Acridan‐Grafted Poly(biphenyl germanium) with High Triplet Energy,Low Polarizability,and an External Heavy‐Atom Effect for Highly Efficient Sky‐Blue TADF Electroluminescence

We propose the novel σ–π conjugated polymer poly(biphenyl germanium) grafted with two electron‐donating acridan moieties on the Ge atom for use as the host material in a polymer light‐emitting diode (PLED) with the sky‐blue‐emitting thermally activated delayed fluorescence (TADF) material DMAC‐TRZ as the guest. Its high triplet energy (E_T) of 2.86 eV is significantly higher than those of conventional π–π conjugated polymers (E_T=2.65 eV as the limit) and this guest emitter (E_T=2.77 eV). The TADF emitter emits bluer emission than in other host materials owing to the low orientation polarizability of the germanium‐based polymer host. The Ge atom also provides an external heavy‐atom effect, which increases the rate of reverse intersystem crossing in this TADF guest, so that more triplet excitons are harvested for light emission. The sky‐blue TADF electroluminescence with this host/guest pair gave a record‐high external quantum efficiency of 24.1 % at maximum and 22.8 % at 500 cd m^?2.     

Acridan‐Grafted Poly(biphenyl germanium) with High Triplet Energy,Low Polarizability,and an External Heavy‐Atom Effect for Highly Efficient Sky‐Blue TADF Electroluminescence

We propose the novel σ–π conjugated polymer poly(biphenyl germanium) grafted with two electron‐donating acridan moieties on the Ge atom for use as the host material in a polymer light‐emitting diode (PLED) with the sky‐blue‐emitting thermally activated delayed fluorescence (TADF) material DMAC‐TRZ as the guest. Its high triplet energy (E_T) of 2.86 eV is significantly higher than those of conventional π–π conjugated polymers (E_T=2.65 eV as the limit) and this guest emitter (E_T=2.77 eV). The TADF emitter emits bluer emission than in other host materials owing to the low orientation polarizability of the germanium‐based polymer host. The Ge atom also provides an external heavy‐atom effect, which increases the rate of reverse intersystem crossing in this TADF guest, so that more triplet excitons are harvested for light emission. The sky‐blue TADF electroluminescence with this host/guest pair gave a record‐high external quantum efficiency of 24.1 % at maximum and 22.8 % at 500 cd m^?2.     

Synthesis of Linear and V-Shaped Carbazolyl-Substituted Pyridine-3,5-dicarbonitriles Exhibiting Efficient Bipolar Charge Transport and E-Type Fluorescence

With the aim of developing all-organic bipolar semiconductors with high charge mobility and efficient E-type fluorescence (so-called TADF) as environmentally friendly light-emitting materials for optoelectronic applications, four noble metals-free dyes with linear and V-shapes were designed using accepting pyridine-3,5-dicarbonitrile and donating carbazole units. By exploiting a donor-acceptor design strategy and using moieties with different donating and accepting abilities, TADF emitters with a wide variety of molecular weights were synthesized to achieve the optimum combination of charge-transporting and fluorescent properties in one TADF molecule. Depending on molecule structures, different TADF emitters capable of emitting in the range from 453 to 550 nm with photoluminescence quantum yields up to 98 % for the solutions in oxygen-free toluene were obtained. All compounds showed bipolar charge-transport. Hole mobility of 2.8×10⁻³ cm²/Vs at 7×10⁵ V cm⁻¹ was observed for the compound containing two di-tert-butyl-substituted carbazole moieties. The compounds were tested in both non-doped and doped organic light-emitting diodes using different hosts. It was shown that the developed TADF emitters are suitable for different color devices with electroluminescence ranging from blue to yellow and with brightness, maximum current and external quantum efficiencies exceeding 10 000 cd m⁻², 15 cd/A, and 7 %, respectively.     

Strongly Luminescent Tungsten Emitters with Emission Quantum Yields of up to 84 %: TADF and High‐Efficiency Molecular Tungsten OLEDs

Metal‐TADF (thermally activated delayed fluorescence) emitters hold promise in the development of next generation light‐emitting materials for display and lighting applications, examples of which are, however, largely confined to Cu^I and recently Au^I, Ag^I, and Au^III emitters. Herein is described the design strategy for an unprecedented type of metal‐TADF emitter based on inexpensive tungsten metal chelated with Schiff base ligand that exhibit high emission quantum yields of up to 56 % in solutions and 84 % in thin‐film (5 wt % in 1,3‐bis(N‐carbazolyl)benzene, mCP) at room temperature. Femtosecond time‐resolved emission (fs‐TRE) spectroscopy and DFT calculations were undertaken to decipher the TADF properties. Solution‐processed OLEDs fabricated with the W‐TADF emitter demonstrated external quantum efficiency (EQE) and luminance of up to 15.6 % and 16890 cd m^?2, respectively.     

