Extraction of diclofenac by SiO2‐NH2@Fe3O4 and its determination: Central composite design

In this work, magnetic nanoparticles (Fe₃O₄) were prepared by simple co‐precipitation method in aqueous medium and then subsequently modified with tetraethyl orthosilicate and 3‐aminopropyl triethylenesilane. The properties of the particles were characterized by FTIR spectroscopy X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy. The SiO₂‐NH₂@Fe₃O₄ particles were successfully applied to simultaneously enrich and separate diclofenac from water, urine, and plasma samples. The method, which takes the advantages of both nanoparticle adsorption and magnetic phase separation from the sample solution, could avoid some of the time‐consuming experimental procedures related to the traditional solid phase extraction. The main parameters affecting extraction and desorption efficiency such as pH, amount of SiO₂‐NH₂@Fe₃O₄, volume of desorption solvent, and extraction time were screened. The significant variables were optimized by using central composite design. At optimum conditions values of variables set as pH = 4, 10 mg SiO₂‐NH₂@Fe₃O₄, 0.5 mL methanol, and 15 min extraction time and then the extracted diclofenac were injected to HPLC for analysis. The linear response (r² > 0.9992) was obtained in the range of 0.004–15 µg/mL with detection limit 0.0012 µg/mL and extraction recovery was in the range of 92–96% with RSD < 5% (n = 6).     

Epoxidation of cyclohexene with H2O2 over efficient water‐tolerant heterogeneous catalysts composed of mono‐substituted phosphotungstic acid on co‐functionalized SBA‐15

A series of Keggin‐type heteropolyacid‐based heterogeneous catalysts (Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15) were synthesized via immobilized transition metal mono‐ substituted phosphotungstic acids (Co‐/Fe‐/Cu‐POM) on octyl‐amino‐co‐functionalized mesoporous silica SBA‐15 (octyl‐NH₂‐SBA‐15). Characterization results indicated that Co‐/Fe‐/Cu‐POM units were highly dispersed in mesochannels of SBA‐15, and both types of Brønsted and Lewis acid sites existed in Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15 catalysts. Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst showed excellent catalytic performance in H₂O₂‐mediated cyclohexene epoxidation with 83.8% of cyclohexene conversion, 92.8% of cyclohexene oxide selectivity, and 98/2 of epoxidation/allylic oxidation selectivity. The order of catalytic activity was Co‐POM‐octyl‐NH₃‐SBA‐15 > Fe‐POM‐octyl‐NH₃‐SBA‐15 > Cu‐POM‐octyl‐NH₃‐SBA‐15. In order to obtain insights into the role of ‐octyl moieties during catalysis, an octyl‐free catalyst (Co‐POM‐NH₃‐SBA‐15) was also synthesized. In comparison with Co‐POM‐NH₃‐SBA‐15, Co‐POM‐octyl‐NH₃‐SBA‐15 showed enhanced catalytic properties (viz. activity and selectivity) in cyclohexene epoxidation. Strong chemical bonding between ‐NH₃⁺ anchored on the surface of SBA‐15 and heteropolyanions resulted in excellent stability of Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst, and it could be reused six times without considerable loss of activity.     

Preparation of a magnetic porous carbon with hierarchical structures from waste biomass for the extraction of some carbamates

In this study, corn stalk was used to synthesize a magnetic adsorbent by pyrolysis together with KHCO₃ as the chemical activator and iron(III) salt as the magnetic reagent. The characterization by scanning electron microscopy, transmission electron microscopy and N₂ adsorption–desorption analysis showed that the magnetic carbon adsorbent had a structure of hierarchical pores with a high specific surface area. To evaluate its adsorption performance, the adsorbent was used for the extraction of carbamates pesticides (propoxur, isoprocarb and fenobucarb) from water and zucchini samples before high‐performance liquid chromatography analysis. The result showed that the adsorbent had a good adsorption capability for the analytes. Under the optimized conditions, a good linearity for the analytes existed in the range of 0.1–100.0 ng/mL for water samples and 0.5–100.0 ng/g for zucchini samples with the correlation coefficients of 0.9992–0.9998. The limits of detection for the analytes at a signal to noise ratio of 3 were 0.03 ng/mL for water samples and 0.20–0.50 ng/g for zucchini samples.     

