Robotic heavy metal anodic stripping voltammetry: ease and efficacy for trace lead and cadmium electroanalysis

A novel strategy for the automation of trace lead (Pb²⁺) and cadmium (Cd²⁺) anodic stripping voltammetry (ASV) is described. This was achieved using an electrode assembly comprising a small standard reference electrode, a Pt wire counter electrode, and an in situ bismuth-plated pencil lead working electrode for ASV in a robotic device adapted for measurements in a 24-well microtiter plate format. The movement of the electrode assembly through individual wells was by computer-controlled micropositioning, and each microtiter plate run included a sequence of electrode pretreatment, water rinsing, and simultaneous Pb²⁺ and Cd²⁺ ASV measurements. Analyte concentrations down to 2 μg/L (Pb²⁺) and 20 μg/L (Cd²⁺) could be measured in drinking and tap water, a wastewater reference material and a soil sample, with an accuracy and standard deviation typical of stripping analysis. This robotic electrochemical strategy offers automated trace metal analysis with simple instrumentation and is suggested as an option for routine use in analytical laboratories such as those providing environmental heavy metal testing services.     

Amperometric Hydrogen Peroxide Biosensor Based on the Immobilization of Horseradish Peroxidase (HRP) on the Layer‐by‐Layer Assembly Films of Gold Colloidal Nanoparticles and Toluidine Blue

The precursor film was first formed on the Au electrode surface based on the self‐assembly of L ‐cysteine and the adsorption of gold colloidal nanoparticles (nano‐Au). Layer‐by‐layer (LBL) assembly films of toluidine blue (TB) and nano‐Au were fabricated by alternately immersing the electrode with precursor film into the solution of toluidine blue and gold colloid. Cyclic voltammetry (CV) and quartz crystal microbalance (QCM) were adopted to monitor the regular growth of {TB/Au} bilayer films. The successful assembly of {TB/Au}_n films brings a new strategy for electrochemical devices to construct layer‐by‐layer assembly films of nanomaterials and low molecular weight materials. In this article, {TB/Au}_n films were used as model films to fabricate a mediated H₂O₂ biosensor based on horseradish peroxidase, which responded rapidly to H₂O₂ in the linear range from 1.5×10^?7 mol/L to 8.6×10^?3 mol/L with a detection limit of 7.0×10^?8 mol/L. Morphologies of the final assembly films were characterized with scanning probe microscopy (SPM).     

Photoelectric properties of Cz-Py-MV2+ monolayer films

Diaza-18-crown-6-ethers appending two pyrenyl (Py-C) or two carbazolyl (Cz-C) groups form 1 : 1 host–guest complexes with methyl viologen chloride (MV²⁺). These complexes were assembled into monolayers by Langmuir-Blodgett (L-B) technique. The generated assembly involves the general structure of donor-sensitizer-acceptor (Cz-Py-MV²⁺) in space, although any of the photo- and redox-active components are not covalently bonded. This assembly was transferred on an indiumtin oxide (ITO) glass to fabricate an electrode. The photoinduced voltage of this electrode was measured with a saturated calomel reference electrode in hydroquinone (H₂Q) solution to be ca. 168 mV with the light intensity of ca. 218 mW/cm². This electrode was used as the light electrode to construct a photogalvanic cell with a platinum electrode as the dark electrode. Irradiation of the light electrode resulted in anodic photocurrent. The effects of light intensity, bias voltage, concentration of H₂Q and oxygen on the photocurrent were investigated.     

A Novel NH2/ITO Ion Implantation Electrode: Preparation,Characterization, and Application in Bioelectrochemistry

A novel NH₂⁺ ion implantation‐modified indium tin oxide (NH₂/ITO) electrode was prepared. Acid‐pretreated, negatively charged MWNTs were firstly modified on the surface of NH₂⁺ ion implantation electrode, then, positively charged Mb was adsorbed onto MWNTs films by electrostatic interaction. The assembly of MWNTs and Mb was characterized with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized Mb showed a couple of quasireversible cyclic voltammetry peaks in pH 7.0 phosphate buffer solution (PBS). The apparent surface concentration of Mb at the electrode surface was 1.06×10^?9 mol cm^?2. The Mb/MWNTs/NH₂/ITO electrode also gave an improved electrocatalytic activity towards the reduction of hydrogen peroxide. The catalysis currents increased linearly to the H₂O₂ concentration in a wide range from 9×10^?7 to 9.2×10^?5 M with a correlation coefficient of 0.999. The detection limit was 9.0×10^?7 M. The experiment results demonstrated that the modified electrode provided a biocompatible microenvironment for protein and supplied a necessary pathway for its direct electron transfer.     

