Fluoroethylene Carbonate Enabling a Robust LiF‐rich Solid Electrolyte Interphase to Enhance the Stability of the MoS2 Anode for Lithium‐Ion Storage

As a high‐capacity anode for lithium‐ion batteries (LIBs), MoS₂ suffers from short lifespan that is due in part to its unstable solid electrolyte interphase (SEI). The cycle life of MoS₂ can be greatly extended by manipulating the SEI with a fluoroethylene carbonate (FEC) additive. The capacity of MoS₂ in the electrolyte with 10 wt % FEC stabilizes at about 770 mAh g^?1 for 200 cycles at 1 A g^?1, which far surpasses the FEC‐free counterpart (ca. 40 mAh g^?1 after 150 cycles). The presence of FEC enables a robust LiF‐rich SEI that can effectively inhibit the continual electrolyte decomposition. A full cell with a LiNi_0.5Co_0.3Mn_0.2O₂ cathode also gains improved performance in the FEC‐containing electrolyte. These findings reveal the importance of controlling SEI formation on MoS₂ toward promoted lithium storage, opening a new avenue for developing metal sulfides as high‐capacity electrodes for LIBs.     

Three‐Dimensional MoS2 Hierarchical Nanoarchitectures Anchored into a Carbon Layer as Graphene Analogues with Improved Lithium Ion Storage Performance

Much attention has recently been focused on the synthesis and application of graphene analogues of layered nanomaterials owing to their better electrochemical performance than the bulk counterparts. We synthesized graphene analogue of 3D MoS₂ hierarchical nanoarchitectures through a facile hydrothermal route. The graphene‐like MoS₂ nanosheets are uniformly dispersed in an amorphous carbon matrix produced in situ by hydrothermal carbonization. The interlaminar distance between the MoS₂ nanosheets is about 1.38 nm, which is far larger than that of bulk MoS₂ (0.62 nm). Such a layered architecture is especially beneficial for the intercalation and deintercalation of Li⁺. When tested as a lithium‐storage anode material, the graphene‐like MoS₂ hierarchical nanoarchitectures exhibit high specific capacity, superior rate capability, and enhanced cycling performance. This material shows a high reversible capacity of 813.5 mAh g^?1 at a current density of 1000 mA g^?1 after 100 cycles and a specific capacity as high as 600 mAh g^?1 could be retained even at a current density of 4000 mA g^?1. The results further demonstrate that constructing 3D graphene‐like hierarchical nanoarchitectures can effectively improve the electrochemical performance of electrode materials.     

Approaching the Lithiation Limit of MoS2 While Maintaining Its Layered Crystalline Structure to Improve Lithium Storage

MoS₂ holds great promise as high‐rate electrode for lithium‐ion batteries since its large interlayer can allow fast lithium diffusion in 3.0–1.0 V. However, the low theoretical capacity (167 mAh g^?1) limits its wide application. Here, by fine tuning the lithiation depth of MoS₂, we demonstrate that its parent layered structure can be preserved with expanded interlayers while cycling in 3.0–0.6 V. The deeper lithiation and maintained crystalline structure endows commercially micrometer‐sized MoS₂ with a capacity of 232 mAh g^?1 at 0.05 A g^?1 and circa 92 % capacity retention after 1000 cycles at 1.0 A g^?1. Moreover, the enlarged interlayers enable MoS₂ to release a capacity of 165 mAh g^?1 at 5.0 A g^?1, which is double the capacity obtained under 3.0–1.0 V at the same rate. Our strategy of controlling the lithiation depth of MoS₂ to avoid fracture ushers in new possibilities to enhance the lithium storage of layered transition‐metal dichalcogenides.     

