Electric and dielectric behavior of copper-chromium layered double hydroxide intercalated with dodecyl sulfate anions using impedance spectroscopy

The Cu₂Cr-DS-LDH hybrid was successfully prepared by the anion exchange method at room temperature. The structure, the chemical composition and the physico-chemical properties of the sample were determined using powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and inductively coupled plasma (ICP). In this work, the electrical and dielectric properties investigated are determined using impedance spectroscopy (IS) in a frequency range of 1 Hz to 1 MHz. Indeed, the Nyquist diagram modelized by an electrical equivalent circuit showed three contributions attributed respectively to the polarization of grains, grains boundaries and interface electrode-sample. This modelization allowed us to determine the intrinsic electrical parameters of the hybrid (resistance, pseudo-capacitance and relaxation time). The presence of the non-Debye relaxation phenomena was confirmed by the frequency analysis of impedance. Moreover, the evolution of the alternating current conductivity (σ_ac) studied obeys the double power law of Jonscher. The ionic conduction of this material was generated through a jump movement by translation of the charge carriers. As for the dielectric behavior of the material, the evolution of dielectric constant as a function of frequency shows relatively high values in a frequency range between 10 Hz and 1 KHz. The low values of the loss tangent obtained in this frequency zone can valorize this LDH hybrid.     

Detergent-associated solution conformations of helical and beta-barrel membrane proteins

Membrane proteins present major challenges for structural biology. In particular, the production of suitable crystals for high-resolution structural determination continues to be a significant roadblock for developing an atomic-level understanding of these vital cellular systems. The use of detergents for extracting membrane proteins from the native membrane for either crystallization or reconstitution into model lipid membranes for further study is assumed to leave the protein with the proper fold with a belt of detergent encompassing the membrane-spanning segments of the structure. Small-angle X-ray scattering was used to probe the detergent-associated solution conformations of three membrane proteins, namely bacteriorhodopsin (BR), the Ste2p G-protein coupled receptor from Saccharomyces cerevisiae, and the Escherichia coli porin OmpF. The results demonstrate that, contrary to the traditional model of a detergent-associated membrane protein, the helical proteins BR and Ste2p are not in the expected, compact conformation and associated with detergent micelles, while the beta-barrel OmpF is indeed embedded in a disk-like micelle in a properly folded state. The comparison provided by the BR and Ste2p, both members of the 7TM family of helical membrane proteins, further suggests that the interhelical interactions between the transmembrane helices of the two proteins differ, such that BR, like other rhodopsins, can properly refold to crystallize, while Ste2p continues to prove resistant to crystallization from an initially detergent-associated state.     

On the dielectric relaxation of biological cell suspensions: the effect of the membrane electrical conductivity

Due to the mismatch of the electrical parameters (the permittivity ?' and the electrical conductivity σ) of the membrane of a biological cell with the ones of the cytosol and the extracellular medium, biological cell suspensions are the site, under the influence of an external electric field, of large dielectric relaxations in the radiowave frequency range. However, a point still remains controversial, i.e., whether or not the value of membrane conductivity σ(s) might be extracted from the de-convolution of the dielectric spectra or otherwise if it would be more reasonable to assign to the membrane conductivity a value equal to zero. This point is not to be considered with superficiality since it concerns an a priori choice which ultimately influences the values of the electrical parameters deduced from this technique. As far as this point is concerned, the opinion of the researchers in this field diverges. We believe that, at least within certain limits, the membrane conductivity can be deduced from the shape of the relaxation spectra. We substantiate this thesis with two different examples concerning the first a suspension of human normal erythrocyte cells and the second a suspension of human lymphocyte cells. In both cases, by means of an accurate fitting procedure based on the Levenberg-Marquardt method for complex functions, we can evaluate the membrane conductivity σ(s) with its associated uncertainty. The knowledge of the membrane electrical conductivity will favor the investigation of different ion transport mechanisms across the cell membrane.     

Microwave dielectric permittivity and relaxation for aqueous potassium trifluoroacetate solutions

The results of microwave dielectric measurements in aqueous potassium trifluoroacetate solutions at seven frequencies (ranging within 7.5–25 GHz) at 288, 298, and 308 K are presented. Static dielectric constants, dielectric relaxation times and activation parameters are calculated. The H-bond network in potassium trifluoroacetate solutions is shown to experience molecular-kinetic stabilization and an increase in connectivity and structuring, which are similar to those experienced by water in potassium acetate solutions. These changes are associated with the hydrophobic hydration of trifluoroacetate ion, which was first determined by microwave dielectric spectroscopy and arises from the effect of the low-polarity CF₃ group of trifluoroacetate ion.     