Immunosensors Based on Layer‐by‐Layer Self‐Assembled Au Colloidal Electrode for the Electrochemical Detection of Antigen

Colloidal Au particles have been deposited on the gold electrode through layer‐by‐layer self‐assembly using cysteamine as cross‐linkers. Self‐assembly of colloidal Au on the gold electrode resulted in an easier attachment of antibody, larger electrode surface and ideal electrode behavior. The redox reactions of [Fe(CN)₆]^4?/[Fe(CN)₆]^3? on the gold surface were blocked due to antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.0 with various concentrations of antigen at 37 °C for 30 min. Further, an amplification strategy to use biotin conjugated antibody was introduced for improving the sensitivity of impedance measurements. Thus, the sensor based on this immobilization method exhibits a large linear dynamic range, from 5–400 μg/L for detection of Human IgG. The detection limit is about 0.5 μg/L.     

Artificial photosynthesis by using chloroplasts from spinach adsorbed on a nanocrystalline TiO2 electrode for photovoltaic conversion

Photovoltaic conversion has been achieved by use of chloroplasts (photosynthetic organs) from spinach adsorbed on a nanocrystalline TiO₂ film on an indium tin oxide (ITO) glass electrode (chloroplast/TiO₂ electrode). The shape of the absorption spectrum of the chloroplast/TiO₂ electrode is almost the same that of a dispersion of the chloroplasts. Absorption maxima of the chloroplast/TiO₂ electrode observed at 430, 475, and 670 nm were attributed to carotenoid and chlorophyll molecules, suggesting that chloroplasts have been adsorbed by the nanocrystalline TiO₂ film on the ITO electrode. The photocurrent responses of chloroplast/TiO₂ electrodes were measured by using a solution of 0.1 M tetrabutylammonium hexafluorophosphate in acetonitrile as redox electrolyte in the presence or absence of water and 100 mW cm^?2 irradiation. The photocurrent of the chloroplast/TiO₂ electrode was increased by adding water to the redox electrolyte. The photocurrent responses of chloroplast/TiO₂ electrodes irradiated with monochromatic light (680 nm, the absorption band of photosystem II complexed with evolved oxygen) were measured by use of a solution of 0.1 M tetrabutylammonium hexafluorophosphate in acetonitrile as redox electrolyte in the presence or absence of water. A chloroplast/TiO₂ electrode photocurrent was observed only when the redox electrolyte containing water was used, indicating that the oxygen evolved from water by photosystem II in chloroplasts adsorbed by a nanocrystalline TiO₂ film on an ITO electrode irradiated at 680 nm is reduced to water by the catalytic activity of the platinum electrode. The maximum incident photon-to-current conversion efficiency (IPCE) was 0.8 % on irradiation at 670 nm.     

Hydrogen Isotope Exchange Reactions in an Atmospheric Pressure Discharge Utilizing Water as Carrier Gas

Allowing water/hydrogen or water/hydrogen/He gas mixture to flow through micro- hollow type of electrodes and applying 60 Hz AC power between the electrodes made it possible to sustain large area and atmospheric pressure discharge. The electrode assembly was constructed by sandwiching a dielectric spacer with two thin metal sheets and boring an array of micro holes through them. Another variation of the assembly was prepared by stacking thin metallic sheets so that the stack functions as an electrode through which the gas mixture flows for generating dielectric barrier discharge. A large volume of the gas mixture, while producing plasma, underwent instantaneous hydrogen isotope exchange reactions between H₂O and D₂O or between D₂O and H₂ gas molecules. The efficiency of the atmospheric pressure discharge was assessed by measuring the extent of the exchange reactions at a given flow rate of the gas mixture.     

