超级电容电池

本文比较了超级电容器、锂离子电池和超级电容电池的结构、原理、研究现状和发展前景。超级电容电池的正极具有超级电容器电极的结构和双电层储能机制,负极具有类似锂离子电池负极的结构和快速电化学储能机制。超级电容器和锂离子电池的发展空间都很有限,而作为两者结合的产物的超级电容电池可兼具高比功率、高比能量、高放电电压和长循环寿命的优点,是未来储能电池的发展方向之一,但还面临缺乏具有高分解电压的电解液和高充电电压下电解液中离子枯竭的问题。     

燃料电池

燃料电池的实验能直观地说明燃料不仅能通过燃烧把化学能转变为热能,而且能在一定条件下直接转变为电能。本实验原来需要用经过高度分散的铂浸过的石墨作电极,现改用淬火的方法使石墨电极活化。     

Click-Chemistry-Mediated Cell Membrane Glycopolymer Engineering to Potentiate Dendritic Cell Vaccines

Dendritic cell vaccine (DCV) holds great potential in tumor immunotherapy owing to its potent ability in eliciting tumor-specific immune responses. Aiming at engineering enhanced DCV, we report the first effort to construct a glycopolymer-engineered DC vaccine (G-DCV) via metabolicglycoengineering and copper-free click-chemistry. Model G-DCV was prepared by firstly delivering tumor antigens, ovalbumin (OVA) into dendritic cells (DC) with fluoroalkane-grafted polyethyleneimines, followed by conjugating glycopolymers with a terminal group of dibenzocyclooctyne (DBCO) onto dendritic cells. Compared to unmodified DCV, our G-DCV could induce stronger T cell activation due to the enhanced adhesion between DCs and T cells. Notably, such G-DCV could more effectively inhibit the growth of the mouse B16-OVA (expressing OVA antigen) tumor model after adoptive transfer. Moreover, by combination with an immune checkpoint inhibitor, G-DCV showed further increased anti-tumor effects in treating different tumor models. Thus, our work provides a novel strategy to enhance the therapeutic effectiveness of DC vaccines.     

宽光谱太阳能电池

太阳能电池的光谱响应特性和光电转换效率与光伏材料的微观能带结构及其宏观组装方式密切相关。无论使用哪种光伏材料,普通单结或单层太阳能电池都只能对部分波段的太阳光进行有效利用。宽光谱研究的目标是要使太阳能电池更好地利用太阳光谱所覆盖的全部波段范围的能量,从而提高太阳能电池光电转换效率。本文从化学角度综述了实现宽光谱太阳能电池的基本方法和当前的研究进展,其中包括叠层太阳能电池、中间带太阳能电池、量子点太阳能电池、热光伏太阳能电池、上转换和下转换、分子基柔性太阳能电池等方法。     

Cell proteomic footprint

The authentication of mammalian cell cultures and their subpopulations is of great demand in biotechnology and cell therapy. However, current techniques are either not efficient or can be very complex and expensive. Here we report a simple and straightforward approach for authentication of biological cells and their subpopulations with high speed, high throughput, low sample cost, and high sensitivity. We discovered that cell cultures treated with protease under soft, ‘non‐killing’ conditions release fragments of cell surface proteins, whose composition is a strong characteristic of the cells. Mass spectrometric analysis of the released fragments allows a direct comparison of the produced mass spectrum with the mass spectrum of known cells. As an example, we applied this technique to verify subpopulations of human fibroblasts with different origins and which exhibit different medical characteristics. Copyright © 2009 John Wiley & Sons, Ltd.     

微流控芯片细胞操纵及单细胞荧光检测

微流控芯片系统用于细胞分析是该技术近期发展的一个热点^[1,2],受到越来越多的关注,其主要原因在于微全分析系统具备高度微型化、集成化和设计灵活等特点,通过巧妙设计和准确加工能够实现细胞的培养、凋亡及检测等功能^[3].     