Shear and dielectric responses of propylene carbonate, tripropylene glycol, and a mixture of two secondary amides

Propylene carbonate and a mixture of two secondary amides, N-methylformamide and N-ethylacetamide, are investigated by means of broadband dielectric and mechanical shear spectroscopy. The similarities between the rheological and the dielectric responses of these liquids and of the previously investigated tripropylene glycol are discussed within a simple approach that employs an electrical circuit for describing the frequency-dependent behavior of viscous materials. The circuit is equivalent to the Gemant-DiMarzio-Bishop model, but allows for a negative capacitive element. The circuit can be used to calculate the dielectric from the mechanical response and vice versa. Using a single parameter for a given system, good agreement between model calculations and experimental data is achieved for the entire relaxation spectra, including secondary relaxations and the Debye-like dielectric peak in the secondary amides. In addition, the predictions of the shoving model are confirmed for the investigated liquids.     

Fabrication of highly insulating tethered bilayer lipid membrane using yeast cell membrane fractions for measuring ion channel activity

A tethered bilayer lipid membrane (tBLM) was fabricated on a gold electrode using 1,2-dipalmitoyl-sn-glycero-phosphothioethanol as a tethering lipid and the membrane fractions of Saccharomyces pombe yeast cells to deposit the upper leaflet. The membrane fractions were characterized using transmission electron microscopy and dynamic light scattering and found to be similar in size to small unilamellar vesicles of synthetic lipids. The dynamics of membrane-fraction deposition and rupture on the tethering-lipid layer were measured using quartz crystal microgravimetry. The electrochemical properties of the resulting tBLM were characterized using electrical impedance spectroscopy and cyclic voltammetry. The tBLM's electrical resistance was greater than 1 MOmegacm(2), suggesting a defect-free membrane. The suitability of tBLM produced using membrane fractions for measuring ion-channel activities was shown by a decrease in membrane resistance from 1.6 to 0.43 MOmegacm(2) following addition of gramicidin. The use of membrane fractions to form high-quality tBLM on gold electrodes suggests a new approach to characterize membrane proteins, in which the upper leaflet of the tBLM is deposited, and overexpressed membrane proteins are incorporated, in a single step. This approach would be especially useful for proteins whose activity is lost or altered during extraction, purification, and reconstitution, or whose activities are strongly influenced by the lipid composition of the bilayer.     

Surface modification of acrylate intraocular lenses with dielectric barrier discharge plasma at atmospheric pressure

Surface modification with dielectric barrier discharge (DBD) plasma was carried out at atmospheric pressure (argon as the discharge gas) to improve the biocompatibility of hydrophobic acrylate intraocular lens (IOL). Changes of the plasma-treated IOL surface in chemical composition, morphology and hydrophilicity were comprehensively evaluated by X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and water contact angle (WCA) measurements. The surface biocompatibility of the untreated and plasma-treated IOLs was compared with the adhesion behavior of platelets, macrophages and lens epithelial cells (LECs) in vitro. After DBD plasma treatment, the hydrophilicity of the IOL surface was obviously improved. The changes in WCA with treatment extension may be attributed to both the introduction of oxygen or/and nitrogen-containing polar groups and the increase of surface roughness induced by plasma etching effect. The existence of low molecular weight oxidized material (LMWOM) was proved on the plasmatreated IOL which was caused by the chain scission effect of the plasma treatment. The plasma-treated IOLs resisted the adhesion of platelets and macrophages significantly. The LECs spreading and proliferation were postponed on the IOLs plasma-treated for more than 180 s, with a well maintained epithelial phenotype of LECs. The IOL biocompatibility was improved after the DBD plasma treatment. We speculate that slighter foreign-body reaction and later incidence of anterior capsule opacification (ACO) may be expected after implantation of the argon DBD plasma-treated IOL. Supported by the Zhejiang Natural Science Foundation of China (Grant No. 2004C23003)     

A novel technique to measure the surface electrical potential of polymer films by using dielectric spectroscopy

A novel method that allows the determination of the electrical potential of a polymer surface has been applied for polypropylene film treated by N₂ + H₂ cold plasma. The plasma treatment results in formation on the film surface of NH₂ groups, which then gets transformed to NH₃⁺ in contact with an electrolyte and leads to the formation of an electrical double layer. The method consists of theoretical calculation of electrical model potential, using the measurement of the electrical capacitance of the film in contact with an electrolyte by dielectric spectroscopy. Comparison with the results obtained by theoretical model shows similar dependencies of the electrical potential as a function of amino‐groups density and electrolyte concentration, but systematic differences of absolute values are observed. Copyright © 2005 John Wiley & Sons, Ltd.     

