A new experimental method to distinguish two different mechanisms for a category of oscillators involving mass transfer

We present new experimental evidence that further confirms that a combination of electrochemical reactions and diffusion–convection (ERDC) mass transfer accounts for the potential oscillations that appear under conditions of transport limited current. A typical example is given for the reduction of Fe(CN)₆³⁻ in alkaline solution accompanying periodic hydrogen evolution. No potential oscillations occur by simply replacing the hydrogen evolution with IO₃⁻ reduction as the second current carrier. That replacement removes only the convection mass transfer induced by the hydrogen evolution, and retains the negative differential resistance (NDR) from the Frumkin repulsive effect. The key role of hydrogen evolution is thus to restore the Fe(CN)₆³⁻ surface concentration after its depleting to zero by diffusion-limited reduction, rather than purely a second current carrier. Therefore, the other mechanism, which emphasizes the NDR from the Frumkin interaction due to electrostatic repulsion, is excluded because it does not have a direct connection with the oscillations. Moreover, a crossing cycle in cyclic voltammograms is a more convincible criterion for this category of electrochemical oscillators than the negative impedance.     

硫醇在金电极上的SA单分子层膜的电化学研究

金基底上的硫醇自组装单分子层膜(Self-asembledmonolayers,SAMs)具有良好的稳定性和有序性,因此在基础研究及应用技术等领域都受到了广泛的重视^[1].通过电化学方法测定自组装膜对溶液中电活性物质的异向电子转移的阻碍作用.     

Enzyme-free impedimetric glucose sensor based on gold nanoparticles/polyaniline composite film

A non-enzymatic impedimetric glucose sensor was fabricated based on the adsorption of gold nanoparticles (GNPs) onto conductive polyaniline (PANI)-modified glassy carbon electrode (GCE). The modified electrode (GCE/PANI/GNPs) was characterized by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The determination of glucose concentration was based on the measurement of EIS with the mediation of electron transfer by ferricyanide ([Fe(CN)₆]^3?). The [Fe(CN)₆]^3? is reduced to ferrocyanide ([Fe(CN)₆]^4?), which in turn is oxidized at GCE/PANI/GNPs. An increase in the glucose concentration results in an increase in the diffusion current density of the [Fe(CN)₆]^4? oxidation, which corresponds to a decrease in the faradaic charge transfer resistance (R _ct). A wide linear concentration range from 0.3 to 10 mM with a lower detection limit of 0.1 mM for glucose was obtained. The proposed sensor shows high sensitivity, good reproducibility, and stability. In addition, the sensor exhibits no interference from common interfering substances such as ascorbic acid, acetaminophen, and uric acid.     

Asymmetrical Conductivity of TCNQ Modificd Au/Thiol-Lipid Bilayers in Fe(CN)_6~(3-/4-)solution

Duet0itssimilaritytobiomembraneinmicroenvironmentanditshighmechanicalstability,thesupportedlipidbilayerassemblyhasprovidedago0dmodelnot0nlytostudybiomembranes'-',butalsotodevelopbiomo1ecularelectronicdevices'=.Becausethealkanethi0lmonolayersongoldarecharacteristicoftheirhighstructureorder,compactnessandstability',recentinterestsinsupp0rtedbilayersf0cus0nth0secomp0sed0faselfassembledthi0lm0nolayerandaIipidm0noIayer.""-".Inthiswork,werep0rttheasymmetricalconductivityofAu/ODT-PCbilayerm0dified…     

Insights into the electro-oxidation of hydrazine at single-walled carbon-nanotube-modified edge-plane pyrolytic graphite electrodes electro-decorated with metal and metal oxide films

Electrochemistry of edge-plane pyrolytic graphite electrodes (EPPGEs) modified with Aldrich single-walled carbon nanotubes (SWCNTs) electro-decorated with metal (Ni, Fe and Co) and their oxides have been studied. The morphology and identity of the metallic dispersions were examined by scanning electron microscopy and energy-dispersive spectroscopy. We show that SWCNTs serve as efficient conducting carbon material for electronic communication between metal films and the underlying carbon electrode. By using cyclic voltammetry and electrochemical impedance spectroscopy (EIS) techniques, it is proved that both EPPGE-SWCNT-Ni and EPPGE-SWCNT-Fe exhibit comparable electrochemical response in buffered aqueous solution (pH 7.0) and towards electro-oxidation of hydrazine in Na₂SO₄ solution. The impedance spectra of these SWCNT-metal hybrids were complicated and follow electrical equivalent circuit model typical of adsorption-controlled charge transfer kinetics. Hydrazine impedance spectra exhibited inductive loop, characteristic of Faradaic current being governed by the occupation of an intermediate state. On the other hand, the EIS data obtained in a simple redox probe, [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻, showed that EPPGE-SWCNT and EPPGE-SWCNT-Ni followed electrical equivalent circuit models typical of partial charge transfer or adsorption-controlled kinetics with some resemblance to the behaviour of electrolyte–insulator–semiconductor sensors.     

