Mechanism of silver particle formation during photoreduction using in situ time-resolved SAXS analysis

Formation mechanisms of silver (Ag) particles in an aqueous ethanol solution of poly(N-vinyl-2-pyrrolidone) (PVP) by the photoreduction of AgClO(4) were investigated by means of in situ small-angle X-ray scattering (SAXS) measurements. The kinetics of association process (nucleation, growth, and coalescence) of Ag(0) atoms to produce Ag particles was successfully revealed by the quantitative SAXS analysis for the number-average of radius (R(0)), number of particles (n(Ag)), reduced standard deviation (σ(R)/R(0)), and volume fraction (?(Ag)) of Ag particles produced by the photoreduction. The rate of nucleation and growth process during Ag particle formation strongly depend on the initial metal concentration. The time evolution of radius and number of Ag particles indicates that a mechanism of Ag particle formation is composed of different three processes, that is, reduction-nucleation, Ostwald ripening, and particle coalescence. In a rapid reduction-nucleation process, small nuclei or particles (average radius ～2.5 nm) are produced by an autocatalytic reduction. After the formation of small nuclei or particles proceeds, Ostwald ripening and particle coalescence, predicted by the Lifshitz-Slyozov-Wagner theory (LSW theory), subsequently occur, resulting in the particle growth (average radius ～11.5 nm).     

In situ small-angle X-ray scattering studies during the formation of polymer/silica nanocomposite particles in aqueous solution

This study is focused on the formation of polymer/silica nanocomposite particles prepared by the surfactant-free aqueous emulsion polymerization of 2,2,2-trifluoroethyl methacrylate (TFEMA) in the presence of 19 nm glycerol-functionalized aqueous silica nanoparticles using a cationic azo initiator at 60 °C. The TFEMA polymerization kinetics are monitored using ¹H NMR spectroscopy, while postmortem TEM analysis confirms that the final nanocomposite particles possess a well-defined core–shell morphology. Time-resolved small-angle X-ray scattering (SAXS) is used in conjunction with a stirrable reaction cell to monitor the evolution of the nanocomposite particle diameter, mean silica shell thickness, mean number of silica nanoparticles within the shell, silica aggregation efficiency and packing density during the TFEMA polymerization. Nucleation occurs after 10–15 min and the nascent particles quickly become swollen with TFEMA monomer, which leads to a relatively fast rate of polymerization. Additional surface area is created as these initial particles grow and anionic silica nanoparticles adsorb at the particle surface to maintain a relatively high surface coverage and hence ensure colloidal stability. At high TFEMA conversion, a contiguous silica shell is formed and essentially no further adsorption of silica nanoparticles occurs. A population balance model is introduced into the SAXS model to account for the gradual incorporation of the silica nanoparticles within the nanocomposite particles. The final PTFEMA/silica nanocomposite particles are obtained at 96% TFEMA conversion after 140 min, have a volume-average diameter of 216 ± 9 nm and contain approximately 274 silica nanoparticles within their outer shells; a silica aggregation efficiency of 75% can be achieved for such formulations.

SAXS is used to study the formation of polymer/silica nanocomposite particles prepared by surfactant-free aqueous emulsion polymerization of 2,2,2-trifluoroethyl methacrylate in the presence of silica nanoparticles using a azo initiator at 60 °C.     

光诱导转化法制备单晶Ag纳米三棱体和立方体

The preparation of Ag nanoparticles with the non-spherical shape has been conducted from aqueous solution by photo induced conversion. Ag nanoprisms (80～120nm) and nanocube s(90～200nm) were respectively obtained in the presence of trisodiumcitrate (TSC) orpolyvinylpirrolidon (PVP). These Ag nanoparticles were single-crystals. The results showed that Ag nanoprisms had apreferential growth direction along the Ag(111) axis and Ag nanocubes had a preferential growth direction along the Ag(100) axis. By means of characterization with TEM, ED and UV-V is Spectra, the fundamental analyses and discussion about the changing causes of nanoparticles shape from spherical tonon-spherical have been carried out in the photo induced process.     

