Synthesis and characterization of novel indole-containing half-crowns as new emissive metal probes

Two new indole derivatives have been synthesized by a one-pot procedure and their potential as fluorescence probes for metal ions was investigated. The sensor capability of 1 and 2 toward cations such as Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁻ was studied in dichloromethane solution by absorption, fluorescence emission, and ¹H NMR titrations. Both probes showed selectivity for Ag⁺ and Hg²⁺ ions. The results suggest that these compounds may serve as promising models for future design of novel and more potent sensors.     

A convenient synthesis of new thiaazacrown ethers and study of their complexation reactions with some transition metal cations in binary acetonitrile–chloroform mixture using the conductometric method

Three novel thiaazacrown ethers 1, 2 and 3 were synthesized in a simple way and in high yield. The complex formation between Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ metal cations with thiaazacrown ethers 1, 2 and 3 have been studied in acetonitrile:chloroform (1:1) binary solvent system using conductometric technique. The conductance data show that the stochiometry of the complexes with Ag⁺, Cu²⁺ and Zn²⁺ cations is 1:1 (L:M), but in the case of Pb²⁺ and Hg²⁺ cations, a 1:2 (L:M) complex is formed in solutions. The formation constants of the resulting 1:1 complexes were determined from the molar conductance-mole ratio data at 25 °C. It was found that the stability constants of 1-Ag²⁺, 2-Ag⁺ and 3-Ag⁺ complexes are higher than those of their corresponding Zn²⁺ and Cu²⁺ complexes and found to vary in order 3 > 1 > 2 for Ag⁺.     

Lower rim substituted p-tert-butyl calix[4]arene; Part 14. Synthesis, structures and binding studies of calix[4]arene thioamides

A number of p-tert-butylcalix[4]arene thioamides were synthesized and characterized by ¹H-NMR and elemental analysis. Compounds 1–5 are O-substituted derivatives with –CH₂–C(=S)–N–X groups, where NX = morpholidyl, NEt₂, NHC₂H₄Ph, NHCH₂Ph and NHEt, respectively. The X-ray structures of the ligands 1, 3, 5 and of the complex 3·Pb(ClO₄)₂, (compound 6), are presented and their slightly distorted cone conformation is established. The influence of the nature of the thioamide functions (secondary or tertiary) on the extractability of some selected metal cations was investigated. Whereas all these calixarenes show the highest extraction level for Ag⁺, tertiary thioamides are more efficient extractants for Pb²⁺ than secondary thioamides.     

Synthesis and metal ion complexation of acyclic Schiff base podands with lipophilic amide and ester end groups

A series of acyclic Schiff base podands 14?C19 with lipophilic amide and ester end groups were synthesized in good yield and in a simple way. Their transition metal ions complexation was studied using conductometric method in acetonitrile (AN) at 25 °C. Schiff base podands 14?C16 showed a continuous decrease in the molar conductances in their complexation with Hg²⁺, Pb²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ which begins to level off at a mole ratio of 1:1 crown-to-metal indicating the formation of a stable 1:1 complexes. The order of the stability constants of the metal ions studied with the Schiff base podands 14, 15 and 16 is: Hg²⁺ > Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ > Ag⁺. Metal ion complexation by acyclic diamide or diester podands involves presumably the oxygen atoms of the carbonyl groups in addition to the nitrogen atoms of the imino groups.     

The Synthesis and Characterization of a Novel vic-Dioxime and its Mononuclear Complexes Bearing an 18-Membered 2 O 2 S 2 Macro-Cycle and Their Characteristics as Extractants for Transition Metal Ions

A new (E, E)-dioxime (H ₂ L) containing a diazadioxadithia macrocyclic moieties has been synthesized by reaction of an aromatic primary amine with cyanogendi-N-dioxide. The BF₂ ⁺-capped Ni²⁺ mononuclear complex of this new oxime has been synthesized using a precursor hydrogen-bridged mononuclear Ni²⁺ complex. The solvent extraction of transition metal cations by (3) and (6) with picrate anion into chloroform has been studied at 25 °C and UV-visible spectroscopy. The extractability and selectivity of transition metal picrates, (Pb²⁺, Ni²⁺, Co²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ag⁺) has been evaluated. The structures of new compounds are identified by using elemental analysis, ¹H and ¹³C-NMR, IR and MS spectral data.     