Synthesis of 2D/2D Structured Mesoporous Co3O4 Nanosheet/N‐Doped Reduced Graphene Oxide Composites as a Highly Stable Negative Electrode for Lithium Battery Applications

Mesoporous Co₃O₄ nanosheets (Co₃O₄‐NS) and nitrogen‐doped reduced graphene oxide (N‐rGO) are synthesized by a facile hydrothermal approach, and the N‐rGO/Co₃O₄‐NS composite is formulated through an infiltration procedure. Eventually, the obtained composites are subjected to various characterization techniques, such as XRD, Raman spectroscopy, surface area analysis, X‐ray photoelectron spectroscopy (XPS), and TEM. The lithium‐storage properties of N‐rGO/Co₃O₄‐NS composites are evaluated in a half‐cell assembly to ascertain their suitability as a negative electrode for lithium‐ion battery applications. The 2D/2D nanostructured mesoporous N‐rGO/Co₃O₄‐NS composite delivered a reversible capacity of about 1305 and 1501 mAh g^?1 at a current density of 80 mA g^?1 for the 1st and 50th cycles, respectively. Furthermore, excellent cyclability, rate capability, and capacity retention characteristics are noted for the N‐rGO/Co₃O₄‐NS composite. This improved performance is mainly related to the existence of mesoporosity and a sheet‐like 2D hierarchical morphology, which translates into extra space for lithium storage and a reduced electron pathway. Also, the presence of N‐rGO and carbon shells in Co₃O₄‐NS should not be excluded from such exceptional performance, which serves as a reliable conductive channel for electrons and act as synergistically to accommodate volume expansion upon redox reactions. Ex‐situ TEM, impedance spectroscopy, and XPS, are also conducted to corroborate the significance of the 2D morphology towards sustained lithium storage.     

Three‐Dimensional Hierarchical Constructs of MOF‐on‐Reduced Graphene Oxide for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical MOF‐on‐reduced graphene oxide (MOF‐on‐rGO) compartment was successfully synthesized through an in situ reduced and combined process. The unique properties of the MOF‐on‐rGO compartment combining the polarity and porous features of MOFs with the high conductivity of rGO make it an ideal candidate as a sulfur host in lithium–sulfur (Li‐S) batteries. A high initial discharge capacity of 1250 mAh g^?1 at a current density of 0.1 C (1.0 C=1675 mAh g^?1) was reached using the MOF‐on‐rGO based electrode. At the rate of 1.0 C, a high specific capacity of 601 mAh g^?1 was still maintained after 400 discharge–charge cycles, which could be ascribed to the synergistic effect between MOFs and rGO. Both the hierarchical structures of rGO and the polar pore environment of MOF retard the diffusion and migration of soluble polysulfide, contributing to a stable cycling performance. Moreover, the spongy‐layered rGO can buffer the volume expansion and contraction changes, thus supplying stable structures for Li‐S batteries.     

Coated/Sandwiched rGO/CoSx Composites Derived from Metal–Organic Frameworks/GO as Advanced Anode Materials for Lithium‐Ion Batteries

Rational composite materials made from transition metal sulfides and reduced graphene oxide (rGO) are highly desirable for designing high‐performance lithium‐ion batteries (LIBs). Here, rGO‐coated or sandwiched CoS_x composites are fabricated through facile thermal sulfurization of metal–organic framework/GO precursors. By scrupulously changing the proportion of Co²⁺ and organic ligands and the solvent of the reaction system, we can tune the forms of GO as either a coating or a supporting layer. Upon testing as anode materials for LIBs, the as‐prepared CoS_x‐rGO‐CoS_x and rGO@CoS_x composites demonstrate brilliant electrochemical performances such as high initial specific capacities of 1248 and 1320 mA h g^?1, respectively, at a current density of 100 mA g^?1, and stable cycling abilities of 670 and 613 mA h g^?1, respectively, after 100 charge/discharge cycles, as well as superior rate capabilities. The excellent electrical conductivity and porous structure of the CoS_x/rGO composites can promote Li⁺ transfer and mitigate internal stress during the charge/discharge process, thus significantly improving the electrochemical performance of electrode materials.     