Ultrasonically induced Au nanoprisms and their size manipulation based on aging

A simple sonochemical approach was developed for the synthesis of single-crystal Au nanoprisms with triangular or hexagonal shape, 30-40 nm planar dimension, and 6-10 nm thickness in an ethylene glycol solution. It has been shown that ethylene glycol, the surfactant poly(vinylpyrrolidone), and ultrasonic irradiation play important roles in the formation of Au nanoprisms. The subsequent aging induces the growth of Au nanoprisms, which is attributed to the existence of residual reduced Au degrees atoms and Au clusters in the solution. Further growth of Au nanoprisms could be realized by adding a given amount of HAuCl4 to the irradiated and aged Au nanodisk colloidal solution, which provides a simple and an effective method to synthesize Au nanoprisms with different sizes. Au nanoprisms with planar sizes from 70 to 400 nm have been successfully synthesized based on this strategy.     

光还原法制备不同形貌银纳米粒子及其形成机理

光还原法制备不同形貌银纳米粒子及其形成机理;光还原;纳米银;形成机理     

Preparation and characterization of core-shell nanoparticles hardened by gamma-ray

Core-shell nanoparticles have been prepared by irradiation of gamma-ray on block copolymer micelles consisting of hydrophilic polyacrylic acid and hydrophobic polyisoprene with each 40 monomer units. The structure was determined by means of dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The size distribution of the core-shell nanoparticles determined by DLS and AFM was very narrow. The average diameter of the particles decreased from 48 nm for the original micelles to 26 nm by the irradiation of 30 kGy. The core size determined by SAXS combined with DLS was roughly constant of 10 nm, irrespective of irradiation dose, whereas the shell thickness of the micelles was twice as large as the core size, and decreased with increasing irradiation dose.     

Nanoscale Wetting of Single Viruses

The epidemic spread of many viral infections is mediated by the environmental conditions and influenced by the ambient humidity. Single virus particles have been mainly visualized by atomic force microscopy (AFM) in liquid conditions, where the effect of the relative humidity on virus topography and surface cannot be systematically assessed. In this work, we employed multi-frequency AFM, simultaneously with standard topography imaging, to study the nanoscale wetting of individual Tobacco Mosaic virions (TMV) from ambient relative humidity to water condensation (RH > 100%). We recorded amplitude and phase vs. distance curves (APD curves) on top of single virions at various RH and converted them into force vs. distance curves. The high sensitivity of multifrequency AFM to visualize condensed water and sub-micrometer droplets, filling gaps between individual TMV particles at RH > 100%, is demonstrated. Dynamic force spectroscopy allows detecting a thin water layer of thickness ~1 nm, adsorbed on the outer surface of single TMV particles at RH < 60%.     

Bifunctional AgCl/Ag composites for SERS monitoring and low temperature visible light photocatalysis degradation of pollutant

With the assistance of Polyvinylpyrrolidone (PVP), AgCl/Ag composites were fabricated in N, N-Dimethylformamide (DMF) solvent via a photoactivated route. The size of AgCl particles was in the range of 500 nm to 1 μm and the Ag particle's diameter was about 10–20 nm. Different from those core–shell structures reported before, the Ag nanoparticles were dispersed uniformly both on the surface and in the body of AgCl particles. The generation of such kind of composites was resulted from the reducing ability of DMF and light irradiation during the formation of AgCl particles. The as-obtained AgCl/Ag composites presented great activity for both surface-enhanced Raman scattering (SERS) detection and visible light photocatalytic degradation of organic dyes. Additionally, the AgCl/Ag composites could maintain high photocatalytic activity even though the ambient temperature was as low as 15 °C and recycle photocatalysis experiments indicated that the photocatalyst exhibited higher stability. Such kind of AgCl/Ag composites holds great potential for environmental monitoring devices and pollutant treatments.     

