新型1,3-二丁基咪唑离子液体中脂肪酶催化折分(R,S)-1-苯乙醇

设计合成6种采用不同1,3-二丁基咪唑阳离子和六氟磷酸(PF6-)或双三氟甲烷磺酰亚胺(TFSI-)阴离子的离子液体.以脂肪酶催化拆分1-苯乙醇为模型反应,分别考察介质、水含量和温度对反应的影响.结果表明,在1,3-二异丁基咪唑六氟磷酸盐([D(i-C4)Im][PF6])离子液体介质中酶的活性和反应性明显高于其它离子液体和正己烷.因此,[D(i-C4)Im][PF6]被确定为反应介质.在最佳条件下,初始反应速率是1.93μmol?mg-1?min-1,1-苯乙醇的转化率达50%,对映体过量值eep99%,酶的半衰期为348h,酶重复使用10次后活性没有明显减少.此外,圆二色谱、内源荧光光谱和光学显微镜研究表明,酶在[D(i-C4)Im][PF6]中保温6d后氨基酸残基的裸露程度略有增加,但其二级结构仍保持稳定,且以天然的折叠球形态存在.     

新型对称烷基咪唑离子液体介质中酶催化合成l-乙酸薄荷酯

设计合成三种新型对称烷基咪唑六氟磷酸盐离子液体——1,3-二正丁基咪唑六氟磷酸盐([DnBIM][PF6]), 1,3-二异丁基咪唑六氟磷酸盐([DiBIM][PF6])和1,3-二仲丁基咪唑六氟磷酸盐([DsBIM][PF6]). 以脂肪酶pseudomonas cepacia催化l-薄荷醇和乙酸酐的酯化过程为模型反应, 分别考察不同介质中酶的活性、反应性和稳定性, 结果表明作为反应介质三种新型离子液体均优于经典离子液体1-正丁基-3-甲基咪唑六氟磷酸盐和有机溶剂正己烷. 在三种新的离子液体中, [DiBIM][PF6]具有最好的亲生物性而被选择作为模型反应介质. 此外, 影响l-薄荷醇转化率的各种因素(包括反应温度、底物投料比、离子液体用量和含水量)及酶的重复利用性也被详细研究. 在最佳反应条件下, l-薄荷醇转化率达到97.4%, 酶促反应速度、平衡转化率和半衰期分别是正己烷中的12.7, 4.6和15.1倍. 脂肪酶重复使用10次后催化活性没有明显减少. 由于三种新型离子液体互为同分异构体, 以上事实还表明除憎水性和亲核性以外离子液体的空间构型也是影响酶行为的一个重要因素.     

新型对称烷基咪唑离子液体介质中酶催化合成ι-乙酸薄荷酯

设计合成三种新型对称烷基咪唑六氟磷酸盐离子液体--1,3.-二正丁基咪唑六氟磷酸盐([DnBIM][PF6]),1,3-二异丁基咪唑六氟磷酸盐([DiBIM][PF6])和1,3-二仲丁基咪唑六氟磷酸盐([DsBIM][PF6]).以脂肪酶pseudomonas cepacia 催化ι-薄荷醇和乙酸酐的酯化过程为模型反应,分别考察不同介质中酶的活性、反应性和稳定性,结果表明作为反应介质三种新犁离子液体均优于经典离子液体1-正丁基-3-甲基咪唑六氟磷酸盐和有机溶剂正己烷.在三种新的离子液体中,[DiBIM][PF6]具有最好的亲生物性而被选择作为模型反应介质.此外,影响ι-薄荷醇转化率的各种因素(包括反应温度、底物投料比、离子液体用量和含水量)及酶的重复利用性也被详细研究.在最佳反应条件下,ι-薄荷醇转化率达到97.4%,酶促反应速度、平衡转化率和半衰期分别是正己烷中的12.7,4.6和15.1倍.脂肪酶重复使用10次后催化活性没有明显减少.由于三种新型离子液体互为同分异构体,以上事实还表明除憎水性和亲核性以外离子液体的空间构型也是影响酶行为的一个重要因素.     