Photodriven water oxidation initiated by a surface bound chromophore-donor-catalyst assembly

In photosynthesis, solar energy is used to produce solar fuels in the form of new chemical bonds. A critical step to mimic photosystem II (PS II), a key protein in nature''s photosynthesis, for artificial photosynthesis is designing devices for efficient light-driven water oxidation. Here, we describe a single molecular assembly electrode that duplicates the key components of PSII. It consists of a polypyridyl light absorber, chemically linked to an intermediate electron donor, with a molecular-based water oxidation catalyst on a SnO₂/TiO₂ core/shell electrode. The synthetic device mimics PSII in achieving sustained, light-driven water oxidation catalysis. It highlights the value of the tyrosine–histidine pair in PSII in achieving efficient water oxidation catalysis in artificial photosynthetic devices.

We describe a single molecular assembly electrode that mimics PSII. Flash photolysis revealed the electron transfer steps between chromophore light absorption and the creation and storage of redox equivalents in the catalyst for water oxidation.     

How Water Accelerates Bivalent Ion Diffusion at the Electrolyte/Electrode Interface

The effect of H₂O in electrolytes and in electrode lattices on the thermodynamics and kinetics of reversible multivalent‐ion intercalation chemistry based on a model platform of layered VOPO₄ has been investigated. The presence of H₂O at the electrolyte/electrode interface plays a key role in assisting Zn²⁺ diffusion from electrolyte to the surface, while H₂O in the lattice structure alters the working potential. More importantly, a dynamic equilibrium between bulk electrode and electrolyte is eventually reached for H₂O transport during the charge/discharge cycles, with the water activity serving as the key parameter determining the direction of water movement and the cycling stability.     

Polythymine Oligonucleotide‐Modified Gold Electrode for Voltammetric Determination of Mercury(II) in Aqueous Solution

Polythymine oligonucleotide (PTO)‐modified gold electrode (PTO/Au) was developed for selective and sensitive Hg²⁺ detection in aqueous solutions. This modified electrode was prepared by self‐assembly of thiolated polythymine oligonucleotide (5′‐SH‐T₁₅‐3′) on the gold electrode via Au? S bonds, and then the surface was passivated with 1‐mercaptohexanol solution. The proposed electrode utilizes the specific binding interactions between Hg²⁺ and thymine to selectively capture Hg²⁺, thereby reducing the interference from coexistent ions. After exchanging the medium, electrochemical reduction at ?0.2 V for 60 s, voltammetric determination was performed by differential pulse voltammetry using 10 mM HEPES; pH 7.2, 1 M NaClO₄ as supporting electrolyte. This electrode showed increasing voltammetric response in the range of 0.21 nM Hg²⁺, with a relative standard deviation of 5.32% and a practical detection limit of 60 pM. Compared with the conventional stripping approach, the modified electrode exhibits good sensitivity and selectivity, and is expected to be a new type of green electrode.     

Self-assembly of ultra-small gold nanoparticles on an indium tin oxide electrode for the enzyme-free detection of hydrogen peroxide

A novel enzyme-free electrochemical sensor for H₂O₂ was fabricated by modifying an indium tin oxide (ITO) support with (3-aminopropyl) trimethoxysilane to yield an interface for the assembly of colloidal gold. Gold nanoparticles (AuNPs) were then immobilized on the substrate via self-assembly. Atomic force microscopy showed the presence of a monolayer of well-dispersed AuNPs with an average size of ~4 nm. The electrochemical behavior of the resultant AuNP/ITO-modified electrode and its response to hydrogen peroxide were studied by cyclic voltammetry. This non-enzymatic and mediator-free electrode exhibits a linear response in the range from 3.0?×?10^?5 M to 1.0?×?10^?3 M (M?=?mol?·?L^?1) with a correlation coefficient of 0.999. The limit of detection is as low as 10 nM (for S/N?=?3). The sensor is stable, gives well reproducible results, and is deemed to represent a promising tool for electrochemical sensing.

