Kinetic study on the synthesis of some benzo[g]quinoxalin-2(1H)-one derivatives

Some novel 3-substituted benzoquinoxalinones [R = H, CH₃, C₆H₅, (CH₂)₂COOH] were synthesized by the Hinsberg reaction between 2,3-diaminonaphthalene and several α-dicarbonyl compounds. The course of the reactions was followed by the second uv/visible Derivative Spectroscopy Method at different pH values (-0.89 to 9.0) and also in organic solvents at 25°. The compound non-substituted at C-3 was the only one that could be obtained in every media in good yields (80%), having pseudo first-order anelation rate constants of relative high values (1 × 10^?1 — 1 × 10^?2 min^?1). On the other hand, only methanol could be used as the organic solvent for the synthesis of all of the other compounds; aqueous media always provided better results. In the 3-methyl derivative, as well as in the 3-phenyl derivative the change of the reaction pH medium modified the stoichiometry of the anelation, turning a non-quantitative reaction into a quantitative one. This is explained by a change in the mechanism of the reaction on going to lower hydrogen concentrations, a fact that was supported by complementary quantitative hptlc experiments. In general, pseudo first-order rate constants for the anelation were one or two logarithmic units lower than those of the non-substituted compound (R_C-3 = H), but yields were above 60% in every case. A reaction scheme is presented which includes a probable mechanism.     

Reaction Kinetics of Carbon Dioxide (CO2) Absorption in Sodium Salts of Taurine and Proline Using a Stopped‐Flow Technique

The pseudo–first‐order reaction rate constants (k₀, s^?1) for the reaction of carbon dioxide in aqueous solutions of sodium taurate (NaTau) and sodium prolinate (NaPr) were measured using a stopped‐flow technique at a temperature range of 298–313 K. The solutions concentration varied from 5 to 50 mol m^?3 and from 4 to 12 mol m^?3 for NaTau and NaPr, respectively. Comparing the k₀ values, aqueous NaPr was found to react very fast with CO₂ as compared with the industrial standard aqueous monoethanolamine (MEA) and aqueous sodium taurate (NaTau) was found to react slower than aqueous MEA at the concentration range considered in this work. For the studied amino acid salts, the order of the reactions was found to be unity with respect to the amino acid salt concentration. Proposed reaction mechanisms such as termolecular and zwitterion reaction mechanisms for the reaction of CO₂ with aqueous solutions were used for calculating the second‐order reaction rate constants (k₂, m³ mol^?1 s^?1). The formation of zwitterion during the reaction with CO₂ was found to be the rate‐determining step, and the deprotonation of zwitterion was instantaneous compared to the reverse reaction of zwitterion to form an amino acid salt. The contribution of water was established to be significant for the deprotonation of zwitterion. Comparing the pseudo–first‐order reaction rate constants (k₀, s^?1) of various amino acid salts with CO₂, NaPr was found to be the faster reacting amino acid salt. The activation energy for NaTau was found to be 48.1 kJ mol^?1 and that of the NaPr was found to be 12 kJ mol^?1. The Arrhenius expressions for the reaction between CO₂ and the studied amino acid salts are      

Kinetic Study of the Bromine-Catalyzed Isomerization of Maleic Acid in Aqueous Ce(IV)-Br−-H2SO4 Medium

