Influence of EDTA on the hydrothermal synthesis of CdTe nanocrystallites

Transformation from Te nanorods to CdTe nanoparticles was achieved with the assistance of EDTA as a ligand under hydrothermal conditions. Experimental results showed that at the beginning of reaction Te nucleated and grew into nanorods. With the proceeding of reaction, CdTe nucleus began to emerge on the surface, especially on the tips of Te nanorods. Finally, nearly monodispersed hexagonal CdTe nanoparticles with diameters of about 200 nm were obtained. The effects of EDTA on the morphology and formation of CdTe nanoparticles were discussed in consideration of the strong ligand-effect of EDTA, which greatly decreased the concentration of Cd²⁺. Furthermore, the possible formation process of CdTe nanoparticles from Te nanorods was further proposed. The crystal structure and morphology of the products were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

Synthesis of CdSe/CdTe nanobarbells

Synthesis of monodisperse samples of CdSe nanorods with CdTe tips is achieved using the mechanism of rod nucleated growth to form CdSe/CdTe nanobarbells. This synthesis produces a nanocrystal displaying "type-II" behavior with a morphology that is particularly well suited for internal exciton separation and carrier transport.     

Synthesis of CdTe nanocrystals using Te nanorods as the Te source and the formation of microtubes with red fluorescence

Here, we report an alternative route to the preparation of highly luminescent CdTe nanocrystals (NCs) using Te nanorods instead of freshly prepared NaHTe as the Te source via a one-pot route under hydrothermal conditions. Furthermore, microtubes with red fluorescence were generated via simply aging the above CdTe NC suspension under ambient conditions.     

CdTe纳米棒-过氧化氢化学发光体系的研究

在水相中合成了以巯基乙酸和L-半胱氨酸为稳定剂的CdTe纳米棒。研究发现在碱性溶液中H2O2能直接氧化CdTe纳米棒产生强烈的化学发光,化学发光的强度与CdTe纳米棒尺寸大小相关,且一些表面活性剂能强烈敏化该反应。     

Highly sensitive fluorescence determination of silver ions based on functionalized cadmium telluride nanorods

Microchimica Acta - Water-soluble fluorescent CdTe nanorods (NRs) capped with L-cysteine (Cys) and thioglycolic acid (TGA) were prepared for optical determination of silver ions. These NRs are...     

Photophysical Properties of Au‐CdTe Hybrid Nanostructures of Varying Sizes and Shapes

We design well‐defined metal‐semiconductor nanostructures using thiol‐functionalized CdTe quantum dots (QDs)/quantum rods (QRs) with bovine serum albumin (BSA) protein‐conjugated Au nanoparticles (NPs)/nanorods (NRs) in aqueous solution. The main focus of this article is to address the impacts of size and shape on the photophysical properties, including radiative and nonradiative decay processes and energy transfers, of Au‐CdTe hybrid nanostructures. The red shifting of the plasmonic band and the strong photoluminescence (PL) quenching reveal a strong interaction between plasmons and excitons in these Au‐CdTe hybrid nanostructures. The PL quenching of CdTe QDs varies from 40 to 86 % by changing the size and shape of the Au NPs. The radiative as well as the nonradiative decay rates of the CdTe QDs/QRs are found to be affected in the presence of both Au NPs and NRs. A significant change in the nonradiative decay rate from 4.72×10⁶ to 3.92×10¹⁰ s^?1 is obtained for Au NR‐conjugated CdTe QDs. It is seen that the sizes and shapes of the Au NPs have a pronounced effect on the distance‐dependent energy transfer. Such metal‐semiconductor hybrid nanostructures should have great potentials for nonlinear optical properties, photovoltaic devices, and chemical sensors.     

An immediate luminescence enhancement method for determination of vitamin B1 using long-wavelength emitting water-soluble CdTe nanorods

A method for determination of vitamin B₁ has been developed that is based on the enhancement effect of vitamin B₁ on the luminescence of water-soluble CdTe nanorods modified with thioglycolic acid and cysteine. The effect of variables including the size of the nanorods on the enhancement of luminescence have been investigated. A preliminary mechanistic study showed that the passivating action of vitamin B₁ on the surface of the CdTe nanorods is likely to be responsible for the enhancement. Interferences by shortwave fluorescence are effectively eliminated because measurements are performed in the near-infrared. Due to the near-infrared measurement character, the fluorescence interference of vitamin B₂ can be effectively eliminated. Under the optimum conditions, the extent of luminescence enhancement is proportional to the concentration of vitamin B₁ in the range from 0.1 to 3.0 μmol L^?1 and the detection limit is 0.03 μmol L^?1. The relative standard deviation for 2.0 μmol L^?1 vitamin B₁ is 1.3% (n?=?6). The method is highly sensitive and selective, avoids the sample treatment needed in other procedures, and can be applied to the determination of vitamin B₁ in real samples with satisfactory results.     

