Effect of Cationic and Zwitterionic Surfactants on Contact Angle of Quartz–Water–Crude Oil System

The influences of four cationic surfactants hexadecyl glycidyl ether ammonium chloride and four zwitterionic surfactants hexadecyl glycidyl ether glycine Betaine solutions on contact angle of crude oil on a quartz surface were investigated using a captive drop method. The effects of surfactant type, structure, and concentration on contact angle were expounded. From obtained results it appears that the adsorbed surfactant at oil–water interface reduces the interfacial tension and the adsorption at quartz–water interface improves interfacial free energy, which results in reducing the stable value of contact angle and weakening dynamic behavior. At high concentration, the zwitterionic surfactant with branched-chain may form semi-micelle at quartz surface. As a result, the stable value of contact angle passes through a sharp minimum with the increasing concentration.     

支化侧链偶氮无规共聚物中空和类囊泡聚集体研究

研究了支化侧链型偶氮无规共聚物(PMAPB6P-AA)在THF/H2O混合溶液中的自组装行为.研究发现,通过缓慢增加体系的水含量,可以制备出具有中空结构的非球形聚集体.调节聚合物的初始浓度,可以得到不同粒径的聚集体.聚集体中偶氮生色团的光致异构化速率与异构化程度随聚合物初始浓度的增大而减小.在此基础上,采用更加缓慢的增加水含量的方法,使聚合物分子进行充分的疏水聚集与H-聚集,制备出类囊泡状聚集体.在紫外光照射条件下,观察到类囊泡聚集体发生了光致解聚集.     

Nanofibrosis of uncrystallizable poly(lactide‐co‐glycolide) via phase separation

Poly(lactide‐co‐glycolide) (PLGA) copolymers are a kind of biocompatible and biodegradable materials being widely used in tissue engineering. However, phase separation had not been reported successfully in fabricating these amorphous polymers into nanofibrous matrix, although this technique had shown advantages over electrospinning in producing a nanofiber network. In this study, tetrahydrofuran (THF)/H₂O solvent pairs were found suitable solvents to induce the formation of uniform PLGA gel at selected gelation temperatures. The results indicated that fine nanofibrous structures with fiber diameter around 40–60 nm could be obtained following the steps of gel formation, solvent extraction, and freeze‐drying, by controlling the concentration of PLGA/THF/H₂O solution, THF/H₂O ratio, and gelation temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Polymerization of methyl methacrylate using a metallocene catalyst system

Methyl methacrylate was polymerized with Cp₂YCl(THF) or IVB group metallocene compounds (i.e., Cp₂ZrCl₂ and Cp₂HfCl₂, etc.), in the presence of a Lewis acid like Zn(C₂H₅)₂. The Lewis acid was complexed with methyl methacrylate, which avoided the metallocene compounds being poisoned with a functional group. A living polymerization was promoted through the use of metallocene/MAO/Zn(C₂H₅)₂, which gave tactic poly(methyl methacrylate) with a high molecular weight. The polymer yield increases with polymerization time, which indicates that the propagation rate is zero in order in the concentration of the monomer. The polymer yield increases also with the concentration of Cp₂YCl(THF), which indicates the yttrocene to be the real catalyst. When the polymerization temperature exceeds room temperature, the poly(methyl methacrylate) cannot be synthesized by the Cp₂YCl(THF) catalyst. When the reaction temperature reachs −60 °C, the poly(methyl methacrylate) is high syndiotatic and molecular weight by the Cp₂YCl(THF)/MAO catalyst system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1184–1194, 2000     

Thermosensitive amphiphilic polyphosphazenes and their interaction with ionic surfactants