The presence of ceric and bromide ions catalyzes the isomerization of maleic acid (MA) to fumaric acid (FA) in aqueous sulfuric acid. A kinetic study of this bromine-catalyzed reaction was carried out. The reaction between ceric ion and maleic acid is first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [H₂SO₄]₀=1.2 M, μ=2.0 M (adjusted by NaClO₄), and [MA]₀=(0.5–1.0)M, the observed pseudo-first-order rate constant (k₀₃) at 25° is k₀₃=7.622×10^?5 [MA]₀/(1+0.205[MA]₀). The reaction between ceric and bromide ions is first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [Br^?]₀=(0.025–0.150)M, the pseudo-first-order rate constant (k₀₂) at 25° is k₀₂= (4.313±0.095)x10^?2[Br^?]²+(2.060±0.119)x10^?3[Br^?]. The reaction of Ce(IV) with maleic acid and bromide ion is also first order with respect to Ce(IV). For [Ce(IV)]₀=5.0×10^?4 M, [MA]₀=0.75 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [Br^?]₀= (0.025–0.150)M, the pseudo-first-order rate constant (k₀₃) at 25° is k₀₃= (5.286±0.045)x10^?2[Br^?]²+(3.568±0.056)x10^?3[Br^?]. For [Ce(IV)]₀=5.0 × 10^?4 M, [Br^?]₀=0.050 M, [H₂SO₄]₀=1.2 M, μ=2.0 M, and [MA]₀=(0.15–1.0)M at 25°, k₀₃=(2.108×10^?4+2.127×10^?4[MA]₀)/(1+0.205[MA]₀). A mechanism is proposed to rationalize the results. The effect of temperature on the reaction rate was also studied. The energy barrier of Ce(IV)—Br^? reaction is much less than that of Ce(IV)—MA reaction. Maleic and fumaric acids have very different mass spectra. The mass spectrum of fumaric acid exhibits a strong metastable peak at m/e 66.5.     

Kinetic and mechanistic studies of oxidation of alanine and phenylalanine by sodium N-chlorobenzene sulfonamide (chloramine-B) in hydrochloric acid medium

The kinetics of oxidation of alanine and phenylalanine by sodium N-chlorobenzene sulfonamide (CAB) has been investigated at 30°C in two ranges of acid concentrations. The reactions follow identical kinetics for both amino acids. At low acid concentration (0.03–0.10M), simultaneous catalysis by H⁺ and Cl^? ions is noted. The rate shows a first-order dependence on [CAB], but is independent of [substrate]. A variation of the ionic strength or the dielectric constant of the medium or the presence of the added reaction product benzene sulfonamide (BSA) has no pronounced effect on the rate. At [HCl] > 0.2M, the rate is independent of [H⁺], but shows a first-order dependence on [CAB] and a fractional-order dependence on [amino acid]. The addition of BSA or Cl^? ions, or a change in the ionic strength of the medium has no influence on the rate. Upon decreasing the dielectric constant of the medium, the rate increased, indicating positive ion–dipole interaction in the rate-determining step. The reaction was studied at different temperatures, and activation parameters have been computed. Rate laws in agreement with experimental results have been derived. Suitable mechanisms to account for the observed kinetics are proposed. The rate constants obtained from the derived rate laws as [H⁺], [Cl^?], and [substrate] vary are in excellent agreement with the observed rate constants, thus justifying the proposed rate laws and hence the suggested mechanistic schemes.     

Kinetics of oxidation of heterocyclic secondary alcohols by N-chloro-r-2,c-6-diphenyl-t-3 methyl piperidin-4-one (NCP) in perchloric acid medium

An investigation of the kinetics of oxidation of epimeric piperidin-4-ols, oxan-4-ols, and cyclohexanol by N-chloro-r -2, c -6-diphenyl-t -3-methylpiperidin-4-one (NCP) in aqueous acetic acid in the presence of perchloric acid shows that the reaction is first-order each in substrate and oxidant. Both H₃O⁺ and Cl^? which catalyze the reaction, exhibit a fractional order kinetics. While increase in ionic strength increases the rate slightly, an inverse dependence is observed between rate and solvent polarity. Addition of r -2-c -6-diphenyl-t -3-methylpiperidin-4-one, one of the reaction products, did not influence the rate. Also, no kinetic isotope effect has been observed. A plausible mechanism consistent with these observations is proposed and the relative reactivities of the substrates are explained on conformational grounds. © 1994 John Wiley & Sons, Inc.     

