Comparison of the dehalogenation of dihalomethanes (CH2XI, where X = Cl, Br, I) following ultraviolet photolysis in aqueous and NaCl saltwater environments

The ultraviolet photolysis of low concentrations of CH(2)XI (X = Cl, Br, I) were investigated in water and saltwater solutions by photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both kinds of solutions formed mostly CH(2)(OH)(2) and HI and HX products. However, photolysis of the CH(2)XI molecules in saltwater resulted in production of some CH(2)XCl products not observed in aqueous solutions without salt present. The appearance of these new products in saltwater solutions is accompanied by a decrease in the amount of CH(2)(OH)(2), HI, and HX products compared to photolysis in aqueous solutions without salt present. The possible implications for photolysis of CH(2)XI and other polyhalomethanes in seawater and other salt aqueous environments compared to nonsaltwater solvated environments is briefly discussed.     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

Comparison of the dehalogenation of polyhalomethanes and production of strong acids in aqueous and salt (NaCl) water environments: Ultraviolet photolysis of CH(2)I(2)

The ultraviolet photolysis of CH(2)I(2) was studied in water and salt water solutions using photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both types of environments produces mainly CH(2)(OH)(2) and HI products. However, photolysis of CH(2)I(2) in salt water leads to the formation of different products/intermediates (CH(2)ICl and Cl(2) (-)) not observed in the absence of salt in aqueous solutions. The amount of CH(2)(OH)(2) and HI products appears to decrease after photolysis of CH(2)I(2) in salt water compared to pure water. We briefly discuss possible implications of these results for photolysis of CH(2)I(2) and other polyhalomethanes in sea water and other salt aqueous environments compared to nonsalt water solvated environments.     

A study of the atmospherically important reactions between dimethyl selenide (DMSe) and molecular halogens (X2 = Cl2, Br2, and I2) with ab initio calculations

The atmospherically relevant reactions between dimethyl selenide (DMSe) and the molecular halogens (X(2) = Cl(2), Br(2), and I(2)) have been studied with ab initio calculations at the MP2/aug-cc-pVDZ level of theory. Geometry optimization calculations showed that the reactions proceed from the reagents to the products (CH(3)SeCH(2)X + HX) via three minima, a van der Waals adduct (DMSe:X(2)), a covalently bound intermediate (DMSeX(2)), and a product-like complex (CH(3)SeCH(2)X:HX). The computed potential energy surfaces are used to predict what molecular species are likely to be observed in spectroscopic experiments such as gas-phase photoelectron spectroscopy and infrared matrix isolation spectroscopy. It is concluded that, for the reactions of DMSe with Cl(2) and Br(2), the covalent intermediate should be seen in spectroscopic experiments, whereas, in the DMSe + I(2) reaction, the van der Waals adduct DMSe:I(2) should be observed. Comparison is made with previous related calculations and experiments on dimethyl sulfide (DMS) with molecular halogens. The relevance of the results to atmospheric chemistry is discussed. The DMSeX(2) and DMSe:X(2) intermediates are likely to be reservoirs of molecular halogens in the atmosphere which will lead on photolysis to ozone depletion.     

Ultraviolet photolysis of CH2I2 in methanol: O-H insertion and HI elimination reactions to form a dimethoxymethane product

Ultraviolet photolysis of low concentrations of CH2I2 in methanol solution found that CH2I2 is converted into dimethoxymethane and some H+ and I- products. Picosecond time-resolved resonance Raman (ps-TR3) experiments observed that the isodiiodomethane (CH2I-I) photoproduct decayed faster as the concentration of methanol increases, suggesting that isodiiodomethane is reacting with methanol. Ab initio calculations indicate isodiiodomethane is able to react with methanol via an O-H insertion/HI elimination to form an iodoether (ICH2-O-CH3) and HI products. The iodoether can then further react via another O-H insertion/HI elimination reaction to form the dimethoxymethane (CH3-O-CH2-O-CH3) observed in the photochemistry experiments. A reaction mechanism consistent with these experimental and theoretical observations is proposed.     