Formation of different gold nanocrystal core-resin shell structures through the control of the core assembly and shell polymerization

The formation of different Au nanocrystal core-resin shell structures through the control of the nanocrystal assembly and shell polymerization is investigated. 4-Mercaptophenol is employed together with formaldehyde as the resin monomers. 4-Mercaptophenol molecules bond to the surface of Au nanocrystals so that the resultant phenolic resin can intimately encapsulate Au nanocrystals. The morphologies of the obtained structures are determined by the nanocrystal assembly and the monomer polymerization behaviors, which are controlled by the solution pH as well as the monomer amounts. At pH = 8-9, Au nanorods are assembled and fused together under hydrothermal conditions in a preferential end-to-end manner. The fused structures are coated with a layer of resin, with the thickness controlled by the supplied amounts of the monomers. At pH = ～10, Au nanorods are coated with resin of controllable thicknesses and separated from each other. The resin-coated Au nanorods are stable in both aqueous and nonaqueous solutions. At pH = ～12, Au nanorods are coated with a thin layer of resin and assembled together in a side-by-side manner. A similar assembly and resin coating behavior is also observed with Au nanopolyhedrons. Moreover, plasmonic-fluorescent bifunctional structures are readily produced by incorporating CdTe nanocrystals in the resin shell that is coated on Au nanocrystals, owing to the presence of a number of thiol groups in the resin shell.     

Near-Infrared Fluorimetric Determination of Copper(Ⅱ) Ions Using CdHgTe Nanorods as Probe

Stable water‐soluble CdHgTe nanorods with an emission wavelength at 722 nm, obtained by doping Hg²⁺ into CdTe nanorods, has been used as a near‐infrared region (NIR) probe to investigate their interaction with copper(II) ions. A new fluorimetric method for the determination of copper(II) ions has been developed based on the quenching effect of copper(II) ions on the emission of CdHgTe nanorods. The mechanism studies show that an effective electron transfer from nanorods to the copper(II) ions occurred based on the coordination reaction between copper(II) ions and the carboxyl groups on the nanorods surface, which could be responsible for the emission quenching of CdHgTe nanorods. Under optimum conditions, the linear range of the calibration curve for the determination of Cu²⁺ is from 8.0×10^?9 to 1.0×10^?6 mol/L and the detection limit is 2.0×10^?9 mol/L. Owing to low background interference of NIR measurement, the proposed method displays relative high sensitivity and selectivity. Especially, some physiologically important cations almost do not interfere with the determination of Cu²⁺. The proposed method was also applied to the determination of trace Cu²⁺ in real aqueous samples with satisfactory results.     

A facile method for gold decoration of Te@CdTe nanorods in aqueous solution

Colloidal synthesis of metal-semiconductor hybrid nanostructures is mainly achieved in organic solution. In some applications of hybrid nanoparticles relevant in aqueous media, phase transfer of hydrophobic metal-semiconductor hybrid nanostructures is essential. In this work, we present a simple method for direct synthesis of water-soluble gold (Au) decorated Te@CdTe hybrid nanorods (NRs) at room temperature by using aqueous Te@CdTe NRs as templates, which were preformed by using CdTe nanocrystals (NCs) as precursor in the presence of hydrazine hydrate (N(2)H(4)). Our results showed that NRs were decorated with Au islands both on tips and along the surface of the NRs. The size and density of Au islands can be controlled by varying the amount of Au precursor (mixture of HAuCl(4) and thioglycolic acid (TGA)) and TGA/HAuCl(4) ratio. A possible growth mechanism for the Au decoration of Te@CdTe NRs is concluded as three steps: (1) the formation of AuTe(1.7) via the substitution reaction of Cd(2+) by Au(3+), (2) adsorption of Au-TGA complex onto the preformed AuTe(1.7) anchors and following reduction by CdTe and N(2)H(4), leading to the formation of small Au NCs, (3) Au NCs grow to bigger ones, followed by reduction of more Au precursor by N(2)H(4).     