Aggregation‐Induced Delayed Fluorescence Based on Donor/Acceptor‐Tethered Janus Carborane Triads: Unique Photophysical Properties of Nondoped OLEDs

Luminescent materials consisting of boron clusters, such as carboranes, have attracted immense interest in recent years. In this study, luminescent organic–inorganic conjugated systems based on o‐carboranes directly bonded to electron‐donating and electron‐accepting π‐conjugated units were elaborated as novel optoelectronic materials. These o‐carborane derivatives simultaneously possessed aggregation‐induced emission (AIE) and thermally activated delayed fluorescence (TADF) capabilities, and showed strong yellow‐to‐red emissions with high photoluminescence quantum efficiencies of up to 97 % in their aggregated states or in solid neat films. Organic light‐emitting diodes utilizing these o‐carborane derivatives as a nondoped emission layer exhibited maximum external electroluminescence quantum efficiencies as high as 11 %, originating from TADF.     

Constructing a Novel Dendron for a Self‐Host Blue Emitter with Thermally Activated Delayed Fluorescence: Solution‐Processed Nondoped Organic Light‐Emitting Diodes with Bipolar Charge Transfer and Stable Color Purity

Self‐host thermally activated delayed fluorescence (TADF) materials have recently been identified as effective emitters for solution‐processed nondoped organic light‐emitting diodes (OLEDs). However, except for the carbazole unit, few novel dendrons have been developed to build self‐host TADF emitters. This study reports two self‐host blue materials, tbCz‐SO and poCz‐SO, with the same TADF emissive core and different dendrons. The influence of the peripheral dendrons on the photophysical properties and electroluminescent performances of the self‐host materials were systematically investigated. The transient fluorescence and electroluminescence spectra indicated that the diphenylphosphoryl carbazole units could effectively encapsulate the emissive core to reduce the concentration quenching effect and to enhance reverse intersystem crossing. By using tbCz‐SO and poCz‐SO as host‐free blue emitters, the performance of the solution‐processed nondoped OLED device demonstrated that a more balanced charge transfer from the bipolar dendrons would offer a better current efficiency of 10.5 cd A⁻¹ and stable color purity with Commission Internationale de L'Eclairage units of (0.18, 0.27).     

Peripheral Amplification of Multi‐Resonance Induced Thermally Activated Delayed Fluorescence for Highly Efficient OLEDs

Multi‐resonance induced by boron and nitrogen atoms in opposite resonance positions endows a thermally activated delayed fluorescence (MR‐TADF) emitter with a strikingly small full width at half maximum of only 26 nm and excellent photoluminescence quantum yield of up to 97.48 %. The introduction of a carbazole unit in the para position of the B‐substituted phenyl‐ring can significantly boost up the resonance effect without compromising the color fidelity, subsequently enhancing the performances of the corresponding pure blue TADF‐OLED, with an outstanding external quantum efficiency (EQE) up to 32.1 % and low efficiency roll‐off, making it one of the best TADF‐OLEDs in the blue region to date. Furthermore, utilizing this material as host for a yellow phosphorescent emitter, the device also shows a significantly reduced turn‐on voltage of 3.2 V and an EQE_max of 22.2 %.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Synthesis and electroluminescent performance of thermally activated delayed fluorescence‐conjugated polymers with simple formylphenyl as pendant acceptor

Formylphenyl has been demonstrated to act as an acceptor to construct thermally activated delayed fluorescence (TADF) emitter, and therefore a series of the TADF‐conjugated polymers with formylphenyl as pendant acceptor and carbazole/acridine as backbone donor are designed and synthesized. All polymers involve the twisted donor/acceptor structural moieties with the sufficiently spatial separation between the highest occupied molecular orbital and the lowest unoccupied molecular orbital as well as a small singlet/triplet splitting, and exhibit the legible TADF features confirmed by theoretical calculation and their transient decay spectra. The solution‐processed organic light‐emitting diodes using neat film of the polymers as emissive layer achieve excellent performance with the maximum external quantum efficiency (EQE) of up to 10.6%, the maximum current efficiency of up to 35.3 cd A⁻¹ and the low turn‐on voltage of 2.7 V. Moreover, the EQE still remains 10.3% at the luminance of 1000 cd m⁻² with the low driving voltage of 4.4 V and extremely small efficiency roll‐off. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1989–1996     

