Aqueous polymerization of methacrylamide

The aqueous polymerization of methacrylamide (I) initiated by KBrO₃–thioglycolic acid (TGA) has been studied at 30 ± 0.2°C in nitrogen. The rate is given by K[M]^1.19 [thioglycolic acid]¹ [KBrO₃]^0.53 for 10–15% conversion. Activation energy was found to be 53.96 kJ/mole (12.92 kcal/mole) in the investigated range of temperature 30–45°C. The role of addition of a series of aliphatic alcohols and some salts was also determined. The kinetics of polymerization was followed iodometrically.     

Studies on electron transfer reactions: reduction of heteropoly 11-tungstophosphovanadate(V) by <Emphasis Type="SmallCaps">l</Emphasis>-cysteine and thioglycolic acid in aqueous acid medium

The rates of the electron transfer reaction of l-cysteine and thioglycolic acid with the polyoxometalate, [PV^VW₁₁O₄₀]⁴⁻, have been measured spectrophotometrically in aqueous acid medium. The polyoxometalate oxidizes cysteine to cystine and thioglycolic acid to dithioglycolic acid and gets reduced to heteropoly blue, [PV^IVW₁₁O₄₀]⁵⁻. The order of the reaction with respect to oxidant is one, whereas the reaction shows second order dependence on the substrates. The rate–pH profile shows that both the unionized and ionized thiol groups of the substrates are active species involved in electron transfer. A suitable mechanism has been proposed for the title reaction based on the results of kinetic studies.     

Kinetics and Mechanism of the Interaction of Di-μ-hydroxobis(1,10-phenanthroline)dipalladium(II) Perchlorate with Thioglycolic Acid and Glutathione in Aqueous Solution

The kinetics of interaction between di-μ-hydroxobis(1,10-phenanthroline)dipalladium(II) perchlorate and thioglycolic acid and with glutathione has been studied spectrophotometrically in aqueous medium as a function of the complex concentration as well as the ligand concentrations, pH, and temperature at constant ionic strength. The observed pseudo-first-order rate constants k _obs (s^?1) obeyed the equation k _obs = k ₁[Nu] (Nu = nucleophile). At pH = 6.5, the interaction with thioglycolic acid shows two distinct consecutive steps and both steps are dependent on the concentration of thioglycolic acid. The rate constants for the process are: k ₁ ≈ 10^?5 s^?1 and k ₂ ≈ 10^?3 dm³ · mol^?1 · s^?1. The association equilibrium constant (K _E) for the outer sphere complex formation has been evaluated together with the rate constants for the two subsequent steps. The other bio-active ligand, glutathione, showed a single step reaction depending on [ligand] with a second-order anation rate constant: the 10² (k ₂) values are (61.72, 79.20, 109.24 and 154.33) dm³ · mol^?1 · s^?1 at 20, 25, 30 and 35 °C, respectively. On the basis of the kinetic observations and evaluated activation parameters, plausible associative mechanisms are proposed for both interaction processes.     

Spectroscopic behavior of cationic metallophthalocyanines in the presence of anionic quantum dots

The interactions and spectroscopic properties between cationic zinc phthalocyanine derivatives (peripherally and non-peripherally tetrasubstituted and peripherally octa substituted with 2-diethylmethylaminoethylsulfanyl (βTZnPc, αTZnPc and βOZnPc)) and CdTe core quantum dots (QDs) capped with mercaptopropionic acid or thioglycolic acid (represented as CdTe@MPA and CdTe@TGA, respectively) have been studied in methanol:water mixture. Strong coupling of MPcs was deduced from the interaction since the UV–vis spectroscopic studies of the ground state complex formed on mixing both components showed loss of the phthalocyanine monomeric band with the formation of a dimeric band (spectrum of aggregated species). The dimerization constants were of the order of 10⁴ M^?1.     

Studies on ceric–thiol-initiated aqueous vinyl polymerization with particular reference to end groups in poly(methyl methacrylate)

Ceric-thiol systems are good initiators for the acid aqueous polymerization of some water-soluble Vinyl monomers although not for styrene (in aqueous emulsion) and vinyl acetate. Thiols used are 2-mercaptoethanol, thioglycolic acid, 2-mercaptoethylamine hydrochloride, and L -cysteine hydrochloride. The polymerization proceeds through a radical mechanism. End-group analysis of poly(methyl methacrylate) obtained by initiation with various ceric-thiol systems has been carried out using Palit's dye testes. Hydroxyl, carboxyl, and amine end groups (to the extent of about one per polymer molecule) were incorporated in poly(methyl methacrylate)s obtained by initiation with 2-mercaptoethanol, thioglycolic acid, and 2-mercaptoethylamine hydrochloride, respectively, each in combination with Ce⁴⁺ ions; both amine and carboxyl end groups were obtained using C⁴⁺/L -cysteine hydrochloride initiator system. From the end-group results, the initiating species have been identified and the initiation mechanism prooposed. The probable termination mechanism also has been discussed.     