Effective removal of 2,4,6‐trinitrophenol over hexagonal metal–organic framework NH2‐MIL‐88B(Fe)

A nanostructured organic–inorganic framework, hexagonal NH₂‐MIL‐88B, has been prepared through a facile one‐pot reflux reaction and then it was characterized using various techniques. The as‐prepared sample with high specific surface area (414 m² g^?1) showed excellent adsorption for 2,4,6‐trinitrophenol (TNP) in the liquid phase. Detailed studies of the adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were conducted. The adsorption mechanism of NH₂‐MIL‐88B for TNP may be ascribed to hydrogen bond interaction, and the complexation between ─OH in TNP and unsaturated Fe(III) on the surface of NH₂‐MIL‐88B. The maximum adsorption capacity of NH₂‐MIL‐88B for TNP based on the Langmuir isotherm was 163.66 mg g^?1. The as‐prepared NH₂‐MIL‐88B adsorbent seems to be a promising material in practice for TNP removal from aqueous solution.     

Optimization of heteroatom doped graphene oxide by deep eutectic solvents and the application for pipette‐tip solid‐phase extraction of flavonoids

In order to improve the permeation and adsorption properties of graphene oxide, heteroatoms and deep eutectic solvent were introduced in this study. After being modified, the structural properties of graphene oxide were improved and the materials were applied to the determination of myricetin and rutin in tea sample by pipette‐tip solid‐phase extraction method. The materials were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X‐Ray diffractomer, energy dispersive spectroscopy, atomic force microscope, and specific surface area by Brunauer–Emmett–Teller N₂ adsorption desorption analysis. Meanwhile, they were tested by static and dynamic adsorption. The result showed that the materials after modifying had better adsorption amount for myricetin and rutin than graphene oxide. The calibration graphs of myricetin and rutin in MeOH were linear over 0.10–500.00 µg/mL, and the limits of detection and quantification were in the range of 0.00546–0.0182 µg/mL and 0.00741–0.0247 µg/mL, respectively. A reliable analytical method was developed for recognition targets in tea sample by DES modified nitrogen‐doped graphene oxide with satisfactory extraction recoveries (myricetin 99.77%, rutin 98.14%). It was potential for the rapid purification of myricetin and rutin in tea sample combined with the pipette‐tip solid‐phase extraction.     

Development of magnetic dispersive microsolid-phase extraction using lanthanum phosphate nanoparticles doped on magnetic graphene oxide as a highly selective adsorbent for pesticide residues analysis in water and fruit samples

Magnetic graphene oxide/lanthanum phosphate nanocomposite (MGO@LaP) was synthesized and used as an efficient adsorbent for magnetic dispersive microsolid-phase extraction (MD-µ-SPE) of pesticides before gas chromatography–electron capture detector (GC–ECD) analysis. The adsorbent was thoroughly characterized with scanning electron microscopy, vibrating sample magnetometer, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. Optimized extraction conditions were investigated concerning extraction time, adsorbent amount, sample pH, and salt amount as well as desorption conditions (type and volume of desorption solvent and desorption time). Under the optimal conditions, the method demonstrated good linearity (3–1500 µg L^?1) with satisfactory determination coefficients of >?0.997 and low detection limits for both chlorpyrifos (0.67 µg L^?1) and hexaconazole (0.89 µg L^?1). Finally, the method showed high analyte relative recoveries in the range of 78–120% for the determination of the selected pesticides in water and fruit juice samples.

