[C6H14N]PbBr3: An ABX3‐Type Semiconducting Perovskite Hybrid with Above‐Room‐Temperature Phase Transition

Organic–inorganic hybrid perovskites, with the formula ABX₃ (A=organic cation, B=metal cation, and X=halide; for example, CH₃NH₃PbI₃), have diverse and intriguing physical properties, such as semiconduction, phase transitions, and optical properties. Herein, a new ABX₃‐type semiconducting perovskite‐like hybrid, (hexamethyleneimine)PbBr₃ ( 1 ), consisting of one‐dimensional inorganic frameworks and cyclic organic cations, is reported. Notably, the inorganic moiety of 1 adopts a perovskite‐like architecture and forms infinite columns composed of face‐sharing PbBr₆ octahedra. Strikingly, the organic cation exhibits a highly flexible molecular configuration, which triggers an above‐room‐temperature phase transition, at T_c=338.8 K; this is confirmed by differential scanning calorimetry (DSC), specific heat capacity (C_p), and dielectric measurements. Further structural analysis reveals that the phase transition originates from the molecular configurational distortion of the organic cations coupled with small‐angle reorientation of the PbBr₆ octahedra inside the inorganic components. Moreover, temperature‐dependent conductivity and UV/Vis absorption measurements reveal that 1 also displays semiconducting behavior below T_c. It is believed that this work will pave a potential way to design multifeatured perovskite hybrids by utilizing cyclic organic amines.     

A two‐dimensional organic–inorganic hybrid perovskite‐type semiconductor: poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]]

Recently, with the prevalence of `perovskite fever', organic–inorganic hybrid perovskites (OHPs) have attracted intense attention due to their remarkable structural variability and highly tunable properties. In particular, the optical and electrical properties of organic–inorganic hybrid lead halides are typical of the OHP family. Besides, although three‐dimensional hybrid perovskites, such as [CH₃NH₃]PbX₃ (X = Cl, Br or I), have been reported, the development of new organic–inorganic hybrid semiconductors is still an area in urgent need of exploration. Here, an organic–inorganic hybrid lead halide perovskite is reported, namely poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]], {(C₅H₁₆NP)[PbBr₄]}_n, in which an organic cation is embedded in inorganic two‐dimensional (2D) mesh layers to produce a sandwich structure. This unique sandwich 2D hybrid perovskite material shows an indirect band gap of ～2.700 eV. The properties of this compound as a semiconductor are demonstrated by a series of optical characterizations and indicate potential applications for optical devices.     

Self‐assembly of long‐chain quaternary ammonium cations in a hybrid inorganic–organic material with one‐dimensional polymeric tribromidoplumbate(II)

catena‐Poly[benzyldecyldimethylammonium [plumbate(II)‐tri‐μ‐bromido]], {(C₁₉H₃₄N)[PbBr₃]}_n, crystallizes as an inorganic–organic hybrid following monoclinic space‐group symmetry P2₁/c. The structure consists of extended chains running along the [001] direction and built of [PbBr₃]⁻ units. These inorganic chains are separated by interdigitated ammonium cations which form hydrophilic layers through weak C—H...Br interactions. The architecture is essentialy the same as found for n‐alkylbenzyldimethylammonium bromides.     

Macroscopic Chirality of Supramolecular Gels Formed from Achiral Tris(ethyl cinnamate) Benzene‐1,3,5‐tricarboxamides

A C₃‐symmetric benzene‐1,3,5‐tricarboxamide substituted with ethyl cinnamate was found to self‐assemble into supramolecular gels with macroscopic chirality in a DMF/H₂O mixture. The achiral compound simultaneously formed left‐ and right‐handed twists in an unequal number, thus resulting in the macroscopic chirality of the gels without any chiral additives. Furthermore, ester–amide exchange reactions with chiral amines enabled the control of both the handedness of the twists and the macroscopic chirality of the gels, depending on the structures of the chiral amines. These results provide new prospects for understanding and regulating symmetry breaking in assemblies of supramolecular gels formed from achiral molecular building blocks.     