Electro‐assembly of a Chromophore–Catalyst Bilayer for Water Oxidation and Photocatalytic Water Splitting

The use of electropolymerization to prepare electrocatalytically and photocatalytically active electrodes for water oxidation is described. Electropolymerization of the catalyst Ru^II(bda)(4‐vinylpyridine)₂ (bda=2,2′‐bipyridine‐6,6′‐dicarboxylate) on planar electrodes results in films containing semirigid polymer networks. In these films there is a change in the water oxidation mechanism compared to the solution analogue from bimolecular to single‐site. Electro‐assembly construction of a chromophore–catalyst structure on mesoporous, nanoparticle TiO₂ films provides the basis for a dye‐sensitized photoelectrosynthesis cell (DSPEC) for sustained water splitting in a pH 7 phosphate buffer solution. Photogenerated oxygen was measured in real‐time by use of a two‐electrode cell design.     

Highly Sensitive Electrochemical Sensor for Determination of Vitamin D in Mixtures of Water‐Ethanol

This paper describes the electrochemical determination of vitamin D₂ (ergocalciferol) and D₃ (cholecalciferol) in mixed organic/water solvent, using a glassy carbon electrode (GCE). The mixing ratio of organic/water solvent has an important influence on the electrocatalytic response of D vitamins on the surface of the glassy carbon electrode. Well‐defined peaks for Vitamin D₂ and D₃ were observed in a 40 % ethanol/60 % water solution with lithium perchlorate as the support electrolyte. This study demonstrated that the glassy carbon electrode is highly sensitive for the determination of vitamin D₂ and D₃, with a limit of detection of 0.13 and 0.118 µmol L^?1, respectively. No significant interference was seen for vitamins A, E and K in the detection of vitamin D.     

Quartz crystal microbalance monitoring of density changes in mesoporous TiO2 phytate films during redox and ion exchange processes

Nanofilm deposits of TiO₂ nanoparticle phytates are formed on gold electrode surfaces by ‘directed assembly’ methods. Alternate exposure of a 3-mercapto-propionic acid modified gold surface to (i) a TiO₂ sol and (ii) an aqueous phytic acid solution (pH 3) results in layer-by-layer formation of a mesoporous film. Ru(NH₃)₆³⁺ is shown to strongly adsorb/accumulate into the mesoporous structure whilst remaining electrochemically active. Scanning the electrode potential into a sufficiently negative potential range allows the Ru(NH₃)₆³⁺ complex to be reduced to Ru(NH₃)₆²⁺ which undergoes immediate desorption. When applied to a gold coated quartz crystal microbalance (QCM) sensor, electrochemically driven adsorption and desorption processes in the mesoporous structure become directly detectable as a frequency response, which corresponds directly to a mass or density change in the membrane. The frequency response (at least for thin films) is proportional to the thickness of the mass-responsive film, which suggests good mechanical coupling between electrode and film. Based on this observation, a method for the amplified QCM detection of small mass/density changes is proposed by conducting measurements in rigid mesoporous structures.     

Theoretical investigation of changes in the thermodynamic properties of water in the region near an electrode upon the discharge of an hydroxonium ion

A method for investigating solutions in the region near an electrode has been developed in the framework of the Monte Carlo method. The energies of the reorganization of water upon the transfer of an electron to a hydroxonium ion from the unpolarized surface of an absolutely solid charged electrode in the range of surface charge densities from +0.056 to –0.640 C/m² and upon the reverse process have been calculated. The hydration energies of an H₃O⁺ cation and an H₃O^– radical in the region near an electrode have been calculated. The effective interactions of an ion and a nonpolar molecule with an electrode in a solution have been analyzed.Translated from Teoreticheskaya i Éksperimental/naya Khimiya, Vol. 26, No. 5, pp. 596–600, September–October, 1990.     

Polyethylenimine‐assisted Synthesis of Au Nanoparticles for Efficient Syngas Production