Temperature-responding physical hydrogels are promising materials as injectable drug delivery carriers which could hold useful bioactive materials inside the polymer networks for further controlled releases. Aimed at desired qualities at body temperature, those gel characteristics need to be adjusted carefully. In this point of view, surfactant is one of the useful molecules to be used by simple formulations without harmful chemical reactions. In this study, thermothickening of amphiphilic nonionic polyphosphazene solution is modified by anionic and cationic surfactants with different alkyl chains and counter-ions. Specified in the thermothickening system, a maximum viscosity (η_max) and a temperature at that point (T_max) are changed independently reflecting unique intermolecular interactions. At low concentration (1–9 mM) of the added surfactant, the η_max is maximized at 3 mM surfactant regardless of the surfactant type while the T_max is increased continuously along with the surfactant concentration. From a kinetic point of view, this 3 mM surfactant at the maximized η_max reflects a polymer-dominating interaction and highly favorable polymer–surfactant interaction with a low selectivity in the surfactant type. However, the magnitude of the maximum viscosity (η_max) is dependent on the surfactant tail, which reflects the lifetime and the strength of the hydrophobic domains of the polymer network affected by the surfactants. Meanwhile, the magnitude of the T_max depended on the surfactant head group, which means the interfacial tension of the polymer solutions changed by the surfactants. At high concentration (10 and 30 mM) of the cationic surfactants added to the polymer solutions with two different viscosities, the cationic surfactants are supposed to interact either with the hydrophobic parts of the aggregated polymer with high viscosity or on the backbone of the less- or non-aggregated polymer with low viscosity.Ionic surfactants change the thermothickening of the amphiphilic nonionic polyphosphazene solution in a unique tail- or head-dependent way. Moreover, the concentration of the added surfactants and the association pattern of the pure polymer solutions are also crucial for the thermothickening phase behaviors. Temperature-responsive polyphosphazenes in this work exhibit unique and controllable interactions with ionic surfactants.     

Effect of Polymer on Dynamic Interfacial Tensions of Anionic–nonionic Surfactant Solutions

The dynamic interfacial tensions (IFTs) of enhanced oil recovery (EOR) surfactant/polymer systems against n-decane have been investigated using a spinning drop interfacial tensiometer in this paper. Two anionic–nonionic surfactants with different hydrophilic groups, C₈PO₆EO₃S (6-3) and C₈PO₆EO₆S (6-6), were selected as model surfactants. Partially hydrolyzed polyacrylamide (HPAM) and hydrophobically modified polyacrylamide (HMPAM) were employed. The influences of surfactant concentration, temperature, polymer concentration, and oleic acid in the oil on IFTs have been studied. The experimental results show that anionic–nonionic surfactants can form compact adsorption films and reach ultralow IFT (10^?3 mN/m) under optimum conditions. The addition of polymer has great influence on dynamic IFTs between surfactant solutions and n-decane mainly by the formation of looser mixed films resulting from the penetration of polymer chains into the interface. The compact surfactant film will also be weakened by the competitive adsorption of oleic acid, which results in the increase of IFT. Moreover, the penetration of polymer chains will be further destroyed surfactant/polymer mixed layer and lead to the obvious increase of IFT. On the other hand, polymers show little effect on the IFTs of 6-6 systems than those of 6-3 because of the hindrance of longer EO chain of 6-6 at the interface.     

Nonionic Microemulsion: Mechanism of Formation and Percolation

A series of microemulsions, both W/O and O/W, based on nonionic surfactants of the form (NP(EO)_n), were prepared using the titration method. Mixing a constant weight of surfactant with a constant volume of the dispersed phase and an initial volume of continuous phase produces an emulsion, which is titrated to clarity with another surfactant (cosurfactant). Plotting (a) the volume of cosurfactant necessary to transform an emulsion into a microemulsion containing a fixed volume of dispersed phase and constant weight of surfactant versus (b) different initial continuous-phase volumes yields a straight line. Extrapolating from experimentally determined values for the cosurfactant volume to the value corresponding to a zero-volume continuous phase allows the determination of the surfactant molar composition and the average number of ethylene oxides (EO) per nonylphenol adsorbed at the interface. Using a surfactant with the same number of ethylene oxides yields a single-surfactant microemulsion. Measurement of surfactants transmittance in the oil and water phases demonstrates that microemulsification occurs when the surfactant interfacial film is equally soluble in the two phases. Surface pressure measurements reveal that oil penetration impedes formation of O/W microemulsions with n-tetradecane or n-hexadecane as dispersed phase. Conductance, particle size, and transmittance measurements show that above a certain dispersed-phase volume percolation of the microemulsion occurs.     