Study of mechanistic features of tetrahedral-octahedral interconversion of tetracyanozincate (II) to bis(4-(2hyphen;Pyridylazo)hyphen;resorcinol)zincate(II) by stopped-flow technique

The present study examines the kinetics and mechanism of the formation of [Zn(CN)₄]^2? from ZnR₂^2? (R represents 4-(2-Pyridylazo)resorcinol, short named as Par) and vice versa. The reactions have been followed at 494 nm (λ_max of [Zn(Par)₂]^2?, ε = 7.8 × 10⁴ M^?1 cm^?1) using stopped-flow spectrophotometer in presence of excess of incoming ligand. The data show that the formation of [Zn(CN)₄]^2? complex is first order in [ZnR₂^2?] and the order with respect to [CN^?] varies from one at higher cyanide concentration to zero at low [CN^?]. These observations suggest a slow dissociation of [ZnR₂]^2? to ZnR and R^2? and a cyanide assisted rapid dissociation of [ZnR₂]^2? to [ZnR(CN)_x]^x? followed by their rapid conversion to [Zn(CN)₄]^2?. The reaction of Zn(Par) with cyanide ions also follow first order kinetics at higher as well as lower cyanide concentrations. The reverse reaction exhibits first order dependence each in [Zn(CN)₄^2?] and [Par^2?], but an inverse first order dependence in [CN^?] at low Par concentrations. However, at higher Par concentration the reaction rate tends to be independent of [Par^2?]. On the basis of forward and reverse rate studies, a five step mechanism consistent with these results has been proposed. The activation parameters and the effect of ionic strength have been used in further support to the proposed mechanism. The effect of pH on the rates of forward and reverse reaction has also been investigated.     

Crystallographic characterization of three cathinone hydrochlorides new on the NPS market: 1-(4-methylphenyl)-2-(pyrrolidin-1-yl)hexan-1-one (4-MPHP), 4-methyl-1-phenyl-2-(pyrrolidin-1-yl)pentan-1-one (α-PiHP) and 2-(methylamino)-1-(4-methylphenyl)pentan-1-one (4-MPD)

Cathinones belong to a group of compounds of great interest in the new psychoactive substances (NPS) market. Constant changes to the chemical structure made by the producers of these compounds require a quick reaction from analytical laboratories in ascertaining their characteristics. In this article, three cathinone derivatives were characterized by X-ray crystallography. The investigated compounds were confirmed as: 1-[1-(4-methylphenyl)-1-oxohexan-2-yl]pyrrolidin-1-ium chloride ( 1 , C₁₇H₂₆NO⁺·Cl^?, the hydrochloride of 4-MPHP), 1-(4-methyl-1-oxo-1-phenylpentan-2-yl)pyrrolidin-1-ium chloride ( 2 ; C₁₆H₂₄NO⁺·Cl^?, the hydrochloride of α-PiHP) and methyl[1-(4-methylphenyl)-1-oxopentan-2-yl]azanium chloride ( 3 ; C₁₃H₂₀NO⁺·Cl^?, the hydrochloride of 4-MPD). All the salts crystallize in a monoclinic space group: 1 and 2 in P2₁/c, and 3 in P2₁/n. To the best of our knowledge, this study provides the first detailed and comprehensive crystallographic data on salts 1 – 3 .     

Kinetics and mechanism of the oxidation of a heterocyclic thioamide by silver(II)-cyclam

The kinetics of the oxidation of 4,6-dimethyl-2-mercaptopyrimidine (DMP) by Ag(cyclam)²⁺ were studied in buffer solutions from pH 5.8 to 7.2 at constant ionic strength of 0.10?M?(NaClO₄). The reaction is observed to be first-order with respect to [Ag(cyclam)²⁺] and to [DMP]. However, the reaction rate is affected by the pH of the solution owing to the acid–base equilibrium of the thiol. The mechanism postulated to account for the kinetics includes an acid–base equilibrium and oxidation of thiol (RSH) and thiolate ion (RS^?) by Ag(cyclam)²⁺ to RS^· radicals which undergo rapid dimerization to form disulfide (RSSR). From the postulated mechanism and the observed kinetics a rate expression was derived, and second-order rate constants and activation parameters were calculated. The pK _a values of the acid dissociation reaction of DMP were also determined at four temperatures using spectrophotometric methods, and thermodynamic parameters calculated from the K _a values.     