Dissociation chemistry of hydrogen halides in water

To understand the mechanism of aqueous acid dissociation, which plays a fundamental role in aqueous chemistry, the ionic dissociation of HX acids (X=F, Cl, Br, and I) in water clusters up to hexamer is examined using density functional theory and M?ller-Plesset second-order perturbation methods (MP2). Further accurate analysis based on the coupled clusters theory with singles and doubles excitations agrees with the MP2 results. The equilibrium structures, binding energies, electronic properties, stretching frequencies, and rotational constants of HX(H(2)O)(n) and X(-)(H(3)O)(+)(H(2)O)(n-1) are calculated. The dissociated structures of HF and HCl can be formed for n>/=4, while those of HBr and HI can be formed for n>/=3. Among these, the dissociated structures of HX (X=Cl, Br, and I) are more stable than the undissociated ones for n>/=4, while such cases for HF would require much more than six water molecules, in agreement with previous reports. The IR spectra of stable clusters including anharmonic frequencies are predicted to facilitate IR experimental studies. Undissociated systems have X-H stretching modes which are highly redshifted by hydration. Dissociated hydrogen halides show three characteristic OH stretching modes of hydronium moiety, which are redshifted from the OH stretching modes of water molecules.     

Zum chemischen Transport von Bismutoxidhalogeniden BiOX (X = Cl,Br, I) mit Halogen,Halogenwasserstoff sowie Wasser und Bestimmung der Molwärmen von BiOX

Chemical Transport of Bismuth Oxide Halides BiOX (X = Cl, Br, I) with X₂, HX and H₂O, and Determination of the Molar Enthalpies of BiOX By comparison of calculated and experimental chemical transport behaviour of BiOX (X = Cl, Br, I) with X₂, HX, and H₂O it was shown, that we understand the transport of BiOCl, BiOBr and BiOI with X₂ and HX in terms of the well known gaseous spezies in the systems. The existence of gaseous complexes Bi(OH)₂X is be concluded from high transport rates of BiOX with water, and their enthalpies and entropies were derived. The molar enthalpies and standard entropies of BiOX were determined by low temperature C_p measurements. (Data see Inhaltsübersicht)     

Direct observation of an isopolyhalomethane O-H insertion reaction with water: picosecond time-resolved resonance Raman (ps-TR3) study of the isobromoform reaction with water to produce a CHBr2OH product

Picosecond time-resolved resonance Raman (ps-TR3) spectroscopy was used to obtain the first definitive spectroscopic observation of an isopolyhalomethane O-H insertion reaction with water. The ps-TR3 spectra show that isobromoform is produced within several picoseconds after photolysis of CHBr3 and then reacts on the hundreds of picosecond time scale with water to produce a CHBr2OH reaction product. Photolysis of low concentrations of bromoform in aqueous solution resulted in noticeable formation of HBr strong acid. Ab initio calculations show that isobromoform can react with water to produce a CHBr2(OH) O-H insertion reaction product and a HBr leaving group. This is consistent with both the ps-TR3 experiments that observe the reaction of isobromoform with water to form a CHBr2(OH) product and photolysis experiments that show HBr acid formation. We briefly discuss the implications of these results for the phase dependent behavior of polyhalomethane photochemistry in the gas phase versus water solvated environments.     

HCHO+X(X=F、Cl、Br)的反应机理

采用CCSD/6-311++G(d,p)//B3LYP/6-311++G(d,p)方法研究了HCHO与卤素原子X(X=F、Cl、Br)的反应机理. 计算结果表明, 卤素原子X(X=F、Cl、Br)主要通过直接提取HCHO中的H原子生成HCO+HX(X=F、Cl、Br). 另外还可以生成稳定的中间体, 中间体再通过卤原子夺氢和氢原子直接解离两个反应通道分别生成HCO+HX(X=F、Cl、Br)和H+XCHO(X=F、Cl、Br). 其中卤原子夺氢通道为主反应通道, HCO和HX(X=F、Cl、Br)为主要的反应产物; 且三个反应的活化能均较低, 说明此类反应很容易进行, 计算结果与实验结果符合很好. 电子密度拓扑分析显示, 在HCHO+X反应通道(b)中出现了T型结构过渡态, 结构过渡态(STS)位于能量过渡态(ETS)之后. 并且按F、Cl、Br的顺序, 结构过渡态出现得越来越晚.     

