Metalation and halogen‐metal exchange in the imidazo[1,2‐a]quinoxaline series

The n‐butyllithium and lithium 2,2,6,6‐tetramethylpiperidide metalation and the halogen‐metal exchange of imidazo[1,2‐a]quinoxaline derivatives followed by quenching with various electrophiles were studied. The reaction conditions have been optimized and various C₁ substituted imidazo[1,2‐a]quinoxalines were obtained in high yields.     

Properties and Reactions of Substituted 1,2‐Thiazetidine 1,1‐Dioxides: Functionalization and Reactions at C(4) of the β‐Sultam

The introduction of functional groups at the 4‐position of the β‐sultam ring was realized by the synthesis of mono‐ and disubstituted derivatives by reactions of N‐silylated β‐sultams with electrophiles in the presence of BuLi or LDA. As electrophiles, ketones, chlorosilanes, a β‐sultam, CO₂, chloroformiate, halogen, azodicarboxylate, phenyltriazoledione, tosyl azide, 1,3,5‐triazine, propyl nitrate, and phenyl isocyanate were used. Furthermore, a number of derivatives of these substitution products were synthesized. All products were characterized by standard spectroscopic methods, and conformations were studied, supported by calculation.     

Syntheses of symmetric and unsymmetric 2,6‐bis(phosphino)phenols

Compounds bearing the structural motif of 2,6‐bis(phosphino)phenol have been synthesized via two general methods. Double lithium‐halogen exchange occurred in low‐temperature reactions of O‐protected (by methyl‐ or tetrahydropyranyl groups) 2,6‐dibromo‐4‐methylphenol derivatives with BuLi (2 equivalents); quenching the reaction mixtures with chlorophosphines ClPR₂ (R = Ph, ⁱPr) and corresponding O‐deprotection yielded symmetrically substituted 2,6‐bis(phosphino)phenols. Sequential incorporation of  PR₂ functionalities was accomplished via single lithium‐halogen exchange (1 eq. of BuLi) of tetrahydropyranyl‐protected 2,6‐dibromo‐4‐methylphenol followed by ClPR₂ quenches, thus enabling the syntheses of unsymmetric 2,6‐bis(phosphino)phenols. Such compounds were also obtained via sequential ortho‐lithiations of tetrahydropyranyl‐protected 4‐tert‐but ylphenol, followed by ClPR₂ quenches. All of the new compounds have been characterized by spectrometric methods (¹H and ³¹P NMR, and mass spectrometry). In addition, two of the compounds, 1‐(diphenylphosphino)‐3‐(diphenylphosphoryl)‐2‐methoxy‐5‐methylbenzene ( 3a‐ox ) and 1,3‐bis(diphenylphosphino)‐2‐methoxy‐5‐methylbenzene ( 6a ) have also been characterized via single crystal X‐ray diffraction experiments. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:656–663, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20251     

Synthesis of 3‐Alkoxybenzo[c]thiophen‐1(3H)‐ones by Hydrolysis of N‐Substituted 3‐Alkoxybenzo[c]thiophen‐1(3H)‐imines Derived from 1‐Bromo‐2‐(dialkoxymethyl)benzenes and Isothiocyanates

A convenient procedure for the preparation of a new type of thiophthalides, 3‐alkoxybenzo[c]thiophen‐1(3H)‐ones 4 and 9 has been developed. Thus, 1‐(dialkoxymethyl)‐2‐lithiobenzenes, generated by Br/Li exchange between 2‐bromo‐1‐(dialkoxymethyl)benzenes 1 and 6 , and BuLi, react with isothiocyanates to afford N‐substituted 2‐(dialkoxymethyl)benzothioamides 2 and 7 , which, on treatment with a catalytic amount of TsOH?H₂O, give N‐substituted 3‐alkoxybenzo[c]thiophen‐1(3H)‐imines 3 and 8 . The latter are hydrolyzed under acidic conditions to the desired products 4 and 9 , respectively.     