Twisted penta‐Carbazole/Benzophenone Hybrid Compound as Multifunctional Organic Host,Dopant or Non‐doped Emitter for Highly Efficient Solution‐Processed Delayed Fluorescence OLEDs

A new multi‐functional penta‐carbazole/benzophenone hybrid compound 5CzBP was designed and synthesized through a simple one‐step catalyst‐free C—N coupling reaction by using 2,3,4,5,6‐pentafluorobenzophenone and carbazole as starting materials. 5CzBP is very soluble in tetrahydrofuran (THF), which brings an environmentally friendly device fabrication for solution‐processed OLEDs instead of most widely used chlorinated solvents when 5CzBP is employed as the bulk‐phase of organic host or non‐doped emitter in the emissive layer. 5CzBP exhibits thermally activated delayed fluorescence (TADF) characteristic with relatively high triplet energy of 2.60 eV and a low ΔE_ST of 0.01 eV. By using the new TADF material as organic host for another green TADF emitter, maximum external quantum efficiency (EQE) of 12.5% has been achieved in simple solution‐processed OLED device. Besides, a maximum EQE of 8.9% and 5.7% was further obtained in TADF devices based on 5CzBP as dopant and non‐doped emitter, respectively. The simultaneously acting as efficient TADF host and non‐doped TADF emitter provides the potential guidance of the future simple single‐layer two‐color white OLEDs based on low‐cost pure organic TADF materials.     

A Methodological Study on Tuning the Thermally Activated Delayed Fluorescent Performance by Molecular Constitution in Acridine–Benzophenone Derivatives

Thermally activated delayed fluorescent (TADF) emitters are usually designed as donor–acceptor structures with large dihedral angles, which tend to incur low fluorescent efficiency, and therefore, through molecular design various strategies have been proposed to increase the efficiency of emitters; however, few studies have compared these strategies in one TADF system. In this study, a novel TADF molecule, [4‐(9,9‐diphenylacridin‐10‐yl)phenyl](phenyl)methanone ( BP‐DPAC ), was designed as a prototype, and two derivatives, BP‐Ph‐DPAC and DPAC‐BP‐DPAC , were also prepared to represent two common approaches to enhance TADF performance. Compared with the maximum external quantum efficiency (EQE) of 6.82 % for BP‐DPAC , organic light‐emitting diodes (OLED) devices based on DPAC‐BP‐DPAC exhibited enhanced TADF properties with the highest maximum EQE of 18.67 %, owing to an additional diphenylacridine donor, whereas BP‐Ph‐DPAC showed non‐TADF properties and exhibited the lowest EQE of 4.25 %, owing to the insertion of a phenyl ring between donor and acceptor.     

Polyfluorene containing diphenylquinoline pendants and their applications in organic light emitting diodes

We present a short, efficient synthetic route for the preparation of a novel polyfluorene copolymer (PF‐Q) containing two electron‐deficient, 2,4‐diphenylquinoline groups functionalized at the C‐9 positions of alternate fluorene units that form a three‐dimensional cardostructure. The presence of the rigid bulky pendent groups leads to a polyfluorene possessing a high glass‐transition temperature (207 °C) and very good thermal stability (5% weight loss observed at 460 °C). A photoluminescence study revealed that the Förster energy transfer from the excited quinoline groups to the polyfluorene backbone is very efficient; it also demonstrated that the commonly observed aggregate/excimer formation in polyfluorenes is suppressed very effectively in this polymer, even after it has been annealed at 150 °C for 20 h. A light emitting diode (LED) device prepared with PF‐Q as the emitting layer exhibits a stable blue emission with a maximum brightness of 1121 cd/m² at 12 V and a maximum external quantum efficiency of 0.80% at 250 cd/m². We also used PF‐Q, which contains diphenylquinoline units that behave as electron‐transporting side chains, as a host material and doped it with 2.4 wt % of a red‐emitting phosphorescent dye, Os(fppz), to realize a red electroluminescence with CIE color coordinates of (0.66, 0.34). The doped device exhibits a maximum external quantum efficiency of 6.63% (corresponding a luminance efficiency of 8.71 cd/A) at a current density of 47.8 mA/cm², together with a maximum brightness of 10457 cd/m². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 859–869, 2005     

Integrating Asymmetric O−B−N Unit in Multi-Resonance Thermally Activated Delayed Fluorescence Emitters towards High-Performance Deep-Blue Organic Light-Emitting Diodes