Dielectric Analysis of Dynamic Fouling Behavior on Surface of Polyethersulfone Composite Ultrafiltration Membrane

A dielectric analysis model for the fouling layer on the polyethersulfone composite ultrafil-tration (UF) membrane and solution system, which consists of the solution, concentration polarization layer (CPL), and cake layer, was established by virtue of the interfacial polar-ization and the electrostatic field theory. The effect of some important parameters, such as the depth, conductivity of CPL, and cake layer, on the dielectric spectroscopy (or dielectric relaxation properties) of the UF system was discussed by the parameter sensitivity analy-sis and the dielectric measurement. The simulations indicate that the CPL can be created rapidly and the cake layer formation is the dynamic balance process of growth and erosion in the process of UF. The key factor affecting on the dielectric spectrum of UF system is the electrical properties of the CPL and the cake layer. In comparison to the results of dielectric measurement, the simulations indicate that the model proposed in this work is valid and reliable to some degree for describing and explaining the dielectric relaxation phenomenon in UF system. It is very important to further understand the fouling behavior of membrane surface and optimize the controlling techniques of membrane fouling in the process of UF.     

Deconvolution of the dielectric spectra of microbial cell suspensions using multivariate calibration and artificial neural networks

Dielectric spectroscopy at radiofrequencies has been widely used for the on-line and real-time estimation of cellular biomass. However, the presence of substantial amounts of non-biomass insoluble solids, such as wheatgerm, may interfere with these measurements in certain industrial media. Dielectric spectroscopy was combined with artificial neural networks (ANNs) to provide an estimation of the cellular biomass present in suspensions of yeast that had been contaminated in some cases with much higher concentrations of wheatgerm, so as to deconvolute the dielectric properties of the mixtures. It was found that an ANN, trained by backpropagation on the dielectric spectra produced by suspensions of varying amounts of yeast and wheatgerm, was able successfully to predict both yeast and wheatgerm content from unseen mixture data. Multivariate statistical methods, such as partial least squares (PLS) and principal component regression (PCR), could also be used successfully to deconvolute such dielectric spectra. It is concluded that such methods provide a powerful adjunct to the conventional quantitative analyses of dielectric data.     

Evidence that Pulsed Electric Field Treatment Enhances the Cell Wall Porosity of Yeast Cells

The application of rectangular electric pulses, with 0.1–2 ms duration and field intensity of 2.5–4.5 kV/cm, to yeast suspension mediates liberation of cytoplasmic proteins without cell lysis. The aim of this study was to evaluate the effect of pulsed electric field with similar parameters on cell wall porosity of different yeast species. We found that electrically treated cells become more susceptible to lyticase digestion. In dependence on the strain and the electrical conditions, cell lysis was obtained at 2–8 times lower enzyme concentration in comparison with control untreated cells. The increase of the maximal lysis rate was between two and nine times. Furthermore, when applied at low concentration (1 U/ml), the lyticase enhanced the rate of protein liberation from electropermeabilized cells without provoking cell lysis. Significant differences in the cell surface of control and electrically treated cells were revealed by scanning electron microscopy. Data presented in this study allow us to conclude that electric field pulses provoke not only plasma membrane permeabilization, but also changes in the cell wall structure, leading to increased wall porosity.     

Study of dielectric and ac impedance properties of citrate-gel synthesized Li0.35Zn0.3Fe2.35O4 ferrite

Nano-crystals of Li_0.35Zn_0.3Fe_2.35O₄ ferrite have been synthesized using citrate precursor method. The sample synthesized was sintered at different temperatures in order to vary their crystallite size. The average crystallite size was found in the range 24?C57?nm by varying the temperature from 300 to 1,100?°C. X-ray diffraction measurements confirmed the formation of cubic spinel structure at all the sintering temperatures in this work. The high frequency performance of the ferrite samples were estimated by measuring the frequency dispersion of the dielectric constant, dielectric loss and ac electrical conductivity. The dielectric constant has been observed to show normal behavior with frequency and decreases with the decrease in crystallite size. It is also observed that decrease in dielectric constant depends on sintering temperature because of lithium evaporation at higher temperature. A low value of dielectric constant and dielectric loss has been found, which makes them applicable for high frequency applications by decreasing the skin effect. The impedance spectroscopy technique has been used to study the effect of grain and grain boundary on the electrical properties of Li_0.35Zn_0.3Fe_2.35O₄ ferrite. The analysis of data shows only one semi-circle corresponding to the grain boundary volume suggesting that the conduction mechanism takes place predominantly through grain boundary volume in the prepared samples.     