A Convenient Synthesis of 2‐Sulfanylbenzoselenazole Derivatives via the Reaction of 2‐Lithiophenyl Isothiocyanates with Selenium

The title compounds have been prepared from 2‐bromophenyl isothiocyanates 1 . Thus, 2‐lithiophenyl isothiocyanates 2 , obtained from 1 and BuLi through Br/Li exchange, reacted with Se at ?78° to form lithium benzoselenazole‐2‐thiolates 3 , which, upon aqueous workup, afforded benzoselenazole‐2(3H)‐thiones 4 . The thiolates 3 were alkylated with reactive alkyl halides and acylated with carboxylic acid chlorides to give 2‐(alkylsulfanyl)benzoselenazoles 5 and S‐(benzoselenazol‐2‐yl) thiocarboxylates 6 , respectively.     

Synthesis of Polyfunctional Diorganomagnesium and Diorganozinc Reagents through In Situ Trapping Halogen–Lithium Exchange of Highly Functionalized (Hetero)aryl Halides in Continuous Flow

We report a halogen–lithium exchange performed in the presence of various metal salts (ZnCl₂, MgCl₂⋅LiCl) on a broad range of sensitive bromo‐ or iodo(hetero)arenes using BuLi or PhLi as the exchange reagent and a commercially available continuous‐flow setup. The resulting diarylmagnesium or diarylzinc species were trapped with various electrophiles, resulting in the formation of polyfunctional (hetero)arenes in high yields. This method enables the functionalization of (hetero)arenes containing highly sensitive groups such as an isothiocyanate, nitro, azide, or ester. A straightforward scale‐up was possible without further optimization.     

One‐Pot Synthesis of 4‐Substituted 3,4‐Dihydro‐3‐methoxyisocoumarins via Carboxylation of α‐Substituted 2‐Lithio‐β‐methoxystyrenes with Carbon Dioxide

A new type of isocoumarins (=1H‐isochromen‐1‐ones=1H‐2‐benzopyran‐1‐ones), 4‐substituted 3,4‐dihydro‐3‐methoxyisocoumarins 2 , can be obtained by a one‐pot process from α‐substituted 2‐bromo‐β‐methoxystyrenes 1 . Thus, lithium 2‐(1‐aryl(or methyl)‐2‐methoxyethenyl)benzoates are conveniently generated via the Br/Li exchange between 1 and BuLi, followed by the action of CO₂ on the resulting α‐substituted 2‐lithio‐β‐methoxystyrenes. Upon treating with concentrated HCl at room temperature, these lithium benzoates undergo lactonization to provide the desired 3,4‐dihydroisocoumarins 2 in relatively good yields.     

Heterobimetallische Komplexe von Lithium,Aluminium und Gold mit dem N‐[2‐N′,N′‐(Dimethylaminoethyl)‐N‐methyl‐aminoethyl]‐ferrocenyl‐Liganden (η5‐C5H5)Fe{η5‐C5H3[CH(CH3)N(CH3)CH2CH2NMe2]‐2}

Heterobimetallic Complexes of Lithium, Aluminum, and Gold with the N ‐[2‐ N ′, N ′‐(dimethylaminoethyl)‐ N ‐methyl‐aminoethyl]‐ferrocenyl Ligand (η⁵‐C₅H₅)Fe{η⁵‐C₅H₃[CH(CH₃)N(CH₃)CH₂CH₂NMe₂]‐2} N‐[2‐N′,N′‐(dimethylaminoethyl)‐N‐methyl‐aminoethyl]ferrocene FcN,NH ( 1 ) reacts with ⁿBuLi under formation of the lithium organyl (FcN,N)Li ( 2 ). At reactions of 2 with AlBr₃ and AuCl · PPh₃ the heterobimetallic organo derivatives (FcN,N)AlBr₂ ( 3 ), (FcN,N)Au · PPh₃ ( 4 ) are formed. A detailed characterization of 2 – 4 was carried out by single crystal x‐ray analyses as well as by NMR and Mößbauer spectroscopy.     