Hemolytic activity of polyoxyethylene cholesteryl ethers

Hemolytic activity of nonionic surfactants, polyoxyethylene cholesteryl ethers, C₂₇H₄₅O(CH₂CH₂O) _n H (Chol-E _n ,n=, 25, 30, 50) and polyoxyethylene dihydrocholeseryl ethers, C₂₇H₄₇O(CH₂CH₂O) _n H (DHChol-E _n ,n=15, 30 50) were measured, changing the concentration of surfactant and erythrocyte at 37 °C. Maximum hemolytic activity was observed in these cholesteryl derivatives with 25–30 oxyethylene units. The time course of hemolysis was also measured as a function of the concentrations of surfactant and erythrocyte. Hemolysis started after a certain induction period,, and then apparently proceeded as a first-order reaction with respect to the erythrocyte concentration. The surfactant inducing 50% hemolysis at low concentration had a small value and large rate constant. The maximum amount of adsorption without inducing hemolysis,a ₀, decreased with increasing polyoxyethylene chain length. Chol-E₂₅ has the maximum activity for the solubilization of egg yolk lecithin at 37 °C. Based on these results, the mechanism of hemolysis by these surfactants was quantitatively discussed.     

Micelle structure and molecular self‐diffusion in isononylphenol ethoxylate–water systems

The structure and dynamic properties of micellar solutions of nonionic surfactants of a series of isononylphenol ethoxylates, C₉H₁₉C₆H₄O(C₂H₄O)_nH (where n = 6,8,9,10, and 12), were studied by NMR diffusometry, dynamic light scattering, and viscosimetry. The sizes of the micelles were determined for different surfactants and at different surfactant concentrations. The numbers of water molecules bound by a micelle and by one oxyethylene group of the surfactant were estimated. Copyright © 2013 John Wiley & Sons, Ltd.     

Aggregate formation in aqueous solutions of carboxymethylcellulose and cationic surfactants

The addition of cationic surfactants to an aqueous solution of an anionic polymer, carboxymethylcellulose (carboxyMC), causes the spontaneous formation of aggregates in a certain range of concentrations. Here we studied two surfactants, dodecyl and hexadecyl trimethylammonium bromide (DTAB and CTAB, respectively). Using different techniques (light scattering, potentiometry, viscosimetry, and zetametry), we found that a simple lengthening of the surfactant tail length by four CH2 groups drastically changes the aggregate morphology, size, and charge. We explored in detail how the surfactant and polymer concentrations act on these systems.     

Hemiesters and hemiamides of maleic and succinic acid: synthesis and application of surfactants in emulsion polymerization with styrene and butyl acrylate

Hemiesters and hemiamides of maleic acid with different chain lengths of the hydrophobic alkyl group (R = C₈H₁₇, C₁₀H₂₁, C₁₂H₂₅, C₁₆H₃₃) have been synthesized and used as surfactants in the emulsion polymerization of styrene and butyl acrylate. The same polymerization experiments were also carried out using nonreactive surfactants with an analogous succinic structure. The chemical structure of the surfactants was confirmed by 1H nuclear magnetic resonance. The melting point and critical micelle concentration of the reactive surfactants described herein were measured. All of the surfactants studied provided good stability of styrene/butyl acrylate latexes, when compared with a reference latex of a styrene/butyl acrylate copolymer prepared with a surfactant sodium dodecyl sulfate. The amount of surfactant grafted onto the particles of the final latex was estimated by conductimetric titration. Between 33 and 68% of surfactant used in emulsion polymerization was found on the surface of latex particles. Electrolyte addition at high concentration and freeze/thaw cycle cause flocculation of latexes. Copyright © 1999 John Wiley & Sons, Ltd.     

Theoretical study on the electrochemical behavior of norepinephrine at Nafion multi-walled carbon nanotubes modified pyrolytic graphite electrode

DFT-B3LYP/6-31G (d, p) and HF/6-31G (d, p) calculations are performed for deoxidized norepinephrineat (NP(R)) and its oxidized form (NP(O)). The electrochemistry of norepinephrineat (NP) was studied by cyclic voltammetry (CV) at a pyrolytic graphite electrode modified by Nafion multi-walled carbon nanotubes (MWNTs) in phosphate buffers at pH 6.0, showing that the standard electrode potential of half reaction for NP(O), H+/NP(R) is 0.75l V. This experimental standard electrode potential of half reaction is consistent with that calculated using the energies of solvation and sum of electronic and thermal free energies of NP(R) and NP(O). The frontier orbital theory and Mülliken charges of molecular explain the electrochemical behavior of CV at modified electrode well. The singlet vertical excited states for NP(R) and NP(O) are also discussed.     