Click synthesis of triazole-linked calix[4]arene ionophores. Potentiometric and ESI-MS screening of ion-selectivity

A series of 1,2,3-triazole-linked calix[4]arene ionophores comprised of different O-donor groups (OH, COOEt, CONEt₂) attached either to the lower rim of calix or to the triazole moieties were synthesized to explore their ion-selectivity for the first time in potentiometric transduction. Plasticized PVC membrane electrodes (ISEs) were fabricated, and their potentiometric selectivities were measured toward a series of mono- and divalent metal ions. Structure-ion-selectivity relationship and the structural requirements of the coordination sphere for selective binding were established. ISEs made of calix[4]arene-bis-triazoles were found generally to exhibit distinct Ag⁺ selectivity in the order 3 ≈ 4 > 2 > 1, indicating the beneficial effect of the carboxamide or ester groups in the complexing site. In contrast, calix[4]arene-tetratriazole 5 comprised only sp ² N-donor atoms displayed excellent Cu²⁺ selectivity over a series of alkali-, alkaline earth- and transition metal ions. A unique feature of the outstanding Ag⁺ selective electrodes made of 3 and 4 was recognized and suggested their potential application as Na⁺ ISEs in systems not containing silver ions. Further, the potential use of competitive ESI-MS experiments for screening the binding affinities of ionophores 3–6 to different metal ions was also demonstrated.     

Heavy metal complexation by N-acyl(thio)urea-functionalized cavitands: synthesis, extraction and potentiometric studies

The synthesis and binding properties of resorcinarene-based cavitands functionalized with N-acylthiourea moieties towards different cations are described. Extraction studies with metal (Pb²⁺, Cu²⁺, Ag⁺, Hg²⁺, Cd²⁺, Eu³⁺, Fe³⁺, K⁺, Na⁺, and Ca²⁺) picrates and the incorporation in ion selective electrodes (ISEs), show that there is more than a 40% increase of the Ag⁺ extraction for N-acylthiourea ionophores (2, 3, and 8) in comparison with N-benzoyl-N′-benzylthiourea (9). Ionophore 8, which has a C₃ chain between the platform and the ionophore, extracts two times more Cu²⁺ than the more rigid one (2). Stoichiometry studies showed for ligand 2 a ligand/metal ratio of 1:1, while for model compound 9 a ratio of 1:2 was found. Potentiometric studies of electrodes revealed that cavitands 2, 3, and 8 induce a significantly different selectivity pattern compared to the cation-exchanger used, as well as model compound 9. Especially, a considerable enhancement of the selectivity towards Ag⁺ and Pb²⁺ over K⁺, Ca²⁺, and Na²⁺ ions was observed.     

Crescent aromatic oligothioamides as highly selective receptors for copper(Ⅱ) ion

A series of crescent aromatic oligothioamides(4, 6, 8, 15, and 18) bearing different number of sulfur atoms were designed and synthesized via thionation of their corresponding aromatic oligoamides(3, 5, and 7) using Lawesson's reagent. The X-ray structure of a trimeric analogue(13) revealed the presence of intramolecular three-center hydrogen bonds that are responsible for the rigidification of the molecular backbone. The extraction by these novel receptors toward some representative heavy metal cations(Zn2+, Cd2+, Co2+, Ni2+, Pb2+, and Cu2+) and alkali and alkaline earth metal cations(Li+, Na+, K+, Rb+, Cs+, Ca2+, and Sr2+) demonstrated high efficiency(83.5%–96.4%) and superior selectivity for Cu2+ over other selected metal cations. Particularly, the extractability was correlated to both the number of sulfur atoms and orientation of thiocarbonyl groups as revealed in the order: 6 4 18 15. This is in stark contrast to the oligoamides that only gave much lower extractability(5.9%–16.4%), suggestive of the importance of replacement of carbonyl oxygen atoms with sulfur atoms in the extraction of Cu2+. The complexation behavior of 4, 6, and 8 with Cu2+ was also examined by UV-Vis and NMR techniques.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Synthesis of calix[4]arene(amido)monocrowns and their photoresponsive derivatives