In Situ Single‐Cell Western Blot on Adherent Cell Culture

Integrating 2D culture of adherent mammalian cells with single‐cell western blotting (in situ scWB) uses microfluidic design to eliminate the requirement for trypsin release of cells to suspension, prior to single‐cell isolation and protein analysis. To assay HeLa cells from an attached starting state, we culture adherent cells in fibronectin‐functionalized microwells formed in a thin layer of polyacrylamide gel. To integrate the culture, lysis, and assay workflow, we introduce a one‐step copolymerization process that creates protein‐decorated microwells. After single‐cell culture, we lyse each cell in the microwell and perform western blotting on each resultant lysate. We observe cell spreading after overnight microwell‐based culture. scWB reports increased phosphorylation of MAP kinases (ERK1/2, p38) under hypertonic conditions. We validate the in situ scWB with slab‐gel western blot, while revealing cell‐to‐cell heterogeneity in stress responses.     

基于SOI基底的高通量细胞电融合芯片

提出了一种以MEMS技术为基础, 可在低电压驱动条件下工作的创新型细胞电融合芯片. 该芯片的设计原理在于通过缩短微电极间的间距, 在低电压条件下获得足够强度的排队和融合电场强度. 原型芯片以SOI硅片为加工材料, 通过刻蚀方式在顶层低阻硅形成微电极和微通道; 在微电极上沉淀2 μm厚的铝膜以降低电阻率, 提高导电性; 通过PECVD方法形成150 nm厚SiO2保障铝膜的抗腐蚀性及芯片生物相容性; 芯片最终采用DIP法进行封装. 在该芯片上进行了低电压(传统电融合设备工作电压的1/20)驱动条件下的基于介电电泳的细胞排队实验及后期的细胞电融合实验, 结果表明, 细胞多以两两结合的方式排列, 与传统的细胞融合电仪器相比较, 降低了多细胞排队概率, 进而减少了传统电融合设备多细胞融合的概率, 为细胞高效率融合奠定了基础. 在加载的低电压短脉冲信号后, 微通道中形成了高压短脉冲电场, 在脉冲作用下, 烟草原生质体细胞在微通道中发生了融合, 融合时间(2 min)远低于传统电融合方法(10~30 min), 融合率远远高于传统的PEG方法(融合率小于1%)和传统电融合方法(利用BTX ECM 2001细胞电融合系统得到, 融合率小于5%).     

直接硼氢化物燃料电池

直接硼氢化物燃料电池是一种新型的燃料电池，具有理论比能量高，产物清洁无污染，燃料易于储存和运输等特点，可广泛应用于小型便携式电子产品和移动电源,近年来受到越来越多研究者的关注。本文在介绍了直接硼氢化物燃料电池工作原理的基础上讨论了阳极催化剂、阴极催化剂的研究进展，并探讨了电解液和温度等条件对电池性能的影响，简要分析了发展直接硼氢化物燃料电池面临的主要问题。     

Cell encapsulating droplet vitrification

The capability to encapsulate single cells in droplets while retaining high cell viability (>90%) has great impact on tissue engineering, high-throughput screening, as well as clinical diagnostics and therapeutics. We demonstrate a novel method to vitrify a small number of cells using cell-encapsulating droplets. The method allows vitrification at low cryoprotectant concentration (1.5 M propanediol and 0.5 M trehalose), similar to that used in slow freezing protocols. The method was successfully applied to five different mammalian cell types: AML-12 hepatocytes, NIH-3T3 fibroblasts, HL-1 cardiomyocytes, mouse embryonic stem cells, and RAJI cells.     