Electrochemical characterization of polyelectrolyte/gold nanoparticle multilayers self-assembled on gold electrodes

Polyelectrolyte/gold nanoparticle multilayers composed of poly(l-lysine) (pLys) and mercaptosuccinic acid (MSA) stabilized gold nanoparticles (Au NPs) were built up using the electrostatic layer-by-layer self-assembly technique upon a gold electrode modified with a first layer of MSA. The assemblies were characterized using UV-vis absorption spectroscopy, cyclic and square-wave voltammetry, electrochemical impedance spectroscopy, and atomic force microscopy. Charge transport through the multilayer was studied experimentally as well as theoretically by using two different redox pairs [Fe(CN)(6)](3-/4-) and [Ru(NH(3))(6)](3+/2+). This paper reports a large sensitivity to the charge of the outermost layer for the permeability of these assemblies to the probe ions. With the former redox pair, dramatic changes in the impedance response were obtained for thin multilayers each time a new layer was deposited. In the latter case, the multilayer behaves as a conductor exhibiting a strikingly lower impedance response, the electric current being enhanced as more layers are added for Au NP terminated multilayers. These results are interpreted quite satisfactorily by means of a capillary membrane model that encompasses the wide variety of behaviors observed. It is concluded that nonlinear slow diffusion through defects (pinholes) in the multilayer is the governing mechanism for the [Fe(CN)(6)](3-/4-) species, whereas electron transfer through the Au NPs is the dominant mechanism in the case of the [Ru(NH(3))(6)](3+/2+) pair.     

Impedance Analysis of Inherently Redox‐Active Ionic‐Liquid‐Based Photoelectrochemical Cells: Charge‐Transfer Mechanism in the Presence of an Additional Redox Couple

An intensive electrochemical impedance study was carried out to understand the charge‐transfer processes in photoelectrochemical (PEC) cells based on ionic liquid (IL) electrolytes. Three different electrolytes were utilized to understand the role of redox species as well as the medium on the charge‐transfer mechanism. The negligible diffusion resistance, despite the presence of two different redox species in the case of Fe(CN)₆^?4/?3 in IL, was explained on the basis of charge transfer between species of two different redox couples. Accordingly, the redox species are not required to travel through the bulk of the electrolyte for the removal of accumulated charges, as short‐range charge transfer between the IL and the Fe(CN)₆^?4/?3 species facilitates the removal of accumulated charges. It is also shown that PEC cells utilizing dual redox couples are highly stable with larger photoelectrochmeical windows, >3 V.     

A study of electrode kinetics by global analysis of a single electrochemical experiment

An efficient method is presented for analyzing electrochemical processes controlled by diffusion and by the kinetics of heterogeneous electron-transfer. The method is based on a three-dimensional concept and has the advantage of utilizing all the data available from a voltammetric experiment. The three-dimensional method provides a useful diagnosis of whether Butler-Volmer kinetics is appropriate and, if so, for calculating the standard heterogeneous charge transfer rate constant, reversible halfwave potential, diffusion coefficient and charge transfer coefficient. Experiments on the [Cr(CN)₆]^3?+e^?[Cr(CN)₆]^4? reaction using cyclic voltammetry are reported and the parameters so determined are shown to agree with literature values.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

Copper hexacyanoferrate multilayer films on glassy carbon electrode modified with 4-aminobenzoic acid in aqueous solution

4-Aminobenzoic acid (4-ABA) was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation during the electrooxidation process in 0.1 M KCl aqueous solution. X-ray photoelectron spectroscopy (XPS) measurement proves the presence of 4-carboxylphenylamine on the GCE. Electron transfer processes of Fe(CN)₆³⁻ in solutions of various pHs at the modified electrode are studied by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Changing the solution pH would result in the variation of the terminal group's charge state, based on which the surface pK_a values were estimated. The copper hexacyanoferrate (CuHCF) multilayer films were formed on 4-ABA/GCE prepared in aqueous solution, and which exhibit good electrochemical behavior with high stability.     