Density functional theory investigation of the reactions of isodihalomethanes (CH(2)X-X where X = Cl, Br, or I) with ethylene: substituent effects on the carbenoid behavior of the CH(2)X-X species

We investigated the chemical reactions of isodihalomethane (CH(2)X-X) and CH(2)X radical species (where X = Cl, Br, or I) with ethylene and the isomerization reactions of CH(2)X-X using density functional theory calculations. The CH(2)X-X species readily reacts with ethylene to give the cyclopropane product and an X(2) product via a one-step reaction with barrier heights of approximately 2.9 kcal/mol for CH(2)I-I, 6.8 kcal/mol for CH(2)Br-Br, and 8.9 kcal/mol for CH(2)Cl-Cl. The CH(2)X reactions with ethylene proceed via a two-step reaction mechanism to give a cyclopropane product and X atom product with much larger barriers to reaction. This suggests that photocyclopropanation reactions using ultraviolet excitation of dihalomethanes most likely occurs via the isodihalomethane species and not the CH(2)X species. The isomerization reactions of CH(2)X-X had barrier heights of approximately 14.4 kcal/mol for CH(2)I-I, 11.8 kcal/mol for CH(2)Br-Br, and 9.1 kcal/mol for CH(2)Cl-Cl. We compare our results for the CH(2)X-X carbenoids to results from previous calculations of the Simmons-Smith-type carbenoids (XCH(2)ZnX) and Li-type carbenoids (LiCH(2)X) and discuss their differences and similarities as methylene transfer agents.     

Rhenium,part XIV. Studies on the action of hydrogen halides on [ReO2en2]+

Summary The products from the reaction oftrans-dioxobis(ethylenediamine)rhenium(V) halides with hydrogen halides have been investigated. Dilute (2M) and concentrated hydrochloric acid react with (ReO₂en₂)Cl in the cold to give ReO(OH)enCl₂ and IRe(OH)₂enCl₂]Cl respectively, while with hot 6M HCl [ReOCl₅]^2– is formed. Dilute solutions of HX protonate [ReO₂en₂]X (X = Br and I) giving [ReO(OH)en₂]X₂ which are converted slowly into ReO(OH)enBr₂ and [ReO(OH)en2](I₃)₂. Hot and concentrated solutions of HX reduce Re^v in (ReO₂en2 )X (X = Br and I) giving enH₂(ReBr₆) and ReI₄en. The thermal decomposition of (ReO₂en₂)X (X = Cl, Br and I) has been studied by thermogravimetry and a polymeric compound, Re₂O₇en₂, has been isolated by heating (ReO₂en₂)X at 200°. The compounds have been characterised by molecular conductivities, magnetic susceptibility and i.r. spectra.     

Site selectivity in the protonation of a phosphinito bridged Pt(I)-Pt(I) complex: a combined NMR and density-functional theory mechanistic study

The protonation of the dinuclear phosphinito bridged complex [(PHCy2)Pt(mu-PCy2){kappa(2)P,O-mu-P(O)Cy2}Pt(PHCy2)] (Pt-Pt) (1) by Br?nsted acids affords hydrido bridged Pt-Pt species the structure of which depends on the nature and on the amount of the acid used. The addition of 1 equiv of HX (X = Cl, Br, I) gives products of formal protonation of the Pt-Pt bond of formula syn-[(PHCy2)(X)Pt(mu-PCy2)(mu-H)Pt(PHCy2){kappaP-P(O)Cy2}] (Pt-Pt) (5, X = Cl; 6, X = Br; 8, X = I), containing a Pt-X bond and a dangling kappa P-P(O)Cy2 ligand. Uptake of a second equivalent of HX results in the protonation of the P(O)Cy2 ligand with formation of the complexes [(PHCy2)(X)Pt(mu-PCy2)(mu-H)Pt(PHCy2){kappaP-P(OH)Cy2}]X (Pt-Pt) (3, X = Cl; 4, X = Br; 9, X = I). Each step of protonation is reversible, thus reactions of 3, 4, with NaOH give, first, the corresponding neutral complexes 5, 6, and then the parent compound 1. While the complexes 3 and 4 are indefinitely stable, the iodine analogue 9 transforms into anti-[(PHCy2)(I)Pt(mu-PCy2)(mu-H)Pt(PHCy2)(I)] (Pt-Pt) (7) deriving from substitution of an iodo group for the P(OH)Cy2 ligand. Complexes 3 and 4 are isomorphous crystallizing in the triclinic space group P1 and show an intramolecular hydrogen bond and an interaction between the halide counteranion and the POH hydrogen. The occurrence of such an interaction also in solution was ascertained for 3 by (35)Cl NMR. Multinuclear NMR spectroscopy (including (31)P-(1)H HOESY) and density-functional theory calculations indicate that the mechanism of the reaction starts with a prior protonation of the oxygen with formation of an intermediate (12) endowed with a six membered Pt(1)-X...H-O-P-Pt(2) ring that evolves into thermodynamically stable products featuring the hydride ligand bridging the Pt atoms. Energy profiles calculated for the various steps of the reaction between 1 and HCl showed very low barriers for the proton transfer and the subsequent rearrangement to 12, while a barrier of 29 kcal mol(-1) was found for the transformation of 12 into 5.     