Bimetal‐organic Framework‐derived Co9S8/ZnS@NC Heterostructures for Superior Lithium‐ion Storage

Heterostructure engineering of electrode materials, which is expected to accelerate the ion/electron transport rates driven by a built‐in internal electric field at the heterointerface, offers unprecedented promise in improving their cycling stability and rate performance. Herein, carbon nanotubes with Co₉S₈/ZnS heterostructures embedded in a N‐doped carbon framework (Co₉S₈/ZnS@NC) have been rationally designed via an in‐situ vapor chemical transformation strategy with the aid of thiophene, which not only acted as carbon source for the growth of carbon nanotubes but also as sulfur source for the sulfurization of metal Zn and Co. Density functional theory (DFT) calculation shows an about 3.24 eV electrostatic potential difference between ZnS and Co₉S₈, which results in a strong electrostatic field across the interface that makes electrons transfer from Co₉S₈ to the ZnS side. As expected, a stable cycling performance with reversible capacity of 411.2 mAh g^?1 at 1000 mA g^?1 after 300 cycles, excellent rate capability (324 mAh g^?1 at 2000 A g^?1) and a high percentage of pseudocapacitance contribution (87.5% at 2.2 mv/s) for lithium‐ion batteries (LIBs) are achieved. This work provides a possible strategy for designing multicomponent heterostructural materials for application in energy storage and conversion fields.     

High‐Performance Sodium‐Ion Batteries and Sodium‐Ion Pseudocapacitors Based on MoS2/Graphene Composites

Sodium‐ion energy storage, including sodium‐ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium‐ion energy storage. It is an intriguing prospect, especially for large‐scale applications, owing to its low cost and abundance. MoS₂ sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS₂/G) were constructed. The enlarged d‐spacing, a contribution of the graphene matrix, and the unique properties of the MoS₂/G substantially optimize Na storage behavior, by accommodating large volume changes and facilitating fast ion diffusion. MoS₂/G exhibits a stable capacity of approximately 350 mAh g^?1 over 200 cycles at 0.25 C in half cells, and delivers a capacitance of 50 F g^?1 over 2000 cycles at 1.5 C in pseudocapacitors with a wide voltage window of 0.1–2.5 V.     

Fiber‐in‐Tube Design of Co9S8‐Carbon/Co9S8: Enabling Efficient Sodium Storage

The sodium‐ion battery is a promising battery technology owing to its low price and high abundance of sodium. However, the sluggish kinetics of sodium ion makes it hard to achieve high‐rate performance, therefore impairing the power density. In this work, a fiber‐in‐tube Co₉S₈‐carbon(C)/Co₉S₈ is designed with fast sodiation kinetics. The experimental and simulation analysis show that the dominating capacitance mechanism for the high Na‐ion storage performance is due to abundant grain boundaries, three exposed layer interfaces, and carbon wiring in the design. As a result, the fiber‐in‐tube hybrid anode shows a high specific capacity of 616 mAh g^?1 after 150 cycles at 0.5 A g^?1. At 1 A g^?1, a capacity of ca. 451 mAh g^?1 can be achieved after 500 cycles. More importantly, a high energy density of 779 Wh kg^?1 and power density of 7793 W kg^?1 can be obtained simultaneously.     

Two‐Dimensional Cobalt‐/Nickel‐Based Oxide Nanosheets for High‐Performance Sodium and Lithium Storage

Two‐dimensional (2D) nanomaterials are one of the most promising types of candidates for energy‐storage applications due to confined thicknesses and high surface areas, which would play an essential role in enhanced reaction kinetics. Herein, a universal process that can be extended for scale up is developed to synthesise ultrathin cobalt‐/nickel‐based hydroxides and oxides. The sodium and lithium storage capabilities of Co₃O₄ nanosheets are evaluated in detail. For sodium storage, the Co₃O₄ nanosheets exhibit excellent rate capability (e.g., 179 mA h g^?1 at 7.0 A g^?1 and 150 mA h g^?1 at 10.0 A g^?1) and promising cycling performance (404 mA h g^?1 after 100 cycles at 0.1 A g^?1). Meanwhile, very impressive lithium storage performance is also achieved, which is maintained at 1029 mA h g^?1 after 100 cycles at 0.2 A g^?1. NiO and NiCo₂O₄ nanosheets are also successfully prepared through the same synthetic approach, and both deliver very encouraging lithium storage performances. In addition to rechargeable batteries, 2D cobalt‐/nickel‐based hydroxides and oxides are also anticipated to have great potential applications in supercapacitors, electrocatalysis and other energy‐storage‐/‐conversion‐related fields.     