Two-step one-electron transfer reaction of chromium(III) complex containing levodopa and uridine with N-bromosuccinimide

[Cr^III(LD)(Urd)(H₂O)₄](NO₃)₂?·?3H₂O (LD?=?Levodopa; Urd?=?uridine) was prepared and characterized. The product of the oxidation reaction was examined using HPLC. Kinetics of the oxidation of [Cr^III(LD)(Urd)(H₂O)₄]²⁺ with N-bromosuccinimide (NBS) in an aqueous solution was studied spectrophotometrically, with 1.0–5.0?×?10^?4?mol?dm^?3 complex, 0.5–5.0?×?10^?2?mol?dm^?3 NBS, 0.2–0.3?mol?dm^?3 ionic strength (I), and 30–50°C. The reaction is first order with respect to [Cr^III] and [NBS], decreases as pH increases in the range 5.46–6.54 and increases with the addition of sodium dodecyl sulfate (SDS, 0.0–1.0?×?10^?3?mol?dm^?3). Activation parameters including enthalpy, ΔH*, and entropy, ΔS*, were calculated. The experimental rate law is consistent with a mechanism in which the protonated species is more reactive than its conjugate base. It is assumed that the two-step one-electron transfer takes place via an inner-sphere mechanism. A mechanism for this reaction is proposed and supported by an excellent isokinetic relationship between ΔH* and ΔS* for some Cr^III complexes. Formation of [Cr^III(LD)(Urd)(H₂O)₄]²⁺ in vivo probably occurs with patients who administer the anti-Parkinson drug (Levodopa), since Cr^III is a natural food element. This work provides an opportunity to identify the nature of such interactions in vivo similar to that in vitro.     

Synthesis,characterization, and mechanism of trans-dichlorido-bis-(ethylenediamine)cobalt(III) with L-cystine in the presence of chloride

Substitution reactions of trans-[CoCl₂(en)₂]Cl (where en?=?ethylenediamine) with L-cystine has been studied in 1.0?×?10^?1?mol?dm^?3 aqueous perchlorate at various temperatures (303–323?K) and pH (4.45–3.30) using UV-Vis spectrophotometer on various [Cl^?] from 0.05 to 0.01?mol?L^?1. The products have been characterized by their physico-chemical and spectroscopic data. Trans-[CoCl(en)₂(H₂O)]²⁺, from the hydrolysis of trans-[CoCl₂(en)₂]⁺ in the presence of Cl^?, formed a complex with L-cystine at all temperatures in 1?:?1 molar ratio. L-cystine is bidentate to Co(III) through Co–N and Co–S bonds. Product formation and reversible reaction rate constants have been evaluated. The rate constants for SN_i mechanism have been evaluated and activation parameters E _a, ΔH ^#, and ΔS ^# are determined.     

Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline

Complex [Na(phen)₃][Cu(NPh₂)₂] ( 2 ), containing a linear bis(N‐phenylanilide)copper(I) anion and a distorted octahedral tris(1,10‐phenanthroline)sodium counter cation, has been isolated from the catalytic C? N cross‐coupling reaction with the CuI/phen/tBuONa (phen=1,10‐phenanthroline) catalytic system. Complex 2 can react with 4‐iodotoluene to produce 4‐methyl‐N,N‐diphenylaniline ( 3 a ) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C? N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh₂)₂]^? and [Cu(NPh₂)I]^? have been observed by in situ electron ionization mass spectrometry (ESI‐MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single‐crystal X‐ray diffraction analysis.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