Spectroscopic investigations of high-power laser-induced dielectric breakdown in gas mixtures containing carbon monoxide

Large-scale plasma was created in gas mixtures containing carbon monoxide by high-power laser-induced dielectric breakdown (LIDB). The composition of the mixtures used corresponded to a cometary and/or meteoritic impact into the Earth's early atmosphere. A multiple-centimeter-sized fireball was created by focusing a single 85 J, 450 ps near-infrared laser pulse into the center of a 15 L gas cell. The excited reaction intermediates that formed in various stages of the LIDB plasma chemical evolution were investigated by optical emission spectroscopy (OES) with temporal resolution. Special attention was paid to any OES signs of molecular ions. However, carbon monoxide cations were registered only if their production was enhanced by Penning ionization, i.e., excess He was added to the CO. The chemical consequences of laser-produced plasma generation in a CO-N 2-H 2O mixture were investigated using high resolution Fourier-transform infrared absorption spectroscopy (FTIR) and gas chromatography (GC). Several simple inorganic and organic compounds were identified in the reaction mixture exposed to ten laser sparks. H 2 (18)O was used to avoid possible contamination. The large laser spark triggered more complex reactivity originating in carbon monoxide than expected, when taking into account the strong triple bond of carbon monoxide causing typically inefficient dissociation of this molecule in electrical discharges.     

Effect of change in the physical properties of water at its peculiar temperature points on the dielectric behavior of sodium polyacrylate

The behavior of sodium polyacrylate is studied via broadband dielectric spectroscopy. The non-Debye response in the frequency range 0.1 Hz–1.0 MHz, the non-Markovian dispersion in the infralow-frequency range, and the anomalies of dielectric permittivity and ac conductivity near “peculiar” temperatures of water (20, 35, 50, and 75°C) are ascertained experimentally. These facts make it possible to assign sodium polyacrylate to disordered media, in which the temperature behavior of dielectric parameters is described by the Kohlrausch–Williams–Watts relaxation function.     

The RING Domain of the Scaffold Protein Ste5 Adopts a Molten Globular Character with High Thermal and Chemical Stability

Ste5 is a scaffold protein that controls the pheromone response of the MAP‐kinase cascade in yeast cells. Upon pheromone stimulation, Ste5 (through its RING‐H2 domain) interacts with the β and γ subunits of an activated heterodimeric G protein and promotes activation of the MAP‐kinase cascade. With structural and biophysical studies, we show that the Ste5 RING‐H2 domain exists as a molten globule under native buffer conditions, in yeast extracts, and even in denaturing conditions containing urea (7 M ). Furthermore, it exhibits high thermal stability in native conditions. Binding of the Ste5 RING‐H2 domain to the physiological Gβ/γ (Ste4/Ste18) ligand is accompanied by a conformational transition into a better folded, more globular structure. This study reveals novel insights into the folding mechanism and recruitment of binding partners by the Ste5 RING‐H2 domain. We speculate that many RING domains may share a similar mechanism of substrate recognition and molten‐globule‐like character.     

Monitoring of water content and water distribution in ischemic hearts

We determined water content and water distribution by fitting dielectric spectra of ischemic canine hearts between 5 MHz and 3 GHz with a newly developed model which describes heart cells and subcellular organelles as rotational ellipsoids filled with electrolyte enclosed by an isolating membrane. The fraction of dry material is modelled by spherical particles with a small dielectric permittivity. Free model parameters were water content, cell volume fraction, and the conductivity of the electrolytes. Resulting model parameters were compared to data from tissue desiccation and to conductivity changes produced by protons and lactate ions. We investigated hearts in two states: during ischemia after interruption of blood flow (pure ischemia, PI, n=5) and during ischemia after resuscitation with Tyrode's solution (IAR, n=14).The difference between water content determined by tissue desiccation and by dielectric spectroscopy was less than 0.5%. During 360 min of ischemia, water content in IAR decreased from 85+/-1.6% to 83+/-2.2% and in PI from 80+/-0.8% to 78+/-1.5%. Cellular volume fraction in IAR increased from 0.47+/-0.045 to 0.63+/-0.031 and in PI from 0.62+/-0.014 to 0.73+/-0.013, which is consistent with published morphometric data. After 180 min of ischemia, the increase of the cytosolic conductivity was 0.14+/-0.02 S/m as calculated from the dielectric spectrum and was similar to the conductivity increase which was roughly estimated on the basis of tissue lactate concentration.In conclusion, dielectric spectroscopy combined with our model analysis facilitates the monitoring of water content and distribution by means of nondestructive surface probes.     