A Robust Solid Electrolyte Interphase Layer Augments the Ion Storage Capacity of Bimetallic‐Sulfide‐Containing Potassium‐Ion Batteries

Metal–organic framework‐derived NiCo_2.5S₄ microrods wrapped in reduced graphene oxide (NCS@RGO) were synthesized for potassium‐ion storage. Upon coordination with organic potassium salts, NCS@RGO exhibits an ultrahigh initial reversible specific capacity (602 mAh g^?1 at 50 mA g^?1) and ultralong cycle life (a reversible specific capacity of 495 mAh g^?1 at 200 mA g^?1 after 1 900 cycles over 314 days). Furthermore, the battery demonstrates a high initial Coulombic efficiency of 78 %, outperforming most sulfides reported previously. Advanced ex situ characterization techniques, including atomic force microscopy, were used for evaluation and the results indicate that the organic potassium salt‐containing electrolyte helps to form thin and robust solid electrolyte interphase layers, which reduce the formation of byproducts during the potassiation–depotassiation process and enhance the mechanical stability of electrodes. The excellent conductivity of the RGO in the composites, and the robust interface between the electrodes and electrolytes, imbue the electrode with useful properties; including, ultrafast potassium‐ion storage with a reversible specific capacity of 402 mAh g^?1 even at 2 A g^?1.     

Micro‐MoS2 with Excellent Reversible Sodium‐Ion Storage

Low storage capacity and poor cycling stability are the main drawbacks of the electrode materials for sodium‐ion (Na‐ion) batteries, due to the large radius of the Na ion. Here we show that micro‐structured molybdenum disulfide (MoS₂) can exhibit high storage capacity and excellent cycling and rate performances as an anode material for Na‐ion batteries by controlling its intercalation depth and optimizing the binder. The former method is to preserve the layered structure of MoS₂, whereas the latter maintains the integrity of the electrode during cycling. A reversible capacity of 90 mAh g^?1 is obtained on a potential plateau feature when less than 0.5 Na per formula unit is intercalated into micro‐MoS₂. The fully discharged electrode with sodium alginate (NaAlg) binder delivers a high reversible capacity of 420 mAh g^?1. Both cells show excellent cycling performance. These findings indicate that metal chalcogenides, for example, MoS₂, can be promising Na‐storage materials if their operation potential range and the binder can be appropriately optimized.     

Hierarchical Metal Sulfide/Carbon Spheres: A Generalized Synthesis and High Sodium‐Storage Performance

The development of suitable anode materials is far from satisfactory and is a major scientific challenge for a competitive sodium‐ion battery technology. Metal sulfides have demonstrated encouraging results, but still suffer from sluggish kinetics and severe capacity decay associated with the phase change. Herein we show that rational electrode design, that is, building efficient electron/ion mixed‐conducting networks, can overcome the problems resulting from conversion reactions. A general strategy for the preparation of hierarchical carbon‐coated metal sulfide (MS?C) spheres through thermal sulfurization of metal glycerate has been developed. We demonstrate the concept by synthesizing highly uniform hierarchical carbon coated vanadium sulfide (V₂S₃?C) spheres, which exhibit a highly reversibly sodium storage capacity of 777 mAh g^?1 at 100 mA g^?1, excellent rate capability (410 mAh g^?1 at 4000 mA g^?1), and impressive cycling ability.     

Facile Preparation and Lithium Storage Properties of TiO2@Graphene Composite Electrodes with Low Carbon Content

Over the past decade, TiO₂/graphene composites as electrodes for lithium ion batteries have attracted a great deal of attention for reasons of safety and environmental friendliness. However, most of the TiO₂/graphene electrodes have large graphene content (9–40 %), which is bound to increase the cost of the battery. Logically, reducing the amount of graphene is a necessary part to achieve a green battery. The synthesis of TiO₂ nanosheets under solvothermal conditions without additives is now demonstrated. Through mechanical mixing TiO₂ nanosheets with different amount of reduced graphene (rGO), a series of TiO₂@graphene composites was prepared with low graphene content (rGO content 1, 2, 3, and 5 wt %). When these composites were evaluated as anodes for lithium ion batteries, it was found that TiO₂+3 wt % rGO manifested excellent cycling stability and a high specific capacity (243.7 mAh g^?1 at 1 C; 1 C=167.5 mA g^?1), and demonstrated superior high‐rate discharge/charge capability at 20 C.     