Preparation and characterization of stable monodisperse silver nanoparticles via photoreduction

Silver nanoparticles were synthesized by UV irradiation of [Ag(NH₃)₂]⁺ aqueous solution using poly(N-vinyl-2-pyrrolidone) (PVP) as both reducing and stabilizing agents. The formation of silver nanoparticles was confirmed from the appearance of surface plasmon absorption maxima around 420 nm. It was found that the formation rate of silver nanoparticles from Ag₂O was much quicker than that from AgNO₃, and the absorption intensity increased with PVP concentration as well as irradiation time. The maximum absorption wavelength (λ_max) was blue shift with increasing PVP content until 8 times concentration of [Ag(NH₃)₂]⁺ (wt%). The transmission electron microscopy (TEM) showed the resultant particles were 4–6 nm in size, monodisperse and uniform particle size distribution. X-ray diffraction (XRD) demonstrated that the colloidal nanoparticles were the pure silver. In addition, the silver nanoparticles prepared by the method were stable in aqueous solution over a period of 6 months at room temperature (25 °C).     

Low temperature SPME device: A convenient and effective tool for investigating photodegradation of volatile analytes

Hexachlorobenzene (HCB), a model volatile compound, was exposed to UV irradiation (16 W, 254 nm) after being sorbed in an internally cooled or low temperature solid-phase microextraction (LT-SPME) fibre. Photolysis took place directly on the polydimethylsiloxane coating of the LT-SPME fibre, yielding an “in situ” generation of photoproducts. Maintaining the temperature of the cold fibre at 0 °C eliminated, for the first time, problems of analyte losses due to volatilisation, inherent to the conventional room temperature photo-SPME studies. During the present studies, nearly complete photoremoval of HCB could be achieved within 20 min of irradiation. Photoreduction through photodechlorination was shown to be the main decay pathway in which lesser chlorinated congeners were sequentially formed as intermediates. Accordingly, initial generation of pentachlorobenzene was followed in order from 1,2,3,5-tetrachlorobenzene, 1,2,4,5-tetrachlorobenzene and 1,3,5-trichlorobenzene. The present findings were in agreement with previously reported results. Overall, the use of the LT-SPME device as a photoreaction support not only eliminated analyte losses but also greatly facilitated photochemical investigations of volatile compounds in general.     

Synthesis and characterization of silver nanoparticle/kaolinite composites

Ag nanoparticles were synthetized in the interlamellar space of a layered kaolinite clay mineral. Disaggregation of the lamellae of non-swelling kaolinite was achieved by intercalation of dimethyl sulfoxide. The kaolinite was suspended in aqueous AgNO₃ solution and, after adsorption of Ag⁺, the ions were reduced with NaBH₄. The interlamellar space limits particle growth (d_ave=3.8–4.2 nm); however, larger silver particles may be formed on the exterior surface of kaolinite with d_ave=5.6–10.5 nm diameter. The diameter of the particles prepared in this way is depending on the initial AgNO₃ concentration. The silver nanoparticles prepared were characterized by UV–vis spectroscopy, X-ray diffraction (XRD), Small angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS) and Transmission electron microscopy (TEM).     

Mechanistic study of photomediated triangular silver nanoprism growth

This article presents a mechanistic study of the photomediated growth of silver nanoprisms. The data show that the photochemical process is driven by silver redox cycles involving reduction of silver cations by citrate on the silver particle surface and oxidative dissolution of small silver particles by O2. Bis(p-sulfonatophenyl)phenylphosphine increases the solubility of the Ag(+) by complexing it and acts as a buffer to keep the concentration of Ag(+) at 20 microM. The silver particles serve as photocatalysts and, under plasmon excitation, facilitate Ag(+) reduction by citrate. Higher Ag(+) concentrations favor a competitive thermal process, which results in increased prism thickness.     

Biopharmaceutical Evaluation of Capsules with Lyophilized Apple Powder

Apples are an important source of biologically active compounds. Consequently, we decided to model hard gelatin capsules with lyophilized apple powder by using different excipients and to evaluate the release kinetics of phenolic compounds. The apple slices of “Ligol” cultivar were immediately frozen in a freezer (at −35°C) with air circulation and were lyophilized with a sublimator at the pressure of 0.01 mbar (condenser temperature, −85°C). Lyophilized apple powder was used as an active substance filled into hard gelatin capsules. We conducted capsule disintegration and dissolution tests to evaluate the quality of apple lyophilizate-containing capsules of different encapsulating content. Individual phenolic compounds can be arranged in the following descending order according to the amount released from the capsules of different compositions: chlorogenic acid > rutin > avicularin > hyperoside > phloridzin > quercitrin > (−)-epicatechin > isoquercitrin. Chlorogenic acid was the compound that was released in the highest amounts from capsules of different encapsulating content: its released amounts ranged from 68.4 to 640.3 μg/mL. According to the obtained data, when hypromellose content ranged from 29% to 41% of the capsule mass, the capsules disintegrated within less than 30 min, and such amounts of hypromellose did not prolong the release of phenolic compounds. Based on the results of the dissolution test, the capsules can be classified as fast-dissolving preparations, as more than 85% of the active substances were released within 30 min.     