Synthesis of Phosphaformamidines and Phosphaformamidinates

A large‐scale synthetic route to a variety of phosphaformamidines and phosphaformamidinates, a type of derivative that was not accessible by the methods previously known for preparing phosphaamidines and phosphaamidinates, is reported. Thermally stable ethyl N‐arylformimidates 1 (ArN?CH(OEt), Ar=2,4,6‐(Me)₃Ph or 2,6‐(iPr)₂Ph) readily reacted with lithium dialkyl‐ and diarylphosphanides to afford the corresponding N‐aryl phosphaformamidines in 80 and 60 % yield, respectively, whereas with lithium (aryl)(silyl)phosphanide, the N‐aryl‐N‐silylphosphaformamidine (60 % yield) was obtained. Addition of primary lithium arylphosphanides to 1 followed by addition of a stoichiometric amount of nBuLi gave rise to the respective phosphaformamidinates (70–88 % yield). Methanolysis of the products afforded the N‐aryl‐N‐hydrogenophosphaformamidines (90–95 % yield). The solid‐state structure of one of the phosphaformamidinates is also presented.     

Syntheses and Structures of Trilithium Cyclotriphosphazenates Equipped with 2‐Halo‐aryl Substituents

Hexakis (2‐halo‐anilino) cyclotriphosphazenes (2‐X‐C₆H₄NH)₆P₃N₃ {X = F ( 1d ), Cl ( 1e ), Br ( 1f )} were prepared by refluxing mixtures of hexachloro cyclotriphosphazene, 2‐haloaniline and triethylamine in toluene and characterized by single crystal X‐ray diffraction. 1d , 1e and 1f were reacted with ⁿBuLi in thf. Reactions were monitored with ³¹P NMR. Addition of three equivalents of ⁿBuLi yields lithium complexes of trianionic phosphazenates [{(thf)₂Li}₃{(2‐X‐C₆H₄N)₃(2‐X‐C₆H₄NH)₃P₃N₃}] {X= F ( 2d ), Cl ( 2e ) and Br ( 2f )}. 2d , 2e and 2f were structurally characterized by X‐ray diffraction, which reveals monomeric cis‐metalated phosphazenates featuring central P₃N₃ ring systems of chair conformation. Lithium ions reside in three N(eq)‐P‐N(endo) chelation sites at one face of the P₃N₃ ring system. Li…X distances are rather long (> 3Å) indicating no Li‐X interactions.     

Intramolecular Benzyne–Phenolate [4+2] Cycloadditions

An intramolecular benzyne–phenolate [4+2] cycloaddition is reported. Benzyne precursors, having vicinal halogen‐sulfonate functionalities, linked with a phenol(ate) by various tether groups undergo efficient intramolecular [4+2] cycloaddition by treatment with either Ph₃MgLi or nBuLi for halogen–metal exchange to form various benzobarrelenes.     

Synthesis,crystal structures and anti‐inflammatory activity of four 3,5‐bis(arylidene)‐N‐benzenesulfonyl‐4‐piperidone derivatives

3,5‐Bis(arylidene)‐4‐piperidone (BAP) derivatives display good antitumour and anti‐inflammatory activities because of their double α,β‐unsaturated ketone structural characteristics. If N‐benzenesulfonyl substituents are introduced into BAPs, the configuration of the BAPs would change significantly and their anti‐inflammatory activities should improve. Four N‐benzenesulfonyl BAPs, namely (3E,5E)‐1‐(4‐methylbenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one dichloromethane monosolvate, C₂₈H₂₁F₆NO₃S·CH₂Cl₂, ( 4 ), (3E,5E)‐1‐(4‐fluorobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one, C₂₇H₁₈F₇NO₃S, ( 5 ), (3E,5E)‐1‐(4‐nitrobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one, C₂₇H₁₈F₆N₂O₅S, ( 6 ), and (3E,5E)‐1‐(4‐cyanobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one dichloromethane monosolvate, C₂₈H₁₈F₆N₂O₃S·CH₂Cl₂, ( 7 ), were prepared by Claisen–Schmidt condensation and N‐sulfonylation. They were characterized by NMR, FT–IR and HRMS (high resolution mass spectrometry). Single‐crystal structure analysis reveals that the two 4‐(trifluoromethyl)phenyl rings on both sides of the piperidone ring in ( 4 )–( 7 ) adopt an E stereochemistry of the olefinic double bonds. Molecules of both ( 4 ) and ( 6 ) are connected by hydrogen bonds into one‐dimensional chains. In ( 5 ) and ( 7 ), pairs of adjacent molecules embrace through intermolecular hydrogen bonds to form a bimolecular combination, which are further extended into a two‐dimensional sheet. The anti‐inflammatory activity data reveal that ( 4 )–( 7 ) significantly inhibit LPS‐induced interleukin (IL‐6) and tumour necrosis factor (TNF‐α) secretion. Most importantly, ( 6 ) and ( 7 ), with strong electron‐withdrawing substituents, display more potential inhibitory effects than ( 4 ) and ( 5 ).     