A three‐dimensional homochiral metal–organic framework constructed from manganese(II) with S‐carboxymethyl‐N‐(p‐tosyl)‐l‐cysteine and 4,4′‐bipyridine

In the chiral polymeric title compound, poly[aqua(4,4′‐bipyridine)[μ₃‐S‐carboxylatomethyl‐N‐(p‐tosyl)‐l ‐cysteinato]manganese(II)], [Mn(C₁₂H₁₃NO₆S₂)(C₁₀H₈N₂)(H₂O)]_n, the Mn^II ion is coordinated in a distorted octahedral geometry by one water molecule, three carboxylate O atoms from three S‐carboxyatomethyl‐N‐(p‐tosyl)‐l ‐cysteinate (Ts‐cmc) ligands and two N atoms from two 4,4′‐bipyridine molecules. Each Ts‐cmc ligand behaves as a chiral μ₃‐linker connecting three Mn^II ions. The two‐dimensional frameworks thus formed are further connected by 4,4′‐bipyridine ligands into a three‐dimensional homochiral metal–organic framework. This is a rare case of a homochiral metal–organic framework with a flexible chiral ligand as linker, and this result demonstrates the important role of noncovalent interactions in stabilizing such assemblies.     

Vinyl polymerization initiated by system of organic halides and tertiary amines

A study of the polymerization of vinyl monomers with binary systems of tertiary amines and various organic halides containing chemical bonds such as C? Cl, N? Cl, O? Cl, S? Cl, and Si? Cl has been made at 60°C. Some of the binary systems were found to be effective as radical initiator in the polymerization of methyl methacrylate. The relative initiating activities of the halides in the presence of dimethylaniline were found to be in the following order: tert-C₄H₉OCl > n-C₄H₉NCl₂ > (n-C₄H₉)₂NCl ? CH₃SiCl₃ ? C₆H₅SiCl₃ > C₆H₅SO₂Cl > C₆H₅Cl > C₆H₅PCl₂. Styrene and vinyl acetate polymerized only with the initiator system of dimethylaniline and benzyl chloride. Tri-n-butylamine was less active than dimethylaniline. Pyridine and 4-vinylpyridine, in combination with some organic halides, also initiated the polymerization of methyl methacrylate. The N-vinylcarbazole–benzenesulfonyl chloride system, in the presence of methyl methacrylate, gave only the homopolymer of N-vinylcarbazole.     

The inorganic–organic hybrid zinc phosphite poly[(μ3‐hydrogen phosphito‐κ3O:O′:O′′)(piperidin‐1‐ium‐4‐carboxylate‐κO)zinc(II)]

A new inorganic–organic hybrid zinc phosphite, [Zn(HPO₃)(C₆H₁₁NO₂)]_n, has been synthesized hydrothermally. Protonated piperidin‐1‐ium‐4‐carboxylate (PDCA) was generated in situ by hydrolysis of the piperidine‐4‐carboxamide precursor. The P atom possesses a typical PO₃H pseudo‐pyramidal geometry. The crystal structure features an unusual (3,4)‐connected two‐dimensional inorganic zinc–phosphite layer, with organic PDCA ligands appended to the sheets and protruding into the interlayer region. Helical chains of opposite chirality are involved in the construction of a puckered sheet structure.     

Dichlorido[(S,RS)‐1‐diphenylphosphino‐2‐(ethylsulfanylmethyl)ferrocene]palladium(II)

The reaction of enantiomerically pure planar chiral ferrocene phosphine thioether with bis(acetonitrile)dichloridopalladium yields the title square‐planar mononuclear palladium complex as an enantiomerically pure single diastereoisomer, [PdFe(C₅H₅)(C₂₀H₂₀PS)Cl₂]. The planar chirality of the ligand is retained in the complex and fully controls the central chirality on the S atom. The absolute configuration, viz. S for the planar chirality and R for the S atom, is unequivocally determined by refinement of the Flack parameter.     