Study of Complex Formation Between 18-Crown-6 and Pb2+, Tl+ and Cd2+ Cations in Binary Aqueous/Non-aqueous Solvents Using Polarographic Techniques (DPP and SWP)

The complexation of Pb²⁺, Tl⁺ and Cd²⁺ cationsby 18-crown-6 was studied in water/propanol (H₂O/PrOH),water/acetonitrile (H₂O/AN) and water/dimethylformamide(H₂O/DMF) binary systems at 20 °C using squarewave polarography (SWP) and differential pulse polarography (DPP).It was confirmed that the stoichiometry of each of the complexes formed between 18C6 and the respective cations is 1 : 1. The formation constants of the complexes were found to increase with increasing concentration of the non-aqueous solvent. In all cases, a stability order of Pb²⁺ > Tl⁺ > Cd²⁺ was observed. In general,the stabilities of individual complexes were found to decrease as the binary solvent mixture varied from H₂O/AN to H₂O/PrOH to H₂O/DMF.     

ChemInform Abstract: Anosovite‐Type V3O5: A New Binary Oxide of Vanadium.

The new anosovite‐type polymorph of the title compound is synthesized by reaction of either V₂F₆·4H₂O or a mixture of 60 wt.% VF₂·4H₂O and 40 wt.% VF₃·3H₂O with a flowing water‐saturated gaseous mixture of 15—20 vol% H₂ in argon (588 K, 14—18 h).     

Enhancement of peroxyoxalate chemiluminescence intensity by surfactants and its application to detect detergent

Enhancement of peroxyoxalate chemiluminescence (PO-CL) intensity by a surfactant in the H₂O₂/bis(2,4,6-trichlorophenyl)oxalate (TCPO)/rhodamine B system was described. The effects of 15 surfactants were evaluated by comparing the ratio of a relative CL intensity (RCI) with surfactant to that of the blank in each system. In preliminary study, H₂O₂/imidazole-HNO₃ buffer/TCPO/rhodamine B system was used to study the effects of surfactants on PO-CL intensity. Fourteen surfactants reduced the CL intensity at the 2% concentration, where their relative CL intensities ranged from 0.6 to 93.5%. Some of these phenomena may be caused by a notable change of pH that was occurred by adding the surfactant.Additionally, enhancement of PO-CL intensity was studied by using system (1) H₂O₂/TCPO/rhodamine B and (2) H₂O₂/imidazole-HNO₃ buffer/TCPO/systems. In the system 1, the favorable enhancement of CL intensity (ranged from 124 to 472%) was observed with 9 surfactants at the 0.5% concentration. This result suggested that several surfactants might play a role as a catalyst in the PO-CL reaction. There was no tendency to enhance CL intensity among the surfactant types. In the system 2, the enhancement of CL intensity was also observed by adding with 11 surfactants, which might be mainly caused by the fluorescent impurities of surfactants used.Furthermore, detection of detergent commercially available was applied by using the system 1.     

阳离子和两性表面活性剂对石英表面润湿性的影响

利用座滴法研究了阳离子表面活性剂十六烷基醚羟丙基季铵盐(C16PC)和两性离子表面活性剂十六烷基醚羟丙基羧酸甜菜碱(C16PB)溶液在石英表面上的润湿性质, 考察了表面活性剂类型及浓度对接触角的影响趋势, 讨论了黏附张力和黏附功的变化规律. 研究发现, 两种表面活性剂在高能的石英表面的吸附造成石英-水的界面自由能(γsl)增大. C16PB通过弱相互作用随机吸附到石英表面, 其增大γsl的能力与降低表面张力(γ1g)的能力相当, 接触角(θ)随浓度变化不大. C16PC 随体相浓度增大能够在石英表面通过静电作用形成定向排列的单分子层, 而后在临界胶束浓度(cmc)附近形成双层结构, 接触角随浓度变化的趋势可分为4个区域, 并通过一个极大值.     