膜电阻对自组装膜修饰电极电化学行为的影响

应用循环伏安和交流阻抗技术研究了 16烷基硫醇自组装膜修饰的金电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的电化学行为 .无“针孔”缺陷的自组装膜对溶液与基底间的界面电子转移具有强烈的阻碍作用 ,当过电位较大时 ,In(I/ η)对 η1/2 之间具有良好的线性关系 .通过对Au/SAM /Hg模拟体系的电流———电压曲线进行测定 ,得到了自组装膜膜电阻的特征 .指出由于膜电阻的存在 ,自组装膜修饰电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的行为实质上反映了膜自身的电阻特征     

Investigations on the kinetics of electron transfer reactions in magnetic fields

There is a controversial debate if a magnetic field can influence the rate of electron transfer (ET) reactions. In this paper, we report kinetic measurements of the ET rate constants for the redox couples [IrCl6]2-/[IrCl6]3-, [Fe(CN)6]3-/[Fe(CN)6]4-, and [Fe(H2O)6]3+/[Fe(H2O)6]2+ in magnetic fields up to 1 T. To reduce effects arising from magnetically induced mass transport (magnetohydrodynamic effect), disk microelectrodes with a diameter of 50 microm were used in potentiodynamic (cyclic and linear sweep voltammetry) and in electrochemical impedance spectroscopy experiments. None of the investigated redox couples showed a magnetic field effect on the ET rate constant.     

The Kinetics of Indium Electroreduction from Chloride Solutions

The electroreduction of indium on indium electrode (99.98%) in perchlorate-containing chloride electrolytes is studied by the methods of linear sweep and cyclic voltammetry, impedance spectroscopy, and chronoamperometry. The indium electroreduction is limited by diffusion, the reaction rate constant is 1.3 10^–4 cm/s at the indium salt concentration of 0.1 M. The values of the apparent rate constant for the charge transfer stage found by linear sweep and cyclic voltammetry and also by impedance spectroscopy are 2.37 × 10^–3, 3.62 × 10^–3, 3.06 × 10^–3 cm/s, respectively. The values of diffusion coefficient of indium(III) ions calculated according to the Cottrell equation based on chronoamperametric measurements and from the Warburg impedance found by impedance spectroscopy are in good agreement. The presence of the Gerischer impedance is stated, which suggests that a homogeneous reaction of formation of indium chloride complexes proceeds and its mechanism is chemical-electrochemical.

     

A novel nitrite sensor based on graphene/polypyrrole/chitosan nanocomposite modified glassy carbon electrode

A novel nitrite sensor was fabricated based on a graphene/polypyrrole/chitosan nanocomposite film modified glassy carbon electrode. The nanocomposite film was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. The electron transfer behaviour of the modified electrodes was investigated in [Fe(CN)(6)](3-)/(4-) redox probe using cyclic voltammetry and electrochemical impedance spectroscopy. Differential pulse voltammetry and amperometry were used to study the electrochemical properties of the proposed sensor. Under optimum conditions, the sensor exhibited good reproducibility and stability for nitrite determination. Linear response was obtained in the range of 0.5-722 μM with a detection limit of 0.1 μM (S/N = 3) for nitrite determination.     

阳极底物对微生物燃料电池处理秸秆水解物性能的影响

以双室微生物燃料电池为反应器,铁氰化钾为阴极液,研究污水处理厂活性污泥菌液和玉米秸秆水解液对MFC的产电性能的影响。结果表明,随着阳极中活性污泥菌液体积（1.5、3.0、4.5、6.0 mL）增加,MFC的产电量逐渐增加,当活性污泥的体积增加至7.5 mL时,产电量开始呈下降趋势;玉米秸秆水解液在底物中的浓度为0、10、15、20、30、40 g/L时,电池的稳定电压分别为54、157、248、208、170、146 mV。当阳极活性污泥菌液体积为6 mL、玉米秸秆水解液浓度为15 g/L时,微生物燃料电池的产电性能最佳,此时MFC的功率密度为54.6 mW/m²,内阻为496 Ω。同时,循环伏安曲线（C-V）和交流阻抗曲线（EIS）测试可知,MFC的电极过程由电荷传递和扩散过程共同控制,反应过程受电子传递控制。     

