Sensing of 2,4-dichlorophenoxyacetic acid by surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) spectra of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) was obtained by employing a bi-layer gold substrate, assembled by the reduction of Au(III) over gold-seeded nanoparticles immobilized on functionalized glass substrates. The SERS signal was linear with the logarithm of the solution concentrations between 1.0 × 10⁻⁷ mol L⁻¹ and 1.0 × 10⁻³ mol L⁻¹, indicating that the bi-layer gold substrate affords a significant dynamic range for SERS, providing an excellent analytical response within this concentration range, and revealing the high sensitivity of the gold surface towards such analyte. In addition, using the same gold substrate, a similar calibration curve was obtained for crystal-violet (CV), and it was possible to identify the concentration limit corresponding to the transition from the average SERS to the nonlinear SERS response.     

Adsorption of 4-aminopyridine on Co and Ag electrodes probed by SERS

The adsorption of 4-aminopyridine (4-AP) on Co and Ag electrodes in acid or alkaline solutions of KCl and KI electrolyte salts were monitored by the Surface-enhanced Raman Spectroscopy (SERS) technique. The SERS intensity for the Ag electrode was in 2 orders of magnitude higher than for the Co electrode, due to the enhancement of the Raman cross-section on Ag by the surface-plasmon excitation. In acidic chloride medium (pH 4), the SERS results for Ag electrodes indicate that the protonated form of 4-AP (4-APH⁺) adsorbs in the potential range of −0.1 to −0.6 V (Ag|AgCl|KCl sat) through hydrogen-bonding between 4-APH⁺ and Cl⁻ adsorbed on the electrode surface; at more negative potentials the neutral form 4-AP is the predominant adsorbed species. For Co electrode in the same medium, only bands due to neutral 4-AP were observed in the spectra at −0.8 and −0.9 V. For more negative potentials bands assigned to both 4-AP and 4-AP surface complex are observed, with the lasts being enhanced, as the potentials are turned more negative. In alkaline chloride medium (pH 13), for less negative potentials the bands assigned to free 4-AP were observed in the spectra of both Ag and Co surfaces. For more negative potentials, only bands assigned to the 4-AP surface complex were observed. For 0.1 mol L⁻¹ KI acidic or alkaline solutions, bands assigned to 4-AP and 4-APH⁺ were observed in a wider potential range than in chloride solutions. An adsorption scheme of 4-AP on Ag and Co is proposed for acidic and alkaline solutions.     

Electrochemical deposition of silver nanoparticles in multiwalled carbon nanotube-alumina-coated silica for surface-enhanced Raman scattering-active substrates

The work presents a novel surface-enhanced Raman scattering (SERS)-active surface prepared by electrochemical deposition of silver nanoparticles in multiwalled carbon nanotube (MWCNT)–alumina-coated silica (ACS) nanocomposite. The formation of Ag nanoparticles in MWCNT–ACS nanocomposite was investigated by scanning electron microscopy. It shows that Ag nanoparticles with a diameter of about 100–200 nm in the MWCNT–ACS nanocomposite and some Ag nanoparticles aggregated to form interconnected aggregates. The Ag–MWCNT–ACS-coated indium tin oxide substrate has a considerable effect on the Raman spectra with improvements of more than four times of magnitude as compared with the Ag-coated indium tin oxide substrate. The present methodology demonstrates that the composite composed of Ag, MWCNT, and ACS is suitable for potential plasmonic devices.     

Preparation of conducting silver paste with Ag nanoparticles prepared by e-beam irradiation

Conducting silver paste was prepared by using Ag nanoparticles which were synthesized by e-beam irradiation method (from KAERI); its conductivity was comparatively determined with Ag nanoparticles which were prepared by thermolysis method (commercial). The silver nanoparticles with the diameter of approximately 150 nm size prepared by e-beam irradiation were mixed with glass frit and sintered for 1 h at 500 °C. It is presumably concluded that the wt% of silver nanoparticle, size distribution and homogenous dispersibility of Ag nanoparticles in the pastes are the critical factors for the high conductivity of the paste. Among the various wt% of silver nanoparticle in the conducting silver pastes, silver paste with 90 wt% of silver nanoparticle has the highest conductivity as 1.6×10⁴ S cm^?1. This conductivity value is 1.6 times higher than the Ag pastes which were prepared with silver nanoparticles obtained by thermolysis method.     

