfhydryl group of these biothiols (RSH) and the second one is the intramolecular and intermolecular nucleophilic aromatic substitutions of their alkylthio with the amine group of RSH to give the di‐substituted compound. Therefore, in these cases, two pseudo first‐order rate constants (k_obs1 and k_obs2, respectively) are found under biothiol excess. Plots of k_obs1 versus free thiol concentration at constant pH are linear, with the slope (k_N) independent of pH (from 6.8 to 7.4). The kinetic data analysis (Brønsted‐type plot and activation parameters) is consistent with an addition–elimination mechanism with the nucleophilic attack as the rate‐determining step. Copyright © 2014 John Wiley & Sons, Ltd.     

Relative stabilities and molecular structures of the isomeric enol ethers and carboxylic esters derived from α‐acetyl‐γ‐butyrolactone and α‐acetyl‐δ‐valerolactone

Recently recorded ¹⁷O NMR spectra of compounds studied in a previous work (Taskinen E. Acta Chem. Scand. 1985; B39 : 489–494) dealing with the thermodynamics of isomerization of the enol ethers of α‐acetyl‐γ‐butyrolactone reveal an error in compound identification, caused by an unexpected isomerization reaction during the synthetic procedure. Thus, acid‐catalyzed treatment of the lactone with HC(OR)₃ in the respective alcohol ROH is shown to lead initially to the desired enol ethers which, however, are gradually isomerized to a mixture of the enol ethers and an ester of 2‐methyl‐4,5‐dihydrofuran‐3‐carboxylic acid. As a result, only one of the two isomeric compounds detected in the previous equilibration study was the expected enol ether (the thermodynamically more stable E isomer) of α‐acetyl‐γ‐butyrolactone, while the other, dominating species was the respective carboxylic ester. In the present work, the evidence provided by the ¹⁷O NMR spectra is presented, and the relative stabilities of the isomeric compounds are discussed on the basis of computational enthalpy data. The treatment is also extended to the respective isomeric compounds derived from α‐acetyl‐δ‐valerolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

Reactions of O‐aryl S‐aryl dithiocarbonates with secondary alicyclic amines in aqueous ethanol. Kinetics and mechanism

The reactions of O‐(4‐methylphenyl) S‐(4‐nitrophenyl), O‐(4‐chlorophenyl) (4‐nitrophenyl), O‐(4‐chlorophenyl) S‐phenyl, and O‐(4‐methylphenyl) S‐phenyl dithiocarbonates ( 1 , 2 , 3 , and 4 , respectively) with a series of secondary alicyclic (SA) amines are subjected to a kinetic investigation in 44 wt% ethanol‐water, at 25.0 °C and an ionic strength of 0.2 M. The reactions are followed spectrophotometrically. Under amine excess, pseudo‐first‐order rate coefficients (k_obs) are found. For some of the reactions, plots of k_obs vs. free amine concentration at constant pH are linear but others are nonlinear upwards. This kinetic behavior is in accordance with a stepwise mechanism with two tetrahedral intermediates, one zwitterionic (T^±) and the other anionic (T^?). In some cases, there is a kinetically significant proton transfer from T^± to an amine to yield T^?. Values of the rate micro constants k₁ (amine attack to form T^±), k_?1 (its back step), k₂ (nucleofuge expulsion from T^±), and k₃ (proton transfer from T^± to the amine) are determined for some reactions. The Brønsted plots for k₁ are linear with slopes β₁ = 0.2–0.4 in accordance with the slope values found when T^± formation is the rate‐determining step. The sensitivity of log k₁ and log k_?1 to the pK_a of the amine, leaving and non‐leaving groups are determined by a multiparametric equation. For the reactions of 1 – 4 with 1‐formylpiperazine and those of 3 and 4 with morpholine the k₂ and k₃ steps are rate determining. Copyright © 2010 John Wiley & Sons, Ltd.     