A series of new calix[4]arene(amido)mono-crown compounds have been synthesized through aminolysis of calix[4]arene esters and intramolecular cyclization of the intermediates. The title compounds were converted into their nitro and azo substituted derivatives to provide novel photoresponsive molecular receptors for transition metal ions. Single crystal X-ray analysis of calix[4]arene(ethyleneamido)mono-crown (2a) revealed that the compound is present in a cone conformation with an amido loop that caps the lower rim of calix[4]arene cavity to result in stacking along axis a and axis c to provide supramolecular aggregates in the solid state. Evaluation of synthesized macrocycles in the solution phase for recognition of transition metal cations (Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Pb²⁺, Hg⁺, Hg²⁺, Pd²⁺, and Pt²⁺) by UV-visible spectroscopy revealed that p-tert-butyl-calix[4]arene mono-(amidocrown) 1c selectively shows a blue shift at 38 nm on interaction with Hg⁺ ions.     

Metal ion complexation in acetonitrile by upper-rim allyl-substituted, di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺ on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes is investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, L, L1, and L2, which differ in having no, two and four allyl groups, respectively, on the upper rim of the calix[4]arene scaffold, are utilized for the spectrofluorimetric titration experiments in MeCN. On complexation by alkaline earth metal cations, the emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations and Pb²⁺ interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 99% quenching of the dansyl fluorescence.     

Regulation of metal ion recognition by allosteric effects in thiacalix[4]crown based receptors

Three new ditopic receptors 3a-c based on thiacalix[4]arene of 1,3 alternate conformation possessing two different complexation sites have been designed and synthesized for both soft and hard metal ions. The imino nitrogens bind soft metal ion (Ag⁺/Pb²⁺/Cu²⁺) and the crown moiety binds K⁺ ion. The preliminary investigations show that 3a-c behave as ditopic receptors for Ag⁺/K⁺, Pb²⁺/K⁺, and Cu²⁺/K⁺ ions, respectively. In all the three receptors it was observed that the formation of 3a·Ag⁺/3b·Pb²⁺/3c·Cu²⁺ complex triggers the decomplexation of K⁺ ion from crown moiety and acts as a gateway, which regulates the binding of alkali metal to crown moiety. Thus, allosteric binding between metal ions ‘switch off’ the recognition ability of crown ether ring.     

Synthesis and metal extraction studies of a novel chromogenic 5,17-bisazocalix[4]arenes

Three novel chromogenic cone azocalix[4]arenes 5a–c, which have cavity and the azo groups as metal-binding sites and as coloration sites were synthesized. They were studied by the liquid–liquid extraction of selected metal cations (Sr²⁺, Ag⁺, Hg⁺, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cr³⁺, Al³⁺). Through examination of the extraction, a novel selectivity of these compounds toward Hg²⁺ cations has been determined. Besides, it has been also found that azocalix[4]arene 5c is highly sensitive to acid–base titration, which can be detected by the naked eye.     

Aminopyridyl derivative of thiacalix[4]arene-carboxylic acid as ionizable highly selective Ag+ ionophore

A novel mono-ionizable receptor 2 possessing three aminopyridyl and one carboxylic group in 1,3-alternate conformation based on thiacalix[4]arene, confirmed by single crystal X-ray analysis, was prepared. For competitive solvent extraction of alkali metal (Na⁺, K⁺ and Cs⁺) and some transition metal (Cu²⁺, Zn²⁺, TI⁺, Ag⁺) cations from aqueous solutions into chloroform, it was found that the introduction of proton-ionizable group (carboxylic acid moiety) into the aminopyridyl-thiacalix[4]arene derivative could further improve its Ag⁺ extractability with high selectivity.     

Synthesis and evaluation of a novel pyrenyl-appended triazole-based thiacalix[4]arene as a fluorescent sensor for Ag ion

New fluorescent chemosensors 1,3-alternate-1 and 2 with pyrenyl-appended triazole-based on thiacalix[4]arene were synthesized. The fluorescence spectra changes suggested that chemosensors 1 and 2 are highly selective for Ag⁺ over other metal ions by enhancing the monomer emission of pyrene in neutral solution. However, other heavy metal ions, such as Cu²⁺, and Hg²⁺ quench both the monomer and excimer emission of pyrene acutely. The ¹H NMR results indicated that Ag⁺ can be selectively recognized by the triazole moieties on the receptors 1 and 2 together with the ionophoricity cavity formed by the two inverted benzene rings and sulfur atoms of the thiacalix[4]arene.     