(Yb3+, Mn2+) Co-doped CdTe nanocrystals with enhanced quantum yields and red-shift emission

We prepared the nanocrystals (NCs) of CdTe, CdTe:Yb, and CdTe:Yb, Mn vis water phase synthesis and examined their structural, morphological, and optical properties. All NCs have a particle diameter of about 2–4 nm, and the monodispersed, uniform spherical, cubic structure of the CdTe NC remains largely unchanged after the doping with Yb and Mn. According to the X-ray diffraction results, the CdTe, CdTe:Yb, and CdTe:Yb, Mn NCs all have a cubic structure, and the diffraction peak of CdTe:Yb NC is at a lower 2θ angle compared with that of the CdTe NC. With the CdTe NC as the reference, the UV–Vis absorption of the CdTe:Yb and the CdTe:Yb, Mn NCs exhibits a blueshift and a redshift, and the emission of CdTe:Yb and CdTe:Yb, Mn has a blueshift of about 12 nm and a redshift of about 73 nm, respectively. The CdTe:Yb, Mn NCs have higher quantum yields than the CdTe:Yb NC, and the quantum yield is the highest when CdTe is doped with 1:1 Mn²⁺/Yb³⁺. In addition, both the CdTe:Yb and CdTe:Yb, Mn NCs have a shorter fluorescence lifetime than the CdTe NC.     

CdTe量子点与蛋白质相互作用的荧光猝灭效应

本文在水热法合成水溶性CdTe及核壳结构CdTe/CdS量子点的基础上,分别研究了细胞色素c对CdTe量子点及CdTe/CdS核壳量子点荧光的猝灭效应和CdTe量子点对牛血清白蛋白荧光的猝灭效应,并阐述了猝灭机理。结果显示,细胞色素c对CdTe量子点的荧光猝灭效应具有一定的粒径依赖性,粒径越小,猝灭效应越强;细胞色素c对CdTe/CdS核壳量子点的猝灭效应比对CdTe量子点的更强,揭示了受激电子的表面传递机理。CdTe量子点通过松散牛血清白蛋白的螺旋结构而猝灭其荧光。     

配体对CdTe量子点与BSA的选择性相互作用的影响

以巯基乙酸(TGA)、巯基丙酸(MPA)、巯基甘油(TG)、L-半胱氨酸(L-cys)和谷胱甘肽(GSH)等5种巯基分子为稳定剂, 水相合成了5种CdTe量子点. 以牛血清白蛋白(BSA)作为靶分子, 通过吸收光谱、荧光光谱和时间分辨荧光动力学等手段研究了各种配体分子稳定的CdTe量子点与BSA的直接相互作用. 结果表明, 5种量子点均能有效猝灭BSA的荧光, 其猝灭程度按配体次序为GSH>L-cys>TGA>TG>MPA; 而BSA对不同配体稳定的CdTe量子点的荧光光谱的影响则具有明显的选择性. BSA对TGA-CdTe和MPA-CdTe量子点的荧光先敏化增强而后猝灭下降; L-cys分子由于同时具有氨基和羧基而与BSA的相互作用较强, 因此BSA能显著猝灭L-cys-CdTe量子点的荧光; 而BSA对TG-CdTe量子点的荧光猝灭程度较小; GSH分子的空间效应使GSH-CdTe量子点的荧光被BSA猝灭的程度最小. 吸收光谱和时间分辨荧光动力学研究表明, 5种量子点与BSA之间的相互作用均为静态过程. 探讨了量子点的配体分子结构与蛋白质的相互作用机理.     

Prototype of immunochromatographic assay strips using colloidal CdTe nanocrystals as biological luminescent label

Colloidal semiconductor nanocrystals have attracted considerable attention as a novel biological luminescent label. The bioinorganic conjugates of luminescent CdTe nanocrystals and protein, including CdTe/BSA (bovine serum albumin) and CdTe/MAB (mouse monoclonal antibody against hepatities B surface antigen), were formed via electrostatic/coordination self-assembly. Pure CdTe nanocrystals, CdTe/BSA and CdTe/MAB were used in the immunochromatographic assay experiments, respectively. And the results indicated that CdTe nanocrystals could be used and developed as a novel label with good stability, high sensitivity and facile determination of several analytes in immunochromatographic assay strips.     

量子点-卟啉纳米复合体系在肿瘤细胞成像中的应用

本文合成了高荧光量子产率、单分散性好的水溶性CdTe量子点(quantum dots,QDs),并与α,β,γ,δ-四(1-甲基吡啶嗡-4-基)卟吩对甲苯磺酸盐(TMPyP)组装成QDs-TMPyP纳米复合物,研究了该复合物检测DNA的机理以及肿瘤细胞成像。结果显示,QDs-TMPyP纳米复合物通过光致电子转移机制检测DNA,当CdTe QDs和CdTe QDs-TMPyP浓度低于1.0μmol/L时,HeLa肿瘤细胞存活率达92%以上,表现出低的细胞毒性。0.2μmol/L CdTe QDs-TMPyP作用于肿瘤细胞时,细胞生长状态良好,对细胞内能谱分析发现细胞内含有Cd和Te原子。CdTe QDs-TMPyP复合物比CdTe QDs更易被HeLa细胞摄取,利用量子点荧光成功实现了细胞核内成像,为宫颈癌细胞药物输送和细胞成像的深入研究打下基础。     