Doping-induced emission of infrared light from Co2+-doped ZnSe quantum dots

ZnSe quantum dots doped with Co²⁺ have been prepared in aqueous solution by a one-pot method using thioglycolic acid as stabilizer. The quantum dots were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), UV?Cvisible spectrophotometry, and spectrofluorimetry. The results confirmed the quantum dots formed a single cubic phase with zinc blende structure. The average particle size of the quantum dots was approximately 5 nm. Co²⁺ ions were doped into ZnSe lattice sites by substitution. As a result, infrared (IR) emission of Co^{2+ 4}T₂(F) ?? ⁴A₂(F) at approximately 3.5 ??m was detected on excitation with 755 nm radiation.     

Quantitative spectrophotometric and EPR-determination of 1,1-diphenyl-2-picryl-hydrazyl (DPPH)

A first simultaneous EPR- and VIS-spectrophotometric study is reported on the interaction of the stable free radical 1,1-diphenyl-2-picryl-hydrazyl (DPPH) dissolved in ethanol with thioglycolic acid (HSCH₂CO₂H, TGA). The results of the kinetic studies at room temperature permit to assume 1:1 stoichiometry of the reaction between DPPH and TGA giving 1,1-diphenyl-2-picryl-hydrazine (DPPH₂) and thioglycolic disulphide. The linear plots of EPR- and UV/Vis responses vs. the quantity of added TGA are used to find the DPPH molar absorptivity at 520 nm to be 12350 ± 3% l · mol^–1· cm^–1 which may be used as a criterion for the purity of the material itself. It was also found that the paramagnetic and optical properties of a 30 year old sample give results suggesting that in the solid state DPPH is a fairly stable material. Received: 12 October 1996 / Revised: 6 December 1996 / Accepted: 12 December 1996     

Oxidative polymerization of acrylamide in the presence of thioglycolic acid

Chemical polymerization of acrylamide at room temperature was examined by using thioglycolic acid-cerium (IV) sulfate and thioglycolic acid-KMnO₄ redox systems in acid aqueous medium. Water soluble polyacrylamides containing thioglycolic acid end groups were synthesized. The effects of the molar ratio of acrylamide to Ce(IV) n _AAm /n _Ce(IV) , the polymerization time, the temperature, the monomer concentration, the molar ratio of cerium (IV) sulfate to thioglycolic acid and the concentration of sulfuric acid on the yield and molecular weight of polymer were investigated. Lower molar ratios of acrylamide/Ce(IV) at constant monomer concentration resulted in an increase in the yield but a decrease in molecular weight of polymer. The increase of reaction temperature from 20 to 70°C resulted in a decrease in the yield but generally resulted in a constant value for the molecular weight of polymer. With increasing polymerization time, the yield and molecular weight of polymer did not change substantially. Ce(IV) and Mn(VII) ions are reduced to Ce(III) and Mn(II) ions respectively in the polymerization reaction. The existence of Ce(III) ion bound to polymer was investigated by UV-visible spectrophotometry and fluoresce measurements. The amount of Mn(II) incorporated into the polymer was determined using graphite furnace atomic absorption spectrometry. The mechanism of this phenomenon is discussed.     

Investigation of the effects of various parameters on the synthesis of oligopeptides in aqueous solution

Oligomerization efficiency of amino acids in aqueous solution has been compared under different conditions (temperature, activating agent, etc.) using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and 1,1^′-carbonyldiimidazole (CDI) as coupling agents. Glycine (H₂N-CH₂-COOH) and α-alanine (H₂N-CH(CH₃)-COOH) were chosen as α-amino acids and β-alanine (H₂N-CH₂-CH₂-COOH) as the β-amino acid. The coupling reaction between EDC and glycine was shown to occur but does not go to completion either at ambient temperature or at 70 °C. The presence of a carboxylic activating agent such as N-hydroxysuccinimide improves the EDC-mediated coupling reaction, and the amino acid structure (α- or β-) was shown to have an influence on the oligomerization efficiency, with β-alanine polymerisation being more efficient. These findings are explained by reference to the reaction mechanism.     