OXO(X=Cl,Br)与H(2S)反应机理的量子化学研究

卤素二氧化物自由基(OXO)是重要的同温层物种，在极地的夜间含量尤其丰富，由于其光解产生的卤素原子会造成臭氧的严重损耗，因此愈来愈受到人们的广泛关注嘲．OXO自由基可以通过自由基之间的反应或微波放电等方式获得，有关它与其它大气物种的反应已经进行了许多研究，Bemand等在实验上研究了Cl，H，O与OClO的反应动力学，对于OBrO与H之间的反应目前尚未见实验研究的报道，只有Guhua等在理论上对部分XBrO2(X=H，Cl，Br)同分异构体进行了研究．     

A theoretical study on the formation of EX4+ and E2X5+(E = P, As; X = Br, I) from Ag+ and EX3/X2

The mechanism and the thermodynamics of the formation of EX2+, EX4+ and E2X5+ (E = As, P; X = Br, I) was carefully analyzed with MP2/TZVPP calculations and inclusion of entropy and solvation effects (COSMO model approximating CH2Cl2). Thus, as likely intermediates the complexes of Ag+ and one or two EX3 as well as EX3/X2 were optimized. The global minimum isomers of the Ag(EX3)2+ intermediates were found to be P-coordinated Ag(PI3)2+ and (BrPBr2)Ag(PBr3)+ but exclusively halogen coordinated Ag(X2AsX)2+ complexes. Similarly complicated is the situation for the Ag(EX3)(X2)+ intermediates: (I3E)Ag(I2)+, (BrAsBr2)Ag(Br2)+ and (Br3P)(Br-Br)Ag+ complexes were found to be the global minima. Based on all available results likely mechanisms for the formation of the known PX4+, AsBr4+, P2X5+ salts (X = Br, I) from these intermediates were proposed. An explanation for the failure to prepare an AsI4+ salt is also given.     

Infrafred matrix isolation study of the hydrogen-bonded complexes between ethylene oxide and three hydrogen halides

Codeposition of M/ethylene oxide and M/HX samples, M = argon or nitrogen, X = Cl, Br, I, produced broad infrared bands that can be assigned to the HX stretching band of 1:1 complexes. The corresponding DX bands are sharp and, as in the case of the HX/ dimethylether/M systems, raise the problem of the origin of the band profiles in these medium strength H-bonded systems. Samples annealing and/or concentration increase produced larger aggregates. One of them is identified as the (HX)₂ — ethylene oxide species characterized, on the basis of H/D isotopic dilution, by a bifid structure which the two HX molecules are equivalent. For HI, some additional results suggest an infrared photodissociation of the 1:1 complex in argon matrices and ion pair formation by increasing HI concentration.     

Osmabenzenes from the reactions of HC[triple bond]CCH(OH)C[triple bond]CH with OsX2(PPh3)3 (X = Cl, Br)

Treatment of OsX2(PPh3)3 (X = Cl, Br) with HCCCH(OH)CCH in THF produces OsX2(CH=C(PPh3)CH(OH)CCH)(PPh3)2, which reacts with PPh3 to give osmabenzenes [Os(CHC(PPh3)CHC(PPh3)CH)X2(PPh3)2]+.     

Communication: probing the entrance channels of the X+CH4→HX+CH3 (X = F, Cl, Br, I) reactions via photodetachment of X(-)-CH4

The entrance channel potentials of the prototypical polyatomic reaction family X + CH(4) → HX + CH(3) (X = F, Cl, Br, I) are investigated using anion photoelectron spectroscopy and high-level ab initio electronic structure computations. The pre-reactive van der Waals (vdW) wells of these reactions are probed for X = Cl, Br, I by photodetachment spectra of the corresponding X(-)-CH(4) anion complex. For F-CH(4), a spin-orbit splitting (～1310 cm(-1)) much larger than that of the F atom (404 cm(-1)) was observed, in good agreement with theory. This showed that in the case of the F-CH(4) system the vertical transition from the anion ground state to the neutral potentials accesses a region between the vdW valley and transition state of the early-barrier F + CH(4) reaction. The doublet splittings observed in the other halogen complexes are close to the isolated atomic spin-orbit splittings, also in agreement with theory.     