A novel stereoselective synthesis of (2Z)‐2‐arylsulfanylallylic alcohols by tin–lithium exchange of (E)‐α‐stannylvinyl sulfides

Tin–lithium exchange reaction of (E)‐α‐stannylvinyl sulfides 1 with n‐butyllithium gave (Z)‐α‐arylsulfanylvinyllithiums 2 , which reacted with aldehydes or ketones 3 to afford stereoselectively (2Z)‐2‐arylsulfanylallylic alcohols 4 in good to high yields. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:639–643, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20487     

Generation of Aryl(2‐lithiophenyl)methanone O‐Methyl Oximes and Their Use for the Synthesis of N‐(3‐Alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines via the Reaction with Nitriles

An efficient two‐step procedure for the preparation of a new type of 1H‐isoindoles, i.e., N‐(3‐alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines 5 , from readily available aryl(2‐bromophenyl)methanones 1 has been developed. Aryl(2‐bromophenyl)methanone O‐methyloximes 2 , derived from the corresponding ketones, were treated with BuLi in Et₂O at 0° to generate novel lithium compounds, aryl(2‐lithiophenyl)methanone O‐methyloximes 3 , which were allowed to react with nitriles to give the desired products 5 in moderate‐to‐fair yields.     

Synthesis and X‐ray Structures of the Polycyclic Dimers {[PhB(μ‐NtBu)2AsN(tBu)H]LiI}2 and [PhB(μ‐NtBu)2AsN(tBu)Li]2

The metathesis of [PhB(μ‐NtBu)₂]AsCl and tBuN(H)Li in 1:1 molar ratio in diethyl ether produced the amido derivative [PhB(μ‐NtBu)₂AsN(tBu)H] ( 1 ) in good yield. The lithiation of 1 with one equivalent of nBuLi afforded the lithium salt [PhB(μ‐NtBu)₂AsN(tBu)Li] ( 2a ). Both 1 and 2a were characterized by multinuclear NMR spectroscopy. The crystal structure of 2a is comprised of a U‐shaped, centrosymmetric dimer in which the monomeric [PhB(μ‐NtBu)₂AsN(tBu)]^?Li⁺ units are linked by Li‐N interactions to give a six‐rung ladder. Oxidation of 2a with one‐half equivalent of I₂ in diethyl ether resulted in hydrogen abstraction from the solvent to give the dimeric lithium iodide adduct {[PhB(μ‐NtBu)₂AsN(tBu)H]LiI}₂ ( 1 ·LiI) with a central Li₂I₂ ring.     

tBuLi‐Mediated One‐Pot Direct Highly Selective Cross‐Coupling of Two Distinct Aryl Bromides

A Pd‐catalyzed direct cross‐coupling of two distinct aryl bromides mediated by tBuLi is described. The use of [Pd‐PEPPSI‐IPr] or [Pd‐PEPPSI‐IPent] as catalyst allows for the efficient one‐pot synthesis of unsymmetrical biaryls at room temperature. The key for this selective cross‐coupling is the use of an ortho‐substituted bromide that undergoes lithium–halogen exchange preferentially.     