Interlayer-expanded MoS<Subscript>2</Subscript>/graphene composites as anode materials for high-performance lithium-ion batteries

A facile strategy was developed to prepare interlayer-expanded MoS₂/graphene composites through a one-step hydrothermal reaction method. MoS₂ nanosheets with several-layer thickness were observed to uniformly grow on the surface of graphene sheets. And the interlayer spacing of MoS₂ in the composites was determined to expand to 0.95 nm by ammonium ions intercalation. The MoS₂/graphene composites show excellent lithium storage performance as anode materials for Li-ion batteries. Through gathering advantages including expanded interlayers, several-layer thickness, and composited graphene, the composites exhibit reversible capacity of 1030.6 mAh g^?1 at the current density of 100 mA g^?1 and still retain a high specific capacity of 725.7 mAh g^?1 at a higher current density of 1000 mA g^?1 after 50 cycles.     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

Synthesis of Cobalt Sulfide Multi‐shelled Nanoboxes with Precisely Controlled Two to Five Shells for Sodium‐Ion Batteries

We report the synthesis of cobalt sulfide multi‐shelled nanoboxes through metal–organic framework (MOF)‐based complex anion conversion and exchange processes. The polyvanadate ions react with cobalt‐based zeolitic imidazolate framework‐67 (ZIF‐67) nanocubes to form ZIF‐67/cobalt polyvanadate yolk‐shelled particles. The as‐formed yolk‐shelled particles are gradually converted into cobalt divanadate multi‐shelled nanoboxes by solvothermal treatment. The number of shells can be easily controlled from 2 to 5 by varying the temperature. Finally, cobalt sulfide multi‐shelled nanoboxes are produced through ion‐exchange with S^2? ions and subsequent annealing. The as‐obtained cobalt sulfide multi‐shelled nanoboxes exhibit enhanced sodium‐storage properties when evaluated as anodes for sodium‐ion batteries. For example, a high specific capacity of 438 mAh g^?1 can be retained after 100 cycles at the current density of 500 mA g^?1.     

Fabrication of Fe‐Doped LiCoO2 Sandwich‐Like Nanocomposites as Excellent Performance Cathode Materials for Lithium‐Ion Batteries

In this article, the two‐layer sandwiched graphene@LiFe_0.2Co_0.8O₂ nanoparticles (SG@LFCO) have been prepared and investigated as high‐rate and long‐life cathode materials for rechargeable lithium‐ion batteries. The materials possess a high‐surface area (267.1 m² g^?1) and lots of void spaces. By combining various favorable conditions, such as Fe doping, coating graphene, and designing novel morphology, the as‐prepared materials deliver a specific capacity of 115 mAh g^?1 at 10 C. At the 0.1 C cycling rate, the capacity retention of 97.2 % is sustained after 250 cycles and a coulombic efficiency of around 97.6 % is obtained.     

Self‐Assembling Synthesis of Free‐standing Nanoporous Graphene–Transition‐Metal Oxide Flexible Electrodes for High‐Performance Lithium‐Ion Batteries and Supercapacitors

The synthesis of nanoporous graphene by a convenient carbon nanofiber assisted self‐assembly approach is reported. Porous structures with large pore volumes, high surface areas, and well‐controlled pore sizes were achieved by employing spherical silica as hard templates with different diameters. Through a general wet‐immersion method, transition‐metal oxide (Fe₃O₄, Co₃O₄, NiO) nanocrystals can be easily loaded into nanoporous graphene papers to form three‐dimensional flexible nanoarchitectures. When directly applied as electrodes in lithium‐ion batteries and supercapacitors, the materials exhibited superior electrochemical performances, including an ultra‐high specific capacity, an extended long cycle life, and a high rate capability. In particular, nanoporous Fe₃O₄–graphene composites can deliver a reversible specific capacity of 1427.5 mAh g^?1 at a high current density of 1000 mA g^?1 as anode materials in lithium‐ion batteries. Furthermore, nanoporous Co₃O₄–graphene composites achieved a high supercapacitance of 424.2 F g^?1. This work demonstrated that the as‐developed freestanding nanoporous graphene papers could have significant potential for energy storage and conversion applications.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.