聚合物发光电化学池

聚合物发光电化学池(polymer light-emitting electrochemical cell,PLEC)作为一种新型的聚合物发光二极管(polymer light-emitting diodes,PLED),它的本质特征是在PLED活性层掺杂电解质以提高活性层载流子传输能力,由于其具有对电极金属功函数不敏感和量子效率高等诸多优点而受到广泛关注。本文从活性层配方的改良、电极金属及基板的表面处理、相容性的改善、固定p-n结的实现和引入热处理手段等方面综述了近几年PLEC的研究进展,分析了当前PLEC在电致发光领域面临的问题,并对PLEC的前景进行了展望。     

The Mode of Cell Death Induced by Photodynamic Treatment Depends on Cell Density

Madison Darby canine kidney II (MDCK II) cells were seeded out at two different densities and incubated with 125 micrograms/mL of the photosensitizer meso-tetra(4-sulfonatophenyl)porphine (TPPS4) for 18 h, washed and irradiated with blue light. Four hours later the cells were studied by fluorescence microscopy. Apoptotic cells were detected by virtue of the distinct condensation and fragmentation of chromatin, and necrotic cells were detected by uptake of propidium iodide. In addition apoptosis was measured by the TdT assay. The fraction of apoptotic cells and the fraction of necrotic cells were determined for both cell densities at various levels of survival. With < 55% total cell death the apoptotic fraction was significantly higher for cells in confluent monolayers than for cells growing in microcolonies at equitoxic doses. Confluent cells were 2.9 times more sensitive than cells in microcolonies partly due to a 1.5 times higher uptake of TPPS4 in monolayer cells. The difference in mode of cell death for the different cell densities was not related to any observable difference in subcellular localization pattern of TPPS4 at equitoxic doses of photodynamic treatment.     

细胞表面壳化的研究进展

细胞表面壳化主要是通过物理、化学等技术方法对细胞表面进行修饰,形成完整均匀的有机、无机、金属纳米粒子或者复合壳层结构,从而使不能自身壳化的生物细胞表面形成保护壳甚至赋予细胞新的功能,使细胞具备多功能性。近年来,此技术在细胞存储、细胞运输、细胞传感器、细胞芯片以及细胞治疗等方面应用广泛,发展迅速。本文综合目前的研究现状,详细介绍了可进行细胞表面壳化的细胞类型、生物表面壳化的方法以及人造细胞外壳的工程技术在生物医学以及能源环境中的应用等。     

全固态有机太阳能电池

从全固态有机太阳能电池的历史发展情况和研究现状出发,对现阶段全固态有机太阳能电池的结构和性能作了介绍和评估,并从材料等方面分析了它们的优势和不足之处,讨论了全固态有机太阳能电池研究的未来发展。     

Morphometric Cell Classification for Single‐Cell MALDI‐Mass Spectrometry Imaging

The large‐scale and label‐free molecular characterization of single cells in their natural tissue habitat remains a major challenge in molecular biology. We present a method that integrates morphometric image analysis to delineate and classify individual cells with their single‐cell‐specific molecular profiles. This approach provides a new means to study spatial biological processes such as cancer field effects and the relationship between morphometric and molecular features.     

细胞工厂与生物炼制

生物炼制是以可再生生物质资源为原料,生产能源与化工产品的新兴工业模式。是转变经济增长模式,保障社会经济可持续发展的重大战略需求。微生物细胞工厂是生物炼制技术至关重要的核心。世界各国纷纷设立重大研究计划支持细胞工厂的研究,以期获得生物炼制技术的领先地位。本文简要概括了细胞工厂和生物炼制这一新兴工业模式,回顾了生物炼制细胞工厂的重大计划和进展,讨论了目前亟待解决的关键问题和研究对策。     

改进的Herriott型光学长程池

用凹面反射镜和平面反射镜组成结构简单、光路易调的光多次反射装置,计算了这种光学系统的稳定性条件。考虑实际入射光束的直径和发散角,给出了最大反射次数的求法。制成适用于钛宝石激光光声光谱仪的光56次通过的长程池。理论计算的反射光斑分布与实验观测一致。这个技术有利于提高光声光谱和吸收光谱的探测灵敏度。