扑尔敏在SDS-[BnMIM]PF_6/CPE上的电催化氧化及电化学动力学研究

利用自组装技术将十二烷基磺酸钠(Sodium Dodecyl Sulfonate,SDS)修饰于离子液体1-苄基-3-甲基咪唑六氟磷酸盐([BnMIM]PF6)修饰碳糊电极上,制备了十二烷基磺酸钠现场自组装膜与离子液体1-苄基-3-甲基咪唑六氟磷酸盐复合修饰碳糊电极(SDS-[BnMIM]PF6/CPE)。研究了马来酸氯苯那敏(Chlorphenamine maleate,CPM,又名扑尔敏)在CPE、[BnMIM]PF6/CPE以及SDS-[BnMIM]PF6/CPE上的电化学行为,并测得了动力学参数。     

碱性离子液体催化甘油合成1,2-甘油碳酸酯(英)

以离子液体为催化剂,在无溶剂体系中,考察了生物质平台化合物甘油转化1,2-甘油碳酸酯的反应.与酸性离子液体和常用无机碱性催化剂相比,碱性离子液体咪唑基1-丁基-3-甲基咪唑([Bmim]Im)、氢氧化1-丁基-3-甲基咪唑([Bmim]OH)、咪唑基1-烯丙基-3-甲基咪唑([Amim]Im)、氢氧化1-烯丙基-3-甲基咪唑([Amim]OH)在甘油与碳酸二甲酯的酯交换反应中表现出优异的活性.其中,以[Bmim]Im离子液体为催化剂时甘油转化率为98.4%和甘油碳酸酯选择性接近100%.另外,该离子液体可以回收重复利用3次后甘油转化率仍可达92%,甘油碳酸酯选择性可近100%.此碱性离子液体催化方法具有反应结果较好、产物分离简单、条件温和以及环境友好等特点.     

水饱和离子液体中脂肪酶催化萘普生甲酯对映选择性水解

 对比研究了水饱和异辛烷和水饱和离子液体1-正丁基-3甲基咪唑六氟磷酸盐([bmim]PF6)中脂肪酶催化萘普生甲酯不对称水解反应. 结果表明,由于离子液体[bmim]PF6同时具有极性和疏水性,因而成为萘普生甲酯不对称水解反应的理想介质. 与水饱和异辛烷相比,水饱和离子液体不仅明显降低了水解反应的平衡常数(K),增大了对映体比率(E),从而有效提高了水解反应的平衡转化率(ceq)和产物的对映体过量值(eep),而且由于离子液体对另一产物甲醇的溶解度高,还明显地提高了脂肪酶的操作稳定性.     

吡咯烷酮酸性离子液体中硼酸酯的催化合成

研究了硼酸与频哪醇和环己醇在离子液体1-甲基-2-吡咯烷酮硫酸氢盐（[Hnmp]HSO4）、1-丁基-3-甲基咪唑四氟硼酸盐（[Bmim]BF4）及1-丁基-3-甲基咪唑六氟磷酸盐([Bmim]PF6)中生成2-环己氧基-4,4,5,5-四甲基-1,3,2-二氧硼烷的酯化反应。 考察了不同离子液体、反应温度、反应时间和离子液体与反应物物质的量比等对反应的影响。 结果表明,当n(硼酸)∶n(频哪醇)∶n(环己醇)∶n([Hnmp]HSO4)=1∶1∶1∶1,反应温度为70 ℃和反应时间为4 h时,硼酸酯的产率为72.5%,离子液体重复使用4次,催化活性无明显降低。     

咪唑根碱性离子液体在水介质Knoevenagel反应中的催化作用

报道了咪唑根1-丁基-3-甲基咪唑([Bmim]Im)碱性离子液体的合成与表征,该离子液体具有强碱性和较好的热稳定性.碱性离子液体[Bmim]Im用于催化水介质中Knoevenagel反应,发挥了碱催化剂与相转移催化剂双重作用.此外,离子液体[Bmim]Im及其水溶液还具有良好的循环使用性能.水介质、低催化剂用量、室温...     

对氨基苯酚在石墨烯-离子液体复合物修饰电极上的电化学行为研究

使用石墨烯(Graphene,GR)和离子液体1-丁基-3-甲基咪唑六氟磷酸盐([BMIM] PF6)作修饰剂,通过壳聚糖(CHIT)成膜,制备了石墨烯-离子液体复合物修饰电极([BMIM] PF6 - GR - CHIT/GCE).在0.1 mol/L磷酸盐缓冲液中,采用循环伏安和微分脉冲伏安法研究了对氨基苯酚在[...     