     

Solid‐phase purification and extraction for the determination of trace neonicotinoid pesticides in tea infusion

An analytical protocol that includes solid‐phase purification and extraction is successfully developed for the determination of trace neonicotinoid pesticides in tea infusion. The method consists of a purification on amino‐functionalized mesoporous silica SBA‐15 followed by a solid‐phase extraction based on graphene oxide before ultra high performance liquid chromatography with tandem mass spectrometry analysis. Parameters that significantly affected the extraction of the neonicotinoids onto graphene oxide, such as the amount of adsorbent, extraction time, pH, elution solvent, etc. were optimized. The amino‐functionalized mesoporous silica SBA‐15 has been proved to be an efficient adsorbent for removal of polyphenols especially catechins from tea infusion. Graphene oxide exhibits a very rapid adsorption rate (within 10 min) and high adsorption capacities for neonicotinoids at low initial concentration (0.01–0.5 mg/L). The analysis method gave a good determination coefficient (r² > 0.99) for each pesticide and high recoveries in the range of 72.2–95.0%. Powder X‐ray diffraction, Raman spectroscopy, transmission electron microscopy, and UV‐vis spectroscopy were utilized to identify the structure and morphology of graphene oxide. The adsorption driving force of neonicotinoids on graphene oxide mainly depends on π–π electron donor–acceptor interaction and electrostatic interaction.     

Preparation of magnetic molecularly imprinted polymer for dispersive solid‐phase extraction of valsartan and its determination by high‐performance liquid chromatography: Box‐Behnken design

In this work, core/shell magnetic molecularly imprinted polymer nanoparticles were synthesized for extraction and pre‐concentration of valsartan from different samples and then it was measured with high‐performance liquid chromatography. For preparation of molecularly imprinted polymer nanoparticles, Fe₃O₄ nanoparticles were coated with tetraethyl orthosilicate and then functionalized with 3‐(trimethoxysilyl) propyl methacrylate. In the next step, molecularly imprinted polymer nanoparticles were synthesized under reflux and distillation conditions via polymerization of methacrylic acid, valsartan (as a template), azobisisobutyronitrile and ethylene glycol dimethacrylate as cross linking. The properties of molecularly imprinted polymer nanoparticle were investigated by FTIR spectroscopy, field emission scanning electron microscopy, and X‐ray diffraction. Box‐Behnken design with the aid of desirability function was used for optimizing the effect of variables such as the amounts of molecularly imprinted polymer nanoparticles, time of sonication, pH, and volume of methanol on the extraction percentage of valsartan. According to the obtained results, the affecting variables extraction condition were set as 10 mg of adsorbent, 16 min for sonication, pH = 5.5 and 0.6 mL methanol. The obtained linear response (r² > 0.995) was in the range of 0.005–10 µg/mL with detection limit 0.0012 µg/mLand extraction recovery was in the range of 92–95% with standard deviation less than 6% (n = 3).     

Loading controlled magnetic carbon dots for microwave‐assisted solid‐phase extraction: Preparation,extraction evaluation and applications in environmental aqueous samples

An adsorbent of carbon dot@poly(glycidyl methacrylate)@Fe₃O₄ nanoparticles has been developed for the microwave‐assisted magnetic solid‐phase extraction of polycyclic aromatic hydrocarbons in environmental aqueous samples prior to high‐performance liquid chromatography with UV/visible spectroscopy detection. Poly(glycidyl methacrylate) was synthesized by atom transfer radical polymerization. The chain length and amount of carbon dots attached on them can be easily controlled through changing polymerization conditions, which contributes to tunable extraction performance. The successful fabrication of the nano‐adsorbent was confirmed by transmission electronic microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and vibrating sample magnetometry. The extraction performance of the adsorbent was evaluated by using polycyclic aromatic hydrocarbons as model analytes. The key factors influencing the extraction, such as microwave power, adsorption time, desorption time and desorption solvents were investigated in detail. Under the optimal conditions, the microwave‐assisted method afforded magnetic solid‐phase extraction with short extraction time, wide dynamic linear range (0.02–200 μg/L), good linearity (R² ≥ 98.57%) and low detection limits (20–90 ng/L) for model analytes. The adsorbent was successfully applied for analyzing polycyclic aromatic hydrocarbons in environmental aqueous samples and the recoveries were in the range of 86.0–124.2%. Thus, the proposed method is a promising candidate for fast and reliable preconcentration of trace polycyclic aromatic hydrocarbons in real water samples.     