The ability to capture, store, and use CO₂ is important for remediating greenhouse‐gas emissions and combatting global warming. Herein, Au nanoparticles (Au‐NPs) are synthesized for effective electrochemical CO₂ reduction and syngas production, using polyethylenimine (PEI) as a ligand molecule. The PEI‐assisted synthesis provides uniformly sized 3‐nm Au NPs, whereas larger irregularly shaped NPs are formed in the absence of PEI in the synthesis solution. The Au‐NPs synthesized with PEI (PEI?Au/C, average PEI Mw=2000) exhibit improved CO₂ reduction activities compared to Au‐NPs formed in the absence of PEI (bare Au NPs/C). PEI?Au/C displays a 34 % higher activity toward CO₂ reduction than bare Au NPs/C; for example, PEI?Au/C exhibits a CO partial current density (j_CO) of 28.6 mA cm^?2 at ?1.13 V_RHE, while the value for bare Au NPs/C is 21.7 mA cm^?2; the enhanced j_CO is mainly due to the larger surface area of PEI?Au/C. Furthermore, the PEI?Au/C electrode exhibits stable performance over 64 h, with an hourly current degradation rate of 0.25 %. The developed PEI?Au/C is employed in a CO₂‐reduction device coupled with an IrO₂ water‐oxidation catalyst and a proton‐conducting perfluorinated membrane to form a PEI?Au/C|Nafion|IrO₂ membrane‐electrode assembly. The device using PEI?Au/C as the CO₂‐reduction catalyst exhibits a j_CO of 4.47 mA/cm² at 2.0 V_cell. Importantly, the resulted PEI?Au/C is appropriate for efficient syngas production with a CO ratio of around 30–50 %.     

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe₂O₃ on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO₂ as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe₂O₃|−carbazole|TiO₂|−Ru(carbene) , demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.2-fold at 0.95 V vs. NHE and a negatively shifted onset potential of 500 mV. The enhanced PEC performance is attributable to carbazole mediator accelerated interfacial hole transfer from Fe₂O₃ to the Ru(II) carbene co-catalyst, with an improved effective surface area for the water oxidation reaction and reduced charge transfer resistance.     

The acidity functions of trifluoroethanol and hexafluoroisopropanol,and their mixtures with water

Acidity measurements in trifluoroethanol and hexafluoroisopropanol as solvents, and in their mixtures with water, are reported. The hydrogen electrode and the glass electrode were used for pH measurements. The “experimental” autoprotolysis constants were determined from measurements in strongly acidic (trifluoromethanesulfonic) media and in strongly basic (alcoholate) media: for trifluoroethanol, pK = -log K/mol² l^-2 = 15 and for hexafluoroisopropanol, pK = 14.8. Evaluation of the pH-indicator potential systems with reference to the ferrocene/ferricinium couple gives the acidity function R₀(H). The values obtained are compared to the H₀ values evaluated in the same conditions.     

Nanocrystalline Tin‐Oxide Modified Electrodes and their Electrochemical Characterization

Nanocrystalline tin‐oxide particles were prepared as electrodes on the bases of ITO glass and AT‐cut quartz crystals (sputtered gold), respectively, and characterized for their electrochemical behavior. Experiments suggested that the SnO₂ particles could induce an energy barrier to the redox reactions taking place on the electrode surface. When the amount of SnO₂ exceeded ca. 10^?7 mol cm^?2, electrochemical activity demonstrated by the solution redox couples was entirely suppressed. Nevertheless, electrochemical impedance spectroscopic (EIS) measurements suggested that mutual communication between redox couples would still take place on the surface of SnO₂. For instance, although the CV curves of Fe(CN)₆^3‐/4‐ were completely blocked, the exchange current of Fe(CN)₆^3‐/4‐ could still flow through the tin‐oxide modified electrode, increasing with its concentration up to 40 mM. The propagation of electrons in the SnO₂ film was likely via a hopping mechanism. Electrochemical quartz microbalance (EQCM) measurements, in addition, suggested that a charge‐compensating cation (K⁺ or H⁺) uptake reaction may be induced as electrons were pumped to the Sn0₂ electrode, while, if electrons were removed, that could cause water desorption. Analysis based on the Frumkin adsorption isotherm showed the driving force behind the adsorption of water on SnO₂ is about ?2 kcal/mol. Nonetheless, the adsorbed water might face a competitive repulsion from acetonitrile when acetonitrile was used as the electrolyte medium.     

Hierarchical NiCo2O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water‐Splitting

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo₂O₄) has been considered a promising electrode material for the OER. However, NiCo₂O₄ that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self‐assembled hierarchical NiCo₂O₄ hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo₂O₄ electrode shows excellent activity toward overall water splitting, with 10 mA cm^?2 water‐splitting current reached by applying just 1.65 V and 20 mA cm^?2 by applying just 1.74 V across the two electrodes. The synthesis of NiCo₂O₄ microflowers confirms the importance of structural features for high‐performance overall water splitting.