Supramolecular structures of bis‐thionooxalamic acid esters derived from (±)‐cyclohexane‐1,2‐diamine and (±)‐1,2‐diphenylethylenediamine

The bis‐thionooxalamic acid esters trans‐(±)‐diethyl N,N′‐(cyclohexane‐1,2‐diyl)bis(2‐thiooxamate), C₁₄H₂₂N₂O₄S₂, and (±)‐N,N′‐diethyl (1,2‐diphenylethane‐1,2‐diyl)bis(2‐thiooxamate), C₂₂H₂₄N₂O₄S₂, both consist of conformationally flexible molecules which adopt similar conformations with approximate C₂ rotational symmetry. The thioamide and ester parts of the thiooxamate group are significantly twisted along the central C—C bond, with the S=C—C=O torsion angles in the range 30.94 (19)–44.77 (19)°. The twisted s‐cis conformation of the thionooxamide groups facilitates assembly of molecules into a one‐dimensional polymeric structure via intermolecular three‐center C=S...NH...O=C hydrogen bonds and C—H...O interactions formed between molecules of the opposite chirality.     

Sulfur as hydrogen‐bond acceptor in cocrystals of 2‐thio‐modified thymine

Doubly and triply hydrogen‐bonded supramolecular synthons are of particular interest for the rational design of crystal and cocrystal structures in crystal engineering since they show a high robustness due to their high stability and good reliability. The compound 5‐methyl‐2‐thiouracil (2‐thiothymine) contains an ADA hydrogen‐bonding site (A = acceptor and D = donor) if the S atom is considered as an acceptor. We report herein the results of cocrystallization experiments with the coformers 2,4‐diaminopyrimidine, 2,4‐diamino‐6‐phenyl‐1,3,5‐triazine, 6‐amino‐3H‐isocytosine and melamine, which contain complementary DAD hydrogen‐bonding sites and, therefore, should be capable of forming a mixed ADA–DAD N—H…S/N—H…N/N—H…O synthon (denoted synthon 3s_{N·S;N·N;N·O}), consisting of three different hydrogen bonds with 5‐methyl‐2‐thiouracil. The experiments yielded one cocrystal and five solvated cocrystals, namely 5‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine (1/2), C₅H₆N₂OS·2C₄H₆N₄, (I), 5‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylformamide (2/2/1), 2C₅H₆N₂OS·2C₄H₆N₄·C₃H₇NO, (II), 5‐methyl‐2‐thiouracil–2,4‐diamino‐6‐phenyl‐1,3,5‐triazine–N,N‐dimethylformamide (2/2/1), 2C₅H₆N₂OS·2C₉H₉N₅·C₃H₇NO, (III), 5‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylformamide (2/2/1), (IV), 2C₅H₆N₂OS·2C₄H₆N₄O·C₃H₇NO, (IV), 5‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylacetamide (2/2/1), 2C₅H₆N₂OS·2C₄H₆N₄O·C₄H₉NO, (V), and 5‐methyl‐2‐thiouracil–melamine (3/2), 3C₅H₆N₂OS·2C₃H₆N₆, (VI). Synthon 3s_{N·S;N·N;N·O} was formed in three structures in which two‐dimensional hydrogen‐bonded networks are observed, while doubly hydrogen‐bonded interactions were formed instead in the remaining three cocrystals whereby three‐dimensional networks are preferred. As desired, the S atoms are involved in hydrogen‐bonding interactions in all six structures, thus illustrating the ability of sulfur to act as a hydrogen‐bond acceptor and, therefore, its value for application in crystal engineering.     

Cocrystals of 6‐methyl‐2‐thiouracil: presence of the acceptor–donor–acceptor/donor–acceptor–donor synthon