羟基功能化离子液体与溶菌酶相互作用的研究

采用荧光光谱和紫外吸收光谱研究了羟基功能化离子液体1-(1,2-二羟基丙基)-3-甲基咪唑氯盐([2,3-dhpmim]Cl)、1-(1,2-二羟基丙基)-3-甲基咪唑四氟硼酸盐([2,3-dhpmim]BF4)、1-(1,2-二羟基丙基)-3-甲基咪唑六氟磷酸盐([2,3-dhpmim]PF6)与溶菌酶的相互作用。研究发现此3种离子液体对溶菌酶的荧光猝灭均为静态猝灭;同步荧光显示离子液体与溶菌酶肽链上的色氨酸残基作用,色氨酸残基微环境发生改变;结合常数和结合位点数按照[2,3-dhpmim]Cl、[2,3-dhpmim]BF4、[2,3-dhpmim]PF6顺序依次增大,并随温度的升高而增大。     

Raman and ab initio studies of simple and binary 1-alkyl-3-methylimidazolium ionic liquids

Raman spectra of the ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]), 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), and binary mixtures thereof, have been assigned using ab initio MP2 calculations. The previously reported anti and gauche forms of the [C4mim]+ cation have been observed, and this study reveals this to be a general feature of the long-chain 1-alkyl derivatives. Analysis of mixtures of [C6mim]Cl and [C6mim][PF6] has provided information on the nature of the hydrogen bonding between the imidazolium headgroup and the anions, and the invariance of the essentially 50:50 mixture of the predominant conformers informs on the nature of glass formation in these systems.     

Synthesis of nitrosylruthenium complexes containing 2,2':6',2"-terpyridine by reactions of alkoxo complexes with acids

Nitrosylruthenium complexes containing 2,2':6',2"-terpyridine (terpy) have been synthesized and characterized. The three alkoxo complexes trans-(NO, OCH3), cis-(Cl, OCH3)-[RuCl(OCH3)(NO)(terpy)]PF6 ([2]PF6), trans-(NO, OC2H5), cis-(Cl, OC2H5)-[RuCl(OC2H5)(NO)(terpy)]PF6 ([3]PF6), and [RuCl(OC3H7)(NO)(terpy)]PF6 ([4]PF6) were synthesized by reactions of trans-(Cl, Cl), cis-(NO, Cl)-[RuCl2(NO)(terpy)]PF6 ([1]PF6) with NaOCH3 in CH3OH, C2H5OH, and C3H7OH, respectively. Reactions of [3]PF6 with an acid such as hydrochloric acid and trifluoromethansulforic acid afford nitrosyl complexes in which the alkoxo ligand is substituted. The geometrical isomer of [1]PF6, trans-(NO, Cl), cis-(Cl, Cl)-[RuCl2(NO)(terpy)]PF6 ([5]PF6), was obtained by the reaction of [3]PF6 in a hydrochloric acid solution. Reaction of [3]PF6 with trifluoromethansulforic acid in CH3CN gave trans-(NO, Cl), cis-(CH3CN, Cl)-[RuCl(CH3CN)(NO)(terpy)]2+ ([6]2+) under refluxing conditions. The structures of [3]PF6, [4]PF6.CH3CN, [5]CF3SO3, and [6](PF6)2 were determined by X-ray crystallograpy.     

Nanostructural organization and anion effects on the temperature dependence of the optical Kerr effect spectra of ionic liquids

The intermolecular spectra of three imidazolium ionic liquids were studied as a function of temperature by the use of optical heterodyne-detected Raman-induced Kerr effect spectroscopy. The ionic liquids comprise the 1,3-pentylmethylimidazolium cation ([C(5)mim]+), and the anions, bromide (Br-), hexafluorophosphate (PF(6)-), and bis(trifluoromethanesulfonyl)imide (NTf(2)-). Whereas the optical Kerr effect (OKE) spectrum of [C(5)mim][NTf(2)] is temperature-dependent, the OKE spectra of [C(5)mim]Br and [C(5)mim][PF6] are temperature-independent. These results are surprising in light of the fact that the bulk densities of these room temperature ionic liquids (RTILs) are temperature-dependent. The temperature independence of the OKE spectra and the temperature dependence of the bulk density in [C(5)mim]Br and [C(5)mim][PF(6)] suggest that there are inhomogeneities in the densities of these liquids. The existence of density inhomogeneities is consistent with recent molecular dynamics simulations that show RTILs to be nanostructurally organized with nonpolar regions arising from clustering of the alkyl chains and ionic networks arising from charge ordering of the anions and imidazolium rings of the cations. Differences in the temperature dependences of the OKE spectra are rationalized on the basis of the degree of charge ordering in the polar regions of the RTILs.     