Simple magnetization of Fe3O4/MIL‐53(Al)‐NH2 for a rapid vortex‐assisted dispersive magnetic solid‐phase extraction of phenol residues in water samples

The present work describes a simple route to magnetize MIL‐53(Al)‐NH₂ sorbent for rapid extraction of phenol residues from environmental samples. To extend the applications and performances of the metal‐organic frameworks in the field of adsorption materials, we combined the properties of metal‐organic frameworks and magnetite to decrease the extraction time and simplify the extraction process as well. In this study, a simple and quick vortex‐assisted dispersive magnetic solid phase extraction method for the extraction of ten United States Environmental Protection Agency's priority phenols from water samples prior to analysis by high‐performance liquid chromatography with photodiode array detection was proposed. The developed method exhibits a rapid enrichment of the target analytes within 10 s for extraction and 10 s for desorption. Low detection limits of 1.8‐41.7 µg/L and quantitation limits of 6.0‐139.0 µg/L with the relative standard deviations for intra‐ and interday analyses less than 12% were achieved. Satisfactory recoveries in the range of 80‐111% with the relative standard deviations less than 11% demonstrated that Fe₃O₄/MIL‐53(Al)‐NH₂ is promising sorbent in the field of magnetic solid‐phase extraction for environmental samples.     

Tailoring the Asymmetric Structure of NH2-UiO-66 Metal-Organic Frameworks for Light-promoted Selective and Efficient Gold Extraction and Separation

Designing adsorption materials with high adsorption capacities and selectivities is highly desirable for precious metal recovery. Desorption performance is also particularly crucial for subsequent precious metal recovery and adsorbent regeneration. Herein, a metal–organic framework (MOF) material (NH₂-UiO-66) with an asymmetric electronic structure of the central zirconium oxygen cluster has an exceptional gold extraction capacity of 2.04 g g⁻¹ under light irradiation. The selectivity of NH₂-UiO-66 for gold ions is up to 98.8 % in the presence of interfering ions. Interestingly, the gold ions adsorbed on the surface of NH₂-UiO-66 spontaneously reduce in situ, undergo nucleation and growth and finally achieve the phase separation of high-purity gold particles from NH₂-UiO-66. The desorption and separation efficiency of gold particles from the adsorbent surface reaches 89 %. Theoretical calculations indicate that -NH₂ functions as a dual donor of electrons and protons, and the asymmetric structure of NH₂-UiO-66 leads to energetically advantageous multinuclear gold capture and desorption. This adsorption material can greatly facilitate the recovery of gold from wastewater and can easily realize the recycling of the adsorbent.     

Facile Synthesis of Prussian Blue Derivate‐Modified Mesoporous Material via Photoinitiated Thiol–Ene Click Reaction for Cesium Adsorption

A novel strategy to synthesize a functional mesoporous material for efficient removal of cesium is reported. Specifically, Prussian blue derivate‐modified SBA‐15 (SBA‐15@FC) was prepared by photoinitiated thiol–ene reaction between thiol‐modified SBA‐15 and pentacyano(4‐vinyl pyridine)ferrate complex. The effects of weight percentage of the Prussian blue derivate, pH, adsorbent dose, co‐existing ions, and initial concentration were evaluated on the adsorption of cesium ions. The adsorption kinetically follows a pseudo‐second‐order model and reaches equilibrium within 2 h with a high adsorption capacity of about 13.90 mg Cs g^?1, which indicates that SBA‐15@FC is a promising adsorbent to effectively remove cesium from aqueous solutions.     

Effect of the amine type on thermal stability of modified mesoporous silica used for CO2 adsorption

In this study, the preparation by grafting of amino-functionalized SBA-15 molecular sieves was carried out. Amino-functionalized molecular sieves were synthesized using a silane coupling agent and different types of amination reagents which react with modified SBA-15. These composites were characterized by FT-IR spectroscopy, X-ray diffraction at low angles, nitrogen physisorption at 77 K, and evaluated by the adsorption of CO₂ and its temperature-programmed desorption—TPD. Thermal stability was investigated by TGA and DTA methods. In the view of a possible use of these amino-functionalized molecular sieves as sorbents for CO₂ removal, their adsorption–desorption properties towards CO₂ were also investigated by the TPD method. The mass loss of amino-functionalized molecular sieves above 215 °C was due to the oxidation and decomposition of amino propyl functional groups. This means that these composites could be used for adsorption of CO₂ at temperatures below 215 °C. The adsorption of CO₂ and its temperature programmed desorption using thermogravimetry were studied for amino-functionalized molecular sieves at 60 °C. The evolved gases during the adsorption–desorption of CO₂ on amino-functionalized molecular sieves were identified by online mass spectrometry coupled with thermogravimetry. CO₂ adsorption isotherms of functionalized samples at 60 °C showed that both the adsorption capacity (mg CO₂/g adsorbent) and the efficiency of amino groups (mol CO₂/mol NH₂) depend on the type of amination reagents and the amount of organic compound used.