Inorganic nanocrystal-dynamic porous polymer assemblies with effective energy transfer for sensitive diagnosis of urine copper

Despite their remarkable mechanical, optical, and electrical properties, inorganic particles and dynamic polymer assemblies encounter difficulties in their compatibility with regards to structural order and complexity. Here, covalent organic frameworks (COFs) constructed through reversible coupling reactions were exploited as dynamic porous polymers to prepare inorganic nanocrystal-polymer assemblies. Under an in situ growth process, carbon quantum dots (CDs) were gradually prepared in the COF cavity, with a narrow size distribution (2 ± 0.5 nm). The well-established assemblies achieve effective energy transfer from the inorganic to the organic part (efficiency > 80%), thus rendering a ∼130% increase in quantum yield compared with the pristine COF network. Notably, the hybrid material realizes a simple, selective, and sensitive diagnostic tool for urine copper, surpassing the detection limit of COF solid by 150 times. Beyond the scientific and fundamental interests, such hybrid assemblies are attractive from technological perspectives as well, for example, in energy storage, electronics, catalysis, and optics.

Despite their remarkable mechanical, optical, and electrical properties, inorganic particles and dynamic polymer assemblies encounter difficulties in their compatibility with regards to structural order and complexity.     

Lipid Nanoparticles Loaded with Iridoid Glycosides: Development and Optimization Using Experimental Factorial Design

Lipid nanoparticles based on multiple emulsion (W/O/W) systems are suitable for incorporating hydrophilic active substances, including iridoid glycosides. This study involved optimization of composition of lipid nanoparticles, incorporation of active compounds (aucubin and catalpol), evaluation of stability of the resulting nanocarriers, and characterization of their lipid matrix. Based on 3² factorial design, an optimized dispersion of lipid nanoparticles (solid lipid:surfactant—4.5:1.0 wt.%) was developed, predisposed for the incorporation of iridoid glycosides by emulsification-sonication method. The encapsulation efficiency of the active substances was determined at nearly 90% (aucubin) and 77% (catalpol). Regarding the stability study, room temperature was found to be the most suitable for maintaining the expected physicochemical parameter values (particle size < 100 nm; polydispersity index < 0.3; zeta potential > |± 30 mV|). Characterization of the lipid matrix confirmed the nanometer size range of the resulting carriers (below 100 nm), as well as the presence of the lipid in the stable β’ form.     

Biosorbents from Plant Fibers of Hemp and Flax for Metal Removal: Comparison of Their Biosorption Properties

Lignocellulosic fibers extracted from plants are considered an interesting raw material for environmentally friendly products with multiple applications. This work investigated the feasibility of using hemp- and flax-based materials in the form of felts as biosorbents for the removal of metals present in aqueous solutions. Biosorption of Al, Cd, Co, Cu, Mn, Ni and Zn from a single solution by the two lignocellulosic-based felts was examined using a batch mode. The parameters studied were initial metal concentration, adsorbent dosage, contact time, and pH. In controlled conditions, the results showed that: (i) the flax-based felt had higher biosorption capacities with respect to the metals studied than the hemp-based felt; (ii) the highest removal efficiency was always obtained for Cu ions, and the following order of Cu > Cd > Zn > Ni > Co > Al > Mn was found for both examined biosorbents; (iii) the process was rapid and 10 min were sufficient to attain the equilibrium; (iv) the efficiency improved with the increase of the adsorbent dosage; and (v) the biosorption capacities were independent of pH between 4 and 6. Based on the obtained results, it can be considered that plant-based felts are new, efficient materials for metal removal.     