Metallations and Reactions with Electrophiles of 4‐Isopropyl‐5,5‐diphenyloxazolidin‐2‐one (DIOZ) with N‐Allyl and N‐Propargyl Substituents: Chiral Homoenolate Reagents

N‐Allyl, N‐cinnamyl, and N‐(3‐trimethylsilyl)propargyl derivatives of 4‐isopropyl‐5,5‐diphenyloxazolidin‐2‐one (DIOZ) are prepared by lithiation of the parent DIOZ (with BuLi in THF) and reaction with the corresponding bromides (Scheme 1). Lithiation in the same solvent, with deprotonation by BuLi on the allylic or propargylic CH₂ group at dry‐ice temperature, provides colorful solutions, which are either combined with aldehydes or ketones directly or after addition (with or without warming) of (Me₂N)₃TiCl or (i‐PrO)₃TiCl. Conditions have thus been elaborated under which all three types of conjugated lithium compounds react in the γ‐position with respect to the oxazolidinone N‐atom: carbamoyl derivatives of enamines and allenyl amines are formed in yields ranging from 60 to 80% and with diastereoselectivities up to 98% (Schemes 2–5). The C=C bond of the N‐hydroxyalkenyl groups has (Z)‐configuration (products 5 and 8 ), the allene chirality axis has (M)‐configuration (products 9 ), and the addition to aldehydes and unsymmetrical ketones has taken place preferentially from the Si face. A mechanistic model is proposed that is compatible with the stereochemical outcome (assuming kinetic control and disregarding the presence of Li and Ti species in the reaction mixture; cf. L, M in Fig. 4). Hydrolysis of the enamine derivatives leads to lactols, oxidizable to γ‐lactones, with recovery of the crystalline oxazolidinone, as demonstrated in three cases (Scheme 6). Thus, the application of chiral oxazolidinone auxiliaries (cf. Figs. 1 and 2) has been extended to the overall enantioselective preparation of homoaldols.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

The structures of 1,4‐diaryl‐5‐trifluoromethyl‐1H‐1,2,3‐triazoles related to J147, a drug for treating Alzheimer's disease

J147 [N‐(2,4‐dimethylphenyl)‐2,2,2‐trifluoro‐N′‐(3‐methoxybenzylidene)acetohydrazide] has recently been reported as a promising new drug for the treatment of Alzheimer's disease. The X‐ray structures of seven new 1,4‐diaryl‐5‐trifluoromethyl‐1H‐1,2,3‐triazoles, namely 1‐(3,4‐dimethylphenyl)‐4‐phenyl‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₇H₁₄F₃N₃, 1 ), 1‐(3,4‐dimethylphenyl)‐4‐(3‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₆F₃N₃O, 2 ), 1‐(3,4‐dimethylphenyl)‐4‐(4‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₆F₃N₃O, 3 ), 1‐(2,4‐dimethylphenyl)‐4‐(4‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₆F₃N₃O, 4 ), 1‐[2,4‐bis(trifluoromethyl)phenyl]‐4‐(3‐methoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₈H₁₀F₉N₃O, 5 ), 1‐(3,4‐dimethoxyphenyl)‐4‐(3,4‐dimethoxyphenyl)‐5‐trifluoromethyl‐1H‐1,2,3‐triazole (C₁₉H₁₈F₃N₃O₄, 6 ) and 3‐[4‐(3,4‐dimethoxyphenyl)‐5‐(trifluoromethyl)‐1H‐1,2,3‐triazol‐1‐yl]phenol (C₁₇H₁₄F₃N₃O₃, 7 ), have been determined and compared to that of J147 . B3LYP/6‐311++G(d,p) calculations have been performed to determine the potential surface and molecular electrostatic potential (MEP) of J147 , and to examine the correlation between hydrazone J147 and the 1,2,3‐triazoles, both bearing a CF₃ substituent. Using MEPs, it was found that the minimum‐energy conformation of 4 , which is nearly identical to its X‐ray structure, is closely related to one of the J147 seven minima.     

Sulfone–Metal Exchange and Alkylation of Sulfonylnitriles

The first general sulfone–metal exchange is described. Treating substituted 2‐pyridylsulfonylacetonitriles with either BuLi or Bu₃MgLi generates metalated nitriles that efficiently intercept a variety of electrophiles to afford quaternary nitriles. The 2‐pyridylsulfone is critical for the sulfone–metal exchange because chelation anchors the organometallic proximal to the electrophilic, tetrasubstituted sulfone to override complex‐induced deprotonation. Alkylating commercial 2‐pyridinesulfonylacetonitrile with mild bases, either K₂CO₃ or DBU, and subsequent sulfone–metal exchange and alkylation rapidly assembles quaternary nitriles by three alkylations, only one of which requires an organometallic reagent.