NIR-SERS studies of DNA and DNA bases attached on polyvinyl alcohol (PVA) protected silver grass-like nanostructures

In this work, polyvinyl alcohol (PVA) protected silver grass-like nanostructure (PVA–Ag–GNS) with near infrared surface-enhanced Raman scattering (NIR-SERS) activity was prepared and employed to detect DNA and DNA bases. The PVA–Ag–GNS demonstrated high NIR-SERS activity and good optical reproducibility in the detection of adsorbates such as the case of crystal violet, DNA and DNA bases. By using of the tested molecule of thymine, the PVA–Ag–GNS shows a high enhancement factor (EF) of ∼10⁸. For NIR-SERS detection of DNA molecules, Raman signals from the DNA bases of guanine (630 cm⁻¹) and adenine (720 cm⁻¹) are greatly enhanced. For DNA molecules NIR-SERS detection, Raman signals from the DNA bases of guanine (630 cm⁻¹), adenine (720 cm⁻¹) and cytosine (1010 cm⁻¹) are greatly enhanced. The experimental results show that the NIR-SERS spectrum of DNA is dominated by guanine mode, which is followed by adenine and cytosine modes, respectively. Meanwhile, the NIR-SERS signal intensities of the DNA bases increase in the order of thymine (T) < cytosine (C) < adenine (A) < guanine (G). One can conclude that the adsorption strength of the DNA bases in DNA molecule with the silver surface is in the order T < C < A < G, which is different from that of the four DNA bases in individual molecule adsorbed on silver surface (T < A < G < C). On the other hand, the geometry optimization and calculated wavenumber of the complexes of adenine–Ag, guanine–Ag, cytosine–Ag and thymine–Ag for the ground states are performed with DFT, B3LYP functional and the LanL2DZ basis set. The calculated wavenumbers match well with the experimental results. According to our experiment and calculations, DNA base molecules adsorbed on silver surface via the intra-annular nitrogen atom which is adsorbed on the silver nanoparticle and formed metal–molecule complexes by the available lone pair.     

Enhanced Raman spectroscopy coupled to chemometrics for identification and quantification of acetylcholinesterase inhibitors

In this work, we present a new complete method using Surface Enhanced Raman Spectroscopy (SERS) and chemometrics for the qualitative and quantitative detection of pesticides by measuring the acetylcholinesterase (ACHE) activity. The Raman SERS is not only used for measuring the ACHE activity, but also for the direct detection of pesticides individually and for their identification. Gold nanoparticles (AuNPs) were used as dynamic SERS substrates for sensitive monitoring of ACHE activity in the presence of very low levels of organophosphate and carbamate pesticides, chemical warfare agents that are known to be ACHE inhibitors. The lowest detectable level for paraoxon was determined at 4.0 × 10⁻¹⁴ M and 1.9 × 10⁻⁹ M for carbaryl. The use of the enzyme allowed limits of detection for both pesticides that were much lower than the limits obtained by direct SERS analysis of the pesticides. The system shows a linear relationship between the intensity band at 639 cm⁻¹ and pesticide concentration. These results suggest that this biosensor could be used in the future for the non-selective detection of all ACHE inhibitors at very low concentrations with possible identification of the inhibitor.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag nanoparticle and macroscopically smooth Au substrate: effects of size of Ag nanoparticles and the excitation wavelength

