Synthesis and characterization of Pb<Subscript>1–x</Subscript>La<Subscript>x</Subscript>TiO<Subscript>3</Subscript> nanocrystalline powders

Pb_1–xLa_xTiO₃ (PLT) nanocrystalline powders were obtained by polymeric precursor method. The samples were analyzed by differential scanning calorimetry (DSC) and thermogravimetry (TG) techniques to characterize properly the distinct thermal events occurring during synthesis. The X-ray diffraction patterns show a tetragonal structure for the samples with x=0.10 and 0.15. An increase of the lanthanum concentration to x=0.20 led to a highly symmetric structure, cubic on average. The powders obtained at the end of the synthesis had an average particle size of 30 to 70 nm.     

Thermal behaviour and properties of Na<Subscript>2</Subscript>O-TiO<Subscript>2</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Differential scanning calorimetry (DSC) and thermomechanical analysis (TMA) were used to study the thermal behaviour of (50-x)Na₂O-xTiO₂-50P₂O₅ and 45Na₂O-yTiO₂-(55-y)P₂O₅ glasses. The addition of TiO₂ to the starting glasses (x=0 and y=5 mol% TiO₂) resulted in a nonlinear increase of glass transition temperature and dilatation softening temperature, whereas the thermal expansion coefficient decreased. All prepared glasses crystallize under heating within the temperature range of 300–610°C. The contribution of the surface crystallization mechanism over the internal one increases with increasing TiO₂ content. With increasing TiO₂ content the temperature of maximum nucleation rate is also gradually shifted from a value close to the glass transition temperature towards the crystallization temperature. X-ray diffraction measurements showed that the major compounds formed by glass crystallization were NaPO₃, TiP₂O₇ and NaTi₂(PO₄)₃. The chemical durability of the glasses without titanium oxide is very poor, but with the replacement of Na₂O or P₂O₅ by TiO₂, it increases sharply.     

Formation and properties of the Fe<Subscript>8</Subscript>V<Subscript>10</Subscript>W<Subscript>16–x</Subscript>Mo<Subscript>x</Subscript>O<Subscript>85</Subscript> type solid solution

Solid solution phases of a formula Fe₈V₁₀W_16–xMo_xO₈₅ where 0≤x≤4, have been obtained, possessing a structure of the compound Fe₈V₁₀W₁₆O₈₅. It was found on the base of XRD and DTA investigations that these solution phases melted incongruently, with increasing the value of x, in the temperature range from 1108 (x=0) to 1083 K (x=4) depositing Fe₂WO₆ and WO₃. The increase of the Mo⁶⁺ ions content in the crystal lattice of Fe₈V₁₀W₁₆O₈₅ causes the lattice parameters a=b contraction with cbeing almost constant. IR spectra of the Fe₈V₁₀W_16–xMo_xO₈₅ solid solution phases have been recorded.     

Effect of PEG with different <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> as template direction reagent on preparation of porous TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> with assistance of supercritical CO<Subscript>2</Subscript>

Titania–silica composite have been prepared using polyethylene glycol (PEG) with different molecular weights (M _w), PEG20000, PEG10000, and PEG2000, as template in supercritical carbon dioxide (SC CO₂). The composite precursors were dissolved in SC CO₂ and impregnated into PEG templates using SC CO₂ as swelling agent and carrier. After removing the template by calcination at suitable temperature, the titania–silica composite were obtained. The composite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and nitrogen sorption–desorption experiment. Photocatalytic activity of the samples has been investigated by photodegradation of methyl orange. Results indicate that there are many Si–O–Ti linkages in the TiO₂/SiO₂ composite; the PEG template has a significant influence on the structure of TiO₂/SiO₂. In addition, the TiO₂/SiO₂ prepared with PEG10000 exhibited high photocatalytic efficiency. So this work supplies a clue to control and obtain the TiO₂/SiO₂ composite with different photocatalytic reactivity with the aid of suitable PEG template in supercritical CO₂.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Sol–gel processing of IrO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> mixed metal oxides based on a hexachloroiridate precursor

Mixed IrO₂–TiO₂ oxides were prepared by the sol–gel method upon acid-catalysed hydrolysis of an iridium solution in ethanol mixed with titanium tetraethoxide in ethanol. The iridium solution was obtained by reaction of the sodium hexachloroiridate(IV) precursor in the presence of sodium ethoxide in ethanol. Gels were formed in all but the high-Ir samples. Analysis of the dried gels showed minority-phase enrichment at the surface and the presence of Ir(III), while microscopy showed evidence for dispersed iridium-containing nanoparticles (1–20 nm in diameter). XRD powder patterns of the calcined material showed peaks due to a small amount of crystalline NaCl impurity which could be removed by washing. This left amorphous phases, except in the Ir:Ti 3:2 case, which showed evidence for the presence of separate crystalline oxide phases: anatase, IrO₂ and Ti _x Ir_1−x O₂.     