Developing deep-blue thermally activated delayed fluorescence (TADF) emitters with both high efficiency and color purity remains a formidable challenge. Here, we proposed a design strategy by integrating asymmetric oxygen-boron-nitrogen (O−B−N) multi-resonance (MR) unit into traditional N−B−N MR molecules to form a rigid and extended O−B−N−B−N MR π-skeleton. Three deep-blue MR-TADF emitters of OBN , NBN and ODBN featuring asymmetric O−B−N, symmetric N−B−N and extended O−B−N−B−N MR units were synthesized through the regioselective one-shot electrophilic C−H borylation at different positions of the same precursor. The proof-of-concept emitter ODBN exhibited respectable deep-blue emission with Commission International de l′Eclairage coordinate of (0.16, 0.03), high photoluminescence quantum yield of 93 % and narrow full width at half maximum of 26 nm in toluene. Impressively, the simple trilayer OLED employing ODBN as emitter achieved a high external quantum efficiency up to 24.15 % accompanied by a deep blue emission with the corresponding CIE y coordinate below 0.1.     

Simultaneous Long‐Persistent Blue Luminescence and High Quantum Yield within 2D Organic–Metal Halide Perovskite Micro/Nanosheets

Molecular solid‐state materials with long‐lived luminescence (such as thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) systems) are promising for display, sensoring, and bio‐imaging applications. However, the design of such materials that exhibit both long luminescent lifetime and high solid‐state emissive efficiency remains an open challenge. Two‐dimensional (2D) organic–metal halide perovskite materials have a high blue‐emitting quantum yield of up to 63.55 % and ultralong TADF lifetime of 103.12 ms at ambient temperature and atmosphere. Our design leverages the combined influences of a 2D space/electronic confinement effect and a modest heavy‐atom tuning strategy. Photophysical studies and calculations reveal that the enhanced quantum yield is due to the rigid laminate structure of perovskites, which can effectively inhibit the non‐radiative decay of excitons.     

Solution-processed multi-resonance organic light-emitting diodes with high efficiency and narrowband emission

With excellent color purity(full-width half maximum(FWHM) 40 nm) and high quantum yield,multiresonance(MR) molecules can harvest both singlet and triplet excitons for highly efficient narrowband organic light-emitting diodes(OLEDs) owing to their thermally activated delayed fluorescence(TADF)nature.However,the highly rigid molecular skeleton with the oppositely positioned bo ron and nitrogen in generating MR effects results in the intrinsic difficulties in the solution-processing of MR-OLEDs.Here,we demonstrate a facile strategy to increase the solubility,enhance the efficiencies and modulate emission color of MR-TADF molecules by extending aromatic rings and introducing tert-butyls into the MR backbone.Two MR-TADF emitters with smaller singlet-triplet splitting energies(ΔE~(ST))and larger oscillator strengths were prepared conveniently,and the solution-processed MR-OLEDs were fabricated for the first time,exhibiting efficient bluish-green electroluminescence with narrow FWHM of 32 nm and external quantum efficiency of 16.3%,which are even comparable to the state-of-the-art performances of the vacuum-evaporated devices.These results prove the feasibility of designing efficient solutionprocessible MR molecules,offering important clues in developing high-performance solution-processed MR-OLEDs with high efficiency and color purity.     

Tailoring Extremely Narrow FWHM in Hypsochromic and Bathochromic Shift of Polycyclo-Heteraborin MR-TADF Materials for High-Performance OLEDs

Developing double boron-based emitters with extremely narrow band spectrum and high efficiency in organic light-emitting diodes (OLEDs) is crucial and challenging. Herein, we report two materials, NO-DBMR and Cz-DBMR , hinge on polycyclic heteraborin skeletons based on role-play of the highest occupied molecular orbital (HOMO) energy levels. The NO-DBMR contains an oxygen atom, whereas the Cz-DBMR has a carbazole core in the double boron-embedded ν-DABNA structure. The synthesized materials resulted in an unsymmetrical pattern for NO-DBMR and surprisingly a symmetrical pattern for Cz-DBMR . Consequently, both materials showed extremely narrow full width at half maximum (FWHM) of 14 nm in hypsochromic (pure blue) and bathochromic (Bluish green) shifted emission without losing their high color fidelity. Furthermore, both materials show high photoluminescence quantum yield (PLQY) of over 82 %, and an extremely small singlet-triplet energy gap (ΔE_ST) of 0.04 eV, resulting in high reverse intersystem crossing process (k_RISC) of 10⁵ s⁻¹. Due to the efficient thermally activated delayed fluorescence (TADF) characteristics, the fabricated OLEDs based on these heteraborins manifested maximum external quantum efficiency (EQE_max) of 33.7 and 29.8 % for NO-DBMR and Cz-DBMR , respectively. This is the first work reported with this type of strategy for achieving an extremely narrow emission spectrum in hypsochromic and bathochromic shifted emissions with a similar molecular skeleton.     