利用水相合成的量子点标记木瓜蛋白酶的研究

利用半导体纳米粒子 (也称半导体量子点 ,Quantum Dots,以下简称 QDs)和表面修饰技术制备的半导体荧光探针具有极其优良的光谱特征和光化学稳定性 [1] .自 1 997年以来 ,随着量子点制备技术的不断提高 ,量子点在生物医学方面已有应用 . 1 998年 ,Alivisatos[1] 和 Nie[2 ] 两个研究小组分别将结合了生物分子的 QDs作为荧光探针应用于生物体系 ,开创了纳米粒子应用的新领域 .最近 Nie等 [3 ]在利用量子点编码生物分子的研究中取得了突破性进展 .目前 ,纳米粒子与生物分子的连接以共价键方式相结合最为常见 [1,2 ,4 ,5] ,而且在这些应用中…     

Facile synthesis of nanocrystal encoded fluorescent silica microspheres

Monodisperse CdTe composite microspheres with a spherical shape were prepared using organosilane chemicals in aqueous solution. CdTe nanocrystals (NCs) were loaded into the matrix of silica microspheres during the formation of composite microspheres. Detailed characterization of the CdTe composite microspheres by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and spectrofluorimeter was performed to elucidate the morphology and fluorescence of the composite microspheres. In contrast to CdTe NCs in aqueous solution, CdTe NCs in the composite microspheres revealed high stability and fluorescence due to the confined effects of silica matrix. In addition, multicolored CdTe QDs were encoded into the microspheres at precise ratios.     

Synthesis of CdTe/SiO_2 Composites and Their Fluorescence Properties

Thioglycolic acid(TGA)-stabilized CdTe nanocrystals(NCs) were prepared with sodium tellurite as tellurium source,which avoids the cumbersome processes associated with H2Te or NaHTe sources.Fluorescent CdTe/SiO2 composites were synthesized by a sol-gel method without the exchange of surface ligands.The phase structure of CdTe NCs was investigated by X-ray diffractometry.For comparison,some characterizations were done for both the CdTe NCs and the composites.CdTe NCs and CdTe/SiO2 composites were characterize...     

水溶性CdTe量子点的合成及其用于荧光猝灭法测定肌红蛋白

以3-巯基丙酸为稳定剂,合成了具有特殊光学性质的水溶性CdTe量子点,其最大发射波长位于544 nm.利用荧光光谱、紫外可见光谱及圆二色光谱法系统的研究了CdTe量子点与肌红蛋白(Mb)二者结合前后体系光谱的变化,从而证实了CdTe量子点与Mb之间静电结合反应的特征.在pH 7.0的PBS缓冲液中,用CdTe量子点作为荧光探针研究了肌红蛋白与量子点的相互作用,并基于肌红蛋白对CdTe量子点有显著的荧光猝灭作用,建立了肌红蛋白的快速检测方法.在最佳实验条件下,该体系荧光强度的猝灭程度(△F)与肌红蛋白质量浓度呈良好的线性关系,线性范围为0.3～24 μg/mL,检出限为0.13 μg/mL.该方法已对合成样品中肌红蛋白进行检测,并用于人体尿样中肌红蛋白的测定.     

有机相CdTe量子点/铕/聚甲基丙烯酸甲酯复合体系的发光性质

以十二烷基硫醇为稳定剂,在有机相中合成了平均粒径为4.5 nm的有机相CdTe量子点。 以三异丙氧基铕,有机相CdTe量子点为原料,用本体聚合反应得到的聚甲基丙烯酸甲酯作聚合物介质,将量子点与聚合物溶液或稀土铕离子、量子点与聚合物溶液分别通过范德华力或离子配位作用直接复合,分别得到CdTe/聚甲基丙烯酸甲酯和CdTe/铕/聚甲基丙烯酸甲酯。 采用红外光谱、紫外光谱、荧光光谱、扫描电子显微镜、透射电子显微镜对其结构进行表征。 结果表明,复合得到的CdTe量子点/聚甲基丙烯酸甲酯的溶液或薄膜在紫外到可见光区激发下均能发出很亮的红光,当稀土铕离子同时与量子点直接复合到聚合物中时,聚合物的溶液和薄膜仍可以发出量子点的发光,但其荧光相对强度下降,说明稀土铕离子与CdTe量子点的发光均由于它们之间的相互作用而猝灭。