The Effect of Sodium Dodecylbenzenesulfonate (SDBS) Micelles on a BelousovZhabotinsky Oscillating System Catalyzed with a Tetraazamacrocyclic Copper(II) Complex

This article deals with the influence of micelles of the anionic surfactant sodium dodecyl benzene sulfonate (SDBS) on the Belousov? Zhabotinsky (B? Z) oscillating reaction catalyzed by a tetraazamacrocyclic copper(II) complex [CuL](ClO₄)₂, an enzyme‐like catalyst (L=5,7,7,12,14,14‐hexamethyl‐1,4,8,11‐tetraazacyclotetradeca‐4,11‐diene). Unlike the classical B? Z oscillator in which malonic acid is usually used as a substrate, malic acid (an intermediate in the Krebs cycle) is involved in this oscillating system. Experiments reveal that formation of the SDBS micelles markedly affects the behavior of the oscillating reaction. It is found that there is a linear relationship between the change in the oscillation amplitude (ΔA) and the concentration of SDBS, whereas the change in the oscillation period (ΔT) is linearly proportional to the SDBS concentration. The most likely mechanism that involves the formation of the SDBS micelles and the effects of the micelles on the oscillating chemical system can be rationalized by assuming that the SDBS micelles are so negatively charged that they attract more [CuL]³⁺ than [CuL]²⁺. This hypothesis was confirmed by UV/VIS spectrophotometric measurements of a constant concentration of [CuL](ClO₄)₂ in different concentrations of SDBS; as the SDBS concentration increased, the absorbance of [CuL](ClO₄)₂ increased, while the maximum absorption wavelength for [CuL](ClO₄)₂ remained at 502 nm.     

Kinetic studies on the metal(II) tartarate–peroxomonosulfate reaction

The kinetics of oxidation of tartaric acid (TAR) by peroxomonosulfate (PMS) in the presence of Cu(II) and Ni(II) ions was studied in the pH range 4.05–5.20 and also in alkaline medium (pH ～12.7). The rate was calculated by measuring the [PMS] at various time intervals. The metal ions concentration range used in the kinetic studies was 2.50 × 10^?5 to 1.00 × 10^?4 M [Cu(II)], 2.50 × 10^?4 to 2.00 × 10^?3M [Ni(II)], 0.05 to 0.10 M [TAR], and µ = 0.15 M. The metal(II) tartarates, not TAR/tartarate, are oxidized by PMS. The oxidation of copper(II) tartarate at the acidic pH shows an appreciable induction period, usually 30–60 min, as in classical autocatalysis reaction. The induction period in nickel(II) tartarate is small. Analysis of the [PMS]–time profile shows that the reactions proceed through autocatalysis. In alkaline medium, the Cu(II) tartarate–PMS reaction involves autocatalysis whereas Ni(II) tartarate obeys simple first‐order kinetics with respect to [PMS]. The calculated rate constants for the initial oxidation (k₁) and catalyzed oxidation (k₂) at [TAR] = 0.05 M, pH 4.05, and 31°C are Cu(II) (1.00 × 10^?4 M): k₁ = 4.12 × 10^?6 s^?1, k₂ = 7.76 × 10^?1 M^?1s^?1 and Ni(II) (1.00 × 10^?3 M): k₁ = 5.80 × 10^?5 s^?1, k₂ = 8.11 × 10^?2 M^?1 s^?1. The results suggest that the initial reaction is the oxidative decarboxylation of the tartarate to an aldehyde. The aldehyde intermediate may react with the alpha hydroxyl group of the tartarate to give a hemi acetal, which may be responsible for the autocatalysis. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 620–630, 2011     

Kinetics and mechanism of ruthenium (III) catalyzed oxidation of ethanol by cerium (IV) in aqueous sulfuric acid media