A nanogap formed by a metal nanoparticle and a flat metal substrate is one kind of "hot site" for surface-enhanced Raman scattering (SERS). Accordingly, although no Raman signal is observable when 4-aminobenzenethiol (4-ABT), for instance, is self-assembled on a flat Au substrate, a distinct spectrum is obtained when Ag or Au nanoparticles are adsorbed on the pendent amine groups of 4-ABT. This is definitely due to the electromagnetic coupling between the localized surface plasmon of Ag or Au nanoparticle with the surface plasmon polariton of the planar Au substrate, allowing an intense electric field to be induced in the gap even by visible light. To appreciate the Raman scattering enhancement and also to seek the optimal condition for SERS at the nanogap, we have thoroughly examined the size effect of Ag nanoparticles, along with the excitation wavelength dependence, by assembling 4-ABT between planar Au and a variable-size Ag nanoparticle (from 20- to 80-nm in diameter). Regarding the size dependence, a higher Raman signal was observed when larger Ag nanoparticles were attached onto 4-ABT, irrespective of the excitation wavelength. Regarding the excitation wavelength, the highest Raman signal was measured at 568 nm excitation, slightly larger than that at 632.8 nm excitation. The Raman signal measured at 514.5 and 488 nm excitation was an order of magnitude weaker than that at 568 nm excitation, in agreement with the finite-difference time domain simulation. It is noteworthy that placing an Au nanoparticle on 4-ABT, instead of an Ag nanoparticle, the enhancement at the 568 nm excitation was several tens of times weaker than that at the 632.8 nm excitation, suggesting the importance of the localized surface plasmon resonance of the Ag nanoparticles for an effective coupling with the surface plasmon polariton of the planar Au substrate to induce a very intense electric field at the nanogap.     

Surface-enhanced Raman scattering of 4,4′-bipyridine on silver by density functional theory calculations

Surface-enhanced Raman scattering (SERS) of 4,4′-bipyridine (BPy) on silver foil substrate was measured using the 488, 514.5, and 1064 nm excitation lines. Density functional theory (DFT) methods were used to calculate the structure and vibrational spectra of Ag–BPy, Ag₃–BPy and Ag₄–BPy complexes with B3LYP/6-31++G(d,p)(C,H,N)/Lanl2dz(Ag) basis set. The Raman bands of BPy were assigned on the basis of the calculation of potential energy distribution. The calculated spectra of Ag–BPy and Ag₄–BPy complexes were much closer to the experimental results of BPy adsorbed on silver surface than that of Ag₃–BPy complexes. The vibrational frequencies that are sensitive to the planar or non-planar structure of BPy and to the dihedral angle of two pyridyl rings were discussed. The DFT results showed that the angles between two pyridyl rings for Ag–BPy and Ag₄–BPy were skewed by about 38.44° and 37.1°, respectively. The energy gaps of the HOMO and LUMO from DFT were 415–912 nm for BPy–Ag complexes. The relative intensities of SERS bands changed with different excitation laser lines. Thus, a chemical enhancement mechanism should play an important role in the SERS of BPy on silver substrate.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag/Au nanoparticle and macroscopically smooth Au substrate

Raman scattering measurements were conducted for a 4-aminobenzenethiol (4-ABT) monolayer assembled on a macroscopically smooth Au substrate. Although no peak was detected at the beginning, Raman peaks were distinctly observed by attaching Ag or Au nanoparticles onto the 4-ABT monolayer (Ag(Au)@4-ABT/Au(flat)). Considering the fact that no Raman signal is observed when Ag (Au) nanoparticles are adsorbed on a (4-aminophenyl)silane monolayer assembled on a silicon wafer, the Raman spectrum observed for Ag(Au)@4-ABT/Au(flat) must be a surface-enhanced Raman scattering (SERS) spectrum, derived from the electromagnetic coupling of the localized surface plasmon of Ag (Au) nanoparticles with the surface plasmon polariton of the underneath Au metal. The electromagnetic coupling responsible for SERS appeared to be governed more by the bulk Au substrate than the sparsely distributed Ag or Au nanoparticles. The chemical enhancement appeared on the other hand to be derived more from the formation of Au-S bonds than any charge-transfer interaction between the protonated amine group and the Au or Ag nanoparticles. The enhancement factors derived from the attachment of a single Ag or Au nanoparticle onto 4-ABT on Au were estimated to be as large as 8.3 x 10(5) and 5.0 x 10(5), respectively, (for the ring 3 band (b(2)) near 1390 cm(-1)) in which a factor of approximately 10(2) was presumed to be due to the chemical effect, with the remaining contributed by the electromagnetic effect.     