     

Application of an optimized dispersive nanomaterial ultrasound‐assisted microextraction method for preconcentration of carbofuran and propoxur and their determination by high‐performance liquid chromatography with UV detection

An extraction method based on dispersive nanomaterial ultrasound‐assisted microextraction was used for the preconcentration of carbofuran and propoxur insecticides in water samples prior to high‐performance liquid chromatography with UV detection. ZnS:Ni nanoparticles were synthesized based on the reaction of the mixture of zinc acetate and nickel acetate with thioacetamide in aqueous media and then loaded on activated carbon (ZnS:Ni‐AC). Different methods were used for recognizing the properties of ZnS:Ni‐AC and then this nanomaterial was used for extraction of carbamate insecticide as new adsorbent. The influence of variables on the extraction method (such as amount of adsorbent (mg: NiZnS‐AC), pH and ionic strength of sample solution, vortex and ultrasonic time (min), ultrasound temperature and desorption volume (mL) was investigated by a screening 2^7–4 Plackett–Burman design. Then the significant variables were optimized by using a central composite design combined with a desirability function. At optimum conditions, this method had linear response >0.0060–10 μg/mL with detection limit 0.0015 μg/mL and relative standard deviations <5.0% (n = 3).     

Comparisons of glyphosate adsorption properties of different functional Cr‐based metal–organic frameworks

A Cr‐based metal–organic framework, namely, MIL‐101(Cr), was modified with amino (NH₂–) and urea (UR₂–) groups, and the materials were evaluated as adsorbents for glyphosate, and a comparison with commercial activated carbon was also discussed. The effects of the adsorption factors, such as adsorbent concentration, adsorption time, pH and ionic strength were mainly investigated. The results showed that a pseudo‐second‐order rate equation described the adsorption kinetics mechanisms well, while the Langmuir model and the Freundlich model fitted different adsorption isotherms, respectively. Among the adsorbents we studied, NH₂‐MIL‐101(Cr) showed the maximum adsorbing capacity, which is 64.25 mg/g when pH = 3.0, while UR₂‐MIL‐101(Cr) did not reach the best adsorption performance due to the steric hindrance. The work opens up a new way for the modification of metal–organic frameworks for adsorption process.     

Dehydrogenation of Isobutane to Isobutene with Carbon Dioxide over SBA‐15‐Supported Chromia‐Ceria Catalysts

A series of SBA‐15‐supported chromia‐ceria catalysts with 3% Cr and 1%–5% Ce (3Cr‐Ce/SBA) were prepared using an incipient wetness impregnation method. The catalysts were characterized by XRD, N₂ adsorption, SEM, TEM‐EDX, Raman spectroscopy, UV–vis spectroscopy, XPS and H₂‐TPR, and their catalytic performance for isobutane dehydrogenation with CO₂ was tested. The addition of ceria to SBA‐15‐supported chromia improves the dispersion of chromium species. 3Cr‐Ce/SBA catalysts are more active than SBA‐15‐supported chromia (3Cr/SBA), which is due to a higher concentration of Cr⁶⁺ species present on the former catalysts. The 3Cr‐3Ce/SBA catalyst shows the highest activity, which gives 35.4% isobutane conversion and 89.6% isobutene selectivity at 570 °C after 10 min of the reaction.     