The kinetics of oxidation of ethanol by cerium(IV) in presence of ruthenium(III) (in the order of 10^?7 mol dm^?3) in aqueous sulfuric acid media have been followed at different temperatures (25–40°C). The rate of disappearance of cerium(IV) in the title reaction increases sharply with increasing [C₂H₅OH] to a value independent of [C₂H₅OH] over a large range (0.2–1.0 mol dm^?3) in which the rate law conforms to: where [Ru]_T gives the total ruthenium (III) concentration. The values of 10^?3k_c and 10^?3k_d are 3.6 ± 0.1 dm³ mol^?1 s^?1 and 3.9 ± 0.2 s^?1, respectively, at 40°C, I = 3.0 mol dm^?3. The proposed mechanism involves the formation of ruthenium(III)^? substrate complex which undergoes oxidation at the rate determining step by cerium(IV) to form ruthenium(IV)^? substrate complex followed by the rapid red-ox decomposition giving rise to the catalyst and ethoxide radical which is oxidized by cerium(IV) rapidly. The mechanism is consistent with the existence of the complexes Ru^III · (C₂H₅OH) and Ru^III · (C₂H₅O^?) and both are kinetically active. The overall bisulphate dependence conforms to: k_obsd = A[Ru]_T/{1 + C[HSO₄^?]} where A = 2.2 × 10⁴ dm³ mol^?1 s^?1, C = 1.3 at 40°C, [H⁺] = 0.5 mol dm^?3, and I = 3.0 mol dm^?3. The observations are consistent with the Ce(SO₄)₂ as the kinetically active species. © 1995 John Wiley & Sons, Inc.     

Ruthenium(III)- and osmium(VIII)-catalyzed oxidation of 2-thiouracil by bromamine-B in acid and alkaline media: a kinetic and mechanistic study

The kinetics of oxidation of 2-thiouracil (TU) by sodium N-bromobenzenesulphonamide or bromamine-B (BAB) have been studied in an HCl medium, catalyzed by RuCl₃, and in a NaOH media with OsO₄ as catalyst, at 313 K. The stoichiometry and oxidation products are the same in both cases, but their kinetic patterns were found to be different. In acid medium the rate shows a first order dependence in each of [BAB] and [TU], and is dependent on [Ru^III]. The reaction rate is inversely dependent on [H⁺]. In alkaline medium, the rate is first order in [BAB] and in [Os^VIII] and zero order in [TU]. The reaction rate is dependent on [NaOH]. Activation parameters have been evaluated, solvent isotope effects have been studied in D₂O medium, and equilibrium constants were calculated. The activation parameters and rate constants indicate that the catalytic efficiency is: Os^VIII > Ru^III. The proposed mechanisms and the derived rate laws are consistent with the observed kinetics.     

Kinetics and mechanism for the atmospheric oxidation of 1,1,2-trifluoroethane (HFC 143)

The rate constant for the reaction of the hydroxyl radical with 1,2,2-trifuoroethane has been determined over the temperature range 278–323 K using a relative rate technique. The results provide a value of k(OH + CH₂FCHF₂) = 2.65 × 10^?12 exp(?1542 ± 500/T) cm³ molecule^?1 s^?1 based on k(OH + CH₃CCl₃) = 1.2 × 10^?12 exp(?1400 ± 200/T) cm³ molecule^?1 s^?1 for the rate constant of the reference reaction. The chlorine atom initiated photooxidation of CH₂CHF₂ was investigated from 255 to 330 K and as a function of O₂ pressure at 1 atmosphere total pressure using Fourier transform infrared spectroscopy. The major carbon-containing products were CHFO and CF₂O suggesting that the alkoxy radicals CH₂FCF₂O and CHF₂CHFO, formed in the reaction, react predominantly by carbon-carbon bond cleavage. The results indicate that formation of CHF₂CFO from the reaction of CHF₂CHFO radicals with O₂ will be unimportant under all atmospheric conditions. © 1995 John Wiley & Sons, Inc.     