Trace molecules detectable by surface-enhanced Raman scattering based on newly developed Ag and Au nanoparticles-containing substrates

In this work, Ag and Au nanoparticles-containing substrates were first developed for obtaining a stronger surface-enhanced Raman scattering (SERS) intensity of Rhodamine 6G (R6G) and reducing the limit of detection (LOD) of trace molecules. First, the optimum electrochemically roughening conditions employed on Ag substrates for obtaining strongest SERS of R6G were investigated. Then the optimally roughened Ag substrates were incubated in the prepared Cl- and Au-containing solutions for different couples of minutes to undergo the galvanic replacement reactions. Encouragingly, the SERS of R6G adsorbed on this roughened Ag substrate modified by the replacement of Ag with Au for 5 min exhibits a higher intensity by 8-fold of magnitude, as compared with the SERS of R6G adsorbed on an unmodified roughened Ag substrate. Moreover, the practical LOD of R6G can be reduced by one order of magnitude from 1 ppq to 0.1 ppq. Further investigations indicate that the compositions of complexes formed on the substrates demonstrate decided effects on the improved SERS.     

Raman spectroscopy of gold nanoparticle conjugates of cosmetic ingredient kinetin

We performed a feasibility test of the cosmetic ingredient kinetin (KT)-gold nanoparticle (AuNP) conjugates by means of vibrational Raman spectroscopy and quantum mechanical calculations. The adsorptions of KT on AuNP surfaces were examined by absorption spectra and surface-enhanced Raman scattering (SERS). The size of KT at the initial concentrations of 10⁻⁵ M with the AuNP composites was measured to be 22 nm. Density functional theory (DFT) calculations were performed to estimate the energetic stabilities of KT on an Au cluster atom. The two tautomeric forms of 9H-amino and 7H-amino in KT are predicted to have similar energies on Au. The N3-coordinating geometries in both 9H-amino and 7H-amino forms of KT are predicted to be most stable on an Au cluster. Vibrational analysis also suggested that the two tautomers of KT should coexist in the adsorbed state on Au. The concentration-dependent SERS spectra of KT indicated that 5 × 10⁻⁵ M exhibited the highest SERS signals.     

In-situ surface-enhanced Raman scattering and FT-Raman spectroscopy of black prints

The black inkjet and laser prints were analysed with regard to application in forensic analysis of questioned documents. The purpose of this work was to study spectral properties and compare the suitability of surface-enhanced Raman scattering (SERS) with Fourier transform Raman spectra of prints. This work aimed to find optimal surface-enhanced Raman spectroscopic approach for the future analysis of documents using statistical methods. In this work, we analysed eight prints of four laser and four inkjet devices. The samples were measured using two dispersive Raman devices; (DXR Raman microscope with excitation line 532 nm, Foram 685-2 spectrometer − 685 nm) and FT-Raman device (Bruker Spectrometer MultiRAM with excitation line 1064 nm). The silver nanoparticles (AgNPs) colloid for SERS experiment were synthesised and checked by UV–vis spectroscopy and scanning electron microscopy (SEM). The remarkable differences caused by centrifugation of silver colloid were observed just in the SEM images. The main contribution of this paper is to propose the novel approach achieving sufficient SERS signal intensity of black prints using the both, laser and inkjet printers. Moreover, this method is based on just a single metal colloid, and the analysis can be performed in-situ, i.e. directly on the printed sample surface. We consider the SERS could by highly promising and universal for applications in the forensic analysis of printed documents with the combination of statistical method when conventional methods are not effective.     

Surface-enhanced Raman studies of bradykinin using colloidal gold

In this paper, bradykinin (BK), an endogenous peptide hormone, which is involved in a number of physiological and pathophysiological processes was deposited onto the colloidal Au nanoparticles. The surface-enhanced Raman spectroscopy (SERS) was used to determine the adsorption mode of BK under different environmental conditions, including: excitation wavelengths (514.5 nm and 785.0 nm), pH of aqueous sol solutions (from pH = 3 to pH = 11), and size of the colloidal nanoparticles (10, 20, and 50 nm). The metal surface plasmon of the colloidal suspended Au nanoparticles was examined by ultraviolet-visible (UV–vis) spectroscopy. The results showed that the C-terminal part of BK plays a crucial role in the adsorption process onto the colloidal suspended Au particles. The Phe^5/8 and Arg⁹ residues of BK mainly participate in the interactions with the colloidal Au nanoparticles. At acidic pH of the solution (pH = 3), the BK COO⁻ terminal group through the both oxygen atoms strongly binds to the Au nanoparticles. The Phe⁵/Phe⁸ rings adopt tilted orientation with respect to the colloidal Au nanoparticles with diameters of 10 and 20 nm. As the particle size increases to 50 nm, the flat orientation of the Phe ring(s) with respect to the Au nanoparticles is observed.     