Study of structural,electrical and dielectric behavior of cadmium selenide quantum dots/polyaniline nanocomposites

In this study, the cadmium selenide quantum dots/polyaniline nanocomposites were prepared by in-situ polymerization technique and they were characterized using X-ray diffraction and Fourier transform infrared spectroscopy. The surface morphology was studied by scanning electron microscopy. The electrical and dielectric properties were investigated by using 4-probe mechanism and LCR meter respectively. The increase in dielectric constant was observed with the increase of quantum dots content in the nanocomposites. The frequency dependent AC conductivity followed the universal power law. The temperature dependent DC conductivity was found to be a typical for a semiconducting behavior following Mott’s 1D variable range hoping model.     

Structural and dielectric properties of POSS reinforced polyimide nanocomposites

In this study, a series of [3-(2-aminoethyl)amino]propyl-heptaisobutyl substituted polyhedral oligomeric silsesquioxane (AHIP) containing polyimide (PI) nanocomposites were successfully prepared. Structural, thermal and electrical properties of the polyimide nanocomposites were studied. The properties of AHIP containing polyimides were compared with those of the neat polyimide films. The surface morphology of the prepared AHIP containing polyimides were determined by using Scanning Electron Microscopy (SEM). The hydrophilic/hydrophobic nature of AHIP/polyimide composites were analyzed by measuring their water contact angles. It was found that the addition of AHIP into the polyimide slightly increased the contact angle values. The incorporation of 5% AHIP to the PI matrix decreased the dielectric constant value of pure PI from 8.6 to 11.7, respectively. Furthermore he dielectric permittivity was changed from 8.6 (neat polyimide) to 5.5 (PI3).     

Gate dielectric chemical structure-organic field-effect transistor performance correlations for electron, hole, and ambipolar organic semiconductors

This study describes a general approach for probing semiconductor-dielectric interfacial chemistry effects on organic field-effect transistor performance parameters using bilayer gate dielectrics. Organic semiconductors exhibiting p-/n-type or ambipolar majority charge transport are grown on six different bilayer dielectric structures consisting of various spin-coated polymers/HMDS on 300 nm SiO(2)/p(+)-Si, and are characterized by AFM, SEM, and WAXRD, followed by transistor electrical characterization. In the case of air-sensitive (generally high LUMO energy) n-type semiconductors, dielectric surface modifications induce large variations in the corresponding OTFT performance parameters although the film morphologies and microstructures remain similar. In marked contrast, the device performance of air-stable n-type and p-type semiconductors is not significantly affected by the same dielectric surface modifications. Among the bilayer dielectric structures examined, nonpolar polystyrene coatings on SiO(2) having minimal gate leakage and surface roughness significantly enhance the mobilities of overlying air-sensitive n-type semiconductors to as high as approximately 2 cm(2)/(V s) for alpha,omega-diperfluorohexylcarbonylquaterthiophene polystyrene/SiO(2). Electron trapping due to silanol and carbonyl functionalities at the semiconductor-dielectric interface is identified as the principal origin of the mobility sensitivity to the various surface chemistries in the case of n-type semiconductors having high LUMO energies. Thiophene-based n-type semiconductors exhibiting similar film morphologies and microstructures on various bilayer gate dielectrics therefore provide an incisive means to probe TFT performance parameters versus semiconductor-dielectric interface relationships.     

Real-time monitor on the release of salicylic acid from chitosan gel beads by means of dielectric spectroscopy

The release processes of salicylic acid (SA) from the chitosan gel beads (CGB) with different crosslinking densities were monitored in real time by means of dielectric spectroscopy. Distinct dielectric relaxations attributed to interfacial polarization were observed, which exhibited obvious dependences on the crosslinking density and the release time. In line with Hanai’s equation, the properties of CGB and release media were quantitatively determined from the dielectric profiles. Based on these properties and dielectric behaviors, the release profiles were analyzed. It was found that only the dispersion of CGB with the lowest crosslinking density exhibited release behavior, while other dispersions showed an obvious adsorption process following a burst of drug diffusion. The total loading and release amount of SA were determined and compared, and the influence of crosslinking degree on the drug loading and release was discussed. In addition, the release behavior was confirmed to be diffusionally controlled, and the diffusion coefficient of SA was determined.