Dielectric properties and I-V characteristics of (Pb<Subscript>0.4</Subscript>Sr<Subscript>0.6</Subscript>)TiO<Subscript>3</Subscript> thin films improved by TiO<Subscript>2</Subscript> buffer layers

A TiO₂ thin buffer layer was introduced between the (Pb_0.4Sr_0.6)TiO₃ (PST) film and the Pt/Ti/SiO₂/Si substrate in an attempt to improve their electrical properties. Both TiO₂ and PST layers were prepared by a chemical solution deposition method. It was found that the TiO₂ buffer layer increased the (100)/(001) preferred orientation of PST and decreased the surface roughness of the films, leading to an enhancement in electrical properties including an increase in dielectric constant and in its tunability by DC voltage, as well as a decrease in dielectric loss and leakage current density. At an optimized thickness of the TiO₂ buffer layer deposited using 0.02 mol/l TiO₂ sol, the 330-nm-thick PST films had a dielectric constant, loss and tunability of 1126, 0.044 and 60.7% at 10 kHz, respectively, while the leakage current density was 1.95 × 10⁻⁶ A/cm² at 100 kV/cm.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Electrical conductivity studies in the system Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript>-Li<Subscript>1.33</Subscript>Ti<Subscript>1.67</Subscript>O<Subscript>4</Subscript>

Electrical conductivity in the monoclinic Li₂TiO₃, cubic Li_1.33Ti_1.67O₄, and in their mixture has been studied by impedance spectroscopy in the temperature range 20–730 °C. Li₂TiO₃ shows low lithium ion conductivity, σ₃₀₀≈10^–6 S/cm at 300 °C, whereas Li_1.33Ti_1.67O₄ has 3×10^–8 at 20 °C and 3×10^–4 S/cm at 300 °C. Structural properties are used to discuss the observed conductivity features. The conductivity dependences on temperature in the coordinates of 1000/T versus log_e(σT) are not linear, as the conductivity mechanism changes. Extrinsic and intrinsic conductivity regions are observed. The change in the conductivity mechanism in Li₂TiO₃ at around 500–600 °C is observed and considered as an effect of the first-order phase transition, not reported before. Formation of solid solutions of Li_{2– x} Ti_{1+ x} O₃ above 900 °C significantly increases the conductivity. Irradiation by high-energy (5 MeV) electrons causes defects and the conductivity in Li₂TiO₃ increases exponentially. A dose of 144 MGy yields an increase in conductivity of about 100 times at room temperature. Electronic Publication     

Comparative Study of the Oxygen Storage Capacity of Pt/M<Subscript>x</Subscript>O<Subscript>y</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Systems

The oxygen storage capacity of 1% Pt/15% M_xO_y/Al₂O₃ systems containing a rare-earth or an alkaline-earth metal oxide or TiO₂ as the oxygen-storing component was studied. Oxygen storage capacity was evaluated as the amount of C₃H₈ reacting at 400°C with oxygen that was taken up by the catalyst during oxidative treatment. The systems containing a rare-earth metal oxide or TiO₂ possess the highest oxygen storage capacity among the catalysts examined (80 and 75 µmol C₃H₈/g Cat, respectively). Of the BaO and SrO systems, the latter is of interest, although its oxygen storage capacity (∼27 µmol C₃H₈/g Cat) is somewhat lower than the oxygen storage capacity of any rare-earth metal oxide or the TiO₂ system.__________Translated from Kinetika i Kataliz, Vol. 46, No. 4, 2005, pp. 585–589.Original Russian Text Copyright © 2005 by Sinel’nikov, Tolkachev, Stakheev.     

Sol–gel synthesis,characterization and photocatalytic activity of mesoporous TiO<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3 </Subscript>granules

Mesoporous TiO₂/γ-Al₂O₃ composite granules were prepared by combining sol–gel/oil-drop method, using various titania solution. The product granules can be used as a photocatalyst or adsorbent in moving, fluidized bed reactors. The phase composition and pore structure of the granules can be controlled by calcination temperature and using different titania solution. In the photocatalysis of NH₃ decomposition, TiO₂/γ-Al₂O₃ granules using Degussa P25 powder treated thermally at 450 °C showed the highest catalytic ability. However, TiO₂/γ-Al₂O₃ granules using titania made by hydrothermal method had comparable performance in NH₃ decomposition.     