Organophosphorous ligands in hydrogenase‐inspired iron‐based catalysts: A DFT study on the energetics of metal protonation as a function of P‐atom substitution

The present paper reports a study on the energetics of protonation of a hydrogenase biomimetic complex, [Fe₂(μ‐adt)(CO)₄(PMe₃)₂] (adt = N‐benzylazadithiolate), and of its homologue featuring triphenylphosphine ligands in place of trimethylphosphines. Formation of a terminal hydride on one of the Fe centres was considered first, given the key relevance of terminal hydride species in the enzymatic mechanism. Theoretical calculations highlight that, in a vacuum, terminal protonation of the selected Fe ion in the PPh₃‐bearing organometallic complex is highly favoured when compared to the analogous reaction involving the PMe₃‐containing species, but the trend is inverted in the case of models optimized in a continuum polarizable. An unexpected parallel is thus established between relative basicities of PPh₃ and PMe₃ in vacuum or in solution phase [C. A. Tolman, J. Am. Chem. Soc. 1970 , 92, 2953; G. M. Bancroft, Inorg. Chem. 1986 , 25, 3675], and the energetics of terminal hydride formation upon protonation of [FeFe]‐hydrogenase biomimetic complexes bearing such organophosphorous ligands. Bridging hydride formation was also considered in the present study: calculations showed that protonation of the PMe₃‐bearing organometallic complex is again strongly favoured in vacuo, as compared to the case of the PPh₃‐containing model. However, protonation energies become significantly smaller when solvent effects are taken into account. Such differences between protonation reactions modelled in vacuo and in the polarizable continuum are rationalized in light of the different electrostatic properties of the diiron complexes here considered. Implications for the design and modelling of biomimetic catalysts are briefly discussed in light of recent literature.     

Kinetics and related studies of the formation of 2,3‐dihydroquinazolin‐4(1H)‐ones in the presence of different benzaldehyde derivatives

The kinetics and activation parameters for the reaction between 2‐amino‐benzamide and some benzaldehyde derivatives in the presence of formic acid have been reported and discussed. A linear plot of lnk vs l/T showed that the reactions obey the Arrhenius equation. Both the Arrhenius and the Eyring equations were used to calculate the activation energy. The effect of nitro groups was studied on different positions of benzaldehyde. For all substituents, the reactions followed second‐order kinetics, and the partial orders of reactions were recognized with respect to each reactant. Comparisons between the magnitudes of ΔH^? and TΔS^?showed that the reactions were enthalpy controlled. The validity of the isokinetic relationship and the compensation effect was tested, and the isokinetic temperature (β) was obtained. A linear enthalpy‐entropy plot (ΔH^?versusΔS^?) showed that the compensation effect is established, and this process occurs via a same mechanism across a series of reactions. From the Van't Hoff and Exner's plots, the isokinetic temperature was obtained.     

Monitoring synchrotron X‐ray‐induced radiolysis effects on metal (Fe,W) ions in high‐temperature aqueous fluids

Radiolysis‐induced effects on aqueous tungsten ions are observed to form a precipitate within seconds upon exposure to a synchrotron X‐ray micro‐beam in a WO₃ + H₂O system at 873 K and 200 MPa. In situ Fe K‐edge energy‐dispersive X‐ray absorption spectroscopy (ED‐XAS) measurements were made on Fe(II)Cl₂ aqueous solutions to 773 K in order to study the kinetics of high‐temperature reactions of Fe²⁺ and Fe³⁺ ions with transient radiolysis species. The radiolytic reactions in a fluid sample within a hydrothermal diamond anvil cell result in oxidation of the Fe²⁺ ion at 573 K and reduction of Fe³⁺ at temperatures between 673 and 773 K and of the Fe²⁺ ion at 773 K. The edge‐energy drift evident in the ED‐XAS data directly reflects the kinetics of reactions resulting in oxidation and/or reduction of the Fe²⁺ and Fe³⁺ ions in the aqueous solutions at high temperatures. The oxidation and reduction trends are found to be highly consistent, making reliable determinations of reaction kinetics possible.