Ultrafast photochemical dissociation of an equatorial CO ligand from trans(X,X)-[Ru(X)2(CO)2(bpy)] (X = Cl, Br, I): a picosecond time-resolved infrared spectroscopic and DFT computational study

Ultrafast photochemistry of the complexes trans(X,X)-[Ru(X)(2)(CO)(2)(bpy)] (X = Cl, Br, I) was studied in order to understand excited-state reactivity of equatorial CO ligands, coordinated trans to the 2,2'-bipyridine ligand (bpy). TD-DFT calculations have identified the lowest electronic transitions and singlet excited states as mixed X -->bpy/Ru --> bpy ligand to ligand/metal to ligand charge transfer (LLCT/MLCT). Picosecond time-resolved IR spectroscopy in the region of nu(CO) vibrations has revealed that, for X = Cl and Br, subpicosecond CO dissociation is accompanied by bending of the X-Ru-X moiety, producing a pentacoordinated intermediate trans(X,X)-[Ru(X)(2)(CO)(bpy)]. Final movement of an axial halide ligand to the vacant equatorial position and solvent (CH(3)CN) coordination follows with a time constant of 13-15 ps, forming the photoproduct cis(X,X)-[Ru(X)(2)(CO)(CH(3)CN)(bpy)]. For X = I, the optically populated (1)LLCT/MLCT excited state undergoes a simultaneous subpicosecond CO dissociation and relaxation to a triplet IRuI-localized excited state which involves population of an orbital that is sigma-antibonding with respect to the axial I-Ru-I bonds. Vibrationally relaxed photoproduct cis(I,I)-[Ru(I)(2)(CO)(CH(3)CN)(bpy)] is formed with a time constant of ca. 55 ps. The triplet excited state is unreactive, decaying to the ground state with a 155 ps lifetime. The experimentally observed photochemical intermediates and excited states were assigned by comparing calculated (DFT) and experimental IR spectra. The different behavior of the chloro and bromo complexes from that of the iodo complex is caused by different characters of the lowest triplet excited states.     

Water-catalyzed dehalogenation reactions of isobromoform and its reaction products

A combined experimental and theoretical study of the photochemistry of CHBr(3) in pure water and in acetonitrile/water mixed solvents is reported that elucidates the reactions and mechanisms responsible for the photochemical conversion of the halogen atoms in CHBr(3) into three bromide ions in water solution. Ultraviolet excitation at 240 nm of CHBr(3) (9 x 10(-)(5) M) in water resulted in almost complete conversion into 3HBr leaving groups and CO (major product) and HCOOH (minor product) molecules. Picosecond time-resolved resonance Raman (ps-TR(3)) experiments and ab initio calculations indicate that the water-catalyzed O-H insertion/HBr elimination reaction of isobromoform and subsequent reactions of its products are responsible for the production of the final products observed following ultraviolet excitation of CHBr(3) in water. These results have important implications for the phase-dependent behavior of polyhalomethane photochemistry and chemistry in water-solvated environments as compared to gas-phase reactions. The dissociation reaction of HBr into H(+) and Br(-) ions is the driving force for several O-H insertion and HBr elimination reactions and allows O-H and C-H bonds to be cleaved more easily than in the absence of water molecules. This water-catalysis by solvation of a leaving group and its dissociation into ions (e.g., H(+) and Br(-) in the examples investigated here) may occur for a wide range of chemical reactions taking place in water-solvated environments.     

Reactivity of an anionic Pd(II) metallacycle with CH2X2 (X=Cl, Br, I): formal insertion of methylene into a Pd-C(aryl) bond

Whereas the reaction of the anionic palladium metallacycle [K[Pd(CH2CMe2-o-C6H4)(kappa2-Tp)]] with CH2Cl2 leads to the isolation of the stable Pd(IV) chloromethyl complex [Pd(CH2CMe2-o-C6H4)(kappa3-Tp)(CH2Cl)], the analogous reactions with CH2Br2 and CH2I2 give rise to the six membered metallacycles [Pd(CH2CMe2-o-C6H4(CH2))(kappa3-Tp)X](X = Br or I), as a result of the formal insertion of CH2 into the Pd-C(aryl) bond.