Surface-enhanced Raman spectra of rhodamine 19 octadecylamide

Surface-enhanced Raman scattering (SERS) of the cationic and the neutral form of rhodamine 19 octadecylamide (R19OA) has been studied in the silver citrate colloid using NIR excitation at 1064 nm. Cationic molecules readily adsorb onto negatively charged silver nanoparticles through a positively charged xanthene part of the molecules resulting in surface enhancement of Raman scattering. Due to a lack of the positive charge in molecular structure, SERS spectrum of neutral molecules is not observed. Nevertheless, a broad band appearing at 1240 cm^?1 in the spectrum of the cationic form indicates conversion of the cationic into the neutral species occurring close to the silver surface. The observed band most likely arises from a vibration of the ring formed in the molecular structure after conversion, but before complete desorption of the neutral molecules from the metal surface. Upon addition of HCl and NaOH in the silver sol, equilibrium is shifted toward the cationic and the neutral form of R19OA, respectively, followed by corresponding changes in the Raman spectrum. In addition, FT-SERS spectra of two rhodamine dyes, rhodamine 19 (R19) and rhodamine 6G (R6G), that are structurally related to R19OA, have been studied under the same experimental conditions for comparison.     

EDL structure and peculiarities of ferricyanide cyclic voltammetry for silver deposits on gold

The evolution of electrochemical characteristics of a gold electrode upon the deposition of one and more atomic silver layers was studied by means of cyclic voltammetry and the method of potential temperature jump induced by the laser irradiation. Characteristics of the electric double layer on Ag monolayer are determined to be close to those of a massive silver electrode. Meanwhile, the electron-transfer parameters for the model redox system Fe(CN)₆^{3 −/4 −} correspond to a gold electrode. The silver beyond the first atomic layer in multilayer deposits was shown to transform into Ag hexacyanoferrate (II) due to the spontaneous chemical reaction with K₃Fe(CN)₆ from the solution. For the Fe(CN)₆^{3 −/4 −} redox system, the difference between oxidation and reduction peak potentials on a cyclic voltammogram increases with the growth of the silver layers number. This effect results from the corresponding increase in the ohmic resistance of the silver hexacyanoferrate (II) film and is not attributed to the changes in the electron-transfer kinetics.     

γ-Ray synthesis of starch-stabilized silver nanoparticles with antibacterial activities

Silver nanoparticles (Ag NPs) are fabricated through γ-irradiation reduction of silver ions in aqueous starch solutions. The UV–vis analyses show smaller sizes of Ag NPs produced, with higher yields, as the irradiation doses and/or Ag⁺ concentrations are increased. Higher concentrations of starch enhance the yields of Ag NPs, with no significant effects on their size. The most economical Ag NPs are produced at 5 kGy γ-irradiation of a 2×10⁻³ M solution of AgNO₃ containing 0.5% starch. They show a relatively narrow size distribution, indicated by TEM and its corresponding size distribution histogram. The XRD pattern confirms the face-centered cubic (fcc) Ag NPs embedded in starch molecules. Interactions between these nanoparticle surfaces and starch oxygen atoms are indicated by FT–IR. Antibacterial activities of Ag NPs against Escherichia coli appear dependent on the γ-ray doses applied.     

Epidermal cellular response to poly(vinyl alcohol) nanofibers containing silver nanoparticles

A heat-treated PVA nanofibrous matrix containing silver (Ag) was prepared by electrospinning an aqueous 10 wt% PVA solution and followed by heat treatment at 150 °C for 10 min. The average diameter of the as-spun and heat-treated PVA nanofibers was 330 nm. The heat-treated PVA nanofibrous matrix containing Ag was irradiated with UV light to transform the Ag ions in the nanofibrous matrix into Ag nanoparticles. The in vitro cytotoxicity of the Ag ions and/or nanoparticles on normal human epidermal keratinocytes (NHEK) and fibroblasts (NHEF) cultures was examined. The PVA nanofibrous matrix containing Ag showed slightly higher level of attachment and spreading in the early stage culture (1 h) than the PVA nanofibers without Ag (control). However, compared with the PVA nanofibers without Ag, the heat-treated and UV-irradiated PVA nanofibers, containing mainly Ag ions and nanoparticles, respectively, showed reduced cell attachment and spreading. This shows that both Ag ions and Ag nanoparticles are cytotoxic to NHEK and NHEF. There was no significant difference in cytotoxicity to NHEK and NHEF between Ag ions and Ag nanoparticles. NHEF appeared to be more sensitive to Ag ions or particles than NHEK. In addition, the residual nitrate ions (NO₃⁻) in the PVA nanofibers had an adverse effect on the culture of both cells.     