KINETICS AND MECHANISM OF COMPLEX FORMATION BETWEEN [PtCl(DIEN)]+ AND THIOLS AND THIOETHERS

Abstract

Reactions of the monofunctional platinum(II) complex, [PtCl(dien)]⁺, with different thiols and thioethers, including biologically important molecules, have been studied as a function of temperature (288.2–308.2K) using conventional electronic spectrophotometry in 0.10 M aqueous hydrochloric acid and by ¹H NMR spectroscopy. The second-order rate constants, k₂, are similar, varying between 1.43 × 10^?3 and 46.1 × 10^?3 M^?1s^?1 at 25°C. The reactivity follows the sequences: D-penicillamine ≤ L-cysteine ≤ glutathione ≤ thiodiglycolic acid ≤ thioglycolic acid ≤ L-methionine ≤ S-methylthioglycolic acid ≤ glycyl-D,L-methionine. However, variation in size, bulkiness and solvation of the entering ligands reflect in their properties as nucleophiles. Large negative values of the entropy of activation (ΔS≠), between ?140 and ?190 J K^?1 mol^?1, indicate that all thiols and thioethers react via the same associative mechanism. Results have been analyzed in relation to the antitumor activity and toxicity of platinum(II) complexes.     

Thermodynamics of mixture of boric acid with lithium borate and chloride

The first thermodynamic dissociation constants of boric acid in aqueous solution of lithium chloride with borate at five different temperatures from 278.15 to 318.15 K were evaluated from emf values of the cell without liquid junction potential with the improved extrapolation and polynomial approximation on the basis of Pitzer's theory. Values obtained from both methods are in good agreement with each other. Pitzer's parameters β(0) and β(1) of LiB(OH)4 and other thermodynamic quantities of dissociation process of boric acid are obtained. Results have been discussed.     

Water-insoluble β-cyclodextrin polymer crosslinked by citric acid: synthesis and adsorption properties toward phenol and methylene blue

Water-insoluble β-cyclodextrin polymer (β-CDP) crosslinked by citric acid was obtained with a yield of 65% through an environment friendly synthesis procedure. FT-IR spectra disclosed that the hydroxyl groups of β-CD had reacted and condensated with the carboxyl groups of citric acid, and at the same time the structural characteristics of β-CD were essentially maintained in β-CDP. The β-CDP exhibited notable adsorption capability toward phenol (q _max = 13.8 mg g^?1) and especially large adsorption capability toward methylene blue (q _max = 105 mg g^?1). The concentration of methylene blue in water could be reduced to 0.11 mg L^?1 by the β-CDP, indicating the excellent adsorption sensitivity of β-CDP toward methylene blue. The adsorption results disclosed that the interior cavity and inclusion property of β-CD were maintained in the synthesized β-CDP.     

A potentiometric and spectrophotometric study of gallium—benzohydroxamic acid complex formation

The complex formation of gallium with benzohydroxamic acid has been studied by potentiometry and spectrophotometry. Three successive complexes, GaL²⁺, GaL₂⁺, and GaL₃, are formed. The stability constants, log β₁, β₂, and β₃ , are 9.2 ± 0.1, 18.0 ± 0.1 and 25.3 ± 0.1, respectively, in 3 M NaClO₄ at 25°C.     

Contributions to the synthesis of some ferrocene-containing antibiotics

This Review discusses the synthesis and characterization by our Group of new antibiotics belonging to the class of penicillins, cephalosporins and rifamycins with ferrocenyl and 1, 1′-ferrocenilene residues in the molecule. As reactants for 6-aminopenicillanic acid (6-APA) and 7-aminocephalosporanic acid (7-ACA) the following were used: 1, 1-bis(chlorocarbonyl)ferrocene, ferrocenyl sulfochloride, 1, 1′-ferrocenylenedisulfochloride and thioglycolic acids S-modified with ferrocene. In the synthesis of rifamycins, the hydrazides of the thioglycolic acids, S-modified with ferrocene, were employed as nucleophilic agents. The synthesized intermediates were characterized by elemental analysis, TLC, IR, UV and ¹H NMR spectra. The characterization of new antibiotics was made by TLC, IR and UV spectral analysis. Biological activity was tested on Gram-negative and Gram-positive bacteria. Good activity is reported towards Gram-positive bacteria in the case of derivatives containing residues of thioglycolic acid S-modified with ferrocene, the antibacterial activity being similar to that of amoxicillin, carbenicillin and cephalothin. All compounds are inactive towards Gram-negative bacteria.     

Sodium N-chloro-p-nitrobenzenesulfonamide (chloramine-N) as a new redox titrant: I. The status of chloramine-N as a titrimetric reagent

The status of sodium N-chloro-p-nitrobenzenesulfonamide (chloramine-N) as a new redox titrant is examined. Analytical applications of CAN as a potential titrimetric reagent in the direct determination of diverse reducing agents such as glutathione, thioglycolic acid, thiourea, ascorbic acid, methionine, sulfite, and arsenite have been described. CAN has been synthesized and its structure elucidated from the spectral data and elemental analyses. The ultraviolet and infrared spectra and Fourier transform ¹H and ¹³C nuclear magnetic resonance spectral data have been presented.     