Mechanistic investigation of the oxidation of vitamin B1 with sodium N-chlorobenzenesulfonamide in presence of ruthenium(III) catalyst in hydrochloric acid medium: a kinetic approach

The oxidative cleavage of vitamin B₁ (thiamine hydrochloride, THM) with sodium N-chlorobenzenesulfonamide (chloramine-B, CAB) has been kinetically investigated in HCl medium in presence of ruthenium(III) catalyst at 308 K. The oxidation reaction follows the rate law, −d[CAB]/dt = k [CAB] [Ru(III)] [H⁺] [THM]^a [Cl⁻]^b, where a and b are less than unity. Variation of ionic strength of the medium and addition of the reaction product, benzenesulfonamide (BSA) had no significant effect on the reaction rate. The change in relative permittivity of the medium affected by changing the solvent composition with acetonitrile has been studied. The stoichiometry of the reaction was found to be 1:1, and N-[(4-amino-2-methylpyrimidine-5-yl)methyl]benzensulfonamide and 2-(4-methylthiazol-5-yl)ethanol were identified as the oxidation products of vitamin B₁. The reaction constants involved in the mechanism were computed. The reaction was studied at different temperatures and the overall activation parameters have been evaluated. C₆H₅SO₂NHCl has been postulated as the reactive oxidizing species. The observed results have been explained by plausible mechanisms and the relative rate laws have been deduced. Correspondence: Kikkeri Narasimhasetty Mohana, Department of Studies in Chemistry, University of Mysore, Manasagangotri, Mysore 570 006, India.     

Substituent effects on enol nitrosation of 1,3‐diketones

The keto–enol tautomerism of 3‐chloro‐pentane‐2,4‐dione (ClPD) was studied in aqueous micellar solutions of cationic, anionic, and nonionic surfactants. The enol of ClPD tautomerizes rapidly in water to the equilibrium proportions of the keto form, K_E=0.55; whereas the keto–enol conversion of 3‐ethyl‐pentane‐2,4‐dione (EPD) is a much slower reaction than the enol nitrosation. Kinetics of enol –nitrosation of both ClPD and EPD in aqueous acid medium using nitrous acid shows first‐order dependence upon [ketone] and linear or curve relationships of the observed rate constant, k_o, as a function of [nitrite] or [H⁺]; the observed behavior depends on the molecular structure of diketone and varies with the experimental conditions. The reaction is strongly catalyzed by Cl^?, Br^?, or SCN^?, and the observed rate constant shows a curve dependence on [Br^?] or [SCN^?], which is more pronounced at high acidity. The results are consistent with a reaction mechanism in which the nitrosation occurs initially on the enol–oxygen and releasing a proton to form a chelate–nitrosyl complex intermediate in steady state. Fine differences on the mechanistic spectrum of enols nitrosation are considered on the basis of the molecular structure of the diketone. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 668–679, 2012     

Reactions of (Nonafluorocyclohexen-1-yl)xenon(II) Hexafluoroarsenate with Halide Anions

The products of the reaction between the electrophilic alkenylxenonium cation [1-Xe⁺–C₆F₉] and the halide anions I^?, Br^?, Cl^? and F^? depend on the hardness of the halide anion. With the soft halides I^? and Br^? Xe(II) is formally displaced by halogen as well in basic MeCN as in superacidic (AHF¹), whereas with hard fluoride and chloride no reaction takes place in AHF. In MeCN F^? initiates the formation of alkenyl radicals, which abstract hydrogen from the solvent, whereas Cl^? exhibits borderline character: RH and RCl formation. Possible reaction paths are discussed. The reactivity of the arylxenonium cation [C₆F₅Xe]⁺ in AHF toward halide ions is reported and the relative electrophilicity of the cations [C₆F₅Xe]⁺ and [1-Xe⁺–C₆F₉] is determined by the competitive reaction with Cl^?. In addition the synthesis of cyclohexene 1-CF₃–C₆F₉ from C₆F₅CF₃ and XeF₂ is performed and its electrophilicity is compared with that of the aromatic compound C₆F₅CF₃.