Assessing the Apparent Effective Thickness of the Supported Hybrid Bilayer Membranes Consisting of Octadecanethiol and Phospholipid by ac Impedance Spectroscopy

The electrochemical behavior of the gold electrode modified by hybrid bilayer membranes in different concentrations of Fe(CN)₆^3?/Fe(CN)₆^4? was investigated by electrochemical impedance spectroscopy and cyclic voltammetry technology. The electron transfer between gold and the redox species separated by the hybrid bilayers assembly was completed by an electron tunneling process. A detailed equivalent circuit for electron transport across the HBMs is proposed. It was found that the apparent effective thickness of the hybrid bilayer membranes was lower than that of the sum of the chain length of octadecanethiol and phospholipid so some possible collapsed sites might exist at the hybrid bilayer membranes.     

A novel bacterial cellulose-based carbon paste electrode and its polyoxometalate-modified properties

A novel bacterial cellulose nanofiber-based carbon paste electrode (BCPE) was fabricated. It was characterized by scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectroscopy. Compared with traditional carbon paste electrode, BCPE exhibited better electrochemical reversibility with the enhancement of the redox currents and decrease of peak potential separation as well as lower charge transfer resistance in Fe(CN)₆^3?/4? redox system. Keggin-type sodium phosphopolyoxomolybdate, PMo₁₂, was successfully assembled on BCPE via cyclic voltametric scan, and the obtained PMo₁₂/BCPE possessed not only a good electrochemical behavior but also an excellent electrocatalytic activity toward the reduction of nitrite. Because of its nano-dimension, lower cost and prominent electrochemical properties, bacterial cellulose-based carbonaceous materials would be a candidate of graphite for the preparation of novel carbon paste electrode.     

Electrophoretic deposited MWCNT composite graphite pencils and its uses to determine hyperin

A simple, fast, and effective method of fabricating electrochemical sensors using composite pencil graphite (CPG) lead modified with carboxylic multiwalled carbon nanotube (c-MWCNT) via electrophoretic deposition (EPD) has been developed. The EPD of c-MWCNT film on the CPG electrode (CPGE) was carried out at a constant applied potential of 25?V and deposition time of 1?min. The electrochemical performances of the modified CPGE, i.e., c-MWCNT/CPGE, in Fe(CN) ₆ ^4?/3? has been studied by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The c-MWCNT/CPGE has better current density, onset potentials, and charge transfer resistances than the CPGE. The c-MWCNT/CPGE has been successfully used to analyze hyperin in dry fruits of Acanthopanax sessiliflorus.     

Au/硫醇/卵磷脂双层膜的制备及其电化学表征

生命体系的许多过程发生在生物膜上,生物膜模拟体系的制备与研究一直受到人们的重视．自组装单分子膜（ＳｅｌｆＡｓｅｍｂｌｅｄＭｏｎｏｌａｙｅｒｓ,ＳＡＭｓ）特别是在金基底表面的硫醇单分子膜由于其具有良好的稳定性及有序性,因此在基础理论研究及应用技术等方...     

Electrochemical and thermodynamic properties of hexacyanoferrate(II)/(III) redox system on multi-walled carbon nanotubes

Novel films consist of multi-walled carbon nanotubes (MWCNT) were fabricated by means of catalytic chemical vapor deposition (CVD) technique with decomposition of either acetonitrile (ACN) or benzene (BZ) using ferrocene (FeCp₂) as catalyst. The electrochemical and thermodynamic behavior of the ferrocyanide/ferricyanide, [Fe(CN)₆]^3−/4− redox couple on synthesized MWCNT-based films was investigated by means of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques at T = (278.15, 283.15, 293.15, and 303.15) K. The redox couple [Fe(CN)₆]^3−/4− behaves quasi-reversibly on fabricated MWCNT-based films and its reversibility is enhanced upon increasing temperature. Namely, the findings establish that with the rise in temperature the barrier for interfacial electron transfer decreases, leading, consequently, to an enhancement of the kinetics of the charge transfer process. According to thermodynamics the equilibrium of the redox process is shifted towards the formation of [Fe(CN)₆]³⁻ at elevated temperatures.