Optimized Synthesis and Fluorescence Spectrum Analysis of CdSe Quantum Dots

An optimized synthesis route was applied for controlling the preparation of CdSe quantum dots (QDs) in an aqueous solution. Some key factors which influencing the properties of CdSe QDs, such as initial pH, stabilizers, ratio of precursor, etc. were investigated. The size, shape, crystal structure, and optical property of CdSe QDs were also characterized by TEM, XRD, UV-Vis, and fluorescence (FL) spectra. The result showed that high-quality cubic CdSe QDs with 3 nm were obtained. The experiments also confirmed that thioglycolic acid (TGA), under the conditions of weak acid, is a better stabilizer than others. The ratio of [Cd²⁺] to [SeSO₃ ^2?] played an important role in the formation of CdSe QDs. The mechanisms about the influence factors were also presented.     

Methylmercury(II) complexes with 2-mercaptopyridinecarboxylic acids

The stability constants of the complexes [MeHgL]^?(H₂L = 2-mercaptopyridine-3-carboxylic acid, 2-mercaptopyridine-4-carboxylic acid, 2-mercaptopyridine-5-carboxylic acid and 2-mercaptopyridine-6-carboxylic acid) have been obtained by differential pulse polarography. The values of log β₁ are in the range 14.14–14.96 at 20°C and ionic strength 0.1 mol dm^?3. The complexes MeHgHL have been isolated and characterized by chemical analysis and mass and IR spectrometry.     

Hydrophile Polymergele mit reaktiven Gruppen, 4. Mitt.: Chelatharze mit schwefelhaltigen Ankergruppen auf Basis von Saccharosemethacrylaten

Chelating resins with thioglycolate anchor groups have been synthesized by reaction of sucrosemethacrylate gels with thioglycolic acid. The capacities of the gels were found to be extremely high for Ag⁺ (5,3 mmol/g) and Hg²⁺ (4,9 mmol/g). About 1 mmol Hg²⁺/g could be recovered from the gel reversibly by treatment with hydrochloric acid. The removal of Hg²⁺ from aqueous 3M alkalichloride solutions was possible with capacities of 1 mmol/g.Sucrosemethacrylate gels with primary aromatic amino group were reacted with CS₂/NH₃ to yield gels with dithiocarbamate groups. Gels with thiorea groups were prepared by reaction of the amino groups with NH₄SCN/HCl. Diazotation of the amino groups, subsequent reaction with potassium xanthogenate and hydrolysis afforded gels with thiol groups. Thiol containing gels were synthesized also by reaction of the diazotised gels with Na₂S₂ and subsequent reduction with Na₂S. Reaction of the diazotised gels with mercaptans yielded resins with thioether anchor groups. The capacities of the sulfur containing gels were found to be max. 4,1 mmol/g for Hg²⁺ and 5,9 mmol/g for Ag⁺. About 35% of the bonded Hg²⁺ could be eluted resersibly with 3N-HCl.

     

Komplexbildung und photometrische Bestimmung von Wolfram(VI) mit Thioglykols?ure und verwandten Chelatbildnern

Zusammenfassung W(VI) bildet mit Thioglykolsäure und Glykolsäure mäßig stabile Fünfringchelate der Zusammensetzung WR₂, mit Glycin ein sehr schwaches WR. Chelate mit den Sechsringbildnern 3-Mercaptopropionsäure und o-Mercaptobenzoesäure sind nicht nachweisbar. Das Thioglykolsäurechelat kristallisiert aus Methanol als gelbes Na-Salz WO₂(SCH₂COONa)₂·2CH₃OH und ist mit Di-phenylguanidin als Ionenpaar in Butanol extrahierbar. Die photometrische Wolframbestimmung mit Thioglykolsäure in wäßriger Lösung erreicht eine Bestimmungsgrenze von = 0,92 ppm W (P=99,9%;M=2) und eine Standardabweichung vons=0,24 ppm W (f=21).

---

Chelation and photometric determination of tungsten (VI) with thioglycolic acid and related compounds

Summary W(VI) forms moderately stable, five-membered ring chelates of the composition WR₂ with thioglycolic and glycolic acid, and a very weak WR with glycine. Chelation with the six-ring forming 3-mercaptopropionic acid and o-mercaptobenzoic acid could not be detected. The chelate with thioglycolic acid crystallizes from methanol as the yellow sodium salt WO₂(SCH₂COONa)₂·2CH₃OH and can be extracted into butanol as an ion pair with diphenylguanidine. The photometric determination of tungsten with thioglycolic acid has a determination limit of = 0.92 ppm W (P=99.9%;M=2) and a standard deviations=0.24 ppmW (f=21).

Wir danken Herrn Prof. F. Umland für die Förderung dieser Untersuchungen sowie H. Weber, M. Lamm und U. Görs für ihre Mithilfe.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。