Self-assembly of electroactive thiacrown ruthenium(II) complexes into hydrogen-bonded chain and tape networks

A family of coordination complexes has been synthesized, each comprising a ruthenium(II) center ligated by a thiacrown macrocycle, [9]aneS(3), [12]aneS(4), or [14]aneS(4), and a pair of cis-coordinated ligands, niotinamide (nic), isonicotinamide (isonic), or p-cyanobenzamide (cbza), that provide the complexes with peripherally situated amide groups capable of hydrogen bond formation. The complexes [Ru([9]aneS(3))(nic)(2)Cl]PF(6), 1(PF(6)); [Ru([9]aneS(3)) (isonic)(2)Cl]PF(6), 2(PF(6)); [Ru([12]aneS(4))(nic)(2)](PF(6))(2), 3(PF(6))(2); [Ru([12]aneS(4))(isonic)(2)](PF(6))(2), 4(PF(6))(2); [Ru([12]aneS(4)) (cbza)(2)](PF(6))(2), 5(PF(6))(2); [Ru([14]aneS(4))(nic)(2)](PF(6))(2), 6(PF(6))(2); [Ru([14]aneS(4))(isonic)(2)](PF(6))(2), 7(PF(6))(2); and [Ru([14]aneS(4))(cbza)(2)](PF(6))(2), 8(PF(6))(2) have been characterized by NMR spectroscopy, mass spectrometry, and elemental analysis. UV/visible spectroscopy shows that each complex exhibits an intense high-energy band (230-255 nm) assigned to a pi-pi* transition and a lower energy band (297-355 nm) assigned to metal-to-ligand charge-transfer transitions. Electrochemical studies indicate good reversibility for the oxidations of complexes with nic and isonic ligands (|I(a)/I(c)| = 1; DeltaEp < 100 mV), In contrast, complexes 5 and 8, which incorporate cbza ligands, display oxidations that are not fully electrochemically reversible (|I(a)/I(c)| = 1, DeltaEp > or = 100 mV). Metal-based oxidation couples between 1.32 and 1.93 V versus Ag/AgCl can be rationalized in term of the acceptor capabilities of the thiacrown ligands and the amide-bearing ligands, as well as the pi-donor capacity of the chloride ligands in compounds 1 and 2. The potential to use these electroactive metal complexes as building blocks for hydrogen-bonded crystalline materials has been explored. Crystal structures of compounds 1(PF(6)).H(2)O, 1(BF(4)).2H(2)O, 2(PF(6)), 3(PF(6))(2), 6(PF(6))(2)CH(3)NO(2), and 8(PF(6))(2) are reported. Four of the six form amide-amide N-H...O hydrogen bonds leading to networks constructed from amide C(4) chains or tapes containing R(2)(2) (8) hydrogen-bonded rings. The other two, 2(PF(6)) and 8(PF(6)), form networks linked through amide-anion N-H...F hydrogen bonds. The role of counterions and solvent in interrupting or augmenting direct amide-amide network propagation is explored, and the systematic relationship between the hydrogen-bonded networks formed across the series of structures is presented, showing the relationship between chain and tape arrangements and the progression from 1D to 2D networks. The scope for future systematic development of electroactive tectons into network materials is discussed.     

The effect of C2 substitution on melting point and liquid phase dynamics of imidazolium based-ionic liquids: insights from molecular dynamics simulations

Using molecular dynamics simulations, the melting points and liquid phase dynamic properties were studied for four alkyl-imidazolium-based ionic liquids, 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), 1-n-butyl-2,3-dimethylimidazolium hexafluorophosphate ([BMMIM][PF6]), 1-ethyl-3-methylimidazolium hexafluorophosphate ([EMIM][PF6]), and 1-ethyl-2,3-dimethylimidazolium hexafluorophosphate ([EMMIM][PF6]), respectively. Experimentally it has been observed that the substitution of a methyl group for a hydrogen at the C2 position of the cation ring leads to an increase in both the melting point and liquid phase viscosity, contrary to arguments that had been made regarding associations between the ions. The melting points of the four ionic liquids were accurately predicted using simulations, as were the trends in viscosity. The simulation results show that the origin of the effect is mainly entropic, although enthalpy also plays an important role.