Performance of silver nanocubes based on electrochemical surface area for catalyzing oxygen reduction reaction

Ag nanocubes that are 45 nm in size are synthesized and successfully used as catalysts in oxygen electroreduction. Electrochemical surface areas (ESAs) are considered to determine the effect on HO₂⁻ production, which is found to be in the following order: nanocubes < nanoparticles. Comparative data generated using Tafel analyses in 0.1 M NaOH electrolyte without and with methanol show that unchanged slopes on the prepared cubic catalysts can indicate high resistance of Ag nanocubes for methanol oxidation during oxygen reduction reaction. Among these Ag catalysts, nanocubes exhibit 9.29 × 10^− 2 mA cm^− 2 (at − 0.15 V vs. Ag/AgCl), the better activity in the oxygen reduction reaction.     

Synthesis of silver nanoparticles supported on silica aerogel using gamma radiolysis

Silver clusters on SiO₂ support have been synthesized using ⁶⁰Co gamma radiation. The irradiation of Ag⁺ in aqueous suspension of SiO₂ in the presence of 0.2 mol dm⁻³ isopropanol resulted in the formation of yellow suspension. The absorption spectrum showed a band at 408 nm corresponding to typical characteristic surface plasmon resonance of Ag nanoparticles. The effect of Ag⁺ concentration on the formation of Ag cluster indicated that the size of Ag clusters vary with Ag⁺ concentration, which was varied from 4×10⁻⁴ to 5×10⁻³ mol dm⁻³. The results showed that Ag clusters are stable in the pH range of 2–9 and start agglomerating in the alkaline region at pH above 9. The effect of radiation dose rate and ratio of Ag⁺/SiO₂ on the formation of Ag clusters have also been investigated. The prepared clusters have been characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), which showed the particle size of Ag clusters to be in the range of 10–20 nm.     

Synthesis of SERS active nanoparticles for detection of biomolecules

Surface Enhanced Raman Scattering (SERS) can be used to detect specific DNA sequences by methods based on hybridisation of oligonucleotide functionalized nanoparticles to complementary DNA sequences. The problem, which has to be overcome to use this technique is that DNA is not strongly SERS active. This is due to the lack of a visible chromophore and presence of the highly negatively charged phosphate backbone, which prevents the electrostatic interaction with the metal surface necessary for the enhancement. To obtain SERS active DNA a label containing a surface seeking group, to allow adsorption of DNA on a metal surface, and a chromophore has to be attached to the DNA strand. Here we report the synthesis of three linkers containing a Raman tag [the following fluorophores were used for this purpose due to the fluorescence quenching ability of metallic nanoparticles: fluorescein, 6-aminofluorescein and tetramethylrhodamine (TAMRA)], surface complexing group (cyclic disulphide—thioctic acid) and a chemical functionality for attachment of DNA (carboxyl group). Each of the linkers also contain poly(ethylene glycol) (PEG) (3 mer), which reduces non-specific adsorption of molecules to the surface of the nanoparticles and provides colloidal stability. The synthesized linkers were used to functionalize gold citrate (18 and 50 nm), silver citrate (40 nm) and silver EDTA (35 nm) nanoparticles. All of the conjugates exhibit high stability, gave good SERS responses at laser excitation frequencies of 514 and 633 nm and could be conjugated to amino-modified oligonucleotides in the presence of the commonly used (N-(3-dimethylaminopropyl)-N′-ethyl carbodiimide hydrochloride—EDC·HCl with N-hydroxysulfosuccinimide or 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride—DMT MM, which has not been used for bioconjugate preparation previously. This approach is less time consuming and less expensive than previously used protocols and does not require the formation of a mixed layer of oligonucleotides and Raman reporter on the metal surface. Additionally the presence of a reactive functionality within the linker structure makes it possible to conjugate the linker to other biomolecules of interest such as proteins.