KINETIC EFFECTS OF SURFACTANT / POLYMER MIXTURES UPON ACIDIC HYDROLYSIS OF HYDROXAMIC ACIDS

The influence of surfactant / polymer (polyethylene glycol, PEG, mol. wt. = 400) mixtures upon the acidic hydrolysis of two N-substituted hydroxamic acids, i.e., R(CO). N(OH)R' : R = C₆H₅, R' = C₆H₅;4-CH₃C₆H₄ has been studied using cationic (CTAB, TTAB and CPC) and nonionic (TX-100 and Brij-35) surfactants. An inhibitory effect was observed. The results have been explained by Porinoy - Menger model. The critical aggregation concentration and polymer saturation point of the corresponding systems have also been measured with the conductivity and surface tension methods.     

A responsive poly(N-isopropylacrylamide)/poly(ethylene glycol) diacrylate hydrogel microsphere

A responsive hydrogel microsphere, which is constituted by poly(N-isopropylacrylamide)/poly(ethylene glycol) diacrylate, was fabricated in an aqueous two-phase system based on the polymer–polymer immiscibility. Characteristics of the hydrogel microsphere, such as the particle size and the morphology of freeze-dried or hydrated natural microspheres in water, tetrahydrofuran (THF)/H₂O (1:1 in volume) or acetone/H₂O (1:1 in volume), were investigated. The results showed that the swelling ratio and the particle size of the hydrogel microspheres were highly dependent on solvent composition. In addition, these characteristics were dramatically reduced when THF or acetone was added into the aqueous media. Scanning electron microscopy and environmental scanning electron microscopy micrographs also visually demonstrated that the regular spherical shape of the microspheres in water turned to irregular in shape when the microspheres were immersed in THF/H₂O or acetone/H₂O mixtures instead of pure water.     

Magnetically loaded poly(methyl methacrylate-co-acrylic acid) nano particles

Magnetically loaded polymeric nano-particles carrying functional groups on their surface were prepared by a two-stage process. In the first stage, super-paramagnetic magnetite (Fe₃O₄) nano-particles were produced by a co-precipitation method from the aqueous solutions of FeCl₂·4H₂O and FeCl₃·6H₂O using a NaOH solution. The smallest size obtained was 40.9 nm with poly-dispersity index of 0.194 obtained by using a Zeta Sizer. The effects of Fe²⁺/Fe³⁺ molar ratio, stirring rate, temperature, base concentration, and pH on the particle size/size distribution and stability of the dispersions were examined. Increasing the relative concentration of Fe²⁺ ion and decreasing the stirring rate and pH increased the particle size, while the concentration of NaOH and temperature did not change the particle size significantly. Polymer coating was achieved by emulsion polymerization at high surfactant to monomer ratio of methyl methacrylate (MMA) and acrylic acid which were used as comonomers (comonomer ratio: 90/10 weight) with high surfactant to monomer ratio. The surfactant and initiator were SDS and KPS, respectively. Nano-particles in the range of 115 and 300 nm in diameter were produced depending on recipe. Increasing the Fe₃O₄/monomer and surfactant/monomer ratios, the KPS concentration caused a decrease in the average diameter. Magnetic properties of the nano-particles were obtained by electron spin resonance and vibrating-sample magnetometer. Most of the polymer-coated nano-particles exhibited super paramagnetic behavior.An erratum to this article can be found at     

Reaction of a naphthalene complex C10H8Yb(THF)2 with cyclopentadienyl-substituted alcohols and amines as a convenient synthetic route to the half-sandwich complexes of divalent ytterbium

The reactions of ytterbium naphthalene complex C₁₀H₈Yb(THF)₂ with 2-cyclopentadienylethanol, 1-cyclopentadienylpropan-2-ol, 3-cyclopentadienyl-1-butoxypropan-2-ol, and cyclopentadienyldimethylsilyl-tert-butylamine were studied. The bivalent ytterbium complexes with chelate bifunctional cyclopentadienyl ligands [(η⁵−C₅H₅)CH₂CH₂(η¹−O)]Yb(THF), [(η⁵−C₅H₅)CH₂CH₂(η¹−O)]Yb(DME). [(η⁵−C₅H₅)CH₂CH(Me)(η¹−O)]Yb(THF), [(η⁵−C₅H₅)CH₂CH(CH₂OC₄H₉)(η¹−O)]Yb(THF), and [(η⁵−C₅H₅)SiMe₂(η¹−N(Bu¹))]Yb(THF) were obtained and characterized. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 742–745, April, 2000.