A highly selective colorimetric sensor for Hg2+ based on a copper (II) complex of thiosemicarbazone in aqueous solutions

By applying an indirect strategy, a new copper (Ⅱ) complex of a thiosemicarbazone L has been successfully developed as a colorimetric chemosensor for the sensitive detection of mercury (Ⅱ) ions. In the presence of copper (Ⅱ) ions, the colorless solution of L became yellow; however, upon the addition of traces of mercury (Ⅱ) ions, the yellow color faded to colorless immediately. Other ions, including Fe3+ , Ag+ , Ca2+ , Zn2+ , Pb2+ , Cd2+ , Ni2+ , Co2+ , Cr3+ and Mg2+ had a negligible influence on the probe behavior. The detection limits were 5.0×10 -6 M and 3.0×10 -7 M of Hg2+ using the visual color changes and UV-vis changes respectively. Test strips based on Cu-L were fabricated, which could act as a convenient and efficient Hg2+ test kits.     

Mesitylene based azo-coupled chromogenic tripodal receptors—a visual detection of Ag(I) in aqueous medium

A series of novel tripodal ligands 3a-d, based on a mesitylene anchor, containing aza-thioethers as donor atoms and coupled with 4-(4/3/2-nitrophenyl)azophenol or 4-(2-chlorophenyl)azophenol have been synthesized as chromogenic receptors, which are highly selective for silver(I). The complexation behavior of 3a-d with various metal ions has been evaluated by UV-vis spectrometry in dioxane/water (1:9/v:v) solution at 25 °C. The UV-vis spectra show that the complexation of 3a-c with Ag⁺ have pronounced bathochromic shifts accompanied by a unique color change in the solution from yellow to red, which is visible with the naked eye. The ligands do not show any significant change on addition of other metal ions like Li⁺, Na⁺, K⁺, Sr²⁺, Ca²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Ni²⁺, and Cu²⁺ and thus are highly specific and selective for Ag⁺ in the aqueous medium.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Alkyl Ammonium Ion Selectivity of Hexahomotrioxacalix[3]arene Triamide Derivative having the Intramolecular Hydrogen-Bonding Group

The lower rim functionalized hexahomotrioxacalix[3]arene triamide 4 with cone-conformation was synthesized from triol 1 by a stepwise reaction. The different extractability for alkali metal ions, transition metal ions, and alkyl ammonium ions from water into dichloromethane is discussed. Due to the strong intramolecular hydrogen bonding between the neighboring NH and CO groups in triamide 4, its affinity to metal cations was weakened. Triamide 4 shows a single selectivity to n-BuNH ₃ ⁺ . The anion complexation of triamide 4 was also studied by ¹H NMR titration experiments. Triamide 4 binds halides through the intermolecular hydrogen bonding among the NH hydrogens of amide in a 1:1 fashion in CDCl₃. The association constants calculated from these changes in chemical shifts of the amide protons are K _a = 223 M^?1 for Cl^? and K _a = 71.7 M^?1 for Br^?. Triamide 4 shows a preference for Cl^? complexation than Br^? complexation.     

Synthesis of crownophanes possessing bipyridine moieties: bipyridinocrownophanes exhibiting perfect extractability toward Ag ion

Novel crownophanes with two bipyridine moieties (bipyridinocrownophanes 1a and 1b) were conveniently prepared by means of intramolecular [2+2] photocycloaddition of vinylbipyridine derivatives. In the liquid-liquid extraction of heavy metal cations, 1a and 1b exhibited perfect selectivity toward Ag⁺ with high efficiency. It was found that the ethereal oxygen atoms and the four nitrogen atoms in 1a and 1b acted as ligating sites, according to the high extractability and complexing stability constant for Ag⁺ compared to those of the corresponding pyridinocrownophanes 4a and 4b. ¹H NMR and ESI-MS analyses suggested that the crownophanes formed a 1:1 complexes with the Ag⁺ ion.