The results of seven cocrystallization experiments of the antithyroid drug 6‐methyl‐2‐thiouracil (MTU), C₅H₆N₂OS, with 2,4‐diaminopyrimidine, 2,4,6‐triaminopyrimidine and 6‐amino‐3H‐isocytosine (viz. 2,6‐diamino‐3H‐pyrimidin‐4‐one) are reported. MTU features an ADA (A = acceptor and D = donor) hydrogen‐bonding site, while the three coformers show complementary DAD hydrogen‐bonding sites and therefore should be capable of forming an ADA/DAD N—H...O/N—H...N/N—H...S synthon with MTU. The experiments yielded one cocrystal and six cocrystal solvates, namely 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–1‐methylpyrrolidin‐2‐one (1/1/2), C₅H₆N₂OS·C₄H₆N₄·2C₅H₉NO, (I), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine (1/1), C₅H₆N₂OS·C₄H₆N₄, (II), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylacetamide (2/1/2), 2C₅H₆N₂OS·C₄H₆N₄·2C₄H₉NO, (III), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylformamide (2/1/2), C₅H₆N₂OS·0.5C₄H₆N₄·C₃H₇NO, (IV), 2,4,6‐triaminopyrimidinium 6‐methyl‐2‐thiouracilate–6‐methyl‐2‐thiouracil–N,N‐dimethylformamide (1/1/2), C₄H₈N₅⁺·C₅H₅N₂OS⁻·C₅H₆N₂OS·2C₃H₇NO, (V), 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylformamide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₃H₇NO, (VI), and 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–dimethyl sulfoxide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₂H₆OS, (VII). Whereas in cocrystal (I) an R₂²(8) interaction similar to the Watson–Crick adenine/uracil base pair is formed and a two‐dimensional hydrogen‐bonding network is observed, the cocrystals (II)–(VII) contain the triply hydrogen‐bonded ADA/DAD N—H...O/N—H...N/N—H...S synthon and show a one‐dimensional hydrogen‐bonding network. Although 2,4‐diaminopyrimidine possesses only one DAD hydrogen‐bonding site, it is, due to orientational disorder, triply connected to two MTU molecules in (III) and (IV).     

Alloying n‐Butylamine into CsPbBr3 To Give a Two‐Dimensional Bilayered Perovskite Ferroelectric Material

Cesium‐lead halide perovskites (e.g. CsPbBr₃) have gained attention because of their rich physical properties, but their bulk ferroelectricity remains unexplored. Herein, by alloying flexible organic cations into the cubic CsPbBr₃, we design the first cesium‐based two‐dimensional (2D) perovskite ferroelectric material with both inorganic alkali metal and organic cations, (C₄H₉NH₃)₂CsPb₂Br₇ ( 1 ). Strikingly, 1 shows a high Curie temperature (T_c=412 K) above that of BaTiO₃ (ca. 393 K) and notable spontaneous polarization (ca. 4.2 μC cm^?2), triggered by not only the ordering of organic cations but also atomic displacement of inorganic Cs⁺ ions. To our knowledge, such a 2D bilayered Cs⁺‐based metal–halide perovskite ferroelectric material with inorganic and organic cations is unprecedented. 1 also shows photoelectric semiconducting behavior with large “on/off” ratios of photoconductivity (>10³).     

Histidinium-Driven Chirality Control of Self-Assembled Hybrid Molybdenum Oxyfluorides

Exploring macroscopic chiral materials with extended structures has become an important and fundamental topic in chemistry. To systematically control the chirality of novel organic–inorganic frameworks, histidinium-based cationic structure-directing agents containing specific chiral information are introduced. In this way, two chiral compounds, [(l -hisH₂)MoO₂F₄]₃ ⋅ H₂O ( L ) and [(d -hisH₂)MoO₂F₄]₃ ⋅ H₂O ( D ), and an achiral oxyfluoride, (l /d -hisH₂)MoO₂F₄ ( LD ) (his=histidine, C₆H₉N₃O₂) have been successfully self-assembled by a slow evaporation method. The structures of these compounds are composed of histidinium cations and distorted [MoO₂F₄]²⁻ octahedra. Surprisingly, the histidinium cations not only control macroscopic chirality, but also induce O/F ordering in MoO₂F₄ octahedra through hydrogen-bonding interactions. Compounds L and D crystallize in the extremely rare polar space group P1, and exhibit positive second harmonic generation (SHG) signals attributable to a net moment originating from the MoO₂F₄ groups. Solid-state circular dichroism (CD) spectra indicate that the MoO₂F₄ units templated by histidinium cations are chirally aligned through ionic interactions. Crystallization processes influenced by the chirality of the reported materials are also discussed herein.     