Phase equilibria and isomorphism in the LiVWO<Subscript>6</Subscript>-NaVWO<Subscript>6</Subscript> system

Compounds of composition Li _x Na_{1 − x} VWO₆ (0 ≤ x ≤ 1), which are synthetic analogues of brannerite-type minerals, were produced for the first time by solid-state synthesis at high temperatures. The structure of the compounds and their unlimited miscibility in the solid phase in the LiVWO₆-NaVWO₆ binary system were determined by X-ray diffraction. The phase equilibrium diagram was studied by differential thermal analysis together with thermodynamic modeling. It was found that the system under investigation is described by the regular solid solutions model.     

Synthesis of the mixed oxide catalysts based upon the nickel-copper hydrotalcites of the type Ni<Subscript>x</Subscript>Cu<Subscript>6-x</Subscript>Cr<Subscript>2</Subscript>(OH)<Subscript>16</Subscript>(CO<Subscript>3</Subscript>)×4H<Subscript>2</Subscript>O

Summary High resolution TG coupled to a gas evolution mass spectrometer has been used to study the thermal properties of a chromium based series of Ni/Cu hydrotalcites of formulae Ni_xCu_6-xCr₂(OH)₁₆(CO₃)×4H₂O where x varied from 6 to 0. The effect of increased Cu composition results in the increase of the endotherms and mass loss steps to higher temperatures. Evolved gas mass spectrometry shows that water is lost in a number of steps and that the interlayer carbonate anion is lost simultaneously with hydroxyl units. Differential scanning calorimetry was used to determine the heat flow steps for the thermal decomposition of the synthetic hydrotalcites. Hydrotalcites in which M²⁺ consist of Cu, Ni or Co form important precursors for mixed metal-oxide catalysts. The application of these mixed metal oxides is in the wet catalytic oxidation of low concentrations of retractable organics in water. Therefore, the thermal behaviour of synthetic hydrotalcites, Ni_xCu_6-xCr₂(OH)₁₆CO₃×nH₂O was studied by thermal analysis techniques in order to determine the correct temperatures for the synthesis of the mixed metal oxides.     

Microstructure and properties of sol-gel derived Pb(Zr<Subscript>0.3</Subscript>Ti<Subscript>0.7</Subscript>)O<Subscript>3</Subscript> thin films on GaN/sapphire for nanoelectromechanical systems

Highly (111) oriented, phase-pure perovskite Pb(Zr_0.3Ti_0.7)O₃ (or PZT 30/70) thin films were deposited on single-crystal, (0001) wurtzite GaN/sapphire substrates using the sol-gel process and rapid thermal annealing. The phase, crystallinity, and stoichiometry of annealed PZT films were evaluated by X-ray diffraction and Rutherford backscattering spectroscopy. The atomic force microscopy revealed a smooth PZT surface (rms roughness ∼1.5 nm) with striations and undulations possibly influenced by the nature of the underlying GaN surface. The cross-sectional field-emission scanning electron microscopic images indicated a sharper PZT/GaN interface compared to that of sol-gel derived PZT on (111) Pt/TiO₂/SiO₂/(100) Si substrates. The capacitance-voltage (C-V) characteristics for PZT in the Pt/PZT/GaN (metal-ferroelectric-semiconductor or MFS) configuration were evaluated as a function of annealing temperature and applied voltage. The observed C-V hysteresis stemmed from trapped charge at defect sites within PZT. Also, the lower capacitance density (C/A = 0.35 μF/cm², where A is the area of an electrode) and remnant polarization (P _r ∼ 4 μC/cm²) for PZT in the MFS configuration, compared to the values for PZT in the MFM configuration (Pt/PZT/Pt), were attributed to the high depolarization field within PZT.     

Preparation of Ba(Ti,Sn)O<Subscript>3</Subscript> thin films by PVP-assisted sol–gel method and their dielectric properties

Ba(Ti_1−x Sn _x )O₃ (x = 0.10 or 0.15) thin films were deposited on Si(100) and Pt(111)/TiO _x /SiO₂/Si(100) substrates via sol–gel spin-coating. Crack-free thin films could be obtained by single-step deposition, where the thickness was about 0.46 and 0.29 μm at 1000 and 2000 rpm, respectively. Circular delaminated parts 100 μm in diameter, however, tended to appear in thicker films deposited at 1000 rpm. On both kinds of substrates, the films were crystallized between 500 and 600 °C, where the perovskite phase emerged as the primary phase, and the formation of single-phase perovskite was basically achieved between 700–800 °C. The films deposited on Pt(111)/TiO _x /SiO₂/Si(100) substrates, however, tended to have small SnO₂ and BaCO₃ diffraction peaks, which decreased with increasing spinning rate. The dielectric properties were evaluated on the films deposited on Pt(111)/TiO _x /SiO₂/Si(100) substrates at 2000 rpm. The films prepared by single-step depositions had dielectric constants of 350 and 230, and dielectric loss of 0.30 and 0.10 at x = 0.1 and 0.15, respectively. The films prepared by two time deposition had dielectric constants of 450 and 250, and dielectric loss of 0.21 and 0.19 at x = 0.10 and 0.15, respectively.     