不同形态银纳米粒子的非线性光学特性

通过光诱导生长制备了三角形和圆盘形银纳米粒子, 并采用飞秒Z-scan技术考察了这2种形貌的银纳米粒子在800 nm光波长下的非线性光学特性. 在基态等离子漂白和自由载流子吸收等效应的作用下, 粒径为75 nm的三角形银纳米粒子的非线性透过率随激发光强的增加而呈现由饱和向反饱和非线性吸收过渡的现象; 粒径为35 nm的圆盘形银纳米粒子仅表现出反饱和吸收现象. 实验结果表明, 银纳米粒子非线性吸收过程受粒子形态调控.     

Photovoltage mechanism for room light conversion of citrate stabilized silver nanocrystal seeds to large nanoprisms

We investigate the photoconversion of aqueous 8 nm Ag nanocrystal seeds into 70 nm single crystal plate nanoprisms. The process relies on the excitation of Ag surface plasmons. The process requires dioxygen, and the transformation rate is first-order in seed concentration. Although citrate is necessary for the conversion, and is consumed, the transformation rate is independent of citrate concentration. We propose a mechanism that accounts for these features by coupling the oxidative etching of the seed and the subsequent photoreduction of aqueous Ag(+). The reduced Ag deposits onto a Ag prism of specific size that has a cathodic photovoltage resulting from plasmon "hot hole" citrate photo-oxidation. This photovoltage mechanism also explains recent experimental results involving single and dual wavelength irradiation and the core/shell synthesis of Ag layers on Au seeds.     

Determination of some elements by epithermal neutron activation analysis for the Arctic aerosol

Summary We have determined nineteen trace elements in 685 aerosol filter samples collected during 1964-1978 in northern Finland by the Finnish Meteorological Institute. In this paper we present some procedures and results for very short (~25 s), short (~3-54 min), and medium (12-35 h) lived isotopes as determined by epithermal NAA in conjunction with and without Compton suppression. Elements with a I_γ/σthratio are favorable to be determined by epithermal NAA. Silver was determined by a one minute epithermal irradiation because of a very short ¹¹⁰Ag half-life. Antimony, arsenic, cobalt, bromine, indium, iodine, potassium, silicon, tin, tungsten, and zinc were determined by a ten minute epithermal irradiation. For silver determination, samples were counted without transferring the filter from the irradiated vial, however, for ten minute irradiation all samples were transferred to a non-irradiated vial and counted both in the normal and Compton mode by the HPGe gamma-spectrometry system with a decay time of about 10 minutes and counting time of 15 minutes. Each day a maximum of 16 samples were irradiated and immediately following the short counting, these samples were loaded into an automatic sample changer in sequence of irradiation and counted for an hour in both normal and Compton modes. This has proven to be an extremely cost effective measure thus reducing the need to employ long-lived NAA to analyze other elements such as Ag, Co, Sn and Zn and Ag for air pollution source receptor modeling.     

Supercritical Propanol-Water Synthesis and Comprehensive Size Characterisation of Highly Crystalline anatase TiO2 Nanoparticles

Highly crystalline anatase TiO₂ nanoparticles have been synthesised in less than 1 min in a supercritical propanol-water mixture using a continuous flow reactor. The synthesis parameter space (T, P, concentration) has been explored and the average particle size can be accurately controlled within 10-18 nm with narrow size distributions (2-3 nm). At subcritical conditions amorphous products are obtained, whereas a broad range of T and P in the supercritical regime gives 11-14 nm particles. At high temperature and pressure, the particles size increase to 18 nm. The nanoparticles have been extensively characterised with powder X-ray diffraction (PXRD), transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) with excellent agreement on size and size distribution parameters. The SAXS analysis suggests disk-shaped particles with diameters that are approximately double the height. For comparison, a series of conventional autoclave sol-gel syntheses have been carried out. These also produce phase-pure anatase nanoparticles, but with much broader size distributions and at much longer synthesis times (hours). The study demonstrates that synthesis in supercritical fluids is a very promising method for manipulating the size and size distribution of nanoparticles, thus removing one of the key limitations in many applications of nanomaterials.