Highly Efficient Near‐Infrared Delayed Fluorescence Organic Light Emitting Diodes Using a Phenanthrene‐Based Charge‐Transfer Compound

Significant efforts have been made to develop high‐efficiency organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) emitters with blue, green, yellow, and orange–red colors. However, efficient TADF materials with colors ranging from red, to deep‐red, to near‐infrared (NIR) have been rarely reported owing to the difficulty in molecular design. Herein, we report the first NIR TADF molecule TPA‐DCPP (TPA=triphenylamine; DCPP=2,3‐dicyanopyrazino phenanthrene) which has a small singlet–triplet splitting (ΔE_ST) of 0.13 eV. Its nondoped OLED device exhibits a maximum external quantum efficiency (EQE) of 2.1 % with a Commission International de L′Éclairage (CIE) coordinate of (0.70, 0.29). Moreover, an extremely high EQE of nearly 10 % with an emission band at λ=668 nm has been achieved in the doped device, which is comparable to the most‐efficient deep‐red/NIR phosphorescent OLEDs with similar electroluminescent spectra.     

聚合物热激活延迟荧光材料的分子设计与器件性能

聚合物热激活延迟荧光(TADF)材料应用于有机发光二极管(OLEDs)中以来,取得了飞速发展,迄今为止已经报道了多种不同分子结构及性能优异的聚合物TADF发光材料.它们具有不含重金属的化学结构、100%的理论内量子效率和易于通过溶液加工进行大面积制造的优势.本文从分子结构和发光颜色2个角度总结了不同结构TADF聚合物的研究进展,重点介绍了我们课题组在长链型TADF聚合物设计与OLEDs器件性能方面的研究工作,探究TADF聚合物颜色调控与效率提升的途径,论述了TADF聚合物存在的问题与未来发展.     

以1,3-茚二酮为电子受体的热激活延迟荧光分子的合成及其在有机发光二极管中的应用

本文设计合成了一种新型电子受体2,2-二甲基-1,3-茚二酮,并将其应用于热激活延迟荧光(TADF)分子的设计中,合成了一系列具有不同发光性能的TADF分子:5-二甲基吖啶基-2,2-二甲基-1,3-茚二酮(IDYD),5-吩噁嗪基-2,2-二甲基-1,3-茚二酮(IDPXZ)和5,6-二吩噁嗪基-2,2-二甲基-1,3-茚二酮(ID2PXZ)。以IDYD为客体掺杂制备得到蓝光OLED器件,其CIE值为(0.27,0.31),最大外量子效率(EQE)为2.13%。以IDPXZ为客体掺杂得到橙光OLED器件,其CIE值为(0.43,0.53),EQE为1.31%。以ID2PXZ为客体掺杂得到黄光OLED器件,其CIE值为(0.41,0.54),EQE为2.55%。上述结果证明了以2,2-二甲基-1,3-茚二酮为电子受体可以得到不同发光颜色的TADF分子,并在全色OLED器件中具有一定应用前景。     

Constructing Charge‐Transfer Excited States Based on Frontier Molecular Orbital Engineering: Narrowband Green Electroluminescence with High Color Purity and Efficiency

The design and synthesis of organic materials with a narrow emission band in the longer wavelength region beyond 510 nm remain a great challenge. For constructing narrowband green emitters, we propose a unique molecular design strategy based on frontier molecular orbital engineering (FMOE), which can integrate the advantages of a twisted donor–acceptor (D‐A) structure and a multiple resonance (MR) delayed fluorescence skeleton. Attaching an auxiliary donor to a MR skeleton leads to a novel molecule with twisted D‐A and MR structure characteristics. Importantly, a remarkable red‐shift of the emission maximum and a narrowband spectrum are achieved simultaneously. The target molecule has been employed as an emitter to fabricate green organic light‐emitting diodes (OLEDs) with Commission Internationale de L'Eclairage (CIE) coordinates of (0.23, 0.69) and a maximum external quantum efficiency (EQE) of 27.0 %.