Development of TiO<Subscript>2</Subscript> photocatalysts suitable for practical use and their applications in environmental cleanup

Recently, environmental disruption is proceeding on a global scale through the consumption of huge amounts of fossil fuels and the emission of various chemical substances. However, these substances resist bio-treatment. TiO₂ generates electrons and holes by irradiation with light. Most organic micro-pollutants, including dioxins, are decomposed into carbon dioxide and water by the effect of the holes with high oxidative potential. By using such a photocatalytic reaction, various applications are feasible for environmental cleanup. In general, TiO₂ powder has been utilized as photocatalyst, although TiO₂ powder photocatalyst has several disadvantages: (1) it is difficult to handle, (2) photocatalytic reaction is slow and it takes a lot of time for treatment and (3) it is difficult to apply to plastics and textiles, because the photocatalyst decomposes them. We have developed a photocatalyst suitable for practical use and have developed high-activity photocatalysts such as TiO₂ photocatalytic transparent film, photocatalytic silica-gel, apatite-coated TiO₂ photocatalyst usable for plastics and textiles, photocatalytic paper, photocatalytic blue charcoal and photocatalytic oxygen scavenger. The application of these high-activity photocatalysts has been studied in deodorization, anti-bacterial, self-cleaning, anti-stain, water treatment, air purification such as photocatalytic decomposition of dioxins and VOC, and NO _x removal. Now various photocatalytic articles using these new photocatalyst materials are on the market in Japan. Photocatalytic technology can create many valuable products for environmental use all over the world.     

Enhancement of thermoelectric performance of Na<Subscript>x</Subscript>Co<Subscript>2</Subscript>O<Subscript>4</Subscript> with Ag dispersion by precipitation from Ag<Superscript>+</Superscript> aqueous solution

Thermoelectric Na_xCo₂O₄/Ag composites were synthesized by citric acid complex (CAC) method and Ag precipitation from CH₃COOAg aqueous solution on the Na_xCo₂O₄ powders. Effects of the synthesis process on microstructure and thermoelectric performance of Na_xCo₂O₄/Ag composites were investigated. When the Na_xCo₂O₄ CAC powders were dipped in CH₃COOAg aqueous solution and dried, fine Ag particles less than around 300 nm in size were precipitated on the surface of Na_xCo₂O₄ powders. After the subsequent sintering process, the flaky Ag phase, the length and thickness of which were up to 5 and 1 μm, respectively, existed along interfaces between Na_xCo₂O₄ grains. The sizes of Ag particles obtained in this study were found to be smaller than those of the conventionally prepared Na_xCo₂O₄/Ag composites. The fine dispersion of Ag grains was effective for suppressing the increase in thermal conductivity due to the addition of metallic phase, Ag, and for improving the thermoelectric performance of Na_xCo₂O₄/Ag composites, suggesting that the synthesis technique composed of the CAC method and Ag precipitation from CH₃COOAg aqueous solution is significantly important process for thermoelectric Na_xCo₂O₄/Ag composites.     

Influence of MnO<Subscript>2</Subscript> on the photocatalytic activity of P-25 TiO<Subscript>2</Subscript> in the degradation of methyl orange

Influences of α-MnO₂, β-MnO₂, and δ-MnO₂ on the photocatalytic activity of Degussa P-25 TiO₂ have been investigated through the photocatalytic degradation of methyl orange. The TiO₂ photocatalyst, before and after being contaminated by MnO₂, was characterized by UV-visible diffuse reflectance spectroscopy (UV-vis DRS), photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS). The results showed that photocatalytic activity of TiO₂ could be inhibited significantly or completely deactivated due to the presence of even a small amount of MnO₂ particles. It was found that the poisoning effect varied with the crystal phases of MnO₂ and the effect was in the order δ-MnO₂ >α-MnO₂ >β-MnO₂. The poisoning effect was attributed to the formation of heterojunctions between MnO₂ and TiO₂ particles. The heterojunctions changed the chemical state of Ti⁴⁺ and O²⁻ sites in the crystalline phase of TiO₂. MnO₂ in contact with TiO₂ particles also broadens the band-gap of TiO₂, which decreases UV absorption of TiO₂. It can also create some deep impurity energy levels serving as photoelectron-photohole recombination center, which accelerates the electron-hole recombination. Supported by the National Natural Science Foundation of China (Grant No. 20477009) and the Natural Science Foundation of Hebei Province (Grant No. E2005000183)     

Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.