Poly­[lead(II)‐μ‐4,4‐bi­pyridine‐N:N′‐di‐μ‐bromo]

The title complex, [PbBr₂(bipy)]_n (bipy is 4,4′‐bi­pyridine, C₁₀H₈N₂), was obtained by hydro­thermal reaction of Pb(O₂CCH₃), NaBr and bipy. The bipy group acts as a linear bifunctional bridge forming a planar {–[Pb(bipy)]–}_n belt in the direction of the b axis. The remaining lead coordination sites are occupied by Br ions which link Pb centres in adjacent belts through double bridges to form extended two‐dimensional layers.     

Bis(4‐aminopyridinium) hexachloridostannate(IV) and bis(p‐toluidinium) hexachloridostannate(IV)

The crystal structures of the two organic–inorganic hybrids bis(4‐aminopyridinium) hexachloridostannate(IV), (C₅H₇N₂)₂[SnCl₆], and bis(p‐toluidinium) hexachloridostannate(IV), (C₇H₁₀N)₂[SnCl₆], differ in the way their cations pack in the layered structures. The Sn atom in the 4‐aminopyridinium compound lies on an inversion centre.     

Solvothermal Synthesis,Crystal Structure,and Strong Luminescence of the First Organic‐Templated Europium Sulfate Chloride

The first organic amine templated europium sulfate chloride [C₆N₄H₂₂]_0.5Cl[Eu(SO₄)₂ · H₂O] ( 1 ) was synthesized solvothermally and structurally characterized by single‐crystal X‐ray diffraction, IR spectroscopy, TGA, and ICP. Crystal analyses of compound 1 shows a novel inorganic layer constructed from [–Eu–O–S–O–]_n chains. The adjacent chains are connected by sharing the bridging SO₄^2– groups to generate eight‐membered rings. The very strong luminescence in the red light region indicates compound 1 is an excellent candidate for red fluorescent materials.     

Solvothermal Synthesis,Crystal Structure and Properties of the First Organic‐templated Holmium Sulfate [C2N2H10]3[Ho2(SO4)6·2H2O]

The first organic amine‐templated holmium sulfate [C₂N₂H₁₀]₃[Ho₂(SO₄)₆·2H₂O] ( 1 ) has been synthesized solvothermally and has been structurally characterized by single‐crystal X‐ray diffraction studies, IR spectroscopic, thermogravimetric (TG) and inductivity coupled plasma (ICP) measurements. Crystal analyses of compound 1 showed a novel inorganic layer constructed from the zigzag and helical [–Ho–O–S–O–]_n chains, both of the chains are connected by μ‐2 SO₄^2– groups to form 10‐membered rings. The solvent plays an important role during the formation of 1 .     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

Two packing motifs based upon chains of edge‐sharing PbI6 octa­hedra

The compounds catena‐poly[p‐phenyl­enediammonium [[diiodo­lead(II)]‐di‐μ‐iodo] dihydrate], {(C₆H₁₀N₂)[PbI₄]·2H₂O}_n, (I), and catena‐poly[bis­(3,5‐dimethyl­anilinium) [[diiodo­lead(II)]‐di‐μ‐iodo]], {(C₈H₁₂N)₂[PbI₄]}_n, (II), crystallize as organic–inorganic hybrids. As such, the structures consist of chains of [PbI₂]⁻ units extending along the c axis in (I) and along the b axis in (II). The asymmetric unit in (I) contains one Pb atom on a site of 2/m symmetry, two I atoms and a water molecule on mirror planes, and a p‐phenyl­enediammonium mol­ecule that sits around a site of 2/m symmetry with the C and N atoms on a mirror plane. In (II), the Pb atom is on a twofold axis and the two I atoms are on general positions. Each Pb atom is octa­hedrally coordinated to six I atoms, arranged as chains of edge‐sharing octa­hedra. Both compounds undergo hydrogen‐bonding inter­actions between the ammonium groups and the I atoms. In addition, there are hydrogen bonds between the water mol­ecules and the ammonium groups and halides in (I), and between the ammonium groups and the ring systems in (II).