Porous‐membrane‐protected polyaniline‐coated SBA‐15 nanocomposite micro‐solid‐phase extraction followed by high‐performance liquid chromatography for the determination of parabens in cosmetic products and wastewater

A SBA‐15/polyaniline para‐toluenesulfonic acid nanocomposite supported micro‐solid‐phase extraction procedure has been developed for the extraction of parabens (methylparaben, ethylparaben, and propylparaben) from wastewater and cosmetic products. The variables of interest in the extraction process were pH of sample, sample and eluent volumes, sorbent amount, salting‐out effect, extraction and desorption time, and stirring rate. A Plackett–Burman design was performed for the screening of variables in order to determine the significant variables affecting the extraction efficiency. Then, the significant factors were optimized by using a central composite design. The optimum experimental conditions found at 50 mL sample solution, extraction and desorption times of 40 and 20 min, respectively, 500 μL of 3% v/v acetic acid in methanol as eluent, 0.01 M salt addition, and 10 mg of the sorbent. Under the optimum conditions, the developed method provided detection limits in the range of 0.08–0.4 ng/mL with good repeatability (RSD% < 7) and linearity (r² = 0.997–0.999) for the three parabens. Finally, this fast and efficient method was employed for the determination of target analytes in cosmetic products and wastewater, and satisfactory results were obtained.     

Composites of poly(L‐lactide‐trimethylene carbonate‐glycolide) and surface modified SBA‐15 as bone repair material

This work aims to develop novel composites from a poly(L ‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer and mesoporous silica (SBA‐15) nanofillers surface modified by post‐synthetic functionalization. SBA‐15 first reacts with a silane coupling agent, γ‐aminopropyl‐trimethoxysilane to introduce ammonium group. PLLA chains were then grafted on the surface of SBA‐15 through ammonium initiated ring‐opening polymerization of L ‐lactide. Composites were prepared via solution mixing of PLTG terpolymer and surface modified SBA‐15. The structures and properties of pure SBA‐15, γ‐aminopropyl‐trimethoxysilane modified SBA‐15 (H₂N‐SBA‐15), PLLA modified SBA‐15 (PLLA‐NH‐SBA‐15), and PLTG/PLLA‐NH‐SBA‐15 composites were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscopy, N₂ adsorption‐desorption, differential scanning calorimetry, contact angle measurement, and mechanical testing. The results demonstrated that PLLA chains were successfully grafted onto the surface of SBA‐15 with grafting amounts up to 16 wt.%. The PLTG/PLLA‐NH‐SBA‐15 composites exhibit good mechanical properties. The tensile strength, Young's modulus, and elongation at break of the composite containing 5 wt.% of PLLA‐NH‐SBA‐15 were 39.9 MPa, 1.3 GPa, and 273.6%, respectively, which were all higher than those of neat PLTG or of the composite containing 5 wt.% of pure SBA‐15. Cytocompatibility tests showed that the composites present very low cytotoxicity.     

An easily organic–inorganic hybrid optical sensor based on dithizone impregnation on mesoporous SBA‐15 for simultaneous detection and removal of Pb(II) ions from water samples: Response‐surface methodology

In this study, a novel organic–inorganic hybrid adsorbent for single‐step detection and removal of Pb(II) ions based on dithizone (DZ) anchored on mesoporous SBA‐15 was fabricated. The designed solid optical sensor revealed rapid colorimetric responses and high selectivity. Central composite design (CCD) combined with desirability function (DF) was applied to evaluate the interactive effects and optimization of important variables such as pH value, mesoporous SBA‐15 dosage, contact time and initial concentration of Pb(II) ions and optimum conditions for each of the factors were obtained 6.0, 25 mg, 30 min and 20 μg ml^{− 1}, respectively. This adsorbent or solid optical chemo sensor exhibited a linear range of 1.0 to 100.0 μg ml⁻¹ of Pb(II) ion concentration with a detection limit of 0.07 μg ml⁻¹. This adsorbent was applied to determine and remove the Pb(II) in spiked samples. Various isotherm models such as Langmuir, Freundlich, Temkin and Dubinin–Radushkevich were studied for fitting the experimental equilibrium data. Langmuir model was chosen as an efficient model. Various kinetic models such as pseudo‐first, second order intraparticle, diffusion models were studied for analysis of experimental adsorption data and